Perfect Toilet Caulking(actually easier than doing a bad job) 

Pushing the caulk rather than dragging - excellent tip!! Nice clean caulking make me happy 🙂 since I lean towards the OCD zone when it comes to home repairs. 🤣

Caulking used to be my actual nightmare. Always terrible at it with smudges and smears EVERYWHERE. This video turned me into a pro at it. THANK YOU!!!! Virtual beer to you brother

A great how-to video. Concise, good camera work, and an inarguably good-looking product. Major bonus points for the outtakes. Thank you!

Man, your videos are the best. You are showing every detail of a work, which actually makes the job professional. Thanks for those tips!

Thank you for all of these videos! We have been married 25 yrs and my husband is just *TIRED* of all the honey-do projects. so I've started tackling them and to my surprise I am enjoying doing these.

The “pushing” technique is a game changer!

I saw this video a few weeks ago and bought the caulking profiling kit thinking that "it might come in handy some day". Today was this day. It's a massive improvement over using your fingers! Thank you, you saved me a lot of time and frustration.

Many thanks for this video! It’s extremely informative. I just caulked my new tub and it look’s almost perfect. Spray bottle, credit card, push the caulk, don’t caulk back, all EXCELLENT ADVICE! ✌️

Excellent, professional quality video, clear straight to the point instructions. Thank you for posting.

I'm confused. Do I cut the cucumber before or after I profile the caulk? Very helpful video, though.

I would run across this the day after I did all the caulking around a newly installed shower & wall trim. Wish I’d seen this sooner. I profiled mine with painter’s tape, Windex, fingertips, and nearly a roll of paper towels. It was a real headache. The profiling kit shown here looks handy.

Thank you for taking the time to make these videos. My preference is to read instead of watching a video but sometimes a visual guide is the better way and I am thankful that I found your videos. I also really appreciate the links. Replacing one of our toilets and I was debating on caulking or buying the caulk strip. After watching this video, I will caulk and leave the back open. We are replacing the trim and flooring in the house and your videos are a blessing. Love the bloopers too! 😂

This is great! I had a general idea but without my Dad around I am just lost tackling projects. I lost him over a month ago and he was my engineer for everything. I’m not dumb by any means but loosing your Dad at a young age you realize there was so much more to learn from him.

Love your videos... Keep them coming. I need to check out the scraping tool... My finger always leaves a MESS!!

Fantastic! Caulking toilets has always been one of my most hated jobs. Now I don't have to worry too much about it anymore!

A very nice, informative video. Thank you! I do caulk toilets, too, but... I always use clear silicon. Always perfect caulking - no mistakes can be seen...

Great work as always. I love that you include the bloopers. We’re all human. Everyone makes mistakes. I need a good laugh now & then.

excellent, detailed video and great tips. I like the idea of leaving the back of the toilet un-caulked in case of leaks, also the soapy water suggestion. BTW, I ordered the tool (already use the tips) - both products great. thanks again for taking the time to share your knowledge and to make great instructional videos to help so many.

Thanks for the tip about the soapy water keeping the caulk from gooing up

I just did this job last week. I "winged it" as you said and it actually turned out fine, but I wish I'd seen your video first because I wasn't aware of that soapy water trick. I'll definitely use it next time I'm caulking something. Thx for the video!

I've never seen the soapy wooder trick before, thanks!

Thanks, this worked great! I used your guidance to caulk a pedestal sink to a tile floor. The 90-degree profiling tool gives a very clean look. I used the DAP Dynaflex 230 as well.

Thanks for this review. Have not done much viewing on caulking toilets but you gave me new way to do them. I like idea not doing the rear so you know when water is leaking. My only concern is if Roaches can squeeze out from the back. Changing toilet for a friends flip, lifting the toilet, all these roaches came running out. Was 'ready' with my spray but I hate knowing they are down there and can sneak out with the open back. Thanks again for your Tips...like them.

Pro level right there..Thank you!

I laughed seeing somebody has a video for this, but I live in South Carolina so I understand shesh... I like to add to the list on why you caulk the toilet and that's to finalize and LOCK the toilet in place so all the stress on any type of movement is not on the two bolts and helps from cracking the wax seal from heavy hitters who plop down on toilets 🤭 I

This dude is the King of caulk.

