Arctic Liquid Freezer III

Подписаться 11 тыс.

Просмотров 44 тыс.

50% 1

I was provided this unit before the launch date but I took my time to go through this unit. Here are my thoughts.
Credit With Thanks
================
Arctic Official Website - www.arctic.de/en/
Arctic Liquid Freezer III - www.arctic.de/en/Liquid-Freez...
Arcitc Merchandise -
Track: Killercats - Kaibu [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Killercats - Kaibu | E...
Free Download / Stream: ncs.io/hideyourheart
Arctic Liquid Freezer III Promotion
============================
Arctic - www.arctic.de/en/Liquid-Freez...
Amazon.com - www.amazon.com/stores/page/BC...
Cyber Cypher Computers - www.lazada.sg/products/arctic...
PC Kaki - shopee.sg/-NEW-MODEL-ARCTIC-L...
Arctic Summair USB Desk Fan
=========================
Arctic webshop - www.arctic.de/en/Summair/AEBR...
Tech Dynamic - shopee.sg/ARCTIC-Summair-Plus...
My Go To Online Shops In Singapore
==============================
Cyber Cypher Computers
www.cybercyphercomp.com/
www.carousell.sg/u/CyberCyphe...
shopee.sg/cybercypher.computers
PC Kakis
pckaki.com/
www.carousell.sg/u/pckaki.sg/
shopee.sg/pckaki
Time Stamp
==========
00:00 | Intro
01:20 | Arctic Summair USB Desk Fan
04:55 | Color variant and style of the Liquid Freezer III
05:38 | The items in the box
06:06 | The accessories
07:42 | Sizes offered in Liquid Freezer III (240/280/360/420)
07:54 | Measurements of the radiator (280/360/420)
09:38 | Structure of the unit
10:20 | Improvement on radiator fin stack
11:06 | Improvement on radiator hose and connection joints
12:27 | Improvement on mounting mechanism, the coldplate and the pump.
13:46 | Radiator Fans
14:46 Improvement on cable connection (Fan, Pumb and VRM fan)
15:57 | Safety precaution on cable connectors
17:47 | Serviceable AIO pump cover
19:48 | Best way to mount the AIO pump on AMD platform
25:12 | Best way to mount the AIO pump on Intel platform
32:20 | ARGB illustration
33:38 | Noise test on AIO Pump and VRM fan
35:12 | Thermal test - Intel and AMD platform (LF2 vs LF3)
36:06 | Promotion on LF3 to celebrate Arctic 23rd Annivesary
37:10 | UEFI configuation on AMD and Intel
38:29 | Application use and the methodology
41:12 | Actul test run (AMD & Intel)
42:25 | The results (AMD & Intel)
45:06 | Conclusion and End

Наука

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 402

@KleoYan 4 месяца назад

Kindly note, I have made a mistake at timestamp 14:56, be it if you are using the single connector or split connector, the drawing ampere is from the Pump header, make sure you plug the pump header to a 2A fan header or pump header of your motherboard.

@dddman9220 4 месяца назад

also u have to rename timestamp at 25m

@KleoYan 4 месяца назад

@@dddman9220 thank you. Greatly appreciated it to have correct my mistakes 👍👍👍

@user-em3ez6ug8o 4 месяца назад

I have been watching your videos and I kept quiet. You my friend, in every aspect on pc products, you've explained clearly. The details what we wanted, you have provided. I love the way you have illustrate the strenght of a pc product. I did note that other reviewers having issues mounting this AIO but again, you've shown us how easy is to mount it. Pitch perfect, I am now totally convience and will purchase this without hesitation. Thank you for the indepth review.

@Ttblondey 4 месяца назад

I have a bit problem at first when installing it but manage to install the 2 screw

@KleoYan 4 месяца назад

Hi james dean, welcome to my channel, Thank you for your valuable feedback. Greatly appreciated it and all the best in your build. 😉

@KleoYan 4 месяца назад

@@Ttblondey I see, if you have a firm foundation as to hold the block, you won't have an issue. Just like the way I have shown in this vid. I have no issues mounting it.

