Incredible Process Of Making Lathe Machine 

Why invest in technology when you have a endless supply of cheap labor, and no safety or environmental laws to comply with.

Steps 1 & 2 of making a lathe are shown, what about steps 3 thru 250 ?

This is just the kind of industrial processes that started the Industrial revolution in the 18th/19th century..

That huge shaper was probably created before most of all viewers were born and will probably continue refining lathes way after we perish.

And at the end of the video: an ad for Harbor Freight. Genius!

Bagus, kalau dari segi ekonomi mungkin kurang menguntungkan, membuat mesin bubut ini, karna harus bersaing dengan produk sejenia buatan china yang murah, tapi untuk edukasi sangat bagus terutama generasi muda sebagai penerus, salut untuk orang pakistan Assalamualaikum

These videos never fail to amaze the hell out of me!

I work at a an iron foundry. I can tell you that the process is not the same. Yes they do use scrap metal which is fine but missing a lot in the process. They are missing carbon and other materials including magnesium. Magnesium once added to the iron give iron it's properties but for only 7 minutes. And are missing silica in with the sand.

48:26 "How often do you calibrate your calipers?" "...yes."

Pouring iron in open toed sandals, and no eye protection.

The amount of physical mobility and low deep postures enable these guys to work like this, even doing all that low hanging digging and twisting is seemingly not a problem due to that deep low bip mobility. Most westerners the same age would be gassed out and be resting their lower backs. Tripping over in steel toe caps boots hi viz and yelllow helmets and goggles. The clothing looks so comfy

they took a sample to the lab.. mostly iron but also dirt, rocks, sandal, part of ones shirt, human bones and skin, plastic and aluminum can

Estas personas tienen una habilidad increíble, hacen maravillas con los pocos recursos que tienen, lo que vale sobre todo es su conocimiento y la destreza, nada es imposible para ellos, mis respetos 👏👏👏

Эти сандалии и расплавленный чугун...У них есть запасные ноги?

Where is part 2 , machine tool manufacturing is really interesting compared to others we've seen

Amazing video. What could make it even better would be some detailed explanations, such as the heat source for the casting. Or the types of mortar, sand etc for making the form. Either way, this gets a like!

It is extraordinary that Pakistan is very independent in making their industrial equipment

I worked in a place similar to that in early 70s, near chitigong we made fairly crude items,but the place looked the same

Love the steel cap safety thongs

This is very impressive! Honestly wish we could set these men up with a better facility! They are hard working and very dedicated! Insane work! God bless and stay safe

watching videos like this I feel so lucky to live in a country where I can say, Hell no I am not doing that.

dudes got those new Carhart safety sandals!!!!

a lot of hard work that far too many people take for granted.

Well im glad to see they are wearing flip flops , cause bearfoot would be way too dangerous 😂😂😂

Стараются, походу станочек прецизионный будет

Happy to see they wear their safety sandals! Still impressive work! Thanks for sharing! 👍🏻

Is there a part 2 coming? That's not finished yet, more hours of work 😺😺

السلام عليكم تحية خالصة للصناع الماهرين افتخربكم وبصناعتكم اعزكم الله وبارك لكم في اعمالكم مع تحياتي مصطفى من المملكة المغربية.

I motorcycled across India last year and saw many things like this, good people working incredibly hard. It was a life changing experience, and I have never complained about anything since

Mother of All Machines made by Father of All Technicians 😮

I think these folks are making the lathes we buy from oversees. Ive read that most brands are similar if not the same. It looks crude but this is relly creative. I would think the greenies would applaud this because its not a big factory and so on and so on with their crazy babble. Good video

For what they have, it is trully impressive.

This is what you call "Git er done!" Hardworking folks!

We are currently looking for an affordable new lathe. After watching this informative video It will be either Japanese or Taiwanese for sure. Than you very much.

Everybody is always on about safety, but all things being equal, dust masks might be a good idea given how fun silicosis is.

Muito bom trabalho e dedicação 👍👍👍

Ah yes, nothing like wearing full protection safety flip-flops when working with hot splashing liquid metal

Instructions for making a lathe... 1. dig a hole.......

God Bless your awesome work! Greetings from Brazil

Buried before getting born...lathe story.

This is how the west did do its great industry. Still actual and amazing process. This people are amazing, hard working workers.Love them!

Anyone who thinks they have a tough job here in the US of A needs to watch these guys earning a living working with molten steel while wearing flip flops and bed sheets!

Le a kalappal! Nagyon ügyesek!

Congrats on your filming and editing. You create a narrative by taking time to setup shots. Just as the foundry-men are artisans in their own right, these videos display the talents of their creators. Well done.

How far would any one of them have to travel before encountering a pair of closed toed shoes?

