AMD AM5 Solid CPU and Ram Light, No Post, Possible Solution

Подписаться 34 тыс.

Просмотров 70 тыс.

50% 1

i encounted and issue with a B650 Board, which looked like a failed stick of ram turns out it was the CPU that failed
================================================
================================================
Tools that i use frequently that are Ali-express Affiliate linked
Sunshine S-918E Heatpad: s.click.aliexpress.com/e/_DF8...
Previously i had a CPB Heatpad, but that died late 2022, so i am now using
The Sunshine S-918E
B7000 Frame Adhesvie: s.click.aliexpress.com/e/_d62...
my go to glue for almost everything now days!
Thin Metal Pry Tool: s.click.aliexpress.com/e/_dTz...
Used to open ipad and remove glued back covers on phones
Heat Resistant Tape: s.click.aliexpress.com/e/dQ283f6
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpress.com/e/bO46kXwg
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpress.com/e/cK4DNmIU
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpress.com/e/bH1lqUe4
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexpress.com/e/_AkLHNJ
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexpress.com/e/_9HNS4h
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexpress.com/e/_Bf7...
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexpress.com/e/_dWF...
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexpress.com/e/_dU2...
The Black Tweezers i use in my videos
Large Metal Pry Tool: s.click.aliexpress.com/e/ckqD1TNQ
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpress.com/e/y0dvtNW
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexpress.com/e/_dXD...
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpress.com/e/miqk2Le
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools are out is:
Wozniak Store: s.click.aliexpress.com/e/9eDP9uy

Наука

Опубликовано:

21 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 147

@FurriousFox 7 месяцев назад

I think I have the same issue, I looked at the 4-pin, 3-wire PC speaker pinout from wikipedia. I wonder, can I just use a multimeter instead of a speaker to test if it's a cpu issue or a motherboard issue?

@jongomezdev 5 месяцев назад

SO glad I came across this video! For me, the red light always turns on during startup however sometimes it stays on, sometimes it does not.. but my ram is always accounted for I have 4x DDR5 sticks and never run into any issues while gaming (even if the light stays on)

@rickstechrepairs 5 месяцев назад

odd. hopefully all good now

@LokiLogic 2 месяца назад

I have the same problem, everything runs and works fine however my red light stays on.

@jongomezdev 2 месяца назад

so I figured out - turning on my monitor first - then firing up the pc, the light goes away.

@trailduster6bt Месяц назад

@@jongomezdevthat’s bizarre

@LeonardoVimbela 12 дней назад

So if I unplug the RAM and I turn off and turn back on the pc and I hear the little noise coming out of the speaker port what do I do?

@erickeller4685 23 дня назад

Nice video, and I was hopeful as I'm seeing the same issue (DRAM LED on). But, when I plug in the speaker, I do hear the three beeps when DRAM isn't installed -- which is what you say is what we should hear with a working CPU. When DRAM is installed, there are no beeps. Where would you go next in that case?

@ianjameslake 8 месяцев назад

The "Wait 5 minutes" for ram to train, reminded me that these new boards are different (or so I've read offhand a few times), and initial boot sometimes needs loads of time to post... Lo and behold, I stuck both sticks in again, then left it for 2 minutes, and it posted. lol. Here I was thinking it should post within 5 secs no matter what (like older boards). So I kept trying to re-seat the ram to get that dram light to switch off, so it would post. Anyway, it's working now. Thanks for the reminder. :)

@rickstechrepairs 8 месяцев назад

great to read this has helped. Enjoy your PC :)

@AsifKhan-tw7ye 5 месяцев назад

@@rickstechrepairs Did it work? Mine Ram slot 1 and 2 not working but 3 and 4 working fine. I dont know what to do please help if you can.

@billpii6314 2 месяца назад

@Lionhearrtt If the fan is running its fine

@protobolt5325 4 дня назад

Does the dram light stay on during the Ram learning process?