@ChrisM541 2 месяца назад

The best introduction and installation video for the Freezer III on RU-vid...by far. Well done!

@KleoYan 2 месяца назад

Hi ChrisM541, welcome to my channel and thank you for your valuable feedback. Greatly appreciated it and all the best with your build too 😉

@brandonflorian9044 4 месяца назад

This was the best guide I found on the internet about this new cooler. Thank you for doing it, it was helpful to me when building my PC.

@KleoYan 4 месяца назад

Hi Brandon Florian, welcome to my channel and thank you for your feedback. All the very best with your build too 😉

@michaelmakoev2072 4 месяца назад

absolutely amazing content! thank you for the detailed breakdown of the features, the setup process, and the performance review!

@KleoYan 4 месяца назад

Hi Michael Makoev, welcome to my channel and thank you for your valuable feedback. Greatly appreciated it. 😉

@ARCTIChannel 4 месяца назад

Once again - well done! We're really enjoying your detailed reviews. Thank you for sharing your thoughts!💙

@KleoYan 4 месяца назад

Hi Arctic, you are most welcome. Thank you for the support as always, greatly appreciated it. 😉

@user-dx5tu6yz7t 4 месяца назад

Once again you have done a fantastic job explaining the ins and out of this cooler. while a few other popular reviewers noted that is was cumbersome to mount, you took your time to explain and illustrate just how easy it is. I know what my new cooler will be. Please keep up the good work and thank you for your honesty.

@KleoYan 4 месяца назад

Hi Mr. T Cas, welcome back and thank you for your valuable feedback. I am glad you like my content and with your kind words, I will improve further in future on my content. Thank you!

@Blafard666 8 часов назад

THANK YOU, THANK YOU so much !! I was loosing my mind trying to install the pump !

@KleoYan 7 часов назад

HI Blafard666, welcome to my channel and am glad this content is useful to you. All the best with your build 😉

@mfgw27 27 дней назад

U solved the am5 mounting problem, thanks for sharing the way you do.

@KleoYan 26 дней назад

Hi Gwendolyne, welcome to my channel and thank you for your feedback. All the best with your build too. 😉

@navster87 4 месяца назад

I love how you pretty much confirmed my theory on the correct method of mounting for AMD. The review i saw from Gamer Nexus, they had such a hard time mounting it and I could clearly see he wasn't holding down with enough pressure in order to mount it. They just called it a flaw without trying a different method of mounting. I love how thorough you are with your reviews, you deserve more subs!

@KleoYan 4 месяца назад

Hi navster87, welcome to my channel and your feedback has given me motivation. I will keep going and to improve on my future content. Thank you for your support, greatly appreciated it 😉

@navster87 4 месяца назад

@@KleoYan as a Singaporean myself it's good to see we have a great tech reviewer in the country. My support will always be there!

@KleoYan 4 месяца назад

@@navster87 oh hi ya fellow Singaporean 😉 thank you for the support. 👍

@navster87 4 месяца назад

@@KleoYan I have a question.... I have looking to buy this AIO. Do you think the 420mm will fit my case Lian Li Lancool 3?

@KleoYan 4 месяца назад

@@navster87 Hi, I have physically compare the radiator length between the LF2 and LF3, it's the same as for the width LF2 is at 140mm and LF3 is at 138mm. You will be able to fit in your Lancool III without issues.

@TheDaveyd29 2 дня назад

its amazing how many reviews moan about the instal, all they need to do is watch this , thanks my dude

@KleoYan 2 дня назад

@@TheDaveyd29 hi and welcome to my channel. Thank you for your kind words 😉 all the best with your build too.

@sentfromheaven00 4 месяца назад

Thank you so much I spent like three hours last night trying to get this thing on now I have lower back pain but you have finally helped me tysm!!

@KleoYan 4 месяца назад

Hi sentfromheaven, welcome to my channel. I am glad this content aid you. Thank you for your feedback and to have visited my channel.

@jelianradoev6246 20 дней назад

God bless you for the AM5 installation instructions. I was reading horror stories about mounting it, but with your method i did it first try, extremely easy! Thank you so much for this video!

