4L60e to 4L80e Transmission Swap - What to buy

Подписаться 57 тыс.

Просмотров 200 тыс.

50% 1

OTHER VIDEOS IN THIS SERIES:
4L60e to 4L80e Transmission Swap - What to buy - • 4L60e to 4L80e Transmi...
4L60e to 4L80e Swap - Making the Transmission Crossmember - • 4L60e to 4L80e Swap - ...
4L60e to 4L80e Swap - Installing a 4L80e Transmission on a 4X4 - • 4L60e to 4L80e Swap - ...
4L60e to 4L80e Segment Swap HPTuners - • 4L60e to 4L80e Segment...
LINKS TO EVERYTHING IN THIS VIDEO ........
Kooler Kleen Transmission Cooler Flush amzn.to/34dBMIq
ACDelco D2263C GM Original Equipment Park/Neutral Position amzn.to/37sVodM
4L60e to 4L80e Transmission Plug and Play Adapter Harness LS Swap amzn.to/2XAZMTk
Lokar XTD-3518FM Firewall Mount Transmission Dipstick for GM 4L80E Transmission amzn.to/2OACTLL
Hughes Performance HP4004X SFI Rated Flexplate (Dished) - amzn.to/337q4Od
Bolt Kit for GM Three Bolt Patter Torque Converter amzn.to/34i3fZO
Or if your Torque Converter has 6 bolts get this: ATP Automotive Z-270 Automatic Transmission Flywheel Flex-Plate amzn.to/2reKLKU and this ARP 2307305 Pro Series Torque Converter Bolt amzn.to/2D7Isfp
ACDelco 15724745 GM Original Equipment Transfer Case Adapter amzn.to/2pHvCkZ
32 spline input shaft transfer case (make sure to get the right one for your transfer case) amzn.to/2XCxcB7
ARP 2307305 Pro Series Torque Converter Bolts amzn.to/33cvveW
GM 15765623 COVER, Bellhousing Dust Cover amzn.to/2rkFnFX
HP Tuners M02-008-02 amzn.to/346R95v
6AN 20Ft Universal Braided Oil Fuel Line Hose Stainless Steel Nylon w/10PC Swivel Fitting Hose Ends Adapter Kit amzn.to/34nJwYk
Transmission Depot Inc www.transdepot.net
Circle D www.circledspecialties.com/
Universal Service (Driveshaft Repair) 704-598-7282
4L60e Removal Videos • 4L60-E Transmission Re...
Did you like this video? If so, please consider becoming a Patreon Member to support this channel. It will help me bring you more videos like this. Here is the Patreon Link: / tahoesteve
$2300 trans
$800 Circle D 3000-3200 Torque Converter with Billet,
$100+ for the wire harness,
$100+ for the flexplate
$100+ for the front drive shaft
$100 to have rear drive shaft shortened
$50 trans cooler lines
Crossmember - Free (but I already owned a welder)
I already had HP Tuners to do the swap, but this needs to be considered in your budget to either buy it, or have someone do the segment swap for you.
$100+ ??? NSS, Transfercase adapter, bolts, gaskets, dipstick tube
And don't forget how expensive all that ATF is.

Авто/Мото

Опубликовано:

20 ноя 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 319

@TahoeSteve 4 года назад

Links to the stuff in this video on Amazon in Description above.

@benpeters9538 3 года назад

Just a quick question, not trying to talk down on this setup but wouldn’t it be easer to just have a 4l60e built to hold more power. No hate just wondering.

@joshvanderwal6718 3 года назад

Ben Peters no because the 4l60e is junk that’s why everyone swaps them no matter how you build them they always shit out 3rd and 4th

@carolinawestern3875 3 года назад

Dealing w/a similar issue. Customer brought in a 07 chevy 1500 4x4 (6.0) 4L70e tranny is shot & can't find one for a decent price. Have access to a complete 2000 chevy 2500 4x4 (6.0) w/a 4L80e. What all can I use from the donor truck?