@ianjameslake 4 дня назад

@@protobolt5325 From what I remember, I believe it was, as was 1 other light on my mb (gigabyte b650m aorus elite). The main thing is to just turn it on, and leave it sit for a few mins. If you get to 5 mins, then there is probably an issue. But it should turn on somewhere before that. On my mb, it takes around 1-2mins to boot, even these days (I had no success using memory restore for some reason).

@tkkak1932 Год назад

I need help. Old HP pavilion 590 with a sunflower mobo and trying to install a i5 2600. The fan hole don't line up but MOBO says it compatible

@rickstechrepairs Год назад

no idea on that

@onuroksuz9097 2 месяца назад

Hello, I am experiencing the same issue. I already had 16x2 RAM, and I bought 32x2 RAM (all RAMs have the same MHz, model and CL). I wanted to upgrade the RAM of the new PC. I installed it, and both the CPU and DRAM lights turned on, but the PC wouldn't boot; it wasn't booting at all. I tried everything, including resetting the BIOS, but no luck. I ordered new RAM, but the same issue persisted; the PC wouldn't boot. like a week ago when I managed to enter the BIOS, I saw the RAM was operating at 4800 MHz, whereas it should have been at 6000 MHz. Thinking this was the issue and I bought new DDR5 4800 MHz RAM, but the PC still didn't work, with the CPU and DRAM lights on. So, these problems occurred while I was trying to upgrade the PC's RAM. What do you think the problem is, and what should I do?

@its_not_the_Ishu 2 месяца назад

Hey I'm having the same problem ....did something solve it?? plzzz respond 😢

@onuroksuz9097 2 месяца назад

@@its_not_the_Ishu Actually, I partially resolved the issue, as mentioned above. I purchased 2x32GB RAM at 6000MHz, but they didn't work. So, I bought cheaper RAM at 8gb 4800MHz, which also didn't work initially. Surprisingly, when I tried 8gb 4800MHZ in slots 2-4 on the motherboard, they started working and now even both 2x32GB RAM sticks at 6000MHz working. However, I want to add two more 32GB RAM sticks to have a total of 4x32GB in my computer. Unfortunately, when I tried placing RAM sticks in slots 1-3, the computer wouldn't boot at all. I also observed that when I placed 32GB RAM sticks in slots 1-3, the computer restarted three times and then failed to boot. But when I tried using 8GB RAM sticks in slots 1-3, the computer simply wouldn't boot. I haven't had the time to looked it, but I believe there may be a solution to this issue that I'm not aware of. If anyone has any suggestions, please let me know. Motherboard: Asrock B650M-C RAMs: DDR5 RAM 32GB Kit (2x16GB) 6000MHz CL38 (came with my computer) DDR5 RAM 128GB (4x32GB) 6000MHz CL38 (newly purchased) 8GB DDR5 4800MHz PC5-38400 CL40 (purchased to troubleshoot booting issues, which worked)

@elatee 2 месяца назад

how'd you get into bios?

@rsilvers129 18 дней назад

6000Mhz RAM works in 4800. It is just able to also work at 6000.

@dbc1702 2 месяца назад

same happened to min and the pins on the AM5 cpu socket were damaged, even though the dram light came on and not the cpu light

@rickstechrepairs 2 месяца назад

damn, no good, atleast you know whats wrong now :(

@dragonsmoney1311 7 месяцев назад

Hey man new to building I just put together a nzxt b650e, 7900x with corsair dominator ram and I can’t get it to post. Tried test each ram one at a time, reseating the cpu, double check all the wiring, clearing the cmos and I’m just stumped. Any suggestions?

@VAYYRL 7 месяцев назад

Did you figure it out?

