Amiga Pistorm EMU68 how to plus more!

Подписаться 16 тыс.

Просмотров 22 тыс.

50% 1

E286: The new Pistorm EMU68 , what is it, how do you get it and is all that?
in this episode i show you how to configure EMU68, hard drives, setups and install a base wb314. then i show you a way that you dont have to touch any of that. but i wanted you to know how to do it in case you wanted to do it yourself! Hope this helps you! Special thanks to the entire PiStorm team, Michal Schulz (creator of emu68) and the many others that make this possible.
Remember, this is MY take on this. I know you can build a workbench in Winuae, and I do use this to copy a bunch of stuff back and forth as there is currently no pi networking. (at the time of filming this) (plipboxes, and your Amiga network cards will still work though). So please keep that in mind. Teaching a man to fish. .
PiStorm Discord for the newest and latest information!
/ discord
get EMU68 nightly builds here:
github.com/michalsc/Emu68/rel...
and the main EMU68 emulator page from Michal
github.com/michalsc/Emu68
Caffeine OS - is created by Capt LeChuck and here is his YT chan:
/ @captlechuck_
Like , Comment, Subscribe or support,
If you would like to help me keep this going, consider supporting my channel , either through patreon for as little as 1$ a month,
/ chrisedwardsrestoration
Or a one time Paypal donation at paypal.me/macphreak4evr you should see a irish captain picard. holding a green beer.
(you will see)
Thank you to all my current patrons and supporters, I can not express how much your support means to me. you are all listed in the description below
Also be sure to check out Retro Rewind for all your Commodore goodies and services at www.retrorewind.ca
you can use my code NOCODE, to save an additional 10% off your next order. ** Thanks everyone!!!
or go right here and save EVEN MORE t.co/YDpe16PNSb?amp=1
Elite Patrons
Aaron Bond
Ady Bolton
Alexis Beaumont
Alvin Franklin
Andreas Karlsson
Charlie Underwood
Craig Daters
Darren Attwood
Daniel Varga
Dominic Demarinis Sr.
Jason Voak
Jonathan Wickett
John Dawson
Kevin Avery
Kevin Quattro
Luis B Perez
Martin Frei
Martin Moore
Mattias Axelsson
RF C
Sebastian Gray
Stephen Bruce
Steve Kile
Steve Thompson
Sutehk
Toni Moisio
Wayne Lymbery
All Access Patrons
Alan Romeril
Amiga Bill Winters
Brett Armstrong
Chance Davis
DigitalPig UK
Espen Mostue
Garry Heather
Gaz Edmunds
J. Walter Hawkes
Jay Jarvis
Jonathan Wickett
Kim Jensen
Lars H
Luca Argentiero
Litwarski
Mark
Mark Kierzkowski
Mark Jaques
Mark Pearson
Mick Stone
Matthew Moebes
Neil Bradford
Nimh Oli
Pepa Wastl
Phil Cherry
Thomas Vogt
Scott Jones
Wanderley Ceschim
Zobeid Zuma
Official Patrons
Adam Currie
Adam Templeton
Alan Day
Alexander Sharikhin
Antonio Drusin
Ashley Clifford
Ashley Dawson
Andrea Pizzichini
Andre Bergei
Ash Green
Brian O’Neill
BunnyBrewster
Chris Cantwell
Chris Green
Chris Kmiec
Chris Trickett
Craig Sharpe
CubicalNate
David Black
David Obrien
David Martin
David Z
Dennis Garman
Dick van Ginkel
Dimitris Gialoglidis
Edvin Helland
Etosha69
Frank Haaland
Frank Muscato
Frederico
Garry Heather
Geekology
Gerald Gibbons
Gerco Dries
Graham Tomlinson
gjoken
Jablanka
Leszek Kaminski
Lukasz Pryt
Markus
Mark Amorin
Mislav Krleza
Matthew Augustine
Matthew Rasnake
Matt Houghton
Marc
Mark Amorin
Matthew Hoe
Matthias Schüssler
Michael Englyst
Michael Fuerst
Mike Roach
Mislav Krleza
M W M
Nicklas Berg
Nick Roper
NoeleyC
Niklas Arvenberg
Paul Danger Kile
Pawel Solecki
Pelle Norberg
Peter Sterk
Ramon Schmitt
Remon Kooijman
Ramsey Harrison
Richard Brayshaw
RoC
Rod Piercy
Rok Štibler
Russell Fairey
Simon Chatterley
Simon Lee
Skylos
Sven Gugelmann
Svein-Inge Kallevik
Tristan Grove
Tom Brooks
Yngve Eide

Наука

Опубликовано:

9 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 182

@theamigashow9506 2 года назад

Michal Schulz (creator of Emu68) has a Patreon. It's a good way to support this effort. Nice video as ever Chris.

