Amazing Manufacturing Process of Bank Strongroom Door || How Bank Vault Doors Are Made 

А ни кого не смущает что механизм отпирания под передним тонким листом, а задняя стенка бронирована, или я чего то не понимаю?

имея ключик на 13 дверь будет вскрыта ))). а так молодцы, трудолюбивые .

The only reason there are not many bank robbers in India trying to open those kind of doors is because their tools are also made India.

Concrete reinforcement, from the inside of the bank vault. Hinges on the outside. The entire weight of the door rests on the top hinge. Outer door plate covering the mechanism, fastened with a few screws.

I think the blue Bondo is the strongest part of those tack welds!

28:30 Click on one, nothing on two, slight core turn on three.... Not that it really matters since all you have to do is remove those bolts on the outside and the whole lock and locking bar assembly is right there underneath it. They built the thing backwards. The lock and locking bars are suppose to be behind the concrete and the bolted on plate is suppose to be on the inside of the vault.

This video would make more sense if it were titled "Amazing Manufacturing Process of Panic Room Door". It only makes sense if the intruders are approaching from the direction of the rebar/concrete - not from the lock side. Surely no bank would purchase this for a vault. A socket wrench gives access to the locks.

am I missing something or why are the screws on the outside of the door?

Crazy stuff. Should be titled "How Bank Vault Door Facsimiles Are Made" Reminds me of the natives on an island making facsimiles of airplanes out of bamboo.

Пакистанцы режут швеллер маленькой болгаркой, а шлифуют большой.Вот что значит другая вера.

It's me oh, but if the last steel plate is removed, which is only held with those small screws, there is access to the mechanism, I don't understand...

Получается, весь механизм с замками спрятан под накладкой которая прикручена винтами. И эти винты находятся снаружи. Гениально

To open it, just unscrew the screws

The door is made back to front. It can be unbolted to access the lock mechanism! I spotted the clever use of copper sheet inside the door to slow down attack using a gas torch but everything is back to front lol.

Я думал болты через один закрутили и срывных хотя бы закрутят, а нет - докрутили обычными... гениально! Такие двери только под видос на ютуб собирать)

Didn't they.. didn't they just put the massive, multiple layered and cemented side inside and exposed the one sheetmetal layered side to the outside (key side). So unless someone wants to lock himself inside the door, to open it you just need do unscrew the hexbolts and dismantle the locking mechanism behind? No grinder needed, just an wrench and 17 nut.

I don't think that the shareholders or customers of any bank would be reassured by a strongroom door like this.

The definition of polishing a turd couldn't be more real🤙

Strong on the inside, weak on the outside... How is this amazing?

These dudes must get so much arc flash. Looking at the weld is no joke. It sun burns your eyes. And how funny is it to even bother wearing a dust mask while painting.

It's a good thing that the ships that get scrapped have the right steel.

Это просто - прекрасно!!! Самое лучшее изделие которое я видел, сколько труда и сил вложено только в то, что бы сделать для других , удобство - доступа!!!

Lube !!! the rust is the lube. Looks like a benkrobers dream lol.

Мужикииии!!! Глазок забыли поставить!!!😁👍

You would think with all of their fabricating skills they would have built some tables to work on instead of being on the floor.

I guess I am not the only one who noticed that this is not safe door. This is just a super heavy door.other then that, nice fabrication video.

какое-то супер засекреченное предприятие!))))) Сейв из швеллера - нанотехнологии...двутавра - это вообще космос!! Пока делали...сколько интересно людей там погибло на производстве?)))

I know there's quality crafts men when I see safety pyjamas

This door is more security theatre than real security. Five minutes with a spanner would take off the outer skin on the door, revealing the weaknesses within that can be quickly bypassed with an angle grinder.

I think that those doors are made with all possible security mistakes which allows to open it using brute force in many ways. It is kind to let you bring tools you currently owe to open the bank deposit ☺️

this hands down has to be the cleanst most organized factory i have seen from that part of the world which if im not mistaken either India or Pakistan

Люди на видео настолько не понимают, что они делают, что я не мог удержаться и досмотреть до конца. Они видимо, до этого делали входные двери, поэтому вся защита и доступ к замкам - со стороны замков. Если грабителю жаль сил на взлом обычным ломом, можно потратить 15 минут времени, чтобы открутить болты по периметру и получить доступ к замкам.

Should not the bolted sheet of metal be on the inside of the door and completely sealed on the outside?