@KleoYan 20 дней назад

Hi Jelian Radoev, welcome to my channel and thank you for your feedback. Congrats on the installation too 😉

@mailsibul 2 месяца назад

Thanks to this video I don't have much trouble when installing the cooler.

@KleoYan 2 месяца назад

Hi MrMuunster, welcome to my channel and am glad you did the mounting with ease 😉

@akkulaturi5736 3 месяца назад

Thanks a lot for this, you saved me as a first time builder

@KleoYan 3 месяца назад

Hi Akkulaturi, welcome to my channel. I am glad this content did help you. Thank you for your feedback and all the best with your build 😉

@iRacingbalkan Месяц назад

The best review so far, your reviews and instructions for installing Artic should be included on your page, very detailed and carefully, you have one more subscriber.

@KleoYan Месяц назад

Hi iRacingbalkan, welcome to my channel and thank you for your feedback. Greatly appreciate it 😉.

@noxmu4715 4 месяца назад

With all the hype about this cooler, everyone complains about the mounting for AMD platform. You are the only one who does it with ease. Your explanation is brillant! Kleo, you've done it again. you not only tell us the detials but providing good deals. You should do sales, what a waste of talent. Thank you Kleo, another grade AAA+ review.

@KleoYan 4 месяца назад

Hi Nox, welcome back. Once again thank you for your support, hmm as for doing sales, I dislike doing sales lol, but thank you for the suggestion.

@TheMrDrMs 4 месяца назад

Great review! I really love my Arctic II, def purchased the III, and I really like being able to control fans/pumps/vrm cooler individually now, that's great. My II will still get put to good use too, upgrading another system off a dark rock pro 4 (7700k at constant 5.1GHz, previously on nzxt x62)

@KleoYan 4 месяца назад

Hi TheMrDrMs, welcome to my channel and thank you for your valuable feedback. I am glad you have place the LF2 in good use and to purchase the LF3. Yup now you can control the RPM individually. All the best wtih your build 😉

@TheMrDrMs 4 месяца назад

@@KleoYan Got it! I wish the cold plate covered the whole IHS on my AM4 (5900x). Cold plate is large enough, but offset is wrong (or made to be universal, so they compromised) Thanks again!

@KleoYan 4 месяца назад

@rMs Good observation. This I can answer as why Arctic did it this way. Initially they wanted to do separate Liquid Freezer III. a set just for Intel and a set for AMD (coldplate on the pump already offset), which each have a different coldpate. the AMD offset coldpate and the Intel (normal coldpate no offset). But final decision was to do one unit to suit both platform as to reduce the confusion to new pc builders. So thats why for what you purchase right now. Intel will be perfect dead center but for the AMD the offset mounting bracket will move the pump down just to have the coldpate cover the vital part of the AM4 or AM5 Die.

@half_r_mk5 3 месяца назад

I have this AIO as well, I got the 360 III BLACK version and upgraded the 3 fans to an Arctic P12 Max, and it is powerful! With the P12 Max upgrade, I can now dissipate to 300W thermal. On the standard fans, I think at 288W was doable. Right now I set my CPU (i9-14900K) to PL1=253W and PL2=253W, ICC=307A, under volted to an OFFSET of 0.1V, with a Cinebench 23 score of Multi-core = 39075, Single Core = 2351. It's a recommended Cooler for every INTEL I9 especially for the 14th gen series.

@KleoYan 3 месяца назад

Hi Half_r_mk5, welcome to my channel, thank you for sharing your experience. Greatly appreciated it 👍

@half_r_mk5 3 месяца назад

@@KleoYanHey thanks! Good review. I just did another test on my i9-14900K, set the PL1=288w, and PL2=288, ICC=400A Max...It temporarily throttled on P-Core2 that was the only thing for a few seconds, then it was ok, Final temps were 96c no major thermal throttling, with a final Cinebench 23 score of Multi=40307, and my Single Core = 2344, just went down a bit on the single core. Still it is a capable AIO cooler.

@KleoYan 3 месяца назад

@@half_r_mk5 nice, am glad you like this liquid cooler.