@brostenen 2 года назад

Since I saw EMU68 some 3 or 4 months ago, then I have said that this changes everything on the PiStorm. This is a game changer. Reason is that we are talking bare-metal, and we saw it with these RPI versions of Vice as well. No OS and file system under the hood that can get corrupted the same way as Linux when shutting off power.

@another3997 2 года назад

Tossing out the Linux OS does have it's pros and cons. Greater speed and lower memory usage are huge pros, but you also lose all the tools, file system access and general hardware/software interfacing that Linux provides. Everything has to be written from scratch to work on bare metal. In general terms, running a program on bare metal doesn't automatically guarantee it is more stable and less susceptible to damage. That all depends on the programmers. But I wish the team all the best, they do amazing work!

@brostenen 2 года назад

@@another3997 I think that in this case, the person who make EMU68 on his own, really do think of what is good to have and what is overkill to have.

@poshpaul55 Год назад

Thank you chris for showing this setup for the pistorm you rock chris 🤜🤛 im in the middle of building my pistorm A600 just waiting for my Raspberry Pi model 3A+ All so thanks to everyone in involved in making the Amiga Pistorm 👏👏👏👏👏You Guys Rock update on 18/10/22 i have got my Raspberry Pi model 3A+ and watch your video and now i pistorm my a600 and a fast as hell now thanks mate

@Chrisst1961 2 года назад

A shout out to the Captain for Caffeine. Thanks for the video Chris. Got a PiStorm a while ago, but had not found the time to set it up.

@patrickgomes15 8 месяцев назад

Great video, Chris. I learnt a LOT, thank you, and it was a fun watch too!

@RetroGameCoders 2 года назад

Seems every time I search for Amiga related keywords your videos come up - great stuff again :)

@ChrisEdwardsRestoration 2 года назад

i kinda have a problem... lol

@MegaRipZ 2 года назад

Thanks, Chris! Wonderful video guide! Thanks a lot!

@MartinDomino 7 месяцев назад

Thanks for the guide, my piestorm is in the mail. it gives peace of mind and hope to get it up and running on my A600

@johnwiesen4440 2 года назад

Another very informative video. I have a spare A500+ I will do this way using the EMU68 and OS 3.2.1.

@billkar8129 2 года назад

Thanks for the video Chris, i'm having a great time with the PiStorm and trully recommend it to friends all around. (does good to the wallet too)

@raulsimon9733 2 года назад

Wow great job Guy!.

@dasfaustsretrogaming2620 2 года назад

Looks awesome, thank you!

@patricksantinelli9513 2 года назад

Great ! good job .i really appreciate your video .

@ralphshtripaider35 Год назад

You Sir are the Master!!!

@stephenbruce8320 Год назад

Well I got motivated and installed the Pistorm600. Honestly I bought it a long time ago and forgotten about it and was about to buy another when I saw I had bought one from Sorden before. I also bought a couple more 3A only to find I had two waiting to be used. Yea I buy tons of things and because I am not in a mood to install them I put them off and yea often forget what I have especially if I move it off my desk of things to do. Worse is when I know I have something but spend all day looking for it. Anyway I have to get caught up with what I have and stop buying stuff.

@HoldandModify 2 года назад

Great video! I did not know EMU68 was this far along! And sorry for Discord bombing you in the video! lol!

