Actually the accumulator is located after the condenser right and it's purpose is use to store excess liquid refrigerant...so then y the accumulator connection is given after the evaporator and at the outlet of the evaporator it will be vapour right??
After condenser is liquid reciver usually used fo storing refrigerant during pump down and during normal cycle it lets refrigerant in liquid state to pass to dryer. On suction before compressor Is accumulator it only let's refrigerant in vapor state enter into compressor, to prevent any damages to compressor.
The accumulator placed before the compressor, suction side of the compressor is connected to the accumulator , and it helps in two ways , 1. excess oil won't come to compressor 2.cooled liquid won't come to the compressor, if it is directly connected the compressor would die
Sir hnd bumababa temp ng meat at fish kulang sa lamig pero ang veg ok nmn tpos wlang ice build up sa evaporator ung refrigerant is half level is it txv replace or adjust?? Or what other causes bkt d lumalamig ok nmn watertight doors sealed
@@leckyjake bale nung nalaman ko na d nag low temp ang reading at -2 at -3 lng ang meat at fish nag ice kunti ang evaporator then binanlawan ko mbuti aun hanggang -9 at -12 lng nag bago nmn kht kunti tpos pumapara na ung sa meat pag na reach nya ung -9 nkita ko pumara solenoid then again hanggang -9 pa din after
@@leckyjake nagsimula sya nung nag provision kmi 5 hours un nkapara ang pinara ko lng is liquid solenoid valve switch hnd ko na pinump down kc gnun dn nmn gngawa ko before ok nmn
good day sir... anu kaya probable cause n nwala ung oil at refregerant s AC nmin onboard..we already check the possible leak pro wala kmi makita..any suggestion guys..salamat