@killeragosta 4 месяца назад

Thank you for the great review! I have only two questions. What version of the Arctic Freezer II have you used in this comparison? The last one? (v7) And what type of mounting for AMD socket? (offset mount? Same as the new AFIII?) Thank you again.

@KleoYan 4 месяца назад

Hello killeragosta, welcome to my channel. I am using a year 2019 Arctic LF2 which is no reversion, but I what I did on the LF2 is, I separate the pump and the fan on different fan header. Pump to the W_Pump header and Radiator fans to the CPU_FAN header.

@ceuser3555 4 месяца назад

Thank you for this detailed video.

@KleoYan 4 месяца назад

Hi CE User, welcome to my channel. I am glad you like my content, thank you for your feedback and all the very best with your build too. 😉

@ceuser3555 4 месяца назад

@@KleoYan thank you! Yes, I subscribed immediately. Thank you youtube for the suggestion, that I came across your channel.

@KleoYan 4 месяца назад

@@ceuser3555 hi welcome back and thank you to have subcribed to my channel. hmm maybe this will aid you further. Now this is not able the MX6, you can apply this to any thermal paste which has good viscosity ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xZ2R4roF1_Q.htmlsi=vSD57bjKTBxwdabP , this content I did have add a numerous of viewers to obtain good thermal results on their build. Just a hint, remember to apply thin layer and not too thick. Hope this will help you too and if you have any questions and unable to reach me, you can always drop me an email at godzylatech@gmail.com. I will try to help you out.

@ceuser3555 4 месяца назад

@@KleoYan I am considering thermal pad instead of a thermal paste, being a newbie, I can’t guarantee a clean placement of it plus I don’t like the idea of having to reapply it at some point in the future.

@Mindris 4 месяца назад

Thanks for the informative video brother! I have one question, does the hose coming out of the pump house conflict with tall m.2 heatsinks on the motherboard? I have an Asus Rog Strix Z790-E (Wifi II) and the heatsink on the top M.2 on that mobo is tall.

@KleoYan 4 месяца назад

Hi Mindris, welcome to my channel and am glad you like this content. Thank you for visiting and all the best with your build too.

@KleoYan 4 месяца назад

Sorry miss out a question. I am not able to answer you on this but there are some who reported that some motherboards will have issues mounting this block as it’s either the m.2 slot is too near or it’s too tall. You might want to check the compatibility list at Arctic website. Click on the installation guide of the LF3 and it will list down which motherboard is compatible or not compatible.

@Mindris 4 месяца назад

@@KleoYan Thank you so much, I found it and it's compatible.

@KleoYan 4 месяца назад

@@Mindris good to hear. All the best with your build.

@cfc3972 2 месяца назад

great video ty , question what remote do you use to control the rgb? wasnt aware it can be controlled with a remote control

@KleoYan 2 месяца назад

Hi jay jones, welcome to my channel. I just grab the controller from the Geomatric Futures Eskimo 36 AIO ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hAVIZrZI-V0.htmlsi=urmVn3jzvARhtn3P&t=250. If you need a controller, you can also purchase one at amazon but is of other brand. example www.amazon.com/gp/product/B0CXXJKPR8/ref=ox_sc_act_image_1?smid=AY2X8YCKXN3Y5&th=1

@ceuser3555 4 месяца назад

This is the best installation video, very detailed. I haven’t seen anyone else do a more in-depth installation for newbies like me who have not done a pc build. Please upload a full PC build step by step instruction please. Thank you.

@KleoYan 4 месяца назад

Hi CE User, welcome to my channel. For the basic setup, I have done a series and you might want to check it out. The principle are of the same when I builld a PC. This playlist contents part 1 to 3 which will be easy for you to follow ru-vid.com/group/PLEW-b-2vYDdMbh1ct8hfm-M8FtbyE8grf&si=WmV6yP8YFyAJleC6

@ceuser3555 4 месяца назад

@@KleoYan thank you. I will look into it. I have not built a PC before and I have the parts but still anxious to start. It’s always hard to let go of a currently usable PC that was assembled in store.