@ChrisEdwardsRestoration 2 года назад

Its further than this. This caffeine os version i have is older as i filmed this 2 months ago

@andrewenglish3810 2 года назад

Emu68 has 14bit audio so you can play MP3's. RTG. Caffeine and 3 2.1 works very nicely. Oh and a guy named Tomcat has OC'd the Pi and posted sysinfo benchmarks. 😀

@cullmaster7361 2 года назад

Great stuff Chris 👍🏻 It’s a great time to be an Amiga owner. I notice a lot of the PiStorm stuff is aimed at the OCS and ECS Amigas. Anything available for the AGA systems yet? If so any chance on putting a video out on covering this? Cheers! 😉

@ChrisEdwardsRestoration 2 года назад

Pistorm32 still in the works

@BalduinOrgMusic 2 года назад

Great video, thanks. Can the HDToolBox setup-part on the RAW partition also be done within WinUAE by adding it as a harddrive?

@ChrisEdwardsRestoration 2 года назад

carve out in windows first, then add them with admin run in winuae and build yes

@CaptLeChuck_ 2 года назад

Huuuuu that CaffeineOS version is old! Network works already. We have to get you updated Chris. Awesome video like always.

@ChrisEdwardsRestoration 2 года назад

Just a teach a man to fish story. Updates later. Please remember i filmed this almost 2 months ago!

@Voyager_2 2 года назад

@Ed Straker I thought you were done with emu68.

@Berend70 2 года назад

Where can we get a version of CaffeineOS?

@Voyager_2 2 года назад

@@Berend70 You have to ask the captain but in pirate speak.

@ChrisEdwardsRestoration 2 года назад

@@Berend70 msg pedro on the pimiga discord server, it is a private link not publicly shared

@HollaDieWaldfee1 Год назад

I have learned a lot. Thank you very much Chris. Now i can say: Iam a real Amiga Noob😂😂😂

@HivernaalChannel 2 года назад

Great ! Thank you !

@alanhaynes4576 Год назад

Chris, I can easily see the difference in speed between the original PiStorm and EMU68. Does the version of the Raspberry Pi Used have any bearing on that speed? For example, would a Pi 4 run EMU68 faster than a Pi Zero? And, roughly how much difference in speed? Great work as usual Dr. Chris

@ChrisEdwardsRestoration Год назад

in the standard sysinfo tests, the dhrystone/s mip/s and mflop/s , yes... However the chipspeed thing has always been a problem, I think my tests of the pistorm vs pistorm32 are inreased only due to the increased processing power of the more powerful pi units.

@ant64b 2 года назад

Hey Chris, I'm not in the Amiga community whatsoever and just enjoy your videos. Can you maybe do a video about the operating system you were using in this video? CoffinOS?

@Richard-ys9zo Год назад

Hey Chris, so when using the piOS Mushashi, you have to program the CPLD on the piSTORM, I imagine that is needed as well for EMU68?

@ChrisEdwardsRestoration Год назад

No it shouldnt be as its a bare mental emulator

@jonathanrichter9068 2 года назад

Thanks Chris

@claudiobraccia103 Год назад

Hi Chris, great video, when I tried to do a “New simple volume”, for the Amiga partition, I can not select it as it is “gray”?

@ChrisEdwardsRestoration Год назад

maybe make sure the card is cleaned. like diskpart, select disk x, then type clean, or use sdcardformatter from sdcard.org

@ogremgtow990 2 года назад

I wonder if the Pistorm would work in an Atari St. No hate please just curious .

@rxblackpill 2 года назад

I love the PiStorm so much. Have you ever tried one with a MAX V chip? Would love to see you try it one day.

@ChrisEdwardsRestoration 2 года назад

No these were the knockoff boards that others built, claude and the team made cpld compatibility for them. Idk about emu68 on those

@rxblackpill 2 года назад

@@ChrisEdwardsRestoration Yeah, it would probably be pretty taxing on one, and the implementation would be a bit of a hassle

@Snowcrash777 Год назад

Thanks!

@Snowcrash777 Год назад

@Chris Edwards Restoration I was forced to remember some things from about 30 years ago and learn some things about the Raspberry Pi SBC but I grinded this out step by step even after finding the Github. I did search a good deal for what I can do next with the RTG and all you were talking about. I literally just spent more time in Workbench than I have since 1993 (lol) and I learned. I learned that I need some kind of patch for my Workbench 3.1 for larger drives and I learned how to setup a Pi 3A+ to do what you showed but I can't find the next steps. I did look through your videos (not all and I'm burnt out so I may have just missed it) but I can't find things like how I set the CPU speed for compatibility or the RTG as I mentioned. Can you please link me Good Sir? Merry Christmas!