@dragonsmoney1311 7 месяцев назад

Yeah I got the pc running with 2 sticks of ram but I can’t it get it to run with 4 sticks

@MrCheetahz 4 месяца назад

same exact thing is happening to me

@jetheridge2 2 месяца назад

I have the same set up and I can't get it to post with just two sticks. 😢

@dragonsmoney1311 2 месяца назад

Make sure your psu has enough power for the setup then make sure everything is plugged in. If it still won’t post try different ram slots. If the problem still persist try reseating your cpu. Don’t forget to let your ram try to train it self it may take a while. Use pc part picker to make sure everything is compatible.

@iMysh77 6 месяцев назад

Hey i have this issue now im about to destroyed my pc my psu wnet crazy just exploded in front of my eyes im so despondent that I never thought to buy Laptop insted 😅, thanks buddy

@AlexLopez-tv 5 месяцев назад

Does anything turn on?

@frsfthg9212 4 месяца назад

Yes the house is on fire@@AlexLopez-tv

@toothpastefan27 21 день назад

I hope this is made up ain’t no way ur psu just frickin exploded

@slainn12 10 месяцев назад

Great just bought one my first AMD processor and this may have happened to me grand....

@rickstechrepairs 10 месяцев назад

hopefully and easy fix for you

@ashiswrong 5 месяцев назад

Did you end up finding the issue? I am having the same problem as well...

@slainn12 5 месяцев назад

No I had to get another CPU@@ashiswrong

@benhenderson9407 3 месяца назад

Same her... It's been a nightmare

@cardogyyy3731 6 месяцев назад

Exact problem tried all new components and bios updates ect. Trying to leave it running for a bit see if it posts

@MileytheJeepV2 4 месяца назад

Did that end up working?

@gus_100 4 месяца назад

Did it work? Imma gaving the same issue

@cardogyyy3731 4 месяца назад

@@MileytheJeepV2ended up being a faulty motherboard for me, new am5 have bad instability problems

@cardogyyy3731 4 месяца назад

@@gus_100look at my other reply

@robertmaftei9749 2 месяца назад

Yes i work but the MK dont work…

@WorkedTV 2 месяца назад

Im getting the same issue my pc wont even boot on

@michaelbliss8563 21 день назад

I have the same issue with the red DRAM light on my B650. Brand new build, but booting just does nothing most of the time and leaves me with just that same DRAM light on. Maybe 1/10 times it will actually boot to windows. I've tried RAM in different slots, just one. Tired disabling XMP, enabling memory... But now, after watching this, it's making me think it's the processor... Which is a AMD Ryzen 7 7800X3D.

@its_not_the_Ishu 2 месяца назад

I have both cpu light and dram light on ...motherboard is msi project zero b650 so its hella expensive and r5 7600x ....I tried everything like bios update ,reseating the cpu , reseating the ram but still those cpu debug and dram lights are on...Plz help me

@rickstechrepairs 2 месяца назад

I would be trying another cpu

@its_not_the_Ishu 2 месяца назад

@@rickstechrepairs hey bro my problem solved ....my aio cooler bracket was too tight..I had to loosen up a little bit and try one stick of ram at a time

@muhammadafrizan4922 5 месяцев назад

Hi, i using msi b450 tomahawk max motherboard, the cpu light is on, then i change my motherboard to asrock b550m pro4, cpu and ram light is on, i trying using buzzer, but no sound at all, even the cpu and ram light on, so what do you think? Its my cpu or ram is bad I using ryzen 5 3600

@mohamadtabikh1361 5 месяцев назад

i have the same problem did you find the solution

@user-ln5et1zi1c 4 месяца назад

what did you do?

@user-ln5et1zi1c 4 месяца назад

did u know the problem

@h.m.hibrahim 3 месяца назад

+1 CPU led always red, no display, i don't know Changing my cpu or my motherboard i need help.

@revvortex5100 3 месяца назад

Same issue here and can't find solution any of you guys found the solution for it??

@mrxeku12 7 месяцев назад

Is there any way to fix that memory controller on the faulty cpu?

