ALL NEW!! Betaflight 4.5 EzLanding Feature 🔥🔥

Подписаться 19 тыс.

Просмотров 17 тыс.

50% 1

Airmode, Idle Up.... Nope, Give me EzLanding!!!
▶️To enable, go set mixer_type = EZLANDING in CLI.
▶️To return to normal behaviour, go set mixer_type = LEGACY in CLI.
▶️ez_landing_limit: Default: 5, Range: 0-75
▶️ez_landing_threshold: Default: 25, Range: 0-200
▶️Download & Install Betaflight 4.5 & 10.10:
✔️ • NEW!! Betaflight 4.5 &...
▶️$150 Full Drone Build:
✔️ • Build This Quality Fre...
▶️OG Infinity AIO Board Video:
✔️ • How Much Would You Spe...
▶️How To Fettec Alpha:
✔️ • How To Flash, Set Up, ...
▶️How To Fettec:
✔️ • Finally!! How To Wire,...
▶️How To ExpressLRS:
✔️ • Finally! Quick Set Up ...
▶️Pavo Pico:
✔️usa.banggood.com/custlink/m3v...
or
✔️www.myfpvstore.com/whoop-dron...
▶️NewBeeDrone Products:
✔️newbeedrone.com?aff=58
▶️▶️Ultimate Motor $17.50:
✔️✔️www.myfpvstore.com/ip27
▶️▶️DemiBot Build:
✔️✔️ • ALL Aluminum!! 😱 FPV F...
▶️▶️SpeedyBee Stack Video:
✔️✔️ • What If One Stack Coul...
▶️How To Bind ELRS Micro Drones:
✔️ • How To Bind Any & ALL ...
▶️The One & Only Moxy Build:
✔️ • Let's Build The All Ne...
▶️Let's Build A Master Drone:
✔️ • Let's Build a Master D...
▶️My Review of The Speedybee V3 Stack:
✔️ • All New SpeedyBee V3 S...
▶️Aikon F7 AIO 60 AMP:
✔️usa.banggood.com/custlink/KmD...
▶️Let's Build It Playlist by DrainMan:
✔️ • Let's Build It !!
▶️Everything To Know About LED's:
✔️ • Betaflight LED's !! Ev...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
▶️If you don't want to build one, Buy One!
✔️amzn.to/37s0SdE
✔️usa.banggood.com/custlink/DmG...
▶️Whole Trouble Shooting Series:
✔️ • FPV Electronics Troubl...
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
✔️usa.banggood.com/custlink/33K...
====▶️Camera For My Scope:
✔️amzn.to/3SA2ANg
====▶️LED For My Scope:
✔️amzn.to/3ZiVsXC
====▶️Lens For My Scope:
✔️amzn.to/3kxPQKs
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️Cheap One
✔️usa.banggood.com/custlink/mDG...
▶️Micro Pencil Soldering Tip
✔️amzn.to/3Fq1dKm
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
and
✔️amzn.to/2Oj7r8C
▶️My Favorite Multimeter:
✔️amzn.to/3Y3QlJT
▶️Cheap One
✔️usa.banggood.com/custlink/DK3...
▶️Must Have Solder Mat:
✔️amzn.to/2FXQKuU
▶️No Cotton Foam Cleaning Swabs:
✔️amzn.to/3joxWUi
===▶️ / drainmanfpv
▶️MyFPV Slidez:
✔️www.myfpvstore.com/i09w
▶️Blue Loctite:
✔️amzn.to/3fB0lqL
▶️When A Motor Rips Off:
✔️ • What Would You Do If T...
▶️How To Set Up LED's
✔️ • Betaflight LED's !! Ev...
▶️ES121 Electric Driver:
✔️ • ES121 Electric Screw D...
▶️If You Want The Beast by iFlight:
✔️amzn.to/354KxqW
✔️www.myfpvstore.com/unm5
▶️iFlight Beast Review!
✔️ • Why Wouldn't You Use T...
▶️iFlight Beast Build & Flight Video!
✔️ • Let's Build The H7 Bea...
▶️Crossfire Nano SE:
✔️www.myfpvstore.com/koh7
▶️Unify Pro 32 HV:
✔️www.myfpvstore.com/2h0e
▶️Caddx Air Unit for DJI
✔️www.myfpvstore.com/36cn
▶️Custom DrainMan Motors!
✔️www.myfpvstore.com/iydp
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore.com/8bf3
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
/ drainmanfpv
/ drainmanfpv
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2-Day Shipping)
✔️amzn.to/2PjqUDi
or
✔️www.myfpvstore.com/7ts8
▶️How To Taranis:
✔️ • How To Frsky Taranis
====▶️Contact Me: @DrainManFPV on FB or DrainManFPV@gmail.com
====▶️I'Gizzle: / drainmanfpv
====▶️ / drainmanfpv
#betaflight #fpv #drone

