Antikythera Fragment #8 - Ancient Tool

Подписаться 659 тыс.

Просмотров 637 тыс.

50% 1

Antikythera Fragment #8 - #AncientTool Technology - Layout Line Visibility, by Clickspring.
Wine, wax, woad and yes, There Will Be Blood... all in an effort to discover the best ancient marking fluid. And I'll let you decide how the blood supply issue might have been dealt with in the ancient shop - I'm guessing it might not have been much fun being the apprentice on the day the large dial was marked out!
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: / clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Peter John Richardson
James Kuhn
Niels Palmann
Steven R. Crider
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Andre van Soest
Larry Pardi
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Tim Bray
________________________________________________________
------------- Video Notes: --------------
References:
Traditional India Ink: • Brush, ink, paper and ...
Related Videos:
The Antikythera Mechanism Episode 4 - Making And Fitting B2 - • The Antikythera Mechan...
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Dykem blue: amzn.to/2plmLlx
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Books:
Workshop practice Series: amzn.to/2DyPs2D
Machinery's handbook: amzn.to/2pi7XE5
Antikythera Fragment #8 - Layout Line Visibility, by Clickspring.

Развлечения

Опубликовано:

4 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@ThisOldTony 5 лет назад

using your own blood for layout fluid has got to be the toughest thing I've ever seen; stuff of legends! parents will recount this to their children for generations. as always, extraordinary detective skills.

@molitovv 5 лет назад

This Old Tony still thinking about the ringleader in the tub here!

@davelahoud1256 5 лет назад

Funnily enough, I thought of you when he used blood!

@1theheightofparadise 5 лет назад

That is so metal

@StefanGotteswinter 5 лет назад

We used to use apprenticeblood. But HR has frowned uppon that.

@finnsailing69 5 лет назад

TOT i thought you used blood too, i´ve seen you cover some work pieces with your blood.... wait? that wasn´t suppose to happen? ;)

@dsenti 5 лет назад

I for one like to pretend that you just happened to have all these materials laying around your workshop. “Squid ink, hm. Oh right! Next to the woad!”

@trentpierce7656 5 лет назад

I read that in an Adam Savage voice haha

@MultiPureEnergy 5 лет назад

Trent Pierce for some reason I did too, but I didn’t realize until i read your comment

@slypig24 5 лет назад

You do know he has a Time Machine, that's how he gets all his very accurate techniques & layout recipes.

@MrPotatochips4 5 лет назад

I was just taking my first sip of Tea - couldn't quite get it all down.

@livedandletdie 5 лет назад

@slypig24 Those 2 rascals and their time machine, eh?

@ericwebster6911 5 лет назад

And the winner of 2018's most unusual shopping cart goes to...

@Wintergatan 5 лет назад

That Engraving test was so beautiful. Being a test piece made it almost even better somehow. Thanks for this series!!

@Clickspring 5 лет назад

Thank you Martin :)

@1495978707 5 лет назад

Clickspring Yeah that’s a lot of work for just a test

@nullsnaggle5198 3 года назад

Holy snek its martin...gotta say you got me into making mechanisms so thank you

@Clickspring 5 лет назад

Thank you for all of the excellent suggestions folks, it was a blast checking them out - lots more testing to come over the next few videos in the main series as I get stuck into the engraving - Please enjoy :)

@rjk7104 5 лет назад

I love this series. I do wonder if this sidetracking is a little bit excessive in the grand scheme of things - it's not like Dykem would be seen once the project is completely finished.

@AbdulKarim-fs5iw 5 лет назад

Awesome breakdown Chris .. Thanks again..

@aussiebloke609 5 лет назад

@rjk The whole point is to see just how hard it would be to use period techniques and materials. Doing it all with modern machines and materials way would be much easier - and wouldn't be visible either. But that defeats the intent of the exercise.

@Bereft777 5 лет назад

So cool of you to collaborate like that. You are a shiney example, thank you!