@rickstechrepairs 7 месяцев назад

@mrwhite5237 4 месяца назад

So i have a problem where i would latched the ryzen 7 7700 on my msi b650 board and it would not do anything but once i unlatched it. It would turn on.

@rickstechrepairs 4 месяца назад

by latch you mean install the CPU cooler? is it an aftermarket cooler?

@mrwhite5237 4 месяца назад

@@rickstechrepairs the tension from the stock bracket

@Xyro_Milly 3 месяца назад

Please help me I got the same components as you

@chrismagallanes8858 3 месяца назад

@@Xyro_Milly what cou your using

@chrismagallanes8858 3 месяца назад

@@Xyro_Millymine was a faulty cpu that i bought so i bought a new 7600x and it worked

@Oldmanwithacan 3 месяца назад

Is the red light supposed to come on at start up and then go off?

@tymoving9106 2 месяца назад

did you ever find out I have the same question

@Oldmanwithacan 2 месяца назад

@tymoving9106 no I haven't.

@iTzJOHnNyY 2 месяца назад

It is supposed to go trough all the lights, first cpu then dram then gpu then boot, it may do the process multiple times. I've hear of ppl who their cpu/dram lights are on but they boot with out a problem. Yes it should go off once your pc boots up

@geosaurier4192 2 месяца назад

Great video🎉 Where do you got the post speaker because I want to buy one My Issue is that I get random blackscreens and when the pc has to restart it works fine. But when I want to restart it on my own it shows me the dram light and doesnt post. I wonder if its the ram, the memory controller or the mainboard itself. I have a 7800x3d, x670 aorus elite ax, teamgroup 6000 cl30 Ram. I would really appreciate your help. Thanks in advance

@iamvyanky 2 месяца назад

Having the same issue from 1 month 🥲🥲

@trepp22 17 дней назад

Yes, I have the same problem, the computer will turn on only by rebooting and I also have teamgroup 6000 and 7800x3d. Were you able to solve this problem somehow? 😕

@TheJamaicanCrusader 2 дня назад

just finished my build and i have a red cpu light and yellow dram. I tried resetting cpu and ram in different slots and still nothing. Could it possibly be a bios update needed?

@rickstechrepairs 2 дня назад

tried single stick of ram? once booted have you left it upwards of 5 minutes? What CPU and Board?

@TheJamaicanCrusader 2 дня назад

@@rickstechrepairs havent tried one stick, leaving it on now as we speak, and msi mag b650m tomohawk, ryzen 5 7600x

@Latoko 19 дней назад

My HD LED blinks amber, does anyone know what that means? my computer still works with no complications.

@rickstechrepairs 19 дней назад

HD Led Blinking, means the computer is reading/writting to your SSD or Hard Drive

@Latoko 19 дней назад

@@rickstechrepairs Okay, thank you!

@NotMuchHere 2 месяца назад

I think i might have this issue ... however I used a 4 pin CPU, not the 8 pin, or do I need 12 ... why cant it ever be easy

@GamingAgents 5 месяцев назад

I have a similar issue with 2x16 DDR5 6000MHZ RAM, only 1 of them is posting so I believe that the other is faulty.

@rickstechrepairs 5 месяцев назад

Damn not good

@therealvix4746 3 месяца назад

I tried installing windows i plugged in the flashdrive with windows saved and continued in the bios nothing posted so i tried to turn it off and back on again then the ram light and cpu light came on after i turned jt back on idk what to do

@rickstechrepairs 3 месяца назад

did the pc post at all, prior to putting in the USB?

@therealvix4746 3 месяца назад

@@rickstechrepairsno it didn’t but i did look up a bunch of tutorials and called some guys and figured it out

@onuroksuz9097 2 месяца назад

@@therealvix4746Could you please tell me how they figured it out?

@flippz4189 2 месяца назад

@@therealvix4746 Hey mate can you please post how you fixed this I have the same issue...