I believe I recognize this as the same shop that made a small strong box in another video. It was also lacking in security but would maybe be okay for home use or small mom and pop type store. But as others have said, it is difficult to picture this being used as the door to the safe in a bank. It is severely lacking in many security features that are common in modern banks. But beyond that, more pride in craftsmanship would be nice. Full welds instead of just tack welds. Add some grease or other lubricant to the moving parts. Actually bother removing the rust from the metal and painting or coating the parts you can't see to prevent premature rust. When your "fit and finish" is achieved via bondo / filler material and spray paint that is a big clue. I like seeing most of these videos but as a bank door this thing is pretty cringe.

Goldfinger's nightmare! Amazing Job!

Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent . I look forward to watching more of your content in the future 👍👍👍

It's obviously designed that way so that if there is ever an issue with the locks or the locking mechanism, they are easily accessed to repair/replace. They thought of everything :)

Very laborious job, finishing is also good! But why the cement reinforcement in the inside and the bolted plate on the outside? Anyone can open the bolts, remove the big plate and dis engage the locks from outside if he can get some times! In that case the inside reinforcement will be useless!

Gotta love a good safety toe slipper!

Our Punjabi Brothers of West Punjab are very hard working and Skillful !!!!

Gotta love the worker safety.......

i'm confused. why the lock side has all the easy accessable bolts and the inner side is smooth? so it's just a better fire door

quelle travail... formidable !!!

The video should be called, "How to build a super security door backwards" hahaha

The first piece of equipment or kit that I would get before working there is steel toe boots.

You did a nice job. I believe if you use 3 layers of fuel tanker sheets, you'll achieve tougher doors.

Genios muy 👏 valorado el esfuerzo

With the current state of the US (2022), I need videos like this to make me appreciate what we do have here. Thanks for that!!

Looks pretty easy to open it, got too many weak spots.

Thank you for sharing this video. I thoroughly appreciated the skills that went into constructing the bank vault door. Please consider using larger high strength stainless steel screw bolts to secure the panels into the frame. The screw bolts used are small and made from low strength alloy. They do not have strength to last the time as the heavy door frames will be opened and closed every day several times in the bank. If you don't believe me then test the bolt for strength compared to larger stainless units. Hope it helps you. Thank you.

Great job ! Masters. HQ. Jewelry work!

Bondo and paint make me the welder I ain't.

I think this door is for a second access to a building. The concrete side is outside, and it's designed to be opened only from inside.

That appears to be an ordinary MILD STEEL that they are using, soft and easily cut using hand tools. I think I could be in there rather quickly and without a lot of sweat being spilt.

Just the right door to my man cave. Burglary protected from the inside 😅

я правильно понимаю? имея ушм и болтоверт эта дверь спокойно открывается минут за 5?

Great metal working skills, but horrendous work safety.

a magnificent job! very skilled people and thanks for showing us. cheers NZ

Love how they paint in the open air in the same room someone else is welding and hammering..

BRILLIANT JOB MY FRIEND.

Для чего такая дверь, чтобы деньги из хранилища не сбежали что ли? Она же снаружи открывается обычным гаечным ключом.

27:59 ….They can’t possibly be happy with that as a finished product.

Just imagine a bank robber watching this and laughing his a** off!😂 He would say: I just need a wrench!😂

I think part of any apprenticeship program in the trades (pipefitter, Ironworker, boilermaker, etc.) should include working with these guys for a couple three months. Maybe the rookie wouldn't learn much, but I guarantee he won't be wasting rod when he gets back.

You guys need to build a nice fabrication table so you don’t have to work on the floor all day.

Классно 👍👍👍

at least some of these guys give a half hearted attempt to hold up a junky little spot welding eye shield while welding lol

I don't know if I am missing something But with the 30 odd bolts around the outside (not the inside) of the door, Wouldn't it be easy to unscrew the bolts to get access to the doors inner workings. It seems with all the rebar and the concrete on the inside of the door you are trying to stop people breaking out of the vault and not in to the vault? i know the concrete helps with the fire resistance as well. But apart from this it is a fantastic job and a very strong and sound door!

My dad used to work for a bank equipment company and I've had the opportunity to see many a bank vault door setups exposed but I've never seen one where the hardening is on the inside of the lock mechanism, a cutting torch would have this open in five minutes and my dad or the LockPickingLawyer could open the locks in less than a minute.