Опубликовано:

28 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@alexj3709 4 месяца назад

Your explanations and demonstrations I find to be very easy to follow and the best direct, no nonsense how-to advice. Thank you for all the work put into this channel. 🙏

@mmmmmmmfancy 4 месяца назад

Man I literally get so excited when Drainman goes “Heyyyyyyyyyyyy pilotssssss” you jus know the vid gon be good when drainman is at the helm

@baggszilla 4 месяца назад

Great demonstration DMan! Thanks bro!

@moriwaky 4 месяца назад

man your energy on the videos are fantastic. keep going like that!

@TreblebullFPV 2 месяца назад

Really is though, love that intro every time ahaha. Helping a newbie out in me, due to binging his vids cause of his personality.

@manski209 4 месяца назад

Awesome lesson, thanks for sharing DM. Great video.

@paulmillard1130 23 дня назад

I don't know if all these crutches are a good thing . I learned with them all turned off and concentrated on a good tune. It wasn't easy but it took less time for me. BF flies real nice on just the PIDS I don't get motor dropouts. You put a lot of work into this channel thank you.

@ScottDobbs07 2 месяца назад

I am a very new pilot and I can already tell this is a great feature. Awesome!

@andyhoughtaling6319 4 месяца назад

Noticed you've got a FlyFishRC frame, there. Excellent choice! I ran the Volador VX6, and it was the best frame I've used to date.

@ViralFailsCN 4 месяца назад

Agreed 👍

@manski209 4 месяца назад

I have 2 Volador builds and i love them. Great frames.

@carbonEYE007 4 месяца назад

What is so much better than other frames guys?

@andyhoughtaling6319 4 месяца назад

@@carbonEYE007 Arms widened at the common breaking point, chamfered edges, hexagonal pockets for standoffs, countersunk bolts in the top-plate, designated channel below electronics for XT60 wires, frame mounted XT60 connector, TPU vibration dampening caps between the frame and standoffs, aluminum camera cage, adjustable GPS bracket, every TPU add-on you could ask for, T700 carbon fiber, ridiculously tight arm-locking design, amazingly organized packaging, and extra of every single piece of hardware. It pretty much has everything you could possibly ask for out of a freestyle frame, and it's only $70. Do it, dude. Treat yourself to this amazing piece of craftmanship.

@lynsmith1096 4 месяца назад

Very good video and tutorial.

@rcaddict9558 4 месяца назад

Very nicely explained! ❤

@TurtleModeFPV 3 месяца назад

I wasn't watching the screen... but I could totally visualize a "Zooosh Roll" 🤣

@luigivincenzi9155 3 месяца назад

I download it 10.10 and it came with no fail safe tab what happened?

@Happyflyhigh 4 месяца назад

Love your videos bro.

@k4x4map46 4 месяца назад

interesting...great info on the bounce!!

@altermannfliegt3927 4 месяца назад

I tried it in December. It's definitely a relief. 👍

@birdman316 4 месяца назад

kool vid my brotha!

@Michael-db6li 4 месяца назад

Best chap in my opinion to watch and learn from 👍

@_bs5349 3 месяца назад

Thanks broth good job for all of us 🎉🤝

@BrandonBeans 4 месяца назад

Im loving Betaflight 4.5

@jonathanrau4676 3 месяца назад

Im loving it !

@DOHCtorMiguel 4 месяца назад

Great video! I was almost on board til you showed the cons of EZ landing, which I greatly appreciate. I've used air mode on a switch for so long it's probably easier for me to stay like that then to learn to fly differently. Keep up the grat videos.

@DjHeely 3 месяца назад

With higher ez_landing_limit all the cons disappear, dives work perfectly and landings aren't bouncy. For me a value of 15 worked great

@Lift33d 4 месяца назад

So cool ! Im wondering how this will help with 3D flying or if theres any issues

@Progress_FPV 4 месяца назад

Im still a beginner and fly mostly tiny whoops and have learned that air mode being off is good for indoors. I will have to try this with my Crux3, my first non whoop drone.

@chinmarifpv3319 3 месяца назад

Great information, can you tell me where i can get and install that gimbal mod for the DJI controller, it looks nice, does it improve stick feel?