@driftonAloft 5 лет назад

I see blood as a very valid option thouhg it probably wasn't human, goat, chicken or pigs blood would of be readily available and thanks for all the videos they are one of the things that has gotten me interested in machining

@HandToolRescue 5 лет назад

14:23 Worst omelette ever...

@edeggermont 5 лет назад

I never enjoyed watching paint dry more! Fascinating, and I just love your dedication

@maxximumb 5 лет назад

It appears at least 6,600 other people, including me, agree with you.

@ZomB1986 5 лет назад

Also try enjoying drying paint under a microscope by Sixty Symbols. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OW5wB8rJ8Zc.html

@mikedrop4421 5 лет назад

Today on Clickspring we're making Dykem. Paging Alec Steele. Mr. Steele your dream video is ready.

@maxximumb 5 лет назад

Blooooooooooooooooooooooooooooooooooooooooo Dykem! (I think that's the right lyrics)

@motopreserve 5 лет назад

If Dykem was available during antiquity, it would have still been on the Antikythera device when found...based on how long it stays on my hands after a project.... :)

@mpetersen6 5 лет назад

Now if it was Prussian Blue* or Prussian Red (which I haven't seen in 50+ years) it would still be there when the Sun expands onto a Red Giant *I once had to do a map for school and my dad had a tube of Prussian Blue in the basement. Oh was I a mess. He also had Prussian Red which he got from his father.

@motopreserve 5 лет назад

@@mpetersen6 Very true. I've only used it a couple times years ago for valve lapping.... looking at it on my fingers now :)

@dustysparks 5 лет назад

"Remember kids, the only difference between screwing around and Science, is writing it all down!" But seriously, you're finding excellent materials for filling in engravings as you mentioned, not just for marking for cutting/drilling. This is awesome, and inspiring!

@DobraEspacial 5 лет назад

I really can't believe I have access to this type of quality content FOR FREE. I'm learning so much with you. THANKS! 😄

@camogrrl 3 года назад

We wrote essays from enclyopedias at the library before the internet. Now there is too much info and you can find any lie you want to believe in on there. University will not accept internet references. You must cite the original reserch. Lol academia knows the internet isn’t a reliable source.

@vladimirpoutine4140 2 года назад

@@camogrrl It seems entirely like you were responding to some other arrangement of words.

@OutOfNamesToChoose 5 лет назад

Holy CARP!!! Tyrian purple is 4,280.00 USD * / 1000 mg at one supplier I found!

@wobblysauce 5 лет назад

Yep... they know their market.

@nurgle11 5 лет назад

Takes a huge amount of Murex snails to make just a small amount ... 8500 snails per gram

@jort93z 3 года назад

@Evi1M4chine I think when you are paying over 1USD per mg, it is not a bad idea to use mg.

@stevenfrance6290 5 лет назад

Oh clickspring, how I've missed you so so much..

@Abom79 5 лет назад

Chris, very impressive tests, and way cool you took into account all of the viewer suggestions. Like Tony, was amazed at the "blood" test! I never would have thought of that.

@Clickspring 5 лет назад

Thank you mate!

@shonaoneill5151 5 лет назад

@@Clickspring My two favourite RU-vidrs.....YAY 😄

@cnclathe21 5 лет назад

Adom we wait a video for the new radial bro!!

@624Dudley 5 лет назад

Chris, I’m amazed that in the short time available, you were able to research and procure a wide range of odd materials, study up on their uses & history, (presumably) practice off-camera, and then produce quality video. Are you being assisted by aliens? This is quality stuff, my cyber friend! Keep up the good work!

@shonaoneill5151 5 лет назад

@@624Dudley Agreed, Chris is extremely thorough, going through all those items to find the most likely and suitable method for the job at hand......impressive.

@MrPotatochips4 5 лет назад

I read about these ancient materials and compounds 40 yrs ago, somewhere, in a book, when learning to work with wood - and there was a partial translation to modern English - now to see them so clearly while in use is just miraculous. 1000 x thanks! Bless your heart! Down votes are obviously from the ever AWOL volunteers.