@pmotorsports8276 3 года назад

@@benpeters9538 still won't last as long. By design the 4L60E uses all of the forward clutches twice. So you get 1/2 the life of the 4L80E

@pmotorsports8276 3 года назад

@@carolinawestern3875 everything except the rear driveshaft

@bryanrose20 4 года назад

Not even 5 minutes in and I figured out the easiest way is to sell the 1500 and buy a 2500 😂😂

@TahoeSteve 4 года назад

you might be right

@classiccam4647 4 года назад

Apparently u don’t like to get ur hands dirty😜😂

@forresterpaige7767 4 года назад

Truth lol it’s not that bad tho

@kevinh845 4 года назад

So what my 2500 has a 480?

@bryanrose20 4 года назад

Slim Junior 4L80 yes

@WoahVinnie 4 года назад

Excited for this! I replaced my 4l60e with a replacement on my avalanche. I did it on my back, no lift only stands. It was scary, never did anything like this work before. Week before christmas last year took 4 days for out, in, running. I became very confident. Good luck and I cant wait to see this completed!

@IEraiderfan 4 года назад

Looks good Steve I am looking forward to the installment thanks for posting.👍👍👍👍

@lahejmalih4170 3 года назад

First of all I would like to thank you Tahoe Steve for the hard work on this video , this video is very helpful and made me solve all my problems , Thank you again for the great work

@TahoeSteve 3 года назад

Really appreciate your comment. I'm glad to have helped.

@alshotrodgarage4779 3 года назад

I like your commitment to doing research before starting the process! Nice video...

@TahoeSteve 3 года назад

Thank you!

@reece8355 3 года назад

Man thanks so much u helped me a lot

@mattblack133 Месяц назад

Great intel brother!!! 🤙

@micahhaislett3792 3 года назад

Thank you for making this.

@TahoeSteve 3 года назад

My pleasure!

@maadracingvideo74 Год назад

Very put together video, thanks for sharing your studies my friend 👍🏻

@Varela_39 4 года назад

Thanks for the video man, I’m currently going through doing the 4l60/4l80 swap on my truck . This was 100% helpful

@TahoeSteve 4 года назад

So glad to be of help! Keep me posted on your progress!

@kennethjones7239 3 года назад

Lots of good, useful information. Thanks.

@TahoeSteve 3 года назад

Glad it was helpful!

@growlith6969 3 года назад

Insightful, thanks for putting this out there. Really weird that the aftermarket hasn't made a whole kit for these vehicles. I did find a 2wd crossmember that just bolts in, but did not see a 4wd version. Seems like it would be a money maker for a performance company to put all of this together.

@Doesntmatteratall Год назад

Very helpful I hope to do this to a early 2000s stock power Tahoe

@MichaelGedies 4 года назад

This is great, looking forward to part 2

@TahoeSteve 4 года назад

Thanks for watching!

@mistym.5443 4 года назад

Great Video ~ Congratulations and best wishes for your next adventure!

@TahoeSteve 4 года назад

thanks for watching!

@karlhubbs3238 3 года назад

Intelligience is explaining things simply and straight forward. So people understand. That's sincerity. Playing with stupendous words is flashy and useless most of the people egotistical. Thanks for your good work!

@TahoeSteve 3 года назад

Thanks so much for the comment, much appreciated. I don't have an stupendous words, lol!

@jamest.5001 4 года назад

Thanks, It was everything I needed to know!

@TahoeSteve 4 года назад

So glad to help

@johnsonjeremiah74 4 года назад

Good info on the flywheel. I was curiois about all that. Good stuff 👍👍👍

@TahoeSteve 4 года назад

Glad you liked it!

@angelbernes7585 4 года назад

Very useful information. Thanks for sharing

@TahoeSteve 4 года назад

Glad it was helpful!

@BigMike-dm4oy 4 года назад

Great Video Steve, I also am getting ready to do the swap in my 03 Avalanche. Great info thanks for sharing!

@TahoeSteve 4 года назад

Thank you so much for watching!

@geneuriarte5462 4 года назад

Thanks for the video man!

@TahoeSteve 4 года назад

Thanks for watching!

@tripled8725 10 месяцев назад

thanks for video and the resources, i was able to do my swap in 1 week!

@JIM-dz1es 3 месяца назад

Had any issues since?

@custominteriors980 2 года назад

Good explanation!! New subscriber!!!