@ChrisEdwardsRestoration Год назад

Cpu speeds and things are in its config where you set the rom name. Rtg is a driver you download the zip from the emu68 Github and it had the graphics drivers for rtg. You will beed picasso96 from aminet to setup rtg w their driver.

@Snowcrash777 Год назад

@@ChrisEdwardsRestoration Thank you kindly Doc!

@raefamiga 2 года назад

So coool thx crhis

@terrysweet1160 8 месяцев назад

Hi Chris thanks for your video emu 68 and caffeine is brilliant is there any way you can mount a usb stick in caffeine os ? Any news on getting the Wi-Fi working is there a way around this ? A video would be good to go through what different programs mean and do in caffeine os Thanks Chris

@ChrisEdwardsRestoration 8 месяцев назад

I personally do not use caffeine as i hate opus Magellan. Pedro cotter makes caffeine os as a offshoot of the Apollo vampire os

@bennykanz1a466 2 года назад

Whats about the game compatability? May you test some? Are there the same slowdowns?

@ChrisEdwardsRestoration 2 года назад

Ill get into that in the next advanced emu68 video this was just a basics

@dean8553 2 года назад

This is awesome! Any update on how well the classic Amiga games run iin whdload? Apologies if I have missed that vid. I don't think I did, but I may have with my blind eyes. 😁

@ChrisEdwardsRestoration 2 года назад

Everything seems to run just fine!

@WerdnEnip Год назад

Hi Chris, love watching your videos so much so it made me get my A500 (which was gifted to me a couple of yeares ago) up and running. Managed to get pistorm & gotek. Following your above video, I have an issue where when I come to use HDtools to partion the sdcard, I can't seem to create more than one partition. If I try to create more the gui just shows multiple of the one I have created. What am I doing wrong? TIA Andy & hap new years!

@ChrisEdwardsRestoration Год назад

When you first carve out the disk delete them all. Make sys like 3gb then click the free space and make a new one. Depending on what rom your using is your limit of space/size

@WerdnEnip Год назад

@@ChrisEdwardsRestoration thanks, will give it another try. Is this the rom in the actual Amiga or the one specified in the emu86 config file

@ChrisEdwardsRestoration Год назад

@@WerdnEnip config file

@bamdadkhan 2 года назад

on a different note, i hope the pimiga will be coming out for classic macs too.. my iici would certainly appreciate it

@ChrisEdwardsRestoration 2 года назад

What? Pimiga for mac? You mean pistorm???

@bamdadkhan 2 года назад

@@ChrisEdwardsRestoration apparently i'm an idiot again. of course i meant pistorm lol

@bamdadkhan 2 года назад

'On computer: TURD2' - i see you are also a man of culture : ) but seriously, i have a ton of folders and drives named just like that xd

@ChrisEdwardsRestoration 2 года назад

Lol i also have a large powermac named “BigMac”. And littlemac. His small friend

@ericjohnson6105 Год назад

With ungodly memory above that of a normal A2000 (that is 2M chip and 8M fast) - is there a "sweet spot" to alter the addbuffers for things like hard drives and the floppy drive?

@ChrisEdwardsRestoration Год назад

With that little bit of ram i would leave it as is. With 128mb i use 300 buffers per drive. Floppy never touch as its slow regardless

@pawel23467 6 месяцев назад

What did you do at 8:05 ,how did you jump Frome emu68 screen to amiga kickstart screen because my amiga get stuck at emu68 screen,did you push some buttons

@ChrisEdwardsRestoration 6 месяцев назад

hdmi splitter button to swap between the rgb out converted via my scandoubler "chinesium" box that takes the amigas native rgb . converts it to SCART, then that little box shoots it via hdmi to the dell monitor.(its sitting near the right speaker) . so the emu68 screen is rtg screen or pi hdmi, the button i pushed was putting the video back to the amigas RGB port, hence the kickstart screen by default amiga is always on rgb. hdmi is only after you build your image and install picasso96 and setup the rtg. i said it was RTG around the 7 min mark

@Berend70 2 года назад

Thx for this nice video. Could you show in a next video how to install WHDL ans get games running on such a system?

@a066298 2 года назад

Definitly, that would be soooooooooooooo helpful !!!!