@me3333 5 лет назад

Chris, you are one of the few people that can actually say you have "Blood, Sweat and Tears" in your work without exaggerating. Love your videos and very much appreciate you sharing such high quality content!

@MiniMartimus 5 лет назад

You are the only RU-vid creator who i have never skipped through a video Honestly your craftsmanship and videos are breathtaking 👍

@iskandertime747 5 лет назад

I love these moments when you try to get in the head of the original maker. It's fascinating to imagine how he overcame the challenges of the build.

@elcheapo5302 5 лет назад

You...hand engraved that entire plate? Just when I think I've seen Chris do it all, he astounds me once again.

@intjonmiller 5 лет назад

That entire *test* plate.

@madnessbydesign1415 5 лет назад

"Come in off the ledge!" "Why?!?" "Well, there's a new Clickspring video!" "... Sweet." :)

@ChuckUnderFire 5 лет назад

This is awesome

@Bereft777 5 лет назад

Amen

@madnessbydesign1415 5 лет назад

What's amazing is not just the quality of his manufacturing skills, but also his skill at visually documenting it and narrating it so clearly. Any one of these things is an art-form in itself, but he nails all three consistently... :)

@JoseSilveira-newhandleforYT 5 лет назад

If at all possible, from what I've seen from you, I was surprised by the quality of the hand engraved letters - so perfect it rivals with any machine, and it's just a test piece...

@davelahoud1256 5 лет назад

Blew me away too, and it really shouldn't have surprised me considering all his other incredible builds and videos.

@Pcat0 5 лет назад

The text was a work of art.

@JoseSilveira-newhandleforYT 5 лет назад

@@Pcat0 Absolutely!

@JakeBiddlecome 5 лет назад

Holy crap I didn't catch that that was a test piece. I got chills when I saw it and immediately wanted one. For what purpose I don't know...

@PaulMurrayCanberra 5 лет назад

@@JakeBiddlecome Hey, Chris: sell the test pieces!

@DominickPeluso 5 лет назад

Forget pewdiepie. Lets get clickspring passed t series.

@animalmother556x45 5 лет назад

Dominick Peluso ...........what the fuq is a "pewdiepie"??

@kenhukushi1637 5 лет назад

I'll hack all the ancient Greek mechanisms in the world to print out "Subscribe to Clickspring".

@cokeforever 5 лет назад

@@kenhukushi1637 it seems more reasonable to hack youtube to replace srart page with cluckspring's channel home

@Mirinmaru 5 лет назад

How dare you

@mattiviljanen8109 5 лет назад

That's an opinion on the Internet I can second!

@askquestionstrythings 5 лет назад

Definitely the most fun I've had watching paint dry.

@heatshield 5 лет назад

Bye, Sharpie. There's a new highly experimental compound in town.

@BrianJ001 4 года назад

To build the stunning Antikythera machine you used modern machines, engineering brass stock metals and drills with steel that I am sure weren't available to the ancient artisans. How the hell did they do it and how many did they make?? And modify?? Clickspring is magic and you are a magician! Many thanks!! :-]

@StuffUCanMake 5 лет назад

Once in a while in the dense forests of RU-vid I come across a true gem like your channel and I feel sad. I am sad that it took me this long to know such a gold mine. Thank you, I will be regular here!

@BrassLock 5 лет назад

A very well expressed comment that also rings true for me.

@aaronbouquet644 5 лет назад

I wish i had not found this chanel, AVE, and This Old Tony right before tax season. Gonna be a real chore explaining the new forge, lathe, and drill mill to the mrs.

@grandmastergeorgez 5 лет назад

You kept the best and simplest for the end.... marking and then rubbing the surface makes everything easy to read.