@connorsmith1224 3 года назад

Grate video told me everything i needed to know

@TahoeSteve 3 года назад

Glad to help

@wereexpertstoo3795 4 года назад

I'm about to do this - very helpful.

@TahoeSteve 4 года назад

Thanks for watching!

@tracyjames4125 2 года назад

Thank u so much for doing & sharing all ur research just to help others like me, subscribe 100% for sure! This is awesome! Thank u again sir, God bless

@kevinh845 4 года назад

Dude awesome. Thank you.

@TahoeSteve 4 года назад

Glad to help!

@irontownartfabrication9164 Год назад

Great job.

@dickhertz5973 8 месяцев назад

Nice work, what I have in mind is a 6.2L with a 4L80 from a Yukon 2wd going into my 2004 Silverado 2wd that currently has a 5.3 with the 4L60.

@owenfranklin814 2 года назад

Dude thank you so much

@danolfert1349 3 года назад

Very good info thank you

@TahoeSteve 3 года назад

Very welcome

@ortsd 4 года назад

Thats an awesome video! thank you so much for puting all the puzzel parts together. blown my 4L60E for the 3rd time, on my 94 sonoma and looking for the same swap. info is hard to collect. thanks again!

@TahoeSteve 4 года назад

Glad it helped!

@Killian665 4 года назад

This video series on the swap is perfect. I have an 04 Suburban turbo build that’s also 4wd. It’s been kinda hard to find good info on the 4wd swap since most everyone is doing 2wd.

@TahoeSteve 4 года назад

So glad to be of help

@donnychevrier4577 Год назад

Thank you for all your information helped out quite a bit I don't think my friend's going to want to do all that to her truck

@TahoeSteve 11 месяцев назад

Totally worth it if you're pushing the horsepower.

@diversedad7954 3 года назад

I'm building a 66 C10 SWB and planning a 5.3 LS swap and have been considering doing the 4L80 for it also. This will be a cruiser truck on bags. I plan to keep the 5.3 stock with the possible exception of a mild cam for a little power and sound. It's going to be a nice weekend cruiser but I'm building it to be able to drive everyday if I wanted to and also on occasion pull a small trailer. I'm fairly certain I won't ever see the benefits of converting this truck to 4L80. I think the 4L60 will be just fine for my needs. Then again, this is a full build and I'm gonna have to do custom driveshaft and cooler lines and all that anyway so I'll just have to weigh the costs when I get to that point.

@bryanroupe8646 4 года назад

Damn you balled out. I did my swap from market place lol. The only things knew I bought was the transgo kit and had to have shaft shortened. Already had HP tuner. Everything else was used. I know a guy with stock 4l80 and a transgo kit running low 9s in a 3400 car. They are strong even in stock form. I'm going to be putting one behind a sbf when i get the parts together.

@TahoeSteve 4 года назад

Best of luck with your build!

@djbiggz7960 4 года назад

Great video

@TahoeSteve 3 года назад

i appreciate that

@wdlandscaping4068 Месяц назад

Nice video thank u

@josebrea4115 3 года назад

Thanks to you & the helpful info, just finished my swap from 4l60 to the 4l80. keep up the good work. Kudos from Anchorage, Alaska

@TahoeSteve 3 года назад

Awesome! Thank you!

@608Ralphy 3 года назад

How was it? Did you do it yourself? Total price?

@alfonsocastillo502 2 года назад

awesome video! thank you so much, you definitely helped!!!

@TahoeSteve 2 года назад

So glad to help! Thank for watching

@thedarkdevil8868 2 года назад

@@TahoeSteve Thank you for the video I just purchased a 03 sierra 4x4 with the 4l60 and 5.3. I'm going to swap to a 6.0/4l80E and your video answered the rest of my questions. But my next question to you is do you know the model number of your transfer case? Is it a 246? Which in assuming before I buy the rebuild parts for my transfer case and the input shaft to fit the 80 I want to make sure you have the 246 transfer case that will complete my build thanks again

@danshim2644 3 года назад

You the man.

@TahoeSteve 3 года назад

appreciate that!

