APM 2.8 flight controller setup | How to make Quadcopter with APM2.8(Part 2) | Mission planner setup

Подписаться 30 тыс.

Просмотров 119 тыс.

50% 1

APM 2.8 Quadcopter building (Part-1) : • How to make Quadcopter...
Download Mission Planner : ardupilot.org/...
COMPLETE TUTORIAL,
3 mode switch setup for flight modes in Flysky fs-i6 transmitter : • Flysky fsi6 3-mode swi...
-*-*-*
Components buy links :
1000kv BLDC Motor : amzn.to/3dOrMPt
Simon k 30A ESC : amzn.to/3pyb8Gz
1045 Propellers carbon Fiber : amzn.to/3R3FH2O
APM 2.8 Flight Controller : amzn.to/3wm3a7k
GPS Module 7M : amzn.to/3AEV9Ns
Power Distribution Board : amzn.to/3wigRUU
Flysky Fsi6 Transmitter and Receiver : amzn.to/3K9hrtM
2200 mah 3s lipo battery : amzn.to/3pxZX0L
*-*-*-*-*-*
Follow us on Instagram :
/ tech_at_home
Like us on Facebook :
/ tech-at-home-220885266...
Music:
The Clock (instrumental) by RYYZN / ryyzn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/al-the-...
Music promoted by Audio Library • The Clock (instrumenta...
Everything You Need Is By Your Side by Vlad Gluschenko
/ vgl9
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/al-ever...
Music promoted by Audio Library • Everything You Need Is...
#apm2.8setup#quadcopterapm2.8#droneusingapm2.8#techathome
Thanks for watching!
*Like Share and Subscribe

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 415

@MultiTechEducation4U 10 месяцев назад

Thnx for your knowledgable video. But I facing problem to ARM it . showing Not Armable some times shows ARM: Leaning . pl help

@funnyclub6488 29 дней назад

how can you upload V4.xx to your APM2.8 but in documentation the last version compatible with APM2.X is V3.2.1 and I tried to upload the V4.xx to my APM2.8, it didn't work, how to do that?

@aliislam5819 3 года назад

brother thank you very much... i have a question that is APM support other gps??

@techathome 3 года назад

I have not tried any high end GPS module bro, I use 7m But I think if that GPS port is compatible it will work.

@Thescienceworks 2 года назад

Can we use it for bicopter

@techathome 2 года назад

You can use kk 2.1 board for bicopter

@withbednoob 9 месяцев назад

Is it compulsory to calibrate each motors rather than doing it at once?

@techathome 9 месяцев назад

Yes it's needed

@MotivationalHub626 Год назад

I'm truly grateful sir 🙏 may God richly bess you for sharing your skills. I am trying to build a delivery drone that carries 5kg and can travel for 10 miles. Please can you help me to select the parts please.

@vincebenedicto5714 3 года назад

Bro, how do i calibrate the esc in the transmitter if i soldered it

@Klien_Morningstar 2 года назад

You can calibrate them all together fr9m the power distribution board, not necessary to do it separately.

@techathome 2 года назад

No problem even if you have soldered, Just use one ESC signal wires to Transmitter 3rd channel and calibrate one by one Let 12v supply be there to all ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yaAf4eofppc.html

@pratapyoutub 2 года назад

Without power module how give power supply in board, shuld we remove the jumper (jp1) please help me sir.

@techathome 2 года назад

It will take power from ESC itself Refer this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UW1-gSySgxg.html

@MmmSss-pc1wn Месяц назад

separately ESC callibrate ho jate , aik saath flight controller k saath same steps krta but kuch nhi hota please help

@ΜακηςΚαλκανας Год назад

Hi can user this in small fishing boat?

@1_Creation 2 года назад

Hi bro please which key to press Because when I press any botton, it does not work and will say calibration failed

@techathome 2 года назад

Change the cable once Also try downloading other version of firmware

@3drccustombeasts381 2 года назад

Hello. could you kindly tell me if there is a way to adjust dead band like there is in betaflight. I've been discouraged from using my APM because of drifting and I know it could be corrected but no matter how much research I do I can't find a way to set dead band in mission planner

@ankitpandey8435 3 года назад

Sir what will be best compas calibration value bec am not able to do it and values are so high than u shown in your video and also when I make my drone stand right it shows on pc that I have move my dron to left at home page (data page) even after right calibration at setup page

@techathome 3 года назад

Values need not be similar, it changes. But steps you follow should be same

@ankitpandey8435 3 года назад

Okay sir

@alroypereira4300 Год назад

My esc get calibrate all together but when i remove the power and plug it again they keep on beeping

@HariRohith Год назад

SAme problem did u get the solution

@MmmSss-pc1wn Месяц назад

same problem

@maddercat 3 года назад

Will this let the quad hover in place then? What do I need to do to get my fpv drone to just sit in one spot without input from me?