@DustyKorpse 5 лет назад

This is what the interweb was made for, inquisitive minds coming together to develop innovative solutions to problems. All the best for 2019 to Chris and everyone in the comments section 👍☺

@wewd 5 лет назад

ΕΥΧΑΡΙΣΤΩ ΠΟΥ ΠΑΡΑΚΟΛΟΥΘΗΣΑΤΕ ΤΟ ΒΙΝΤΕΟ

@edgeeffect 5 лет назад

Ευχαριστώ - it would take me a long time to type that into Google Translate without a Greek keyboard... now I can cut 'n' paste. :)

@gfilippou 5 лет назад

That was cool

@jasondoe2596 5 лет назад

edgeeffect, it says: "THANK YOU FOR WATCHING THE VIDEO"

@samc5898 5 лет назад

Google translate is slackin lol

@rolflews 5 лет назад

Looks Greek to me...

@manoslogothetis4247 5 лет назад

Blood, sweat and I hope no tears were involved into making those wonderful videos. You are a modern Hephaestus! Εύγε!

@AJHyland63 4 года назад

Using blood as a marking material adds a new dimension to the expression “ putting your blood into the work”

@mikedrop4421 5 лет назад

It's hard to wait while someone (albeit a genius) reproduces one of the most complex and least understood machines of the ancient world. It's just not a project that lends itself to frequent uploads. Unfortunately.

@Lobsinus 5 лет назад

That's exactly why they're worth waiting for tbh

@wmw1365 5 лет назад

Bob Loblaw one can only dream

@mikedrop4421 5 лет назад

@@bobloblaw1720 oh I totally agree. Doesn't make waiting any easier though. Lol.

@livedandletdie 5 лет назад

@Mike O'Barr no it doesn't but still, if everyone else put in as much effort as Mr. Chris Clickspring then by the high heavens wouldn't we have to wait.

@traininggrounds9450 4 года назад

I'm pretty sure we understand it just fine. It was a clock that matched the timing of the sun and moon and planets. So he could spin it and tell you on what day how the entire solar system would be aligned. And its a fair guess to say it was made by Archimedes given the time.

@elistevens6366 5 лет назад

Seriously, Clickspring is the best channel on RU-vid. Each video raises the bar so much higher for all other content creators. Chris, thank you for another amazing video! Truly, you inspire me, keep up the great work!

@matthewm2528 4 года назад

This is "experimental archaeology" done by a master craftsman. They should hire you for archaeological digs

@PiperFishing 5 лет назад

I'm happy to know that there are so many intelligent people that comment on your videos to give you all these great suggestions.

@sketchstuffs 5 лет назад

Chris, you are a boost to local economies. I see the notification, and before I watch, I run to the store and buy $40 worth of junk food that I can enjoy while watching your new video! 😂😂😂

@Clickspring 5 лет назад

Ha ha! Terrific mate, thanks for tuning in each release :)

@eliot6775 5 лет назад

The painstaking dedication to the finest of details is unparalleled in anything I've ever seen. "no big deal just etched out this entire small plate with intricate detail just as an example". Simply amazing

@Slidaulth 4 года назад

That wax and soot combo would make an ideal method of masking for acid etching as well.

@TheDaken 4 года назад

Our craft is an art. Clickspring you have a beautifully rare talent keep it up 👍

@jayphilipwilliams 5 лет назад

I'm VERY impressed by the intelligence and knowledge of your viewers!!!

@madrandomize5115 5 лет назад

"ΚΑΙ ΕΜΕΙΣ ΕΥΧΑΡΙΣΤΟΥΜΕ ΓΙΑ ΑΥΤΟ ΤΟ ΒΙΝΤΕΟ " (WE ALSO THANK YOU FOR THIS VIDEO) Keep it up !

@usha3938 5 лет назад

Aside from all the "failed" experiments, seeing all those different materials and colours and textures was great on its own :D

@IhsanMujdeci 5 лет назад

My friend who is a programmer like I am put me onto these videos. There are such similarities with this kind of work and software development. Maths, geometry, tool making, exact mechanisms, solving interesting problems with no immediate answer are commonalities between each profession.