@ChrisEdwardsRestoration 2 года назад

Sounds like a plan. Plus rtg!

@bobs.9375 2 года назад

+1 for this. I'm very new to Amiga and PiStorm, and would love a good setup video for whdl.

@mrnother 2 года назад

Great idea!!!!

@michealgoudman8899 Год назад

Chris how do you get Amiga Caffeine OS 840 installed on a CF card so I can use it on my Pistrom A2000

@ChrisEdwardsRestoration Год назад

Its a image that i wrote w rpi imager. But i am Not the maintainer of caffeine just a user like everyone else

@ericjohnson6105 Месяц назад

When used in an Amiga 2000, is anything in the Zorro slots usable?

@ChrisEdwardsRestoration Месяц назад

Certain non dma cards as the pistorm does not support dma

@BalduinOrgMusic 2 года назад

Is there are similar way to boot from a custom hdf image like on the Pistorm?

@ChrisEdwardsRestoration 2 года назад

the partitions are raw native amiga type 76. you could build the image in winuae AFTER you carved out the partitions and then boot it.

@michealgoudman8899 Год назад

I know that it's a image but what program did you use to write the image to a card..

@ChrisEdwardsRestoration Год назад

Rpi imager www.raspberrypi.com/software/operating-systems/

@timcorcoran4168 Год назад

So being inspired, I purchased my new Amiga 1000, pistorm, pi, etc. I've gotten the CaffeineOS image downloaded and burned, I've copied the ROMs to the SD Card (and point to one in the config.txt file) and I see the emu68 screen on the pi HDMI but the Amiga does not boot. Can someone point out what I am missing? Thanks Chris! You keep some wonderful technology alive... UPDATE: I've also followed Chris' other videos and installed from the pi OS lite and compiled the emulator and flashed the controller (with updated instructions over at github). Still no joy.

@ChrisEdwardsRestoration Год назад

caffeine is rtg only it should boot right up, idk about on the 1000 with its 512k chipram, but i use emu68 as a base emulator, and made my own type 76 partitions and installed wb on them, as shown. you should get a kickstart screen on standard rgb if your rom is configured correctly, then take it from there.

@timcorcoran4168 Год назад

@@ChrisEdwardsRestoration thanks for the input. I’m waiting on my 3 A+ so I pulled a pi gpio expansion board to allow a 3 B+ to test. I think the expansion board is bad $@#! Now I wait…

@Nobe_Oddy 2 года назад

Now I just have to find me an amiga LOL .... too bad I can't use my Pi4 (well, it's a CM4 but same thing) and I'm currently using my Pi zero to auto jailbreak my PS4 everytime I turn it on... dang chip shortage... but at least now I know the new system I wanna learn and tinker with... the amiga emulators for windows are fine, but I want it in my hands THANK YOU! :D

@jarekw.7349 Год назад

Unfortunately I'm not able to run my A500 with Emu68 microSD card inside my PiStorm. When I switch to old one (with old Musashi setup) - it works. Is Emu68 compatible with all pistorms and all raspberries (I have 3A+ version)? Tested with mapped and onboard kickstart. What I'm doing wrong?

@ChrisEdwardsRestoration Год назад

Download pedo cotters caffeine os. Its ore setup for you

@andrewenglish3810 2 года назад

Chris from what Michael tells me the sound (14bit) goes out through the Amiga, not the HDMI. :) PS. make sure you run the Nightly Emu68 not the master copy.

@ChrisEdwardsRestoration 2 года назад

Thanks!

@MrLazenby007 Год назад

What is the highest sound quality file that an A500 running emu68 can playback?

@patrickgomes15 8 месяцев назад

Nightly Emu68??

@michealgoudman8899 11 месяцев назад

Hi, I have the EMU68 image but how do I get games like amiquake, amiduke ect copied using the USB port on my raspberrypi, and extra partitions since I have a 128gb card (Which I expanded)..

@ChrisEdwardsRestoration 11 месяцев назад

EMU68 is a kernel image, download the Caffeine OS image i have linked in the desc.

@Voyager_2 2 года назад

To be a little more clear about bare metal. The mushashi emulator runs on a linux distro and is interpreter based. The emu68 emulator is JIT based (Just In Time) The emu68 emulator is written to run directly on the raspberry pi there is no there is no underlaying OS like linux, this is was we call bare metal.