@techathome 3 года назад

Try in loiter mode, Once check out this video : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8-3I2Xot3pI.html

@BrjanBuckmaster 6 месяцев назад

What version of Windows is on your computer? I am using a Windows 11 laptop and cannot see the list of COM ports in device manager.

@techathome 6 месяцев назад

Windows 10, but is should not matter on COM ports. Install this Arduino software and allow permission for drivers at the end: downloads.arduino.cc/arduino-1.8.12-windows.exe

@BrjanBuckmaster 6 месяцев назад

@@techathome I have given up trying to use Windows 10. I even installed a virtual XP windows but that failed too as I cannot access the USB port. Turns out that I cannot configure my Tarot gimbal either because their configuration app on the supplied dongle hasn’t been updated since 2012. So I need an XP machine for both. I am hoping that as soon as I get the firmware installed on my APM and configure the IMU I can do the rest using a later version of M.P. On my windows 11 laptop wirelessly via telemetry communications.

@vanaca Год назад

Hello, I am Abdulkadir Badur. I am a graduate of mechatronics engineering. I build a drone for myself, but no matter how much I calibrate the arducopter board, when I start flying and give the gas, the rear engines of the drone take off and start somersaults. When I close the flight and connect it to the computer again, the calibration changes. How can I find a solution? I would be glad if you help.

@aliabbasbaloch4375 5 месяцев назад

Sir I have done each & Everything except configuration setupin apm 2.8 mission planner so my drone arm and disarm runs same but never fly flip in the Right direction of board can you tell me.?

@techathome 3 месяца назад

1. Calibrate ESCs individually and using APM. 2. Check the motor rotation direction and propellers.

@punithsivarampura3843 4 года назад

Best technical videos as always😍🤩

@forexgoldbaba 3 года назад

My channel is only 6 working what I do ? Other switch stick is not working

@techathome 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wezRWqgSyb4.html

@1979zeesh 3 года назад

i have tried using the external compass same like yours and calibrated it before flying. but the issue is that the the drone follows plus configuration when flying even though i selected x frametype. is there any physical orientation to follow when installing this? and also any other changes to be done on FC as i heard some ppl say to play with jumper J2

@deepakhd1626 3 года назад

Try this : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K6abWjJhbsg.html

@Chartered_Edu 2 года назад

Bhai i have CT6B transmitter, can I use it for even gps as u did???

@techathome 2 года назад

Yes you can use But for configuration of TX for flight modes change is slightly different I think, I have not tried

@gdeepakraj609 Год назад

Bro... It is possible to make autonomous drone with apm 2.8 controller without transmitter and receiver... Please tell.

@techathome Год назад

Is it possible using telemetry. I have not tried since I don't have now. You can set the points, and the drone will automatically cover those points.

@gdeepakraj609 Год назад

@@techathome i try to make an autonomous suveillance drone without transmitter and receiver for my final sem project... I am confused that which flight controller is best for autonomous... Raspbery pi, aurdino, pixhawk, or apm 2.8... Please guide me

@gdeepakraj609 Год назад

@@techathome is it possible to rewrite programe on apm controller... Like aurdino and raspbery using python

@Aashutoshkumar-x4x Год назад

Hello sir I need help I use apm2.8 in Quadcopter and my drone is automatically rotate left side on its axis try everything like yaw trim but nothing is working please help me

@techathome Год назад

This might be because of, 1. Wrong propeller or motor spinning direction/wrong motor layout - this things I have already explained in the same part2 video at the end. Verify once 2. Repeat the esc calibration - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P-HbV_d7dIU.html

@Aashutoshkumar-x4x Год назад

@@techathome sir I try everything every possibility of problems but still rotating

@jaydebkarmakar624 3 года назад

I've finished all the programming setup of my APM 2.8 quad but now I want to make some changes in flight mode setup using mission planner, so now do I need to re-upload firmware and recalibrate acc and compass ?