@eiriksjon8656 5 лет назад

That`s one hell of a testpiece!! Outstanding work as allways

@RealGusOnDemand 5 лет назад

you just proved that only you can make watching paint dry enjoyable.

@madnessbydesign1415 5 лет назад

"Hey, there's a video you should watch." "Doubt it." "It's about paint drying." "Yeah, no thanks." "It's by Clickspring." "... I'm in."

@RealGusOnDemand 5 лет назад

Madness by Design "its by clickspring." "ive already seen it but yeah I'll watch it again."

@madnessbydesign1415 5 лет назад

Amen. 👍

@citizen116 2 года назад

I am not qualified to even watch you work SIR. Your mastery of focus is astonishing. I have watched the watch makers sand a bridge on a ‘A Lange & Sohne’ watch and was amazed with her efforts as well. You are not the only gifted artisan HOWEVER, you are the only one that has delivered this volume of content to the masses. There is no way to thank you sufficiently nonetheless THANK YOU!

@johnsonpersonal1633 4 года назад

Its fun to think that this is how ancient builders made and combined their favorite marking aids and other inventions. Just word of mouth and fairly simole available ideas

@fasfan 5 лет назад

Quandry: Wants more Clickspring videos because of the amazing quality and skills involved. More frequent uploads would mean less time making Clickspring videos of such high quality. Accepts upload rate because you can't rush art. I want more videos because they are awesome. They are awesome because of the time and care that go into each one.

@levelthr33 5 лет назад

I applause your Greek engraving! At first i thought you had a stencil, but then I saw you did it freehand! Amazing, I as a Greek couldn't have done it better! Also, ΕΥΧΑΡΙΣΤΟΥΜΕ ΓΙΑ ΤΗΝ ΚΑΤΑΣΚΕΥΗ!

@ExMachinaEngineering 5 лет назад

I don't know how the education system works down under, but this is a PhD in Archaeology without a shadow of a doubt!!!! As for the little greek marking at the end... "Ευχαριστούμε που φτιάχνεις τα βίντεο"

@TheFridge 5 лет назад

I never thought I would be so interested in mark out dye.

@jtcustomknives 2 года назад

Absolutely amazing the amount of time he takes to do things. This is hard proof he enjoys the process. I have always said it’s the journey that counts not the destination. Enjoy every step of your chosen path.

@alessandroceloria4573 5 лет назад

Literally giving your own blood for the sake of the video and the project... This... Is dedication... Keep it going Chris, your videos are just plain awesome and inspiring!

@BisdremisKostas 5 лет назад

Somehow i feel so proud being able to read the inscriptions on the dial , ΕΥΧΑΡΙΣΤΟΥΜΕ ΔΙΑ ΤΗΝ ΨΥΧΑΓΩΓΙΑ.

@sheller153 4 года назад

Good choice in watercolors! Winsor & Newton is fantastic!

@howder1951 5 лет назад

Again, answering the unanswerable! Great depth of possibilities, i love that you don't simply "ask" a question. Good work, enjoy these videos I do!

@milanmarkovic4348 5 лет назад

Who are the morons who press thumb down, this is the best channel on youtube, great job Chris.

@christopheleblanc9175 5 лет назад

love the archeological approach to every step of this build, we some times take for granted how easy tooling and marking is now a days, it really puts the difficulty they had in building any thing , let alone some thing as precise and complected as this device was to make,

@timesmoney9459 5 лет назад

Thank you it was very interesting to see. We are waiting for new videos on the topic.

@dimitriskoutsipetsidis 5 лет назад

That final inscription in greek ("thanks for viewing") got me by surprise! I've been following your channel from the clock project and I was beyond excited when I saw you were going to do the Antikythera Mechanism. I find everything about the artifact so interesting and intriguing and have read and seen lots about it - but your series really stands out in so many ways. Hope your content gets some official, and much deserved, recognition by museums and institutions by the end. Thank you so much for your time and effort in sharing this amazing project with us! Greetings from Greece!