@jaylenmyjj695 Год назад

Thanks man I have a 2005 Chevy Silverado with a stage 2 Cam and I want to take my 4L60E out and boat up my 4L80E because all I've been having was trouble a lot of people told me that no matter what I do to the 4L60e i will always have problems with it I put an H2 shift kit in it and a super servo and the red high clutches and I'm still having problem with it slipping on me after a while

@juliansdiamonds Год назад

Thank you so much!!!!

@shawnc1716 3 года назад

I'm glad I seen this been wanting to for a wile and I work in hudson FL so that's a awesome deal that's were il get transmission I have a supercharger coming in mail bow so need soon

@jojoglemond Год назад

Nice presentation

@TahoeSteve 11 месяцев назад

Thanks a lot

@Stuart_Houston 3 года назад

Do you have to change the shifter in the steering column? Does the cable move the same distance for each gear in each trans?

@HeavyChevy32 6 месяцев назад

Michigan Motorsports tuned my truck. EXCELLENT crew over there

@HeavyChevy32 6 месяцев назад

Also, I work for AAM. Guanajuato makes good parts.

@juliansdiamonds Год назад

YOU MY FRIEND, ARE A FREAKIN GENIUS !!!!!! THANK YOU FOR THIS. I'm hoping to do my 2007 suburban.

@Kyle-ev4fk Год назад

Did you go thru with the 4l80e swap?

@juliansdiamonds Год назад

@@Kyle-ev4fk good day. Not yet. In the middle of a 2010 subaru engine swap.

@Kyle-ev4fk Год назад

@@juliansdiamonds I don't think the Subaru engine is a good swap for Suburban.😂

@juliansdiamonds Год назад

@@Kyle-ev4fk 😂🤣 you are correct. It's a subaru to subaru engine swap. Although I would do a suburban engine swap to the subaru, that would make it so much more reliable 😂😂🤣

@alexduke5402 2 года назад

Thank you

@nathanpearce7169 2 года назад

Perhaps I missed it but how did you adapt to the old transfer case

@averagejoesgarage8335 Год назад

Amazing

@markrawlinsjr6118 3 года назад

Where does the second speed sensor on the tranny get wired into if u buy the harness adapter

@Pitman556 Год назад

Is the transfer case the same? On the 99-06 Silverados?

@everydaycar3518 2 года назад

My 97 gmc if for right in everything hooked up but the 4x4 won’t kick in

@irarobinson7712 Год назад

Are the measurements right on the driveshaft length?

@RafikiJones6447 2 месяца назад

Instead of reusing a mp3023 Transfercase originally mated to the 4l60(27 spline). You can opt for a NP263HD (NP1) transfer case which came in the 6.0 2500 trucks which are known to be much more stout 👍

@RedneckMudder88 3 года назад

What would ya do about an 98 gmc 4l80e swap for that year. I need better pulling power.

@jsavage9134 3 месяца назад

Can you also just swap to the 4L80E Transfercase instead of using an adapter plate to use the transfer case to re use a 4L60E or what would be the hold up From just going with the Transfercase to match the 4L80E?

@FFMotorsports22 3 месяца назад

Okay so first question because I’m getting ready to buy all the parts to do this you mentioned 27 spline and 32 spline and swapping out an input shaft ? So are you saying I have to use the 4l60 transfer case and swap out the input shaft or can I not use the 4l80 transfer case ?

@patrickgagne8795 3 года назад

Oh man..I'm not religious but god bless you brother. I'm looking to swap the trans in my 1991 m998 and gone through countless forum post. Finally narrowed it down to do the 4l80 over the 700r4 but then that opens up a can of worms. Very helpful video. You have a new sub.

@TahoeSteve 3 года назад

It means a lot to get comments like this. It makes all the hard work and effort worthwhile, I appreciate you I'm glad I was able to help.

@normanthompson4729 3 года назад

What do you charge for a copy of your notes or instructions to do the swap.

@shawnc1716 3 года назад

I talked with the place in hudson for transmission asked for same transmission setup. And he gave me a quote for twice what you paid for transmission its like 4,200 so that suxs for me

@connectedevolution 2 года назад

I want to change the transmission and potentially convert a 1500 van to 4x4. Probably not worth it, but if I ever have enough money to cover it I would like to. I might just have to wait and buy a newer 2500 to convert to a 4x4

@philipdangerfield743 4 года назад

How did get your speedometer to work. I did a ls swap on a 94 Chevy truck and I can't figure out how to get the speed signal to my instrument cluster.