@techathome 3 года назад

No need, directly make changes

@jaydebkarmakar624 3 года назад

@@techathome thank you so much.....

@uxrjimmygaming1357 Год назад

What is power module?😢😢 i need help i just buyed a apm2.8 and having problmes in connection

@techathome Год назад

Power module is used as regulated power supply To convert 12v from lipo battery to 5v needed for APM You can also power ur APM using ESC without even using power module. This way I have shown in my video.

@BhattacharyaAritra 2 года назад

Bro can you please help me? Why i am not getting any option in battery failsafe ?

@1979zeesh 3 года назад

thats an awsome thing. my question: ardupilot wiki says to do the tuning part before first flight. but ur quad still seems so stable without tuning and also with default params....how come, even indoors? did you miss to show something? i also have same setup but in my case the quad leaves ground at 3% throttle (it should be around 50%) and also it drifts to one direction and not straight up like yours. im using 8038 props, 980kv motors and 1300mah 3s lipo and same simonk ESCs you are using

@ahmetenesozturk1902 3 года назад

Hey how can ı connect receiver and transmitter. Are they connect automatically

@techathome 3 года назад

No, You have to bind the receiver and Transmitter. You can get binding Video tutorial

@ahmetenesozturk662 3 года назад

@@techathome thank u i learned how to bind. You are the best ✌🏻

@ΜακηςΚαλκανας Год назад

How to setup this in small fishing boat can you help me .thank you

@techathome Год назад

You can connect brushless ESC directly to receiver No need of APM board i think for boat

@isaiahpaul56 Год назад

bro did you caibrate the esc?

@techathome Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P-HbV_d7dIU.html

@rob22221000 2 года назад

salut comment accelerer la vitesse de rotation de mon quadcopter de mon yaw sur un apm 2,8 ? merci

@franciscoe.9989 3 года назад

**** RESPECT**** GREAT PRESENTATION

@techathome 3 года назад

Thanks

@mandeep7868 2 года назад

I'm not getting that compass coordinate points..what should i do now ?

@techathome 2 года назад

Try this : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K6abWjJhbsg.html

@FPV_Arena 3 года назад

Bro how to connect this flight controller with CT6B transmitter

@techathome 3 года назад

In the receiver same pins only, no much difference

@BTEEEVANSH Год назад

Bro I have APM 2.8 and all steps have been done successfully but not able to arm the drone in last please guide

@techathome Год назад

In the Radio calibration, check whether channel 4 is present for rudder stick (stick used to arm) Also , arming issue happens sometimes, if the GPS doesn't get satellite connection. Try taking it to different place.

@BTEEEVANSH Год назад

@@techathome thanks bro

@abipaily228 4 года назад

Why are we calibrating esc both with receiver and flight controller ?

@ambujarajan 3 года назад

Calibrations give perfect timing and it must work same speed and time with other escs.so they trained individually

@Mebrown_NoBot 4 года назад

Well well well.. Finally, I landed up on some good tutorial. Mission planner ain't working on My PC I don't know why!!!

@techathome 4 года назад

ardupilot.org/planner/docs/mission-planner-installation.html Download from here

@Mebrown_NoBot 4 года назад

@@techathome Working now...It was asking for some data collection for improvement and feedback,,, I was selecting "YES" and it hung. "No" was a better option. It worked afterwards. Thanks

@ais_robotic 3 года назад

Assalamu alaikum vai, can you help me please ?? I am using Apm2.8. my problem is when I rool posative by hand monitor shwing nagative diraction! I finding result and tired..... no result found youtube and other site... please try to say what can I do vai.

@techathome 3 года назад

In the transmitter ( Flysky Fs-i6) _ go to setup _ Reverse _ reverse the channel in which you are getting problem _ long press cancel button to save

@ayushroy501 4 месяца назад

Sir please explain about the JP1 connector.🙏🏻🙏🏻

@techathome 3 месяца назад

ok I will check

@ayushroy501 3 месяца назад

@@techathome Sir, I made the drone and it's working fine in stabilize mode but when I switched it to alt hold mode it's not working properly and not maintaining the altitude it only elevating. Please help me sir 🙏🏻

@ruvedkhan3979 3 года назад

My drone flips on take off please help me ....i use pixhawk, apm, kk but same issue still ... please help me regarding this motor and propellers direction is correct i didn't get where the problem is

@techathome 3 года назад

U have not done ESC calibration Try this once : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P-HbV_d7dIU.html

@deamonlab2725 4 года назад

Did u used the default pid values

@techathome 4 года назад

Yes

@vrushantpatel3434 3 года назад

Please help me my Quadcopter is not hovering properly it keeps moving towards one side I tried esc calibration but didn't work . I am. Using same configuration like yours

@techathome 3 года назад

Have you done ESC calibration in Two methods? Have you checked the propeller direction and fixed the CW and CCW propeller properly?

