If you hear that the freshener is not giving enough pressure to spray the canister, perhaps this method might work for you: I had the same problem, tried everything on here but failed. IF possible, put fresh batteries, then get aluminioum foil roll it into a doughnut shape and put it on the base/cradle that holds the canister inside. then put the can in and force the top to close. I think what is happening is the cradle keeps flexing every time the lever activates pushing the canister down which causes the lever to barely touch it. See if that works. Cheers
The metal doughnut worked for me! Another thing I noticed was that this issue occurred with the refill (Glade) that I was using. I'm guessing that the size of the Glade refill may have been too small for the Air Wick dispenser or something of that nature. However the "doughnut booster seat" works. Thanks!
YES!!! This worked for me, it was like magic 🎩 ✨️...lol. I had 3 of them acting same way, but after doing the donut shaped foil, they are all working fine 🙂. Thank you @darkevilpoet
I have a problem - it seems to rotate in one direction and does not return. As a result, it does not press on the can. Tell me what could be the reason?
Good info! I figured something else out as well... if ur plunger isn't going all the way down, put something 'sturdy' under the canister to raise it up slightly!!! Different brand canisters aren't the same height so some will fit perfect and some wont...
I have a problem - it seems to rotate in one direction and does not return. As a result, it does not press on the can. Tell me what could be the reason?
I have a problem - it seems to rotate in one direction and does not return. As a result, it does not press on the can. Tell me what could be the reason?
Ours works but it is so enthusiastic that every time it give a spray the whole thing comes apart and leans over. Any suggestions , apart from the bin!!
I just bought a Airwick freshner,the first day its works fine but the second day the freshner automatically pull up when it's spray and stopped afterwards. Do you have any solution for this?
I had the same problem, tried everything on here but failed. What got mine to work was putting fresh batteries then get aluminioum foil roll it into a doughnut shape and and put it in the base/cradle that holds the canister then put the can in and force the top to close. I think what is happening is the cradle keeps flexing every time the lever activates pushing the canister down which causes the lever to barely touch it. See if that works. Cheers
I have a problem - it seems to rotate in one direction and does not return. As a result, it does not press on the can. as if the polarity has been reversed. Tell me what could be the reason?
Just bought new airwick freshener, but didnt working ..the plunger go up instead go down , i think maybe bcoz of the wheels prob .. just wasting my time ,, this second time im having same pb… wont buy it anymore😡😡😡
our problem is, the motor seems to have not anymore power (even with new batterys) to move the wheels also the red switch doesnt move back, should the wheel not spin back ? it does move, but very very powerless, the motor dont get much power.
I found the problem! The can was too empty, which I used for testing, it needs a can which have enough pressure to push the red lever back. So I wasted my time with complete open the sprayer :P Now I know, its important to have a good filled can and also make sure to push the red lever back.
Try to raise up the can putting a flat object at his base. In this way the lever has no troubles to push the spray. Different brands cans have slightly different heights.