Anybody else?? 🙋‍♂️🛠️  

Put a zip tie on the bolts threads so it don’t fall and pick the head up use your brain keep it simple

Once the bolts are that loose, just pick the head up and wiggle it out with the bolt still in the hole. Just don't forget to put it back the same way😂

Drill a hole in the cowl / firewall sill. Weld in a filler plate later after you install the head. Don't forget to cut the wiring harness either. That's also in the way. That's what electrical tape is for. 😂

Rubber hose as tall as the valve spring. Cut down middle and wrap around bolt. Pull head out. Also can use the small long nose vise grips you get at HF for a $1 same ones you hold the hoods up with when the strut out of gas.

1997 Jeep Cherokee in for a head gasket job.. Thing definitely wasn’t something I see on the daily!!

After adding my 1.5 inch manifold spacer this now happens. However a few fire wall remolding hits from my baby sledge it fits fine lol

Vice grips on the flat part.

This is where you tell the customer you got to add some speed holes for free 🕳 😅

Levanta la culata y sale sin ningún problema.😂😊😅

Остальных шпилек нет эту чуть приподнять и головку сдвинуть вперёд в сторону камеры

Take the drive shaft out lift up the transmission take the motor mounts out lower the engine

Nah we cutting up the frame if that shit happens when I’m working

Not a big deal, take a rubber band wrap it around the bolt and the valve spring, holds the bolt up pull the head

Push the cable harness out of the way and drill a hole, so you can raise it up. Once you put the harness back, you wouldn't even see the hole. Customer would never know ... or care. Voila!

I had to put a hole in there because my torque wrench wouldn't fit 🤷🏼‍♂️ definitely not a great spot to put that bolt

Дырку сверли ступенчатым сверлом и вытаскивай заглушку резиновую поьом поставь

What’s been y’all’s worst repair yet?? Let’s hear them ‼️🎤 #IYKYK

Lil piece of hose no biggie, chech harness behind block Lil inspection ,ok

That's a 4.0L for you. Just pick up the head and bring the bolt with it. Common sense pays.

Ahhh jeez

Стаскивай с башкой вместе, чё тут думать?

Looks like a job for a drill

It's not out of the hole enough for the jews to be loose and tilt its way out?

That sucks

kurwa