Just remember when one of you guys buys a cheap lathe that is made in Pakistan or another middle eastern country this is how it was made so dont bitch if it isn’t perfect straight out of the crate.

Mis respetos a todos hombres k contribuyeron para fundir al bendito torno , al operador de cepillo puente , muy listo , él lo acopló al escote con un solo perno i sin ajustar la base , les deseo éxitos a todos ellos x k contribuyen con la hermosa obra de fabricar al torno , k Dios les bendiga, saludos desde PERÚ 🇵🇪 💪💪🤝

Thought I saw Mr. Pete in the background!

Great pajamas and man dresses! 👍

great video, qq what is the paint that you use on the mold?

Y esto es en Pakistan? si es asi, esta gente hace de todo!!

The next time i'll use my lathe, i'll remember you guys. Congratulations.

Increíble todo lo que hacen en ese país 🙌🙌🙌

Why do we need insane HSE laws in Britain ? Why can't we wear safety flip=-flops ?

How on Earth can a civilization capable of manufacturing tools choose to work so inefficiently? If these people took an 15 extra minutes to make a better shovel, bucket, lift or mold with the resources in front of them it would double their output and wellbeing.

I love that it takes a shaper/milling machine to make a lathe to make parts for the shaper /milling machine

It would be great to see how they finish it off

How did they make the lathe that made the lathe?

I watch a lot of these videos...from building heavy trucks to making pans...trying to figure out ,, are they mad or what ?

How they do quality control?

Que tipo de material é esse ? Argila que ele tá cavando ?

51:12 каверны, непролив

Amazing talent, work ethic, and determination. Bravo. Hard to find this in modern society today.

Dude … congratulations!!! Really good to know this method of production

Amazing 👏

A few discontinuities...Nothing a little filler putty and a 6mm of paint won't fix😁 However you have to love single point planing for cast Iron machining

Primitive engineering at its best you could only build a lathe like that working for no money.

Hello sir I want to buy late machine nice tq.

One process shown, missing the other 100 things that need to be done

All of that machinery was thrown out by the UK and it’s still going strong. I served my apprenticeship on a shaper just like that.

How do you keep any kind of tolerance with those machines?

What is the gray stuff used in 16:00 ? Graphite with water?

I wonder if the tool truck ever comes by.

а какую формовочную смесь они используют?

Title should be Making a Lathe Bed, because that's all they made. It would have been interesting to see the next steps in the process of actually making the Lathe Machine.

If pakistani Gov wasnt curropt people have golden hands and bright minds and v hard working ppl of Pak i appreciate their work and devotion

Props to these guys that can make almost anything with dirt, a broken stick, and a electric wire, but @Veritas419 makes a point. What happens when a chain breaks and a giant blob of steel mashes off both feet?! I don’t think I’ve seen so much as a pair of safety glasses or gloves in the last five videos I’ve watched! And sandals! Don’t get me started… Maybe they have really good 401k’s that can help feed their families when they become quadriplegics’…

@36:15 Is that steel or cheese? I’ve seen blocks of parmesan that were, not only harder to cut, but less flaky.

This is more primitive that 19th century UK.

Any videos of them making concrete floors or brooms to sweep them? Because that really would be incredible.

Um trabalho admirável, tem todo meu respeito (mas é um video cansativo, podem reeditar e contar a história toda

Love the planer. I suspect it's a local copy of a 19th century English machine

What will the lathes be branded ?............cheers.

Sou torneiro mecânico,barramento sem tratamento de dureza?

Fantastic health and safety flip flops, even bare feet at times, incredible working practices.

52.35, cómo hacer para tapar esos agujeros que quedaron en la fundición, para las piezas que tienen que pasar por ahí? Soldadura?

These amazing workers are masters of adaptability.

Is not perfect world,and they are great peoples👍👍👍👍👍👍👍

Это делается для макета станка же? Ведь для макета?

3 Stars metal work for bed lathe machine !

Cool old school machining!

OSHA approved.

The hot metal pot is 200 lbs or more. What if they person behind trips and falls while carrying molten metal pot. Very dangerous.

Me gusta como trabajan muy escaso de recursos. Lo malo que usan muchos Niños para trabajar.

best workers i likE

Nice job!

Impressiona a péssima qualidade do aço utilizada para formar esta peça. Em um país um pouco desenvolvido não passaria em nenhum controle de qualidade....

Crucibles of molten iron, open-toed flip-flops, no gloves or goggles, unguarded open pits, obstructions all over the ground. What could possibly go wrong? You have to admire the skill and dedication, though. How many hours does it take to just build up the moulds?

Quality meehanite iron castings for sure.

What is precision of these rather crudely made lathes in micron? mm? metre?