An introduction to the D7 scan tool with Bi-directional control for under $500

Подписаться 6 тыс.

Просмотров 11 тыс.

50% 1

CORRECTION: The tool does have a graphing capability in the "Live Data" area. I failed to find that option.
Also, check to see which system version you have. It should be: V4.23.3_5.92 (Setting-About), if not, reboot the scanner for an update.
Our engineers will keep publishing new system update and software regularly. Software and system updates will fix known bugs and optimize the operation of the system.
We suggest all our customers get the newest system OS and available software to get the best experience.
Timeline:
Start: Introduction
2:01 What I don't like
3:18 Display and capabilities on a (2005 Corvette)
3:59 Bi-directional control (2005 Corvette)
6:27 Live data display (2005 Corvette)
9:54 Examples of activation tests (2018 Ford Escape)
10.50 Live data (2018 Ford Escape)
13:14 Compare the Autel MK808 (2018 Ford Escape)
15:26 Autel MK808 graph mode display (2018 Ford Escape)
16:20 My recommendations
Link to the tool and a 10% discount at check out:
www.amazon.com/XTOOL-Automoti...
Type in this code: Wyattcode
Description from the Amazon page:
💪 【2022 NEWEST ALL-IN-ONE SERVICE TOOL】XTOOL D7 automotive diagnostic scanner performs extensive services & special functions like Active Tests, Oil Reset, EPB, SAS, DPF, BMS, Throttle, Air Suspension, Injector Coding, IMMO Key Programming, ABS Auto Bleed, transmission Reset, throttle adaptation, Refresh hidden functions and etc. NOTE: All Special functions do NOT work on all cars. Send VIN number to Xtooldirect @ outlook. com to check compatibility before purchase!
💪 【BI-DIRECTIONAL CONTROL】 XTOOL D7 possess the ability to send commands to components to test the working status, without using the vehicle controls. It can read/erase codes, view live data, freeze frame, retrieve ECU info, do active test for all components like Fuel Trim Reset, Fuel Composition Reset, fuel pump, valves, wipers, window, door, sunroof, headlamps, etc. Helping mechanics/technicians to quickly locate the bad parts on the cars.
💪【OE-LEVEL ALL SYSTEMS DIAGNOSTIC + LIVE DATA + AUTO VIN SCAN】Configurating the latest VIN-based Auto VIN & Auto Scan, D7 professional scan tool can easily access and diagnose all available modules on a wide range of vehicles, including PCM, ECM, EPS, PDM, TPM, BCM, TPMS, SAS, Fuel System, Light System and A/C system, etc to read and clear codes, view live data like transmission fluid temperature, cylinder balance rates, engine rpm, etc, freeze frame, perform active tests, read ECU info.
💪【COMPLETE MAINTENANCE FUNCTIONS MEET YOUR NEEDS】 XTOOL D7 car diagnostic scanner comes with 28+ service functions including: Oil Reset, EPB Reset, SAS Calibration, DPF Regeneration, TPMS Reset, ABS Auto Bleed, Battery Registration, Throttle Reset, Injector Coding, Power Balance, IMMO Key Coding, Suspension Calibration, Transmisson Adaptation, Headlamps etc. NOTE: Please send VIN number to Xtooldirect @ outlook. com to check compatibility before order.
💪【COST-EFFECTIVE KEY PROGRAMMING】XTOOL D7 car key programming tool can perform various IMMO functions like programming new fob key, make dealer key, Add extra new key, Remote learning, Key matcing/learning, smart key reading for specific vehicles. Note: This function vary across vehicles. CAN NOT work for VW/BMW/BENZ or for Toyota smart key All key losst. Please confirm with us compatibility first with your car VIN.
💪【3 YEARS FREE UPDATE + 2 YEARS WARRANTY + 14 LANGUAGES】Featuring with 36 Months Free software updates, 2 Years Warranty, 30 Days REPLACEMENT or FULL REFUND services and 14+ Free language menus. The default language of D7 scanner is English, please contact Xtooldirect @ outlook. com to get fastest tech support with your S/N if you need Spanish menu or other languages.
💪 【COMPREHENSIVE DIAGNOSIS MASTER】Best Choice for Technician, advance DIYers, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, professional mechanic, retired mechanic, weekend DIY, individual. Need any help? Please contact via Xtooldirect @ outlook. com to get fast answer.

