Allis-Chalmers WD & WD45 fluid maintenance checks How to 

It’s coming very soon , we are just finishing up new lower belts and bearings and it will be ready to go

Can’t say that I’ve run into that as of yet

The park brake cam usually seizes , if you have an oxy/acetelyne torch they are easy to free up

Yes you can

No , theres a cap in front of the distributor/ behind governor housing and if someone has swapped a combine governor then you can remove the hood and go through the valve cover

Yes , and there is instructions on the stick for measuring level

Is there a difference between the hydrolic and trans fluid. My alis leaks from the pto and was wondering if i should fix that right away

@@littleturtleg1767 yes , hydraulic is separate from trans/rear end and the final drives have their own as well

I use universal hi-trans fluid that meets agco spec

For level or drain ? I was only showing levels , but this tractor was a poor example as the hydraulic lines are in the way , trans and diff share the same fluid , but there is 2 plugs and upper and lower , when I do my full service I’ll make another video , thanks for watching

@@ontariovintagetractor both level and drain ,are they square but type for level I see several on my wd and how do you ingage the pto in back for a bush hog

@@ontariovintagetractor so for the level of the fluid, do it requires just to be topped off? I agree these things are hard to get to 🙃

@@brianraabe308 yes , fluid level should be just below the fill plugs, thanks for watching