Alpine i509-WRA-JK 9" Installation | '11 - '18 JK Jeep Wrangler

Подписаться 2,9 тыс.

Просмотров 10 тыс.

50% 1

We are extremely excited to announce our partnership with Alpine to bring some of the best audio technology to the Jeep community. In this video we will be installing the Alpine i509-WRA-JK 9" head unit kit.
We will be offering this kit with two options:
Option 1: T7 Plug & Play - this option includes completely assembled head unit with all cables, connectors, etc. pre-attached. We will also pre-flash and attached the Maestro module, and we will provide a pre-cut and prepared dash piece ready to install into your Jeep!
Option 2: Alpine DIY - in this option the head unit will arrive in the OEM box and will require assembly, the Maestro will need to be flashed, and the end user will need to provide and cut their current factory dashboard.
The i509-WRA-JK fits your 2011 - 2018 JK Jeep Wrangler
Interested in learning more or grabbing a bundle? Check it out here: trailseven.com...
All of our current Alpine offerings will be displayed via this link: trailseven.com...
Trail Seven | www.trailseven.com | 301.450.3207
Please comment below with any questions or feedback and we will respond promptly! If you like our content, please follow along by tapping that subscribe button.
Trail Seven | Frederick, MD | www.trailseven.com

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@jodiblair3048 6 месяцев назад

Thanks for the vid! I am savin up for the Alpine. I have always loved Alpine. I absolutely love the look of the whole setup. I did go to y'all's website and I will be callin. I noticed for the '15-'18 y'all don't have the cut dash which is jus fine. I do have the Select Increments JKU Speaker Pods as well for back roll bars. I am looking at the bundle but will need more. Again, thanks for the vid and I'll be callin.

@trailseven 6 месяцев назад

Awesome, we’re here to help answer any questions that you have!

@judybookout31 11 месяцев назад

I noticed on the passenger side, there is a gap on the dash where the light from the radio shines thru as the new dash piece must not fit correctly. Is this a defect in the dash overlay?

@trailseven 11 месяцев назад

No, that’s by design. It’s not a gap but an intentional light that emits through the sides.

@user-ge4go2qu8y 28 дней назад

What is you don’t have a Uconnect ?

@trailseven 28 дней назад

@@user-ge4go2qu8y In that case you will route both cables behind the glove box instead of just the 1.

@imikeyb2 9 месяцев назад

question, every install I’ve seen has the nav/GPS box going, above/behind drivers head to the crossbar the speakers are on. I liked where you put it instead up front on the dash so I installed mine there. System info Navigation antenna = connected Vehicle positioning information = no data, no satellites, VP = not done Basically the clock won’t function and no gps activity connecting. Everything else works perfect. My GPS via CarPlay is fine too. It’s not a huge deal but it’s bothering my OCD Any ideas? Thinking I’m going to have to move it further away from the head unit :/

@trailseven 9 месяцев назад

Yes, you’ll want to move it away from the head unit.

@Maximusprimeatyahoo 7 месяцев назад

Why can't I use the GPS that the factory unit came with or the microphone that already installed from the factory??

@kevenorr6592 10 месяцев назад

I bought a used 2018 rubicon and it has the 209 in it. My question is do you know what would make the OBD2 stop working/connecting? The person had the OBD2 cord unplugged, so I plugged it back in and had 0 luck getting it to re connect. Basically the gauges won’t carry over to screen. Any tips gents?

@trailseven 10 месяцев назад

Sorry but not without dissecting the entire harness and set up.