Развлечения

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@ScoutCrafter 2 года назад

It's mind boggling how much computer information is available in modern cars... Thanks Wyatt!

@wyattoneable 2 года назад

It's getting out of control for anyone to keep up with the technology that is in these cars. I like the old stuff, like me, it's simple.

@TheDisgruntledMechanic 2 года назад

Great review Wyatt! If I didn't have 6 scan tools already I would buy one! Hope all is well!

@wyattoneable 2 года назад

I hear that. I've sold a lot of my smaller, less capable scanners but I still have that Autel you sold me. Love that tool for the older vehicles like my 94 rollback with the 96 engine and ECU. In fact, it's the only scanner that will work on that truck.

@RustyGlovebox 2 года назад

Very impressive tool and all that for under $500 is hard to beat. Thanks for sharing the info on the D7 scan tool.

@wyattoneable 2 года назад

I get asked to do tool reviews from sponsors on occasion and for the most part I don't do them. But this tool brings a lot to the DIY guy who wants to learn more about how to diagnosis a vehicle with some added options so I said "yes" to the review. I'm always glad to see you here Lloyd.

@cmemyselfandi8952 2 года назад

Very informative video. Great job on the comparisons. Thanks Wyatt!

@wyattoneable 2 года назад

If you ever need to scan your vehicles I have many scanners to chose from. :) I'll have part 3 of the Harley videos coming out soon.

@towerjokey 2 года назад

Thank you for this video!! I like seeing the new tech. I have an Autel now and was thinking of doing an up grade at some point.

@wyattoneable 2 года назад

I'm glad it helped. I like my Autel scanners. But this one is a little cheaper with good options and the three years of updates sold me.

@OneAuto 2 года назад

A great tool for the price Wyatt! There are some great tools about right now. Glad to see you on the mend buddy!

@wyattoneable 2 года назад

And if that's not enough I will soon have the D8 with blue tooth to confuse everyone! Thanks for hanging out in the shop Rob.

@patrickcayton3072 2 года назад

Great to see you back on RU-vid. Hopefully you're finally back to normal and on the mend.

@wyattoneable 2 года назад

I appreciate that Patrick. I'm doing pretty good now. I'm happy you stopped by.

@patrickcayton3072 2 года назад

@@wyattoneable No problem. You've been one of the few RU-vidrs that acknowledge their fans and I appreciate it. Glad you're doing well.

@wyattoneable 2 года назад

@@patrickcayton3072 Oh yeah, I enjoy our interaction.

@patrickcayton3072 2 года назад

@@wyattoneable Thank you. You're an inspiration to us slightly younger dyer's. Still wrenching! 👍

@reality150tv 2 года назад

Good video wyatt, thx for sharing ur thoughts on this scantool, I been checking out different videos before pulling the trigger to be as informed as i can before buying it.

@wyattoneable 2 года назад

That's all we can do right? There are so many choices out there that it can be confusing. I appreciate the comment.

@404notfound..... 2 года назад

Fantastic video!! Just the information I need. Have a couple of autel units, but for this price with bi directional control, il take it.

@wyattoneable 2 года назад

I love your channel name. Thank you for leaving a comment.

@ozzstars_cars 2 года назад

Looks like that D7 scanner could help get some work done. I recently started playing with the Xtool EZ400pro, pretty good so far. I have the D8 coming soon. It does what your D7 can do but it can also be used to program modules. Nice review Wyatt!

@wyattoneable 2 года назад

I think this tool has some pretty good options for the money. Yes, the D8 has been offered to me as well to compare it against my Autel 906. I'm debating that right now. I'll be looking for your video. I like learning about new technology.

@ozzstars_cars 2 года назад

@wyattoneable I believe the D8 is comparable to the MS908P, they both have programming capabilities which I'm sure you know the 906 doesn't have. Guess we'll find out. 😁👍

@theadventuresofjavier8698 2 года назад

Looks like a winner sir. Thanks for the review

@wyattoneable 2 года назад

I missed a few features with this tool like it dos have a graphing mode but in another area. I try to keep these videos fairly short but by doing that people miss some of the functions. It's always a balancing act.

@wyomikey65 2 года назад

Good video! I'm in the market and the Xtool D7 is in the front running.

@wyattoneable 2 года назад

Hi Mike. It's hard to make a choice because there are so many scan tools out there. I own a few myself and while no single scan tool can do it all, this one has some good capabilities. I appreciate the comment and good luck!