@vrushantpatel3434 3 года назад

@@techathome yes I did and the prop are also installed in correct direction

@fauziaafshan2774 2 года назад

Bro my APM 2.8 show me error ""no heartbeat packet received"""

@wk713 Год назад

Try different usb cable

@SugarcaneKalpavrukshGroup 4 года назад

In flight mode current PWM : 0 PLZ HELP ME... I'm not able to change flight modes

@techathome 4 года назад

Follow these steps : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wezRWqgSyb4.html

@cooltechgaming470 2 года назад

Bro mere pass APM 2.8 hai lekin Main Usko programming kar liya hai aur Arm Ho Raha Hai Lekin Aam hone ke bad 5 ya 6 second ke bad disarm automatic ho raha hai so please help me

@abipaily228 4 года назад

After arming i am seeing failsafe message below armed message. Also in the battery failsafe option dropdown doesnt have any option. Radio has options

@abipaily228 4 года назад

battery failsafe dropdown option is empty ??

@thecomedyguy8703 4 года назад

when you start the setup do u plug in the battery or not? please reply bro

@techathome 4 года назад

No, don't plug the battery

@thecomedyguy8703 4 года назад

@@techathome one more ques bro is there any chance ill fry my flight controller? some people are saying that mine is a clone apm 2.8 and it will burn when i will install firmware please do reply bro

@techathome 4 года назад

No bro, most of the boards we are getting are clone, But follow the procedure correctly

@thecomedyguy8703 4 года назад

@@techathome thanks a ton bro! Ure the best 💓

@thecomedyguy8703 4 года назад

when i try to install firware it says failed to discover board id please man help me again im scared pls bro pls

@Srisai-Scout 2 года назад

Missing parameter arming_ (all 3), how to fix so that i can do accl calibration

@DeepakKumar-fh4xv 2 года назад

i have issu esc is not calibration to each other some BLDS is running and some not run at time

@techathome 2 года назад

Have you done individual ESC calibration

@smkexperimentz5944 3 года назад

Bro how many minutes is the fly time for 2200 mah battery pls reply bro!

@techathome 3 года назад

We have not checked. Maybe around 10-15 mins (approx)

@vrushabhgundecha4196 Год назад

i have an issue with the COM port In the COM port section it doesn't show an COM port options

@techathome Год назад

Have you installed mission planning .msi format. Also while installing you have to give 'yes' for driver installation ardupilot.org/planner/docs/mission-planner-installation.html

@arunk5866 3 года назад

wow its really great hatsoff man for your explanation

@techathome 3 года назад

Thanks

@ayushroy501 4 месяца назад

@@techathomeSir please explain about the JP1 connector.🙏🏻🙏🏻

@thesamraja8832 2 года назад

Bhai mera transmitter me left right stick sahi se kam nhi ker rahi hai please solve my problem

@kpurushothaman6421 3 года назад

Nice job.. In my APM2.8 FC GPS doesn't working in software it shows always no gps 😢 wt can I do?

@techathome 3 года назад

Once can you take to different place and check

@kpurushothaman6421 3 года назад

@@techathome yeah I tried my best but it doesn't working.. so I stopped my project 😢

@kpurushothaman6421 3 года назад

I'll try after sometime 🙂

@beefybeef1326 4 года назад

Thank you very much for this video. Do i need shock absorber mount for apm 2.6 amd apm 2.8?

@techathome 4 года назад

You can use, if you can buy. But I have used waste sponge.

@vinayakthote3957 3 года назад

Bro my drone isn't arming in loiter mode I used apm 2.8

@techathome 3 года назад

Always start with stabilize Mode After going some height, change the modes.

@sangarp2001 3 года назад

No firmware for bicopter? Is your Transmitter in plane mode or heli?