@trueherbsman 5 лет назад

..,you'll see me every time! Wow Chris you are so inspiring!

@whatstrue1 5 лет назад

I sear your writing a thesis video for some college student with the depth of your research and testing. This is brilliant man.

@peternicholsonu6090 3 года назад

I watch your videos in a desperate attempt to improve my patience which I badly need to improve. Thankyou so much for making my therapy sooooo interesting.

@1959Berre 5 лет назад

The quality of your video's never seizes to amaze me. One can only guess how much time you spend preparing, filming and editing. Wonderful job. Congratulations on the 400K subscibers, you earned it!

@mitchtavio 5 лет назад

The amount of effort you put into these builds and videos is immense. Thanks for spending so much time on them! That engraved test plate was a whole project in itself!

@zvonimirferina7936 5 лет назад

the lettering in the end is so beautifull, truly a work of art, and you make it look so easy ha ha

@PeterWMeek 5 лет назад

As always, the production values of your videos are head and shoulders above almost every other RU-vid Creator.

@thedabblingwarlock 5 лет назад

Whoa, this is one of the coolest videos I've ever seen. The Copper Sulfate method (on steel) was like watching magic. I wonder if this is how the myths about lead into gold and Midas got started.

@levih7052 5 лет назад

Yeah, that (the copper sulfate) was a particularly beautiful process.

@ItsMeeJon 5 лет назад

I hate that it takes so long for new videos but I understand why. Amazing work!

@kgeorgejunior 5 лет назад

"ΕΥΧΑΡΙΣΤΩ ΠΟΥ ΠΑΡΑΚΟΥΛΟΥΘΗΣΑΤΕ ΤΟ ΒΙΝΤΕΟ". ΕΜΕΙΣ ΕΥΧΑΡΙΣΤΟΥΜΕ ΓΙΑ ΑΥΤΟ ΤΟ ΥΠΕΡΟΧΟ ΒΙΝΤΕΟ!

@Sqtgdog 5 лет назад

I like that you tested all these solutions. The easiest solution is most likely the answer.

@slick4401 5 лет назад

By far the best series of videos on the Internet. Extremely well done. Impeccable work. Congratulations!

@PeterOekvist 5 лет назад

Blood, sweat and tears is what usually goes in to these kind of projects...

@DeadFront1319 5 лет назад

You Sir are a dying bread, absolutely amazing!!! The attention to detail is spectacular!! Thanks for the videos!

@zook420000 4 года назад

5:14 i find something deeply satisfying about that sound of metal tapping together.

@ngiorgos 5 лет назад

Εμείς ευχαριστούμε για τα φανταστικά βίντεο. Με την τέχνη σου δίνεις ζωή στην ιστορία

@cycoholic 5 лет назад

Amazing as always. Your dedication to exploring the possible construction techniques is to be applauded. 😊

@alext9067 5 лет назад

All very interesting, but I wanted to mention that I had purchased the book suggested by Chris on treating steel call Hardening, Tempering, and Heat Treatment by Tubal Cain and it's fantastic. Not only is it filled with factual material, but it's entertaining in that you get a perspective from England many years ago. The book was $12 and it got to my house in about 2 days. You will never get more for your money. It's number one in a series. Enjoy.

@Scrogan 5 лет назад

You really went into depth here!

@matthewroepke4644 5 лет назад

Chris, you’re the coolest horologist out there. Keep up the great work! You inspire so many with your amazing skills. Thank you!

@utooth8114 5 лет назад

I am blown away by your detailed approach to this subject. I've learnt heaps about marking dyes etc in this video. Please keep the great videos coming. 👍

@maxdoran2504 5 лет назад

One of the more outstanding things about these videos is the amount of geniuses in the comments who think of those ideas! Ofcourse he does a great job aswell and your videos are amazing so good job

@mbrsart 5 лет назад

As great as our modern technology is, exploring how ancient peoples might have done things is absolutely fascinating.