@ceuser3555 4 месяца назад

@@KleoYan i was not able to see your channel before I got my PC case. I bought a meshify 2 xl as many have recommended that this one can safely fit a 420mm aio from arctic and my motherboard is msi x670e ace, an e-atx mobo.

@KleoYan 4 месяца назад

@@ceuser3555 I do have the same feeling like you when I just started, but I move on. There are valuable lessons at the begining too. Just stay focus and practice safety when you are assembling PC parts. Handle with care and double check all connections on the actual build. In my guide, I always test PC equipment first and to install the OS before I mount all to a PC. I wish you all the very best.

@KleoYan 4 месяца назад

@@ceuser3555 yup, that's correct, you should not have an issue to mount the LF3 420 to a meshify 2 xl, even though your case was tested with the LF2 420 but the size on both LF2 and LF3 are identical. The only slight difference is that LF2 has a wide of 140mm else for the LF3 is at 138mm. Don't worry too much, you will be fine 😉

@Star_Gazing_Coffee_Lover 4 месяца назад

Hello from California, great content.

@KleoYan 4 месяца назад

Hi LoveTheCoffeeBerry, welcome to my channel and thank you for your valuable feedback and all the best with your build too 😉

@mercurio822 4 месяца назад

how do the Arctic 280 fit in the top of the montech king 95 ? Its such a thick boy. wish this would have been out with the montech king 95 review.

@KleoYan 4 месяца назад

Hi Mercurio, welcome to my channel. I would say a hit and miss as the size lenght of LF2 and LF3 280 are the same. you can watch this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vc1MD0bbcoE.htmlsi=EyIA5ZhzpVB0pNo2&t=1543 watch timestap 25:43

@danieldacorso8263 4 месяца назад

Great tutorial, loved your channel! Is there any benefit of using the split connector over the single one?

@KleoYan 4 месяца назад

Hi Daniel Dacorso, welcome to my channel. Yes there is. In my opinion to prolong the lifespan of a pump. It’s best to run it consistent rpm which I have fix. I can control the rpm of vrm fans and radiator fans. If you plug the single cable. What ever you control. All will follow, this will be bad for the pump. Plus for vrm and rad fans the noise you can’t control either. As all three will follow to one settings.

@1sredna 4 месяца назад

I'm curious as to how high the pump block is from the motherboard to the top of the pump. I'm using a vertical mounted GPU and I'm not sure that the pump block will fit, I suspect it might hit the GPU, or the tubes will. Can you give me some insight?

@KleoYan 4 месяца назад

Hi SREDNA, welcome to my channel. A very good question. Let me see what I can do on my next content, but do pardon me as it will take sometime. Hope you don’t mind to wait. 👍

@deuswulf6193 4 месяца назад

This is my issue as well. I have a vertically mounted 4090, and its practically up against the bottom my RAM. Add the offset for AMD platforms and the pump block gets even lower. Ooof!

@KleoYan 4 месяца назад

@@deuswulf6193 hmm. I think I have replied on this.. all these feedback will be going to Arctic 😉

@GoldenEagle0007 4 месяца назад

great in depth video 🤝

@KleoYan 4 месяца назад

Hi GOLDBULLETS, welcome to my channel and thank you for your feedback. All the best with your build too. 😉

@snaplash 2 месяца назад

Does the cover have any function other than holding lights and looking pretty?

@KleoYan 2 месяца назад

Hi snaplash, welcome to my channel. The cover not only does ARGB, it has a fan which helps to cool or sweep off the hot areas of your motherboard vrm area.

@MG0301 4 месяца назад

Does thicker the radiator would be better for cooling? In all AIO brand, the Arctic AIO only use the thick rads and does the thicker rads when installing inside a smaller case (Example: Asus Prime AP201) would take a lot of space, right?

@KleoYan 4 месяца назад

Hi MicerGlancer, welcome to my channel and yes, which thicker radiator and good static air pressure, your CPU temp will be lower. In practice why Arctic is always listed top AIO is due to their radiator thickness where other brands AIO are following. Example, from 27mm standard thickness to 30mm or 32mm. You see, bigger surface area will absorb more heat and to dissipate heat. With the higher static air pressure like the Arctic P12 Max, temperature will go alot lower. As for mounting into cases, there are restriction on space, you will need to check if it can fit to your case. as for Prime AP201, is a no go to use LF2 or LF3.