@bryanblood7063 4 года назад

Thank you for the video I've been wanting to put a 4l80e on my 95 k1500 I'm sure itll be different but still I'm further after watching this video. Its was awfully thoughtful because I'm sure its took a while to find all the stuff. You also even said where you ordered everything how much was the 4l80e from the place you bought it from. Also was the specs on the transmission whst it initially came with when they built it or did you get it built with stronger things or was just the 27 spline adapter the only thing cause I'd like to go with the adapter installed.

@TahoeSteve 4 года назад

From memory, the 27 spline adapter was the only thing I added. But, I did replace the torque converter that came with it to a really nice one from Circle D.

@lgbfjb48 2 года назад

"Look at this photograph. Everytime I do, it makes me laugh.."

@dannym5106 3 года назад

Amazing amazing video, I was just wondering if a 310 mm stall will work on my truck. Not sure what the size difference is between the 278 or if it’s different. Thanks in advance

@TahoeSteve 3 года назад

So glad you liked the video. The number represents the diameter in mm. Call Circle D, they are very helpful and will recommend what's best for your application.

@Nealy165 Год назад

Do you know the length of your driveshaft now?

@justinpittman8143 4 года назад

Great video. I just don't see anything on where you got the front drive shaft from?

@TahoeSteve 4 года назад

I don't think I mentioned it. I just gave the part number so you can get it wherever you want to.

@speedbuggy7240 3 года назад

Tahoe Steve great vid. I really appreciate you taking the time to make the vids on the 4L80e swap.. Did your tahoe come with the 4L60e or did you put it in? If you installed the 60, how did that go? I have a 69 chevy heavy 1/2 ton 4x4 that I want to put a 4L80e into, but I already have a 4L60e with less than 20k miles on it and rite now it would be cheaper. And I have a LS 6.0 as well. I want to put them both into my 69 with my original transfer case, unless I can get an used 80e before hand. I'm not sure what the transfer case is, but I'm pretty sure it's a gear to gear transfer case. Do you have any advice or recommend any vid that could help me?

@TahoeSteve 3 года назад

Mine came with a 4L60e. Blew it up the first time and reinstalled it will all the upgrade goodies. Blew it again and said enough! 4L80e is amazing and I don't have to cringe every time I stomp on the gas.

@alejandrorosas50 2 года назад

Hey man I’m doing the 4L65 to 4l80 But I wanna keep the flex plate that the 4l65 has which bolt patter do I need to order on my torque converter the 3x10.75 or the 3x11.066?

@orlandovasquez4639 3 года назад

Do you have a link to the 80e spacer? I have a 5.3 I’m wanting to mount to it but I can’t figure out what part number I need for the spacer and bolts, motor is out of a 2005 Silverado and 4l80e is from a 2002, all the ones I find it shows for older model 4l80, any help would be appreciated thank you

@thebigbadraider2828 4 года назад

The information in these videos will it help my swap my 99 suburban or are the trucks to much different

@TahoeSteve 4 года назад

I'm not sure, hopefully someone will chime in......

@jjones7915 Год назад

Wat about the early 2000 silverado wit staggered crossmember how are people solving this problem other then do some fabricating,is there a crossmember made for these trucks yet

@bryancummins5989 Год назад

yes their is can find super cheap ones on ebay.

@Boostededdy 3 года назад

Question, for the flex plate I know the ls1’a had a dished one... would that work as well for not needing a spacer?

@TahoeSteve 3 года назад

Mine was dished and did not need a spacer. Just make sure you select a torque converter that fits the bolt pattern. Call Circle D. They will lead you down the right path.

@brandonalexander9562 3 года назад

Well we know it’s bulletproof. Missed out on an 80 a few months ago. On my 2nd “rebuilt” 60 that just blew up in the suburban...done!

@TahoeSteve 3 года назад

Yeah, i blew my 60 twice before switching. Never looked back since and don't cringe every time I stomp on the gas.