@SmittySmithsonite 2 года назад

Pretty good bang-for-buck ratio here I think. Cheapest bi-directional tool I've seen so far (although I haven't looked in a long time). Nice!

@wyattoneable 2 года назад

See? Here we go again. I didn't get any notifications that you were here. That's aggravating. But yes, this seems to be a good tool for DIY guys who want to learn how to use it, and not a bad tool for professional shops as well.

@SmittySmithsonite 2 года назад

@@wyattoneable Yeah, par for the course lately with RU-vid. I’ve been missing a ton of videos from everybody lately. My phone doesn’t make any noise when alerts come in, or text messages for that matter. Guess that’s Apple‘s way of forcing you into a new $1,000 phone every two years. I wish RU-vid would have stuck with email notifications. I never missed a single video when they had that. Funny thing is, I still get email notifications for comments, but sometimes I won’t. Good thing our lives don’t depend on notifications, lol! 😁

@V8AmericanMuscleCar 2 года назад

These controls (windows, horn etc.) are cool! 🙂 I hope you will shot a video of this Corvette (driving, etc). 😁

@wyattoneable 2 года назад

That's a good idea. I should do a Corvette video someday. Currently is is snowing and cold so I will wait until Spring and a sunny day. I have some footage of our Corvette club driving, maybe I send that to RU-vid. :)

@WallysPlace66 2 года назад

That is a nice scanner. Thanks for the review.

@wyattoneable 2 года назад

Thanks Wally.

@SurviveN2 2 года назад

Thanks for the info Wyatt 😉 Sounds like you get a lot of bang for the buck with this tool 👍

@wyattoneable 2 года назад

Thank you Ray. It has a lot of options!

@sethhargrove5940 Год назад

Very helpful. Thank you

@wyattoneable Год назад

There are a lot of choices out there. I appreciate the comment.

@sixtyfiveford 2 года назад

Tons of possibilities with one of these.

@wyattoneable 2 года назад

If your interested in diagnostics, you have to have some kind of scanner. This one has some bi-directional control which adds a lot of functions for the price. There are so many choices out there that it makes it hard to chose and understand which is best.

@RodderFiles 2 года назад

I like that. Should brrr an interesting project

@wyattoneable 2 года назад

It's difficult to keep up with technology. No sooner than I did this introduction, the D8 scan tool is out and running. Man, how are we to decide? Thanks for your time here Kenny.

@VegasDtech 2 года назад

I believe there is an update that will allow you to switch the view from meter to graph.. I personally dont like the meter and prefer the graph data as it shows movement over " time" as meters only show where its at " at the moment" - great machine for the price and 3 years of free updates is a no brainer. Thanks for your video Sir -

@wyattoneable 2 года назад

Yes, I think you are correct. I mentioned that in the discretion box. As you mentioned, having three years of updates is a huge "plus" for this tool. I appreciate your comment.

@chipsawdust5816 Год назад

I saw a more recent video and it's all linear graphs, you can overlay up to four different values on it.

@kimchee94112 Год назад

I have the D7, playing with it but no idea what I'm doing. Baby steps learning little by little. My first scanner was over $100 but it only reads and reset trouble codes. $100 now those scanners do so much, much more.

@wyattoneable Год назад

It's a big learning curve for sure.

@matthewsalomone3800 Год назад

My D7 will arrive today :)

@wyattoneable Год назад

Oh man that's cool. I hope you find lots of use for it. I've enjoyed learning about this tool.

@christinamcdowell30 2 года назад

Great review!

@wyattoneable 2 года назад

Thanks!

@mrbustos4277 2 года назад

I did my research and after watching this video I bought the Xtool D7. It came in the mail Friday, 3/12/22, and I played with it on the weekend. I worked on My 2003 Volvo S40, which had the check engine light on. I was able to make the windshile go on and off and it read some other stuff. The D7 has a lot of options and I was wondering if you would put up a RU-vid video with simple steps to check things like fuel trim and see the graphs. I am a beginner, (level 1) but I can follow directions well.

@wyattoneable 2 года назад

I appreciate your comment and I'm happy to hear the D7 has worked for you. I too am a beginner. While I have multiple scan tools, I really don't get a chance to use them much as I am a DIY guy who works on his own vehicles. In any case, if I have a need to use the D7 in a future project I will certainly make a video. It is also possible that I may make a video to explain more features about the tool as one video can not show everything. I have other projects that need my attention and making additional videos will be difficult. I will make a video as soon as I can. Thank you for your interest.