@MG0301 4 месяца назад

@@KleoYantrue, I heard if you install LF2 or LF3 in the smaller case you won’t connect all the cables on the top of the Motherboard because of thick Radiator. That’s make sense. In your opinion between LF3 and ASUS ROG Ryujin III which would be better in term of price to performance

@KleoYan 4 месяца назад

@@MG0301 about this, both perform well. but Arctic LF3 has the upper hand if using 280 or 420 with the improvement made, 1st it's quiet, 2nd the surface area is more. 3rd it will definately out perform the ryujin

@MG0301 4 месяца назад

@@KleoYan ok, Thank you so much, Boss

@KleoYan 4 месяца назад

@@MG0301 hmm.. call me Kleo will do and thank you to have visited.

@itscartmanbrah4856 4 месяца назад

i have an AIO already it’s the Deepcool LT520 do I still need to remove the brackets for that AIO to properly install Liquid Freezer 3?

@KleoYan 4 месяца назад

Hi it'sCartmanBrah, welcome to my channel. Yes you need to as different band liquid AIO have their own mounting mechanism. You will need to take the lt520 mounting and change them accordingly it the liquid freezer III.

@deadcypher1029 4 месяца назад

Could u change the fans for this AIO? I'm asking cuz i wanted to use lian li fans to go with the rest but if i can't I'm fine with the stock fans

@KleoYan 4 месяца назад

Hi Dead Cypher, welcome to my channel. Yes you can. After you have changed the fans. Just make sure your Lian Li uni fans are plug to its own controller. As for the connection on the LF3. Plug the single cable which controls the pump and vrm to the pump header on the motherboard.

@pouringpoipoi5777 4 месяца назад

i have same 7950x can i ask what do you find good air cooler? cuz i dont wanna use aio. i got traumatized before my aio was leaked and i dont plan to go aio back anymore

@KleoYan 4 месяца назад

HI Pouring Poipoi, welcome to my channel. The aircooler I have tested and will not break your bank are as follow. Thermalright Phanstom spirit SE 120 (7pipe) , Deepcook AK620 and Montech DT24. these will be my pick.

@Perrajajaja 4 месяца назад

Great video! Do you know if it is possible to change the orientation of the Arctic logo on the pump-cover?

@KleoYan 4 месяца назад

Hi Perrajajaja, welcome to my channel. Nope you can't change the orientation of of the pump-cover.

@Perrajajaja 4 месяца назад

Thanks for the response! That's to bad, since the logo will be sitting at a 90percent angle in my case😂

@KleoYan 4 месяца назад

@@Perrajajaja you are most welcome. I would not advise you to mount the pump hose at the side. Infact I don't think you can do that as the mounting brackets only allows you to mount either hose up or hose down and not towards the rear (Rear I/O) nor front (Ram slot). Overall as mentioned, for best results is to mount your hose facing towards the m.2 slot.

@Perrajajaja 4 месяца назад

Thanks for the replies! In my case, the backplate of the motheboard is facing upwards, so the orientation looks different😊

@KleoYan 4 месяца назад

@@Perrajajaja ok, then you got to be flexible to see what is applicable to you to fit the contact frame.

@przemekn.8814 3 месяца назад

Thanks for review! I have a question... Do you think the 280mm aio will be enough for 7950x (in eco mode 105W, or even 65W)? Or maybe I should go for 360mm?

@KleoYan 3 месяца назад

Hi Przemek N, welcome to my channel. Yes the 280 definitely is more than enough to tame the 7950x. Just make sure that your case have enough clearance to mount it.

@przemekn.8814 3 месяца назад

@@KleoYanThank you for your answer. I want aio 280mm because I want to build a relatively compact computer. But everywhere I read: "buy 360mm!"

@KleoYan 3 месяца назад

@@przemekn.8814 many do not know this, a 280 LF2 or LF3 can defeat the 360 on thermal and they are quiet to run. This is due to the 140mm fans which can run at lower rpm and to push more air to the radiator. Also imaging 360 is a cup and 280 is a plate. You pour hot water to both, when you use a domestic fan and blow both at the same time. Which will cool faster? The hot water in the cup (360) or the hot water on the plate (280)?

@przemekn.8814 3 месяца назад

@@KleoYanThank you! You convinced me. So I decide on aio 280mm (I've never had water cooling). I'll probably choose LF3.

@KleoYan 3 месяца назад

@@przemekn.8814 you are most welcome. Just be sure that your case can fit and have enough clearance from the motherboard vrm heatsink area. Also just to share, besides watching how to mount the LF3 in this content. Try this method apply thermal paste. I always have 99% good thermal results. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xZ2R4roF1_Q.htmlsi=DGYUGY9OnYKwWL8E

@chemaalonso7931 4 месяца назад

There is no thermal throtling with the 280? Why cores only at 5.1 and not 5.7?

@KleoYan 4 месяца назад

Hi Chema Alonso, welcome to my channel. I am from a hot and humid country year round and I prefer to stay at 80 to 85 degrees max. If cooling allows I will pump power limit up. Or PBO2 settings up.

@AnonymousUser-ww6ns 2 месяца назад

I have a love and hate relationship with AIOS. But this one seems to be good quality.

@KleoYan 2 месяца назад

Hi Haz, welcome back. I was once like you but right after I started to use Liquid AIO, I have good experience with them. My first Liquid AIO was the ID Cooling ice flow 240 and been using it for like less than a year and the pump failed. So I went back to Aircooler. Then I saw this Arctic Liquid Freezer II 280 (Year 2019). The moment I get to touch it at the IT Fair, I like it. I bought it for USD $82 bucks and have been using it every since. Till today, I am still using it as it serves me well. So ya, I can understand how you feel. Anyway yes Arctic does very good quality products which is budget friendly 😁

@AnonymousUser-ww6ns 2 месяца назад

Cool Good to know

@KleoYan 2 месяца назад

@@AnonymousUser-ww6ns you are most welcome 😊

@metruk88 3 месяца назад

31:31 cables must hide first on special spot for them otherwise rgb and vrn fan maybe will not work. Grate video!

@KleoYan 3 месяца назад

Hi metruk88, welcome to my channel and thank you for your feedback. Yup you are right, thats why I have spoken about it at timestamp 33:58. Once again thank you. 😉

@metruk88 3 месяца назад

@@KleoYan I miss this part. Still grate video, i think it is a most complete one on RU-vid. I took a white version and realy enjoy it with black and white parts. Extremly quiete 30% using pump. Only 1 problem in pc is asus tuf rtx3070 when playing games max speed 80% with MSI afterburner but steel loud.

@KleoYan 3 месяца назад

@@metruk88 I see, did you undervolt your RTX3070? if you did, the fans might not ram up so high plus performance might improve too.

@metruk88 3 месяца назад

@@KleoYan no underwolts. Just stock use only. So with 80% i have temp 78,5-79,5C. Playing in 2560-1440. Probably it is good.

@KleoYan 3 месяца назад

@@metruk88 I see, that's pretty ok. I mean your temperature 😉

@JJsNightmare 3 месяца назад

Hi, I got PUMP, VRM and FAN cable and I don't know where to put them since the fans work, but I don't get any RGB lightings working

@KleoYan 3 месяца назад

Hi Jonathan Jansson, welcome to my channel. which motherboard are you using, mind to list out the brand and model.

@JJsNightmare 3 месяца назад

@@KleoYan ASUS Prime Z790-A WIFI

@KleoYan 3 месяца назад

@@JJsNightmare based on your motherboard manual dlcdnets.asus.com/pub/ASUS/mb/LGA1700/PRIME%20Z790-A%20WIFI/E21270_PRIME_Z790-A_WIFI_UM_V3_WEB.pdf?model=PRIME%20Z790-A%20WIFI page 12 of 80. I will do this, plug your LF3 pump connector to AIO_PUMP (1A) as