I had to use toilet shims to prevent rocking, and used a silicone caulk that matches my gray tile grout, left a gap at the back of the toilet. Looks nicer, covers the shims, and my kids sometimes splash during bath time, so for me that's the way to go.

Thank you so much for this video, my dad could actually explain this to me but instead he chose to yell at me that I'm useless, so I had to resort to you.

Not caulking and wax ring failure are directly related for 3 reasons: caulk helps keep the toilet from rocking, it keeps spilled liquids (body fluids, mop water, overflows) OUT, which could rot the subfloor, and it indicates that the toilet was not installed by an informed plumber, so maybe they also weren't so good at properly setting a wax ring.

Ok I googled how to caulk toilet and this came up. Thanks - I bought the profiling kit and am totally going to do this job myself!

Just a tip from an old glazer, when you whip the sealant GO in the opposite direction that you used when you "pushed" your sealant.

We JUST got new flooring put down and the toilets replaced. They didn't caulk the toilets and I was going to do it this weekend. Perfect timing by the algorithm Gods. LOL. Thank you for the technique and tips!

Gorgeous! Love these tips!

I love your program your videos are very informative and what a nice bead around the toilet

I use painters tape for all my caulk jobs. Then I smooth out the caulk w/ finger while wearing disposable gloves. Remove painters tape after smoothing. Perfection every time.

Brilliant...just replaced both...this clip..excellent for the nice finish👌👌

Great simple tip at 1:12! Plus the tip at 2:25 too that I hadn't seen before, in conjunction with the profiling tool. Thanks! (the unexpected outtakes at the end were cool - you had such a smooth and natural delivery in the video that I didn't think you made any mistakes, haha)

Excellent tips, wish I’d have seen this a long time ago. Thanks.

I literally just did this today after watching your video. Was a bit nervous, idk why. Now I’m looking at the other toilets like y’all are next😂

Thanks for the tips, and for the link for the saving caps...a nice one to get. Cheers from Ottawa.

"Push the caulk." Great tip! ALWAYS push the caulk when possible. Pulling the bead stretches it out and will lead to premature shrinkage and failure of the seal. Learned this many years ago in the glass business. Great job explaining this process.

Thanks for adding to the discussion!

I came across this a few months ago and saved it for later. Today was later. I would have used the finger and it would have looked just like that! Thank you!

Thanks man I been struggling I'm A chef that's in maintenance now in caulking is one of the main things that I hate doing so I need all the best tips that I can get

Thank you! Perfect first try

Very helpful! And I like the last part of the video. You're so funny 😂

Super helpful, thank you!

I've never ever pushed. Nice tip.

great knowledge, tips and info man. just found ya, and love the content already! keep it up!

This was very helpful!

Impressive. Great demo

Excellent video. Thanks man

Awesome videos my good man! I don't know how you have the time to make these when I barely have the time to do the job itself! New sub. Cheers!

Man really nice job, great video

Great video thank you someone said you can also apply the sealant with a teaspoon attached to the sealant on the end

If you don't have a profiling tool you can also use masking tape! Just mask off the area you don't want sealant and smooth it out with your finger. Works better IMO because it leaves a much cleaner edge with no residue

Helped a lot, thank you very much !

Spritzing the soapy water is a great idea. I've used masking tape whose margin I cut with a knife to form distinct lines. Smear the caulk and pull away the tape to leave a sharp line. It works OK, but I like your soapy water idea.

Excellent video. Feel much more cofident about re-doing mine now. The tile is very porous, so I hope the caulk doesn't migrate and stick as I pull it with the profiling tool.

appreciate it boss

Wow! Excellent Video!

Excellent! Thank you.

thank you for this!

I am glad to see training like that. Getting 6 tubes of the same caulk and getting used to one's preferred is necessary as the crap is frustrating! 😅 Just gluing old boards together to see how well different ones stick. I use 3 foot 2x4s on 3 foot 2x8s. Test them for grip after 48 hours in dark dry climate. Good practice and gives appreciation for adhesive properties. Everytime I can caulk at home it's midnight. I always have fun even though I can't see as well as I'd like! So far I like Lexel clear or white. It's a polymer rubber. I tried 5 to 7 other brands beforehand. This stuff stretches, goes on cold and damp. What's your favorite clear amd white brand? If the crack is big because of various reasons, I like to shove plummers puddy into the crack as a type of backer. Or the thick quality white electrical tape. Or even scrap foam. Depends on crack size.