Simple mechanism. Big door , no security system

Great Work !!

seriously the bank which has this door is on at serious high security Risk 😂

Jefe, lo siento he perdido la llave de la puerta nueva... No pasa nada, suelta los tornillos y ya la podrás abrir. En serio la construyeron del revés, con razón la llave queda tan fuera... Por favor, que nos digan en que bancos u oficinas han instalado esas puertas de "seguridad" para hacerles una visita rápida cuando estén cerrados...

I'm a safe & vault technician and a locksmith, This has traumatised me. I need someone to talk to. NOTHING that I've seen before in my entire career has offended me so much as watching this video. Think of Danny Torrance (The Shining), in the hallway way with the twins. That's my face. ALL THE WAY THROUGH!. It was horrifying.

Good work .. Stay safe

I need a door like this for my bad ass cat.

Сначала не чë не поняла а когда электрод загнутый увидела, ну тут стало сразу всё понятно!

I build custom hidden doors with 5/16 steel plate, with a copper sheet, hard polyethylene rubber and 1/4" bitumen layer sandwich backer. The door and frame are filled with high density 8000 psi bridge mix concrete. The locking bars are 1-1/4" steel rod, that are heat treated and hard chrome plated after cutting, machining and tapping. None of the above be done after hard chroming. They aren't built like an old Diebold bank vault, but the locking mechanism uses a combination dial, star wheel crank and a glass relocking mechanism, as well as dual safety deposit box keys for added security. The keys AND the combination has to be used to open AND lock the door. It can be opened from the inside, for use as a safe room door, too. Unlike the doors in this video, which I guarantee I could open in less than FIVE minutes.....TEN minutes, if I took my time. Considering where these are being made, they are for hiding yourself, not anymore great value. The welds themselves are pathetic, not to mention the thickness of the metal renders the concrete and poorly welded "rebar" cage inside the concrete. The banging on the concrete and the heat from stick welding probably rendered the already dry mix mortar into power. What a joke. I doubt anyone who buys this is hiding any pallets of money from the Taliban. The bolts on the front... laughable. Even Grade 8 bolt heads could be sheared off with a cold chisel and 2lb sledge. As for my doors, not one has ever been compromised and are hidden in such a way, they are undetectable from the outside... meaning being in the room, they can't be recognized.

That first worker is a boss with that angle grinder and cut-off wheel. Are we sure he's not a robot?

Wow only one worker in slippers this is great progress.

Awesome work! I am a welder and fabricator in the US, love to have these guys come and work with me!

Well done, I really enjoyed your build. I’m sure your client will be very happy.

Excellent work thanks

Watching this after from curtis CEE.. Is miles away.

I think people are criticising and saying it’s backwards without considering what it’s final installation might be. It’s obvious the plane side of the door is the armoured side with a sheet of mild steel, a sheet of copper to stop attack from a gas axe and then reinforced concrete and finally another sheet of mild steel. That also puts the pins towards the back of the frame making it harder to reach them to cut or pull the door out of the frame. My suggestion is it could be a door allowing the strong room to be accessed from outside the bank or whatever the institution is. This maybe more convenient when bulk money is being added or removed via armoured car ect. In that case the way this door has been built would be suitable because from the outside you see nothing but a blank door and from inside you have the security of needing the people with the keys to open it. This would also prevent the hinges from attack. While certainly not a high security door by western standards it’s probably up to the job in its intended location. Just something to think about.

Интересный канал, пророческий, возможное будущее Европы!

nice work and good job 👍🏻👍🏻👏🏻👏🏻👏🏻

was this a joke listing? I am amazed at the other videos of yours, but I would have not one shred of confidence or credibility with that quality of build and locking system. Would like to see more videos, too.

Непонятно - все винты торчат снаружи, откручивай и снимай плиту и открывай. И почему закручены винты через раз? Вообще выглядит мощно и в тоже время на раз вскрываемо ))))

Есть и второй способ открыть эту дверь без ключей и откручивания болтов, просто срезать 8 заслонок большой ушм, ведь заслонки не защищены даже уголком, просто если посмотреть в щешь между дверью и рамой их будет видно)))

Wait… cant you just unbolt the front panel?

I would have thought that you should wait til the concrete cures before finishing.

The whole things just tacked together 😂

Hahaha they're actually proud of their work at the end 😂😂😂

good job.i love it👌👌

Nice finishing touch to hammer the only shiny part look like a used railroad nail.

Good workmanship,thanks

So, a half inch spanner is all you really need to get into this. Undo the bolts on the from plate and you have direct access to the whole locking mechanism

Болгарка без защитного кожуха!

Well considering money is basically digital...and the workshop this door was made then yes, Amazing indeed. 😁