@Cheyo414 2 года назад

@@TahoeSteve we’re those 60s built? Or stock?

@TahoeSteve 2 года назад

1st stock. 2nd built.

@Cheyo414 2 года назад

@@TahoeSteve I’m trying to decide on a built 4l60 or 4l80 but I want to know if it matters for 4x4 trucks. Because I have the manual switch not the button switch

@1fastbuggy502 2 года назад

Great video Steve . If I cut the cross member to relocate for the trans mount . How far do I need to move it from the original location backward ?

@kristymoore4522 2 года назад

Did you ever get this answer

@1fastbuggy502 2 года назад

@@kristymoore4522 No. When I installed my cross member .I just cut the front transfer case mount bracket off. New location for mount was directly on the cross member it self .I just had to make excess holes on the bottom of cross member so that I could get at bolt heads for the mount/

@1fastbuggy502 2 года назад

@@kristymoore4522 Also I used the plug and play wiring harness adapter from PCM of NC Part# P-120021

@eliforbes4842 2 года назад

Making me rethink an 80e swap...

@Hitman-ds1ei 3 года назад

Did you investigate the cost difference between 4L80E and upgrading 4l60e with all the Sonnax parts

@TahoeSteve 3 года назад

I spent half to rebuild my 4L60 and blew it up, TWICE! Now i can hit the gas and never cringe about leaving a transmission on the highway. Cant put a price on peace of mind.

@ethanolchandlier5942 4 года назад

Hey Tahoe, I am having crazy proble.s with a fresh rebuild 4l60e no miles on it. Wont start off in 1st wont manual shift to first, floats on 2nd. Replaced and adjusted neutral switch, swapped solenoids, cleaned shuttles and valve etc. Nothing working.

@TahoeSteve 4 года назад

I had a shop do mine, the only thing I did was pull it and put it back. Auto Transmissions still remain a complete mystery to me.

@bbdbkd 3 года назад

Was that 1 11/16s the correct amount to shorten the rear driveshaft?

@TahoeSteve 3 года назад

it did work for me. over a year and no problems.

@Jeremia1.5 3 года назад

Can't you just use the same bolts for the flywheel you have listed we can get on Amazon? The bolts that comes off the the original 4l60e flywheel?

@TahoeSteve 3 года назад

Are you using a dished flywheel with the 3 bolt pattern TC?

@brandonfarmer7446 3 года назад

What is the cost of doing the sway I'm on the the fence about doing it on mine vs having mine beefed up

@TahoeSteve 3 года назад

www.summitracing.com/search/part-type/transmission-crossmembers/transmission-type/4l80e

@e.v.a.l.s 4 года назад

Cool video, awesome project. Can't wait to go through your channel and see how this is coming along or if it's finished. One thing that I don't understand is how can a man who can figure out how to go through all this information and work, not figure out how to get a man's haircut?

@TahoeSteve 4 года назад

Covid-19.

@itzjusnick 4 года назад

Tahoe Steve. I have just completed my swap. But I'm running into what I believe is some tuning issues. I'm getting 2 codes after po745 and po840 I believe. Can you provide any info on what you did for the tune?

@TahoeSteve 4 года назад

Yes, check this out: 4L60e to 4L80e Segment Swap HPTuners - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oKShE4rpsA0.html

@pmotorsports8276 4 года назад

You paid extra for a custom converter to match your flexplate, then replaced the flexplate anyway?

@TahoeSteve 4 года назад

I did not mind paying extra for a bullet proof converter from a quality manufacturer. The upgrade was the billet front end, the matching bolt pattern was a bonus. The holes in my old flexplate were oblong and the flexplate slipped a little in the holes, so yes, i got a new one.

@jammy46235 2 года назад

Is there any difference in flex plates or are they universal thanks

@timwainz 2 года назад

4l80e has a 6 bolt flex plate. 4l60e has a 3 bolt.

@karlhubbs3238 3 года назад

Hey Steve have an AWD original tranny 4l65E I'd like to do this swap but have AWD not 4x4. Also towing a lot that's why I like this. You said won't hit race track. Well I'm in toronto and limit is 100km is limit but everyone goes 120 and if you don't keep up horns start popping if you hear me. How slow to say is it. I mean acceleration not that big of a deal top speed wondering though?