Two great tips there! Leaving a space at the back. And pushing forward not pulling backwards. Just in time, doing a toilet next week! Hey, you, an American, said ‘toilet’!

I gave up and just assumed I was only good with nuts and bolts... anything with putty, mud, caulk I just assumed I didn't have the skill. Well... I might give caulking a try again soon!

I like using popsicle sticks to go over the caulk bead

I've always used my finger, but might try the tool. I like the straighter edge.

I give them the option of caulk around a commode and typically recommend not doing it. Caulk will often yellow and look bad from urine. Least without it they can get under the edge when cleaning. Several times been called backed to pull the commode and remove caulk.

Wow! Thanks.

I like this guy.

Thank you for this video. As a building code official, we usually require the caulk run around the back of the toilet with a 1" opening . This allows under toilet leakage to escape while minimizing the area where external fluids can enter. And best way to caulk this area is with a squeeze tube, not a caulking gun. If silicone caulk is used, should spray bottle be filled with denatured alcohol, not water?

Oh my. Ty for the lesson

EXCELLENT. ...INFORMATION..

Love it , just my DY for tomorrow!

Make 100 percent sure your baseboard is caulked at floor at 1:50 can see it is not If it's not and you have a leak you don't notice immediately... it will wick up the drywall destroying it and possibly leading to toxic mold

Thank you for this. This is so random but I love your voice 😂😂

Thanks, but a small hand held squeeze tube works better for me. my toilet isn't on a platform and it's surrounded by walls - makes it tough to get the right angle with a big caulking gun

Beautiful

Thank you for all your tips! I have a 1997 Dodge poplar 190. Tinted windows in the front. Well I definitely know I'm going to be sealing around the absolute window which is metal, and then the inside has the rubber next to the glass (not sure what I'm going to do around the rubber part) Do you have any videos on Windows on RVs?

Thanks 🙏

Thank you very much

Man, I wish I watched this vid before doing this 2 days ago 🥴😩🤣. Very nice!

I've caulked in a thousand toilets and I still watched this video.

thanks!

Thank you 🔥🔥🔥🔥👍👍👍👍

Very helpful videos! Love these tips. Although I wouldn't mind such a handsome man coming over doing the job for me so I can watch 🧔 🐻 ❤

thnx man

Excellent tips. I used color-matched silicon from the tile manufacturer. It has the same look as the tile grout I used. To me, it looks much better than white, creating a shadow line to the floor with the black (almost dark grey). White would have showed every error, as well as any waviness in the line.

Thanks

Great tips mate! Many thanks and keep them coming! Just looked for both of those products here in Spain with Amazon and nada! Even with the profiler made in Germany! 🤣 You guys over the pond always have the best time saver tools!

When smoothing the caulk against the toilet base, wipe the caulk with a clorox wipe. It works great.

Is the chalk that he is using for bathrooms. That type has something in it to help mold from forming on it. Great ideal pushing & leaving back open. Thanks.

I know what you're using here is not 100% silicone, but I switched to DAP bathroom caulking, their AMP stuff. Excellent product, I think mold and mildew resistant for life. Despite it being oil based cleanup, it is very easy to work with, gives you a MUCH longer time to trim and shape it than silicone, cleans up nice with just a paper towel and unlike silicone, you can paint it which is good around bath/shower combos; if you don't get a straight line due to an abberation in the drywall, you can simply paint the caulk to make it look straight. I tried it around a toilet and it's not as easy as what you did (probably because I didn't use any mineral spirits on my finger) but it wipes up cleanly and wasn't too bad. The trick is to put a very small bead down, then use your pinky to smooth it out, which expands the bead of caulk some. Simply wipe the excess areas away with a paper towel. No more 100% silicone for me!

Caulk master mcgee!

Any dripless caulking gun recommendations? And the caps say not available. Like your chill informative style

With the profiler or finger you still spread it into the texture grooves of vinyl flooring. Finger works fine, then follow up with a wet sponge

I have used painter tape to prevent smearing when calking. It takes a long time but gets a good result. However, I think it would not work well around a round spot like a toilet... I better learn from this vide

Very professionnal video 💪 I have no excuse now for not doing a good job after seiing such video 😳😋

Great info. But is it necessary to caulk around the toilets base.