@mischef18 2 года назад

And here's me thinking a D7 was a bulldozer, even in my later years it shows I'm not too old to learn something. All well above my head bro but enjoyed this video anyway. Safe travels

@wyattoneable 2 года назад

You'll be more confused when I get my hands on the D8! (ha ha)

@joeo1352 2 года назад

Thanks for sharing 👍

@wyattoneable 2 года назад

Thank you Joe. I appreciate the feedback.

@atomicdmt8763 Год назад

mine is coming today! D7

@wyattoneable Год назад

I hope it works well for you. Mine has been handy for sure.

@Iam1uglyguy 2 года назад

Cool tool.

@wyattoneable 2 года назад

You forgot to say "First". (ha ha) Thanks for being here.

@Iam1uglyguy 2 года назад

@@wyattoneable I am always number one, all the other drivers on the road tell me everyday using hand gestures!

@wyattoneable 2 года назад

@@Iam1uglyguy LOL

@papasplace2 2 года назад

Looks like one very capable tool for a good price. Now bring on the Harley! LOL

@wyattoneable 2 года назад

Yes sir, the part three of the Harley videos is ready. I just have to get with Jason and get this thing delivered so I can make part four not too far behind part three.

@diymisfit_Mechanic_UDX404 2 года назад

Definitely priced to move. The only thing that turns me off, is that ungraphed graphing 😆

@wyattoneable 2 года назад

I have learned that there is a graphing mode in another area of the tool. I failed to recognize that so I'll have to add that in the description block. My bad.

@RunsWithKnives 2 года назад

Looks like a good tool, I just bought another Ford so I shouldn't need it :)

@wyattoneable 2 года назад

Your other Ford wasn't that old. It should have latest longer than that. (ha ha) You know I love you brother. I hope all is well with you and the girls.

@RunsWithKnives 2 года назад

@@wyattoneable Warranty was almost up and I wanted to get another one before interest rates go up further.

@wyattoneable 2 года назад

@@RunsWithKnives Good plan. I bought one new car before I retired so I could have something reliable. So far it's been a good car.

@billziegmond4943 2 года назад

Thanks for the info Wyatt. Now do I want to buy anther scan tool.

@wyattoneable 2 года назад

Thank you for your time spent here Bill. Naw, you probably have enough scan tools.

@randalllyons8467 Год назад

Mine won’t communicate with my f150 and I do have power and both grounds in the Indian port.

@themechanic6117 2 года назад

Nice tool for its price.

@wyattoneable 2 года назад

It's a good option for many reasons. Thanks for the comment.

@josesantiago1123 2 года назад

Oye mi hermano me gustaría saber si funciona con los misfire

@TheMrBennito Год назад

What I still don't get: live data, it throws a zillion data & numbers, yet how to know if a number falls within standard limits for my particular car? The numbers don't turn red if they fall out of acceptable range, or something like that.

@wyattoneable Год назад

Scan tools requires a pretty steep learning curve. You'll have to find service information or the parameters that your computer is looking for in order to understand what data is within the specified parameters. I know it's frustrating but every scan tool is different so that's why the professionals have multiple scan tools. If your a DIY guy like me that can be expensive. I wish I could help further. Google might even be help to you to find the parameters your looking for.

@calholli 2 года назад

The D8 has both gauge and graph-- as you prefer.

@wyattoneable 2 года назад

Yes indeed. I should have a D8 in about a month to check it out also.

@Longtrailside 2 года назад

Hello Wyatt, sorry but i had to skim through since i alread have the 906 bt, but if i didn't have that id be buying that scanner.

@wyattoneable 2 года назад

I love my 906. This company has a D*, which has many similar capabilities as the 906, for about half the price. I might be getting that for a review also. But your set with the 906. Skim though is perfectly fine, I'm just glad you made a comment so we can stay in touch.

@Longtrailside 2 года назад

@@wyattoneable Btw hows the new knee going? Is it still really stiff or is it finally starting to loosen up to where it doesnt hurt so much.

@wyattoneable 2 года назад

@@Longtrailside The doctor is happy with the healing process but it's still swollen and hurts to go down stairs. Otherwise I'm getting around pretty good. Thanks for asking.