@techathome 3 года назад

Default plane only, I have not changed that

@babureddyme8348 3 года назад

Hello brother I have some problem with apm flight controller May I contact you brother

@techathome 3 года назад

Yes, please contact us on Instagram

@kanhan4013 4 года назад

12:09 in which mode you fly

@techathome 4 года назад

Stabilize mode

@visionethacademyofexcellen620 2 года назад

hello i am using apm 2.8 but accelerometer caliberation is not working can you help??please

@techathome 2 года назад

Can you try this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K6abWjJhbsg.html

@RajeshM-nd1ev 3 года назад

Hi bro, flight mode in Mission planner show blank. Please help me out

@techathome 3 года назад

Download and install mission planner 1.3.68 (.msi file) from Google and try once

@mkpeker Год назад

Awesome information and experience sharing. Thank you very much👏👏

@techathome Год назад

Welcome

@NSsridhar01272 8 месяцев назад

Hi bro my drone is flying stabilize and ATL mode but loiter mode can't take off and it's flips bro and when I increase throttle high position one motor is Stop spinning in high position when down is not stop tell me any solution bro fast I want submit my project

@Rcrackx2022 5 месяцев назад

Bro my APM 2.8 is not connecting it's showing no heartbeat received wt should i do now

@Krishna.intelligence6047 3 года назад

Can we install it without the gps module ?

@techathome 3 года назад

Yes, But you cannot use flight modes

@charvind6381 2 года назад

Hy brother . wonderful job . Need help guidance with my work

@techathome 2 года назад

Sure

@abipaily228 4 года назад

I cut and soldered my esc wire to board before calibrating. Any other way to calibrate esc

@techathome 4 года назад

No problem, Connect your power distribution board to battery, but single ESC to your Receiver Repeat the same for all ESC'S

@abipaily228 4 года назад

@@techathome my battery was sparking every time i connected it to apm power module, after a few times one esc burned out. I removed that one esc and kept 3 as it is, now when i connect battery there is no sparking. was the esc faulty from the beginning thats why battery sparking or did i do something wrong ?

@abipaily228 4 года назад

also i have removed the red wire from esc as i am using apm power module and removed jumper JP 1. do i need the red wire when calibrating ?

@runtech.engineer9080 3 года назад

Bro, i try follow this step but my drone when it take off in talibize mode going to side..., how to fix it?

@techathome 3 года назад

Have you checked the Motor directions?

@runtech.engineer9080 3 года назад

@@techathome I have......, dron can flight but not stability position

@techathome 3 года назад

1. Do this calibertion once again : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P-HbV_d7dIU.html 2. Keep the battery properly at the center and balance the weight properly

@runtech.engineer9080 3 года назад

@@techathome ok i will try

@ofp6024 9 месяцев назад

I have made a quad using apm2.8 quad is spinning alot , its taking off but spinning,, tried everything, esc calibration, compass calibration, but still its spinning

@fernandohenrique2368 8 месяцев назад

As hélices estão girando no sentido certo 1 horário 2 horário 3 anti-horário 4 anti-horário? De repente é isso.. ou você precisará Trimar pelo controle

@technicalhub1122 3 года назад

Dude My drone is not arming and disarming..... Please help me...i have to repeat the esc calibration to make the motors run..... Hope you reply... 🙏🙂

@techathome 3 года назад

Have you used GPS module??

@technicalhub1122 3 года назад

@@techathome yes

@techathome 3 года назад

Sometimes when GPS doesn't connect with satellite also, u get Same problem. Take your drone outside to some other place and check once.

@technicalhub1122 3 года назад

Yeah I tried but it's not working

@technicalhub1122 3 года назад

@@techathome is it fine if don't arm and run the motors by doing esc calibration??

@technicalhackeryt5770 3 года назад

Bro I want to repair my drone it's all units r working but battery swallow d can u pls gv me some teaching

@techathome 3 года назад

_Battery voltage, u have to check regularly, _When not in use , for storing the battery, total voltage should be around 11.7 v _ While using, In each cell, voltage should not be reduced below 3.5v It will swollen the battery If battery is swollen very much, don't use that, it's dangerous

@AbhinavRawatEC 2 года назад

When I am trying to calibrate the flight controller it is showing calibration failed.....????

@techathome 2 года назад

Change usb cable and try If you get error in compass: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K6abWjJhbsg.html

@btoar6113 3 года назад

Hello, at minute 12:05 it is seen that a propeller does not rotate well until a moment passes, I have this problem with three propellers, how can it be corrected?