@ChrisEdwardsRestoration 2 года назад

Yyp

@davidste60 2 года назад

True, the JIT compilation to ARM machine code is the important difference imo. With linux you can get around interruptions by locking a program to a core or using xenomai etc. But interpreters will always be slow compared with JIT compilers.

@agimmujushi9782 Год назад

i'm using the minimig 1.8, with the pi storm and raspberry pi 3a+, but can only see the emu68 logo and when i switch to the minimig theres nothing on screen, have tried roms 3.0 through to 3.1.4, both amiga 600 and 1200 roms, any help would be greatly appreciated. have since purcased another pi storm and a raspberry pi, to no avail. kind regards

@ChrisEdwardsRestoration Год назад

did you use the hd files on the minimig card? or carve out hard drives on the type76 partition of emu68? you need to use the bootloader with the minimig, which apparently is working if you can see the emu68logo on hdmi of the pi. remember to select the hard drives on the minimig, then save the config, and it should boot, do not call a rom or anything from the pi, leave its config virtually blank and stock. get it working then modify it later.

@rafaelmmartinez9170 5 месяцев назад

I have an issue, don't know if you can guide me. I have in my board rom 1.3.4. I have downloaded last emu68 version for the rasp 3A+. Saved the rom file in the sd under kick.rom and make sure the code is in the config. When I turn on the amiga I get a black screen. If I disable the rom option in the config file the amiga boots. Don't know what I'm doing wrong.

@ChrisEdwardsRestoration 5 месяцев назад

There’s no accelerator support in 1.3. Use 3.1 or better

@HollaDieWaldfee1 Год назад

Very good Video. Iam now at the point with the HDD. So i have a little problem: If i will initilize the Harddrive in HD Toolbox the System shows me a Minus Size. (Size - 1474560k -- - 1440MB). I have WB 3.1 and KS 3.1 not 3.1.4 is that the problem??

@ChrisEdwardsRestoration Год назад

yes thats the problem, 3.1 will not address larger hard disks, you should always keep sys: aka dh0: sub 4gb you can then do pfs3 later to initialize the larger ones

@HollaDieWaldfee1 Год назад

@@ChrisEdwardsRestoration Thanks Chris. Big Up man!! Problem solved😁😁

@SelfIndulgentGamer 2 года назад

id=76...........Mind blown!!

@rickcardoso9904 3 месяца назад

Hi Chris, I copied an image with caffeine os completely preconfigured for the Pistorm lite 32 raspberry Pi 3+a and I would like to be able to use it on my amiga 1200. The monitor I have is the Amiga 1084 S, because it is RGB, when I boot it I only hear the sound and the screen is black. Through Winuae I can access it without any problem. Is there any configuration I can do through Winuae so that I can use the SD card with RGB output resolution? Thank you very much

@ChrisEdwardsRestoration 3 месяца назад

remember caffeine is rtg , only 15khz stuff goes out the amiga side and sound...

@rickcardoso9904 3 месяца назад

@@ChrisEdwardsRestoration Thank you very much for the info !

@andrewenglish3810 2 года назад

It should format without issue in 3.2.1 :)

@terrysweet1160 Месяц назад

Hi Chris can you make a video of installing the Wi-Fi driver for the pi 3 on Emu68 caffeine os So the Amiga is now Wi-Fi enabled

@ChrisEdwardsRestoration Месяц назад

When it gets out of alpha sure

@terrysweet1160 Месяц назад

@@ChrisEdwardsRestoration thanks Chris your one in a million

@mikedavidson1142 2 года назад

how do you transfer files onto it do you have ssh enabled on this

@ChrisEdwardsRestoration 2 года назад

you can either cheat and download caffeine os from pedro cotter, or insert this card after carving out the partitions into winuae and drag drop stuff. BUT networking is coming to emu68, so once that does it will be much easier,

@claudiobraccia103 Год назад

Tried as well with DISKPART as Admin, no succes?

@ChrisEdwardsRestoration Год назад

then you were not admin

@brufnus Год назад

Actually it's Musashi, not Mushashi. Good video, by the way!