@therealvix4746 2 месяца назад

@@flippz4189 i took a screwdriver and touched both pins on the jbat1 part of the motherboard or it might have been the jocfs1 part for 5 seconds dont know how but it booten into bios after that so i downloaded the windows installer onto a different flashdrive and it worked

@kyronanthony7339 4 месяца назад

So mine doesn’t come one at all I bought it from micro center and I’m just stuck with a dozen 7800 xd an all other parts for a pc build

@erikhernandez3418 3 месяца назад

Wait you can exchange the parts ? I’m having the same issue 🥲

@fast_eddie3441 2 месяца назад

7500f and asrock b650 hdv m.2 with Corsair 32gb kit not posting. Tried everything so far as suggested but still no post on a new build. Red lights just scroll on the motherboard. Tried for half an hour. Will pull it all out again and stick it on the table and see if it works part by part 🥴

@fast_eddie3441 11 дней назад

Swapped out display cable and it worked 🤔

@Southlands-Mutt Год назад

I bought one of these motherboards four days ago, wish me luck.

@rickstechrepairs Год назад

Good luck!

@Southlands-Mutt Год назад

@@rickstechrepairs dude i have the same problem i didn't get my first post.Tried Socket A2 and B2 and it worked, but its working 4800 by default.If I try using all sockets or going higher, all goes to shit.

@Southlands-Mutt Год назад

@@rickstechrepairs with the 7600x of course

@mmawzrd 7 месяцев назад

@@Southlands-Mutt any updates?

@badluck6474 2 месяца назад

If my computer has a black screen how the hell im a going to go onto google and download something

@rickstechrepairs 2 месяца назад

another pc, phone,family computer, friends laptop, school computer, library computer

@jasperb8508 8 месяцев назад

Thank you for the video! I was able to boot succesfully with a ryzen 5 7600x with Gigabyte B650 gaming x and Gskill 6000MT ddr5!

@nishchaysaxena3148 3 месяца назад

Heyy please help me i have same confurigation too but not booting up and light and coming only fans are rotating

@jasperb8508 3 месяца назад

@@nishchaysaxena3148 just wait a really long time, mine took about half an hour to boot the first time, now I boot in a couple of seconds!

@billbutkis 2 месяца назад

@@jasperb8508 so don’t take off the cpu and readjust or refigure the ram? Just leave it running? I just built mine and felt absolutely defeated seeing the red and yellow :/ I triple checked everything except the cpu pins

@shivprasadp172 2 месяца назад

Same problem even i am facing please help me out@@billbutkis

@mucahitozer 2 месяца назад

@@billbutkis did you fix your issue? I have same problem. 7600x 4x16gb 5200mhz ram. B650 tomahawk. Cpu and ram lights is on and its no display.

@noahm5705 10 месяцев назад

Did you fix it? I just build my pc and the cpu and dram lights are on

@rickstechrepairs 10 месяцев назад

Solution was in the video

@chriswernet6778 9 месяцев назад

Did you find the solution i build my pc yesterday and today when i came back from work the cpu and dram lights are on

@noahm5705 9 месяцев назад

@@chriswernet6778 it was a faulty motherboard, I ended up exchanging the ram and motherboard

@tobiasg.8532 7 месяцев назад

I had the same issue but in the end i changed my ram from lane 1 to lane 2 and everything worked after :)

@noahm5705 7 месяцев назад

@@tobiasg.8532 oh well that was easy, I ended up having a faulty motherboard

@scottmurphy3005 23 дня назад

remove all parts cpu gpu ram nvme ect power on with all parts out an reinstall everything my new amd build did the same thing it posted after i put it all back also remove cmos batty at same time

@destroydoom1689 7 месяцев назад

Can I refund the cpu if this is the case?