@bluefpv3263 4 месяца назад

why didnt they make it that the sticks need to be centered, throttle at 0 AND quad needs do be leveled or near level atleast?

@vilicia164 4 месяца назад

Hey, u r great. Love you videos. Find them all very helpful. Thanks D'man. I've been enjoying BF 4.5 for a while but I can not say I feel much of a difference in flight characteristics and I prefer the switch option for airmode over this easy-landing feature. Have yet to try the improved GPS rescue feature though. I've been flying on BF for about three years. I once tried KISS and I did like it but that was during the time when I was quite new to the game and so was not in a position to distinguish the difference in both FC firmwares in terms of flight characteristics. Now that I've been flying for a while and reached a point where I'm just curious to know the difference. I wish for an honest opinion from you based on your experience about the flight feel, KISS vs BF. I think both can be tuned to feel the way I want but your thoughts please! - on KISS (for a freestyle pilot who fly both FPV and LOS equally well). I love all things RC including 3D helicopters and airplanes of all sorts. I'm just so hooked to this game. So please! I'll appreciate your help by giving your honest opinion before I invest on a KISS setup.

@user-bt2lx4gy7h 4 месяца назад

if Hard Rock Nick and Bardwell had a baby... It'd be you. Hard Rock Bardwell

@babyzeefpv9887 4 месяца назад

Nice Upload!

@kaptkronik135 3 месяца назад

jolie olie of drones :)

@user-ob1fo5wd7m 3 месяца назад

I see you did the AG 01 gimbals on your transmitter. Is it worth the effort? Did you follow spire fpv and let’s fly RC ? Thanks, have learned a lot from your channel

@MastakAK 3 месяца назад

Friend! Turn off the Anti-Gravity mode and your copter will stop bouncing off the floor! My copter flies at low speed 10 centimeters above the floor right in my apartment.

@LifeofAccro 4 месяца назад

if you have any info on getting the GPS/GPX file to work in BBE id love that! Havent figured that out yet but was and why i wont show in BBE, but everything us up to date on all fronts. thanks

@seekerfpv 3 месяца назад

I will watch Drainman's video because he explains more in detail things that others just barely touch.

@FlyturboKwad 4 месяца назад

What RC transmitter is that? Modded DJI remote?

@VladVortal 3 месяца назад

Super

@mikespeedyfpv321 4 месяца назад

❤

@DaveNorthWest 4 месяца назад

Is there a land mode like GPS rescue except just you can hit the switch and quad will try to park in space then go into slow decend and land?

@TriMeX1987 4 месяца назад

Thnx for showing all these extra features. Is it not easier to have it controlled on a switch. That way you dont have sudden surprises like when you do a dive next to a building?

@bluefpv3263 4 месяца назад

a third condition for ez landing would fix that "quad needs to be leveled" (or near level) would be a fix for the diving problem

@Benthedroneguy 18 дней назад

They should add angle limit to ezlanding. No one perches in a dive or does slides with 60deg up tilt

@smooth_ops2942 Месяц назад

So my setups are firmware 4.0.2 i think from about 4 years ago. There tuned really well but just getting back into flying after a 2 year hiatus. You seem to know your shit and fly like it to, so just wondering if there are any new changes that are worth me changing over to a newer version? Been flying since 2016 so tuning isnt a problem.

@TriMeX1987 4 месяца назад

Where is the shirt from? ❤

@johnycane 4 месяца назад

I felt guilty about buying apple vision pro until I saw the amount of drones on this guys wall.

@HatersGonnaHateFPV 2 месяца назад

Ohhh shoot lol my fav part

@Binkoro 4 месяца назад

Can you make a video on how to configure a quad from scratch (instead of relying on CLI dump) when upgrading to BF 4.5?

@franciscolezcano7441 4 месяца назад

you use throttle expo?