@techathome 3 года назад

It happens usually because all properties of one Motor will be not exactly same as other But if you start giving throttle, the RPM should be same, is that working??

@btoar6113 3 года назад

@@techathome It's mine, that's how engines do

@btoar6113 3 года назад

@@techathome ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y0W4NlB8Skc.html

@techathome 3 года назад

Have you done ESC calibration?

@susantakumarsahoo.9121 3 года назад

Brother how many gps takes to 3d fix

@sachin8712 2 года назад

@pshishiraithal6623 3 года назад

On arming my drone all motors start spinning even without incresing the throttle, what to do

@techathome 3 года назад

That is no issues, Even in my case they rotate

@pshishiraithal6623 3 года назад

@@techathome is that ok then

@nehachannel353 3 года назад

maine aap ki sari process ko achhe ki kiya hai fir bhi nahi ho rha hai motor chal hi nahi rahe hai

@HariRohith Год назад

Can you pls help me with one thing When i turn on my drone with battery the beep sound never stops and the when i try to arm it by connecting to pc drone doesn't respond and stays in disarmed state

@techathome Год назад

Are you using GPS module

@HariRohith Год назад

@@techathome yes an external one

@HariRohith Год назад

@techathome I have mo gps lock or there are 0 sats available so should i change the pre arm settings in standard params And thanks for replying ! :)

@techathome Год назад

These days my GPS module is also not getting connected with satellite. Try this once: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vkb2qH6UQZA.html

@HariRohith Год назад

Thank you for ur videos i finallly got how to arm the drone can you give me any idea on how to integrate servo with apm board

@vishalbiradar4618 2 года назад

Bro i wnana do project on it can u help me

@akhilatr6645 2 года назад

It's showing calibration failed in accelerometer calibration,can you explain me how to solve that problem

@techathome 2 года назад

Change the cable once, Try this also : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K6abWjJhbsg.html

@legendary1038 3 года назад

Bro can you please tell can it do autopilot

@techathome 3 года назад

If you use telemetry, u can set points in map and drone move only in that path on its own. This thing is possible with Telemetry.

@legendary1038 3 года назад

Thanks bro

@technicalchannel6416 3 года назад

Hlo Bhai g Mena same banaya hai lakin uski speed bhaut jyda hai 0 throttal par b Kiya kru

@techathome 3 года назад

In the Transmitter, go to Throttle curve and change the values, try once

@technicalchannel6416 3 года назад

Bhai g please Hindi or Punjabi ma Bata do please

@technicalchannel6416 3 года назад

Bhai g throttal curve ma kesa ja sakta hai Mera pas ct6 b transmitter hai

@technicalchannel6416 3 года назад

Pl bataya

@thibautkouame1721 Год назад

What a helpful video, thanks lot🥰

@techathome Год назад

Welcome

@skyhighperceptions4632 2 года назад

hello everyone, i bought a APM 2.8 last year and it says is too old i cant update the firmware. Any ideas?

@techathome 2 года назад

Manually select older version of firmware and try

@SoumsArt 2 года назад

Do you want to Collab with me?

@amusya2 3 года назад

When I try to calibrate Acceleration of APM 2.8, it gave us 'Calibration FAILED'. Please give me a solution.

@techathome 3 года назад

Reinstall the firmware and check Also try different version of firmware

@SHIVAMKUMAR-k3v2z Год назад

i am downloading latest mission planner , but my apm not supported firmware and not uploading

@techathome Год назад

Try to use old version, may be 1.3.68

@acharisimhadri2806 3 года назад

i have done all process following by you but for arming ,its showing like need 3d fix .please help me on this

@techathome 3 года назад

Have you used GPS?

@acharisimhadri2806 3 года назад

@@techathome yes

@acharisimhadri2806 3 года назад

its showing pre arm: need 3d fix

@techathome 3 года назад

Take your drone outside, it also happens when GPS doesn't get satellite Connection Connect battery And try to arm

@acharisimhadri2806 3 года назад

@@techathome okay but it wont arm right without usb

@__EYES__ 4 года назад

bro I'm having trouble with my apm setup it is showing high gps hdop please tell me what to do

@techathome 4 года назад

Reinstall firmware once, Click on - install firmware legacy

@__EYES__ 4 года назад

@@techathome I did everything bro when I flew my drone and put it in loiter mode it just goes up idk what is wrong with the drone but anyways thanks a lot for replying and even I live in karnataka I just got to that even u live in karnataka from ur videos thank u

@bhilashboruah156 4 года назад

Bhai me arm karne par... Rc not configured dikha rha ha

@HariDas-jw2sf 2 года назад

very well explaineed ...superb and i need help in arduino uno r3 programming... so please help in new video of it..