@mattinkel7342 5 лет назад

So Dykem is not one of the greek gods then?

@TheProrage509 5 лет назад

Matt Inkel whos dykem

@123bhays 5 лет назад

I believe mr Steele would disagree lol

@TheProrage509 5 лет назад

Ben Hays who’s mr Steele

@jamiemahoney2446 5 лет назад

Dykem is a dye (often blue) used in metal work. Mr Alec Steele is a RU-vid who widely uses said chemical in his metalwork.

@maxximumb 5 лет назад

@@jamiemahoney2446 and literally sings its praise.

@Bereft777 5 лет назад

BEAUTIFUL! The collaboration of many minds guiding a hand of one awesome man. Thank you! I scribe everything, to leave my fingerprint behind.

@clippedwing-bensmith1614 5 лет назад

I don't know about anyone else, but I wasn't prepared for this chemistry lesson at all! Happy new year all!

@antalz 5 лет назад

When it comes to drying time, I think we should take into account the extraordinary patience the makers of these devices had.

@jarofmilk5113 5 лет назад

Your videos are SO thorough and well made, I'm just saying that now even though I've been a fan for a long time. I'm surprised you don't have well over 1 million subs.

@Clickspring 5 лет назад

Thank you mate, very much appreciate you watching :)

@Veptis 5 лет назад

Oh God yes. You are the one that can talk me to sleep. And your videos are inspiring me to keep my projects alive.

@maxximumb 5 лет назад

If you want another good bedtime voice, BigClive here on RU-vid.

@MrSlientdeath 5 лет назад

This is one of my favorite clickspring videos.

@logiboy123 5 лет назад

ZOMG It’s Chris!!! RAWR awesome mechanical powa!!!

@johnthorogood6601 5 лет назад

If I hadn't previously worked out your Stralian accent, the Coles beetroot gave you away mate!. love your videos!

@ROBRENZ 5 лет назад

Most excellent Chris! ATB, Robin

@Clickspring 5 лет назад

Thank you Robin :)

@Sergio-he8sw 5 лет назад

Congratulations on the patience and skill to test all of those ink concoctions. You are the best!

@harkonk 5 лет назад

What an awesome educational video. Being greek that little last scene had me smiling! Thanks!!!

@siegfriedgsa 5 лет назад

For a passionate like me your videos are really incredible ! Thanks for your excellent work ! Cheers from France :)

@manafield89 5 лет назад

As a Greek seeing that last message at the end of the video put a smile on my face. Did you use google translate or you know Greek? i wonder? (it means thank you for watching the video btw)

@jmercouris 5 лет назад

With a name like George Manalis, I would have never guessed your origins! :)

@manafield89 5 лет назад

@@jmercouris Yeah its so difficult to guess, but then again its not like those big surnames that someone may hear like Papadopoulos etc. Fun fact the names George and John are the most used male names in Greece.

@maxximumb 5 лет назад

@George Manalis I thought Nick or Νικόλαος was at the top. Seems like every second person on my brother in law's island is called Νικόλαος or some variation. The rest appear to be either Σπύρος, Χρίστος or ερασμιος.

@manafield89 5 лет назад

@@maxximumb Νίκος or Νικόλαος is like the third most used male name in Greece so you are not wrong about that. Keep in mind though that in Greece is customary that every third generation keeps the name of the first, meaning that the grandparents have the same name with their grandchildren and also some islands have some names in a bigger concentration than other places. Σπύρος and Χρίστος are common names too, but not in the scale of the others. Εράσμιος in the other hand is super mega ultra rare name. So much so that i 've never heard it before. What island is your brother in law from? And am i the only one that finds the whole discussion weird?

@jmercouris 5 лет назад

ναι ρε, εμενα μου το λες; και εγω Γιαννης ειμαι...@@manafield89