@Zoggbarr 3 месяца назад

tl:dr raising ez_landing_limit a bit should prevent the instability during a drop/dive. Raising throttle slightly during a drop/dive also provides more stability without significantly raising the effective throttle compared to the legacy mixer_type. I did most of the implementation of EzLanding, nice to see that people like it. What I suspect happens when the quad goes unstable during the dive is that the air starts pushing harder on the quad than the quad is currently allowed allowed to push back with the motors. It's not really EzLanding suddenly changing anything. The amount of force that the the quad is allowed to use doesn't change from the point that the fingers are of the sticks (or at least it shouldn't). Raising ez_landing_limit a bit would allow the quad to use more force at zero throttle and should allow the quad to remain stable. The current default ez_landing_limit of 5 is quite conservative. As a comparison, having airmode off with the legacy mixer on should be roughly equivalent in bounciness to having an ez_landing_limit around 20-25. And I might as well repost this description of how EzLanding works: EzLanding essentially limits how much airmode is allowed to increase the throttle to the highest of: 1. A value based on how close the most deflected stick is to the maximum deflection. If ez_landing_limit is at 25 then 25% stick deflection will let airmode increase the throttle to 50% (which is about as much at it will ever need) 2. The minimum value set with ez_landing_limit (default 5%) 3. The current throttle from the pilot So in a way EzLanding will be active all the way to about 50% throttle if the sticks are centered. Also, it's not just good for landings. it's also useful for unsticking whoops from walls and should make flyaways on arm much less common.

@DjHeely 3 месяца назад

I tried what this guy said and had great results! With higher ez_landing_limit all the cons disappear, dives work perfectly and landings aren't bouncy. For me a value of 15 worked great!

@lopesdev 3 месяца назад

So how do i change to that value? What is the command? Thanks mate

@DjHeely 3 месяца назад

In the CLI: set ez_landing_limit = 15 save

@lopesdev 3 месяца назад

@@DjHeely thanks a lot mate will try that

@TheDarkstar826 4 месяца назад

It's cool, but I will find it annoying for long dive. I think they should use the barometer to detect the distance from the ground and activate the easy landing feature. If you like flying low. Have a threshold as well.

@kanadakb8690 3 месяца назад

they should add angle parameter because if you want to free fall you going to be looking down but when you try to land you are going to be +- on horizon

@wwdawdwadawdaawdwa9337 3 месяца назад

hellow, i have Pavo Pico Brushless Whoop Quadcopter HD version can i connect analog VTX?? if yes , how? thank you

@RuthlessFpv 4 месяца назад

cool but just so funny .... kiss been doing this centuries ago XD

@carlskinner8446 3 месяца назад

Where do I get the upgrade at?

@divingfalconfpv4602 3 месяца назад

I need try 4.5. I went to try but gps dodnt work. So went down to 4.4.3. When GPS still dodnt work. I realized it was something else. Then found damaged wire. Fixed it. Got go back to 4.5 rc2

@powersv2 4 месяца назад

Im going to trigger an ezland in an inverted yaw spin float

@archangeltheblacksuperman5236 29 дней назад

Do I leave airmode on after I set ezlanding on?

@MrStevegibb 4 месяца назад

Terrible idea a large amount of fpv freestyle is spent at centered sticks and then if you decide to drop throttle to loose altitude suddenly you loose stabilisation on your drone. Much smarter to have 3 position switch with airmode off, airmode on and then final position gps rescue or turtle mode.

@Mmd8bn День назад

Hard Rock Nick?

@YonnBurgos 17 дней назад

Hi! I upgraded to 4.5 but when I tried to setup EzLanding, I got an error message stating is an invalid value. When I type letter by letter after the = I don't see EzLanding. Does anyone know what to do about it and fix this?

@peeweeherman5590 4 месяца назад

I bet the CIA asked for this feature years ago. We are always the last to know.😂

@carbonEYE007 4 месяца назад

They would have to spoof your radio link including the bind to do anything like that. They can drop them with the laser gun looking rig they have but it’s not a great system

@mikenomatter 3 месяца назад

this is a wrong definition of airmode. pid_at_min_throttle is responsible for zero throttle control. airmode is responsible for mixer saturation and additionally activates pid_at_min_throttle and I-term at zero throttle. Even in your video you still have control over the quad with zero throttle 5:18 Put airmode on and I to zero - it would be same. And then put airmode off and pid_at_min_throttle = off - then you'll know what absent of controll on zero throttle is)

@tanoryjakaperdana1419 4 месяца назад

me Airmode On and when landing disarm the kwad 😂

@wyomingFPV 3 месяца назад

i want that shit where did you get it?

@HeliNoobRc 4 месяца назад

You’re only about 3 weeks late on the video lol.

@robertgiordano3452 4 месяца назад

Bro dont be hating on the Drainman even if he isn't the first to post about something he does it better and his enthusiasm for the building process and the hobby is without equal

@HeliNoobRc 4 месяца назад

@@robertgiordano3452 Not sure how that’s hate . I’ve been waiting on someone to post how this works . For about 3 weeks …

@remyKhuong Месяц назад

Im sorry but to much info to gather. Conclusion was like Turn on air mode, then go to cli tpy the code… then its worked like magic? Did i miss something Guys???