@TahoeSteve 3 года назад

I have had no issues with top speed. The thing is perfectly happy at 90 mph (144km) so unless I misunderstood your question, there should be no issues.

@johnfranks7383 3 года назад

Tahoe Steve hey, I was wondering what is the part number for the new trans harness from Michigan motors?

@markb4448 3 года назад

Wanting to do the same right now on my Avalanche I cannot keep the 4L60E going even beefed up build it just popped the trans pump Im running big 38.5X15.5X18 Toyo Open country tires with 12" wide wheels so thats a bit heavy. Maybe I need the Stage 2 4L80?

@ELITEFLEET554 2 года назад

I know it's super late but s stock 4l80 can handle that no problem maybe just a hd2 kit

@Huckyuu 4 года назад

I’m interested in either a 4L80e swap or a 6L60e swap, have you done any research into a 6L60 swap I couldn’t find much other than people looking for info same as me, mainly want a 6 speed for the fuel mileage and long uphills

@TahoeSteve 4 года назад

I'm sorry, I did no research on the 6L60e. Perhaps someone else can chime in .

@adammancilla4774 Год назад

What do I need to make 4 x 4 transmission to 2 Wheel Drive Already removed the transfer case

@lawrencemeehan2097 Год назад

A 2wd transmission and driveshaft.

@redneckgames151 Год назад

Unfortunately not possible, best to find someone that wants to trade a 2wd for a 4wd trans.

@dallasdelano8235 4 года назад

I have a 1998 silverado with a 4l60e (3-4 clutch pack worn out). I found a cheep 2001 4l80e on Facebook, and I don't know if I should rebuild my 60e or install a 80e.

@lawrencechaplin6983 4 года назад

Same here

@kevinh845 4 года назад

I’m thinking too. Seems like a process.

@TahoeSteve 4 года назад

Guys, no lie - it's a PITA (pain in the ass). BUT - it is SOOOOOO worth not having to worry every time you want to pull something,or simply just stomp on it.

@daquellejones264 4 года назад

Was that the proper transfer case adapter?

@TahoeSteve 4 года назад

Yes. ACDelco 15724745 GM Link above

@makeonenine 3 года назад

Will a 4l60e out of a 2007 Yukon xl 4x4 work in a 2003 Chevy Tahoe z71 4x4?

@TahoeSteve 3 года назад

not sure. hopefully, someone will chime in.

@dalebills9470 3 года назад

Yes it will

@joshtribble9612 4 года назад

Can you get me a part number for the hardened 27 spline output shaft you had put into your 4l80e build?

@TahoeSteve 4 года назад

I'm not sure, this is something Transmission Depot did for me. Give them a call, they are super helpful.

@joshtribble9612 4 года назад

@@TahoeSteve you said inthe video they gave you option for 27 spline transmission output shaft. So you wouldnt have to change out your transfercase input shaft.

@joshtribble9612 4 года назад

8 minute mark is where you mentioned it

@hitmanshadowrecon9017 2 года назад

I have a 2000 suburban which I'm going to do a 6.0 and 4l80 swap. I already have the motor, tranny, and transfer case. Any advice?

@darkshadow5730 Год назад

Did you get yours done? I went to put in transfer case and its a tight fit between transmission and torsion bar cross member

@hitmanshadowrecon9017 Год назад

@@darkshadow5730 Yea, I had to remove the top 2 studs to slide the transfercase in. I replaced them with bolts.

@darkshadow5730 Год назад

@@hitmanshadowrecon9017 im refering to the crossmember holding the torsion bars in the transmission support cross member is out

@hitmanshadowrecon9017 Год назад

@@darkshadow5730 That's exactly what I'm talking about. My transfer case wouldn't fit because it would either hit the torsion bar crossmember or get stuck on the studs coming out from the top of transmission. So I removed those studs from the top of tranny, then I stuck the rear of the transfer case up above the crossmember as far as possible. That allows just enough clearance so when you raise the front of the transfer case you can now put it on the remaining studs. Replace the studs you removed with bolts of the same size. I hope that helps.