All-In-One Toilet Installation Kit

Подписаться 5 тыс.

Просмотров 92 тыс.

50% 1

The All-In-One Toilet Installation Kit includes the Perfect Seal Wax Ring and Zero Cut Toilet Bolts, taking the guesswork out of toilet installation. The Perfect Seal is a universal toilet wax ring that works with most drain sizes and flange depths. Whether the flange is ½ inch above the floor or 1-1/2 inches below, the Perfect Seal guarantees a perfect seal every time. The patented design combines specially designed rubber gaskets with encapsulated wax that forms a seal three times stronger than a wax ring without the mess and allows the toilet to be repositioned if needed during installation. The Zero Cut Bolts eliminate the hassle of typical toilet bolts that are too long, wobble and are difficult to line up when setting the toilet. The universal bolts work with flanges above or below the floor and can be adjusted in height from one inch to three inches without cutting, removing the threat of chipping or cracking the toilet due to over tightening. The sliding adapters tighten the bolts and attach the low-profile bolt caps. The All-In-One Toilet Installation Kit makes toilet installation easier.
Subscribe to checkout our How Tos & new products » bit.ly/Dancosub
All-In-One Toilet Installation Kit » bit.ly/3gbUhn3
SHOP:
Home Depot » thd.co/2WY7OY1
Lowes » low.es/3bWmkng
Amazon » amzn.to/2LNPlXy
Walmart » bit.ly/3jZDjda
RELATED PRODUCTS:
Zero Cut Bolts » bit.ly/3cW5kPg
Perfect Seal Wax Ring » bit.ly/2zopWkx
SOCIAL MEDIA:
FACEBOOK » bit.ly/DancoFB
TWITTER » bit.ly/DancoTweet
LINKEDIN » bit.ly/DancoLinked
WEBSITE » www.danco.com

Хобби

Опубликовано:

14 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@garybarker4481 2 месяца назад

This is the best Danco explanation of their product ! If the flange is above or level with the floor, you can remove the blue. If the toilet rocks, remove the black.

@jimstevens1726 2 года назад

I just bought the Danco Perfect seal at Home Depot. They did not have the All In One kit.

@lukedorsett Год назад

Did work, too bulky. The toilet couldn't set flush to the floor. Removed blue top and black plastic as described, but didn't solve the issue. Have to remove and go back to a traditional wax ring. Perhaps it works well in other situations, but seems incompatible with my new Kohler toilet.

@titleistprov69 8 месяцев назад

Excellent product. First time pulling a toilet and this made it very easy

@AZ_sunshine Год назад

excellent video covering everrything to help people like me re-installing ring the first time.

@SolBuxani Год назад

Followed instructions, so far looks good. Thank you.

@harrisond8132 Год назад

Do you have to use the "low profile cap". What if your toilet isn't white?

@erickmonge3632 Год назад

Does it work with a lead bend flange?

@adamd6853 10 месяцев назад

Does this work with pressure assist toilets?

@jerrytraylor5779 11 месяцев назад

I have copper Drain dose the black plastic ring inside go down to the drain pipe. Seems like it won't go down far enough

@ellenrobison9717 Год назад

Easy to install. Let's just hope this fixes our issues.

@danielvanduyne3039 Год назад

When my toilet wasn’t flush I then went on to remove the black piece but the wax was messed up. At this point is the perfect seal still usable? From the ad and how to from this video it pretty much says you can continue but I’m a little sketched unless I hear from one of y’all I’m good lol

@patrickmorgan7173 9 месяцев назад

Why did mine not have the alignment bolts...caps ..spacers...just regular toilet bolts?...Just bought at Lowes ...

@williamduff5265 8 месяцев назад

There are no Lowes, HomeDepot or Ace Hardware within 50 miles from me that stock it. I bought the All in One at Amazon for only $6 more than the basic one.

@RightofCenter Месяц назад

I have some on hand just incase

@BenTedesco Год назад

why isn't the plastic lock nut installed over top of the gasket? the hole is too small for it to push through if you install the gasket over top of it

@charliep5139 Год назад

Agreed! That’s what I did bc there was a gap between the danco and the toilet flange and it fit nice and flush! My flange is sitting on top of the finished floor, in my case….

@regor2009 12 дней назад

@@charliep5139 So, what's the answer? Do you leave the plastic lock nut with a space or put the danco on top of the flange with no space between and the plastic lock nut on top of the danco? Instructions show it different, but that space doesn't seem right.

@squirts1 5 месяцев назад

uh huh.... and what happens when your toilet is STILL not flush with the floor after removing the black plastic. 🙄

@RightofCenter Месяц назад

It means your flange is too darn high and you have some work to do

@squirts1 Месяц назад

@@RightofCenter No, it means this product is too rigid and is designed for flanges that are too low. That isn't a problem for other toilet seals. I own and manage rental properties. I've dealt with a lot of toilets.