@rickstechrepairs 7 месяцев назад

I would try

@rsilvers129 18 дней назад

Same. I have tried three motherboards from two different companies. Two 7800-X3D CPUs. Two power supplies. Two sets of power supply cables. Two monitors. Two video cards. Two video cables. Flashed the BIOS. Tried two memory sticks. One memory stick. Nothing.

@rsilvers129 18 дней назад

I changed to a different brand of RAM and it works now!

@Dial8Transmition 2 месяца назад

PC has worked fine for many years, turned it on this morning and refused to post. DRam light on, tried every RAM combiantion, resloted my CPU, flushed cmos, flashed newest bios, dusted and vacuumed everything in my case, carefully cleaned the RAM stick and slots to make sure there was no debri or grease. Still nothing This is so frustrating, it happened overnight and I can't think of any reason as to why it happened. Never done any overclocking, my PC has never overheated, motherboard and CPU is no older than 2 years.

@tahirguven8680 2 месяца назад

Built a new system with new and used parts, gigabyte x670 x gaming ax /7600x/ddr5 6200. Was working fine, then restarted, got a dram light when i changed nothing, removed one stick It booted, after another restart it refused to post with even one stick

@duyhungphannguyen3049 2 месяца назад

Did you find the solution bro im having same issue :(

@Dial8Transmition 2 месяца назад

@@duyhungphannguyen3049 No, sorry. Spend a few days tearing my hair out trying different things but nothing worked. I eventually sent the parts back to the shop 2 days ago for them to take a look. They have not gotten back to me yet, but if I remember, I will let you know what they say once I get it back

@reuvenraginmund9570 2 месяца назад

@@Dial8Transmitionmobo fault probabily, same happened to me … I RMA cpu and ram but nothing work …. So the problem was the msi mobo with ez debug led E0 and dram light orange/yellow on… i understand your frustation, i hope your ploblem will be fix

@Dial8Transmition Месяц назад

@@duyhungphannguyen3049 It was my CPU I guess. They didnt say anything, they just returned my motherboard and RAM back along with a brand new CPU

@clintwalton6736 3 месяца назад

Tive esse problema recentemente na aorus b450 pro wifi, os coolers disparavam, o PC não dava vídeos e ficava travado o led ora na cpu, ora na dram ou até mesmo no vga, depois de testar todos os componentes aqui o problema era na bios da placa, paguei 350 reais e até agora está tudo funcionando bem.

@Jeuka93 Месяц назад

I'm having this same issue, I got a new CPU on the way, if I remember ill report back in...

@rickstechrepairs Месяц назад

Good luck

@DeidaArt Год назад

Hi, thanks for video ! I had the same issue yesterday when I built PC with 7600X and Aorus B650 Elite AX. RAM is Gskill 5600 CL28 XMP. I ordered Corsair 6000 CL36 EXPO to see if it does the same issue. Hope its not CPU...

@rickstechrepairs Год назад

fingers crossed

@DeidaArt Год назад

@@rickstechrepairs Finally it booted, ClearCMOS with screwdriver and it worked. Dont even need to try the Corsair Kit ^^

@hasbokiller 10 месяцев назад

Hi please could you tell me what you did. My friend has this motherboard with an AMD ryzen 5 7600 x. The PC will boot fine but after about 5 to 40 minutes the display will go, fan still running and cpu light emits on motherboard. Temps are fine, re-seated cpu, changed RAM around.We have remove battery from MOBO, is that the same as using screwdriver?@@DeidaArt

@DeidaArt 10 месяцев назад

@@hasbokiller Finally it was an issue with RAM. It stopped working after 1 week and never booted again. I changed for Intel and I had the same issue, at the difference that It booted but With BSOD. MemoryTest revealed that One stick was defective. But on AMD it never booted even by changing stick so I couldnt guess that it was RAM issue.

@juliuSZcsgo 8 месяцев назад

Ffs I got the same 7600x and aorus b650 elite ax, and CPU + DRAM lights on.. struggled 6 hours already. Trying to update bios next.. and next with one ram stick