@ChrisEdwardsRestoration Год назад

potato potatoe. lol

@pawel23467 3 месяца назад

Hi just install caffeine os with emu68 and problem is it is Stack on emu68 screen any Ideas

@ChrisEdwardsRestoration 3 месяца назад

Apparently you did not write the caffeine image properly

@karlmillar295 2 месяца назад

I had the same problem, I reseated both the Pi and the Pistorm32 and also my new 3.2.2 roms, its worked since without issue. My only question for Chris would be can I set up my temperature sensor currently connected to my clock port in Caffeine

@daveboogie1 2 года назад

does this work with a A500+?

@ChrisEdwardsRestoration 2 года назад

1000,500,500+,2000,2500. Anything w a long 68000. Heck i think theres an adaptor for even the a600

@davidwright9166 2 года назад

Is there any way to install 3.2 on this on the pc side with winuae. No gotek that works or install floppies.

@ChrisEdwardsRestoration 2 года назад

yes, just mount the sd card in winuae AFTER you carved out the partitions, run winuae as administrator, and add the hard drives as rdb, ignore what windows says.

@davidwright9166 2 года назад

@@ChrisEdwardsRestoration no rdb options available. It also only sees one drive instead of the two (250mb, and 28gb) i set up

@ChrisEdwardsRestoration 2 года назад

Make sure your on a newer large hd supported Rom and add the disk. It will mount the inside partitions

@davidwright9166 2 года назад

@@ChrisEdwardsRestoration screen shot posted to you in messaging on Discord

@davidwright9166 2 года назад

Saw it and appreciate the time you took. This is another no go for me lately. Do all the things just as shown, try different cards, different computers and every option available and hd tool box sees nothing. Honestly, I would rather buy and image.Thanks Chris, sometimes you got to call it. Back to Igor and my crippled or fried Vampire V2. It's been a rough week in amiga land.

@plumbc007 Год назад

quick question proper noob here lol,, i followed youre awkard guide so 2 speak , and my question is how can i put files in the sd card from my pc in the 2nd partion hdd, windows see it only throgh disk manager and it not assigned a drive letter....thanks

@ChrisEdwardsRestoration Год назад

thats not how it works, you dont allow windows to touch anything or it destroys it. different platform, launch winuae as administrator and add the hard drive files there. i did a video on mounting hdf files and hard drives on my chan a while back

@mauricedoerr1992 Год назад

I can't create a profile larger than 640,480

@agent_pl7558 Год назад

possible emulated AGA?

@ChrisEdwardsRestoration Год назад

@davidwright9166 11 месяцев назад

Trying a new emu68 build. Formatted all etc. copied appropriate rom file to boot and renamed to kick.rom. Nothing registers and no insert disk prompt. Winuae or actual amiga.

@ChrisEdwardsRestoration 11 месяцев назад

I did not know emu68 ran on winuae?? Roll back to what was working

@drusso66 2 года назад

Been trying this over and over, but cannot even get the Kickstart sceen, copied 3.1.4 also 3.2.1 even 3.1 but just blank screen, have renamed them as per config.txt which on the latest version is kick321.rom. But if i delete the kick rom and then boot off the sd card my Amiga will boot to the physical rom that is installed on my A500+ which is Kick Rom 2.0.

@ChrisEdwardsRestoration 2 года назад

Look at your config file to see what it should be named… this thing is updated all the time

@drusso66 2 года назад

@@ChrisEdwardsRestoration Thanks for reply Chris, finally got it sorted, for some reason the CMDline txt files was missing so I copied one from a working Caffeine OS image and it all boots up fine now.

@leighsanders2045 Месяц назад

@@drusso66 Could you list that these lines are and where they need to go please? I'm having exactly the same issue.

@jimbonobodycares10 Год назад

Why buffers only 300?

@ChrisEdwardsRestoration Год назад

Ide is only so fast

@mikedavidson1142 2 года назад

i dont get the kickstart screen just a black screen

@drusso66 2 года назад

Same here, tried different kickstarts from, 1.3 all the way to 3.2 and just get a black screen via the amiga RGB, but i can see the emu68 logo when i switch to RTG mode. Also when i delete the kick start from the sd card then try it it boots up as normal to kick 2.0 which is my physically installed rom in the A500+. Have you had any luck yet?

@mauricedoerr1992 Год назад

NICE ! But unable to transfert file from/to PC. NEED networking !