@techathome 2 года назад

Tutorial : ru-vid.com/group/PL4B0LEKY-jrT_fjOGkX_NZ52ZHZf8s9S-

@ArshaansEdits 4 года назад

it says failed to discover board id, please help me

@techathome 4 года назад

Don't click on ( install firmware ) Click on ( install firmware legacy )

@shivufpv6248 4 года назад

Can you PL make Rover using APM 2.8 flight controller????....!!!

@techathome 4 года назад

I will try bro

@sweetcollegegirl960 4 года назад

@@techathome wow

@maguindanaoanspride9012 2 года назад

Hello sir may i request the complete diagram for this?

@Prashanth_PM 3 года назад

Bro can pls give me reply... Am getting this kind of error in mission planner while installing firmware in my APM 2.8 Error is : Failed to download new firmware: System Argument exception : The Port name cannot be empty. Parameter name : Portname at System IO ports,Seriolport.set,Portname(String Value) Like this error am getting

@techathome 3 года назад

Failed to download firmware : for that problem I have explained in the same Video, you can select the other version which I have mentioned

@Prashanth_PM 3 года назад

@@techathome bro I selected previous version...again getting same error

@Prashanth_PM 3 года назад

@@techathome bro can u pls give ur wsp number

@techathome 3 года назад

Can you contact us on Instagram ( id is in description)

@Prashanth_PM 3 года назад

@@techathome ok

@ruslan_yanchyshyn 8 месяцев назад

Why "pitch" on video at 6:30 is inverted?

@techathome 8 месяцев назад

On my Quadcopter, forward and backward was working reverse, So I had inverted pitch. I don't know exactly if it's only for me or others are also facing.

@ruslan_yanchyshyn 8 месяцев назад

@@techathome it is reversed for me too, that is why I asked. But my drone has IMU rotated by 180 degree by YAW. So it is unclear what is right settings.

@techathome 8 месяцев назад

But follow the flight controller forward arrow direction as reference and place it.

@acharisimhadri2806 3 года назад

iam getting problem for radio callibriation. i didnt get RX symbol on trasnsmitter. can you help meon this

@techathome 3 года назад

Have you completed the binding step?

@acharisimhadri2806 3 года назад

@@techathome i have done now I'm seeing RX symbol but for now I'm getting error for esc calibration

@techathome 3 года назад

@@acharisimhadri2806Follow this - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P-HbV_d7dIU.html Don't do ESC calibration from mission planner. Use this method

@acharisimhadri2806 3 года назад

@@techathome Done .which calibration we should do first

@acharisimhadri2806 3 года назад

@@techathome Thanks a lot for your response

@منوعات2030-ض7ي 3 года назад

thank you brother

@KrishnaKumar-bf2zt 4 года назад

Very well explained and kudos to your patience 🙌

@rsdudes9115 3 года назад

Bro can I use apm planner

@techathome 3 года назад

Yes

@Christmas_46 9 месяцев назад

in my device manager in com port it is not showing as arduino mega

@techathome 9 месяцев назад

Install Arduino Software: downloads.arduino.cc/arduino-ide/arduino-ide_2.2.1_Windows_64bit.msi

@reelshub1748 4 года назад

From were do you buy all parts

@techathome 4 года назад

I had brought this long ago, from local store in Bangalore.

@reelshub1748 4 года назад

Can you tell me a website for buying drone parts

@techathome 4 года назад

As I have seen, usually online prices will be high. But , Robu.in and Flyrobo.in are better, compared to other websites.

@reelshub1748 4 года назад

But robu.in and robofly are showing out of stock

@reelshub1748 4 года назад

And it's real indian website

@pradeepkumarts999 3 года назад

Hi, Can anyone pls help me in the issue of "Pre Arm: Need 3D fix" it's not at all arming. Kept for several minutes without clouds still same issue. I reinstalled several times It's latest APM 2.8 & Latest autopilot Installed 3.2.1 which picks automatically avilable as latest version. Compass is calibrated. Checked both enabling and disabling Geo fencing Issue is from several months.

@techathome 3 года назад

Have you used GPS module