@ChrisEdwardsRestoration Год назад

why? the virtual drives are a hard drive image, mount it in winuae and drag stuff over

@mauricedoerr1992 Год назад

@@ChrisEdwardsRestoration That's what I did, it works. But it would be more interesting to be able to do live transfers without stopping the Amiga and having to do all the card handling. This is what I do on Vampire and it is very convenient to transfer files via the network.

@plumbc007 Год назад

@@ChrisEdwardsRestoration how do you mount the image in winuae????

@ChrisEdwardsRestoration Год назад

plop the card files into winuae and mount it like any other hdf you need to launch it in administrator mode right click run as admininstrator first

@mauricedoerr1992 Год назад

@@ChrisEdwardsRestoration i have made a fat32 partition, easyer for transfer files. :) no need to run winuae

@pawel23467 6 месяцев назад

Any one knows why my amiga stay only emu68 screen and not go to amiga screen ,it should automatically go to amiga screen and it not happening

@ChrisEdwardsRestoration 6 месяцев назад

no it does not, the emu68 is the hdmi RTG portion of the amiga, unless your running caffeine or something pre setup for rtg only the native amiga RGB video is theoutput. and it will not be active until you configure Picasso96 for RTG. i stated this in the video in great detail. i have mine on a db23 to scart switch that outputs hdmi so i can toggle on a simple hdmi switchbox between the two formats.

@pawel23467 6 месяцев назад

@@ChrisEdwardsRestoration I can not get to work my amiga 600 with pistorm it is missing files strings etc this Linux nonsense I thought emu68 is the easy way to do it but it is basically another useless program to me but thx anyway

@CartoonMonkeyStudio Год назад

Hey Chris, I noticed Shapeshifter is far slower than this vid: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YNryF3T3AwE.html Any reason with the Pistorm32? The Pi used? 3b vs...?

@ChrisEdwardsRestoration Год назад

this user has a 3A, i am running the more powerful 3b+, i have also tried it with the 3A with similar results. the pimiga os variant on the pi400 runs it at almost stock Mac 040 speeds. weird. could be me but who knows.

@jediknight2350 2 года назад

i still dont understand do i still need a pimiga?

@wmerritt72 2 года назад

Where is the link to caffineOS Image?

@ChrisEdwardsRestoration 2 года назад

Pistorm fb groups.

@jediknight2350 2 года назад

@@drphilxr i see so i get a pistorm then stick it on , i havent got one yet but im going to buy one seems fast.

@ChrisEdwardsRestoration 2 года назад

This is a jit cpu replacement for a real 68000 amiga

@JarppaGuru Год назад

5:26 what diff is pistorm and raspi. with amiga and pistorm and without amiga and pistrom just raspberrypi? kinda like amibian hihi xD

@BerndFelsche 2 года назад

Don't mention the Emu wars.

@JarppaGuru Год назад

14:59 yes same amiga but it use raspberry pi and use amiga keyboard and mouse. why we need amiga. we can just raspberrypi again xD lets build saame thing without use real hardware if that not amibian then take emu68 and replace all amiga read part to usb on pi lol

@gilbertocolten1789 2 года назад

??????? ?

@stephanemignot100 2 года назад

Nobody cares but I want a Mac version for my LC III.

@ChrisEdwardsRestoration 2 года назад

I have a lc575 but its the 030

@stephanemignot100 2 года назад

@@ChrisEdwardsRestoration me too but way slower I think.

@brostenen 2 года назад

There are someone working on a Mac version of the PiStorm hardware. At least a couple of videoes on RU-vid as well. I believe the PiStorm discord server have an mac-area as well. But I have not been on Discord the last couple of months or so, and these things devellop fast these days.

@stephanemignot100 2 года назад

@@brostenen I watched a couple of these few months ago, we'll see. PiMiga keeps me busy anyway!

@brostenen 2 года назад

@@stephanemignot100 Then there are actually no reason to complain, saying that there are nobody working on PiStorm-Mac, when there in reality is at least one person doing this. Sure it is being develloped slower, but it is something that someone is working on.

@JarppaGuru Год назад

16:44 its look same silly as magicwb. i like latest 3.2 grey LOL why we want old magicwb colorfull thing when we can latest good old grey xD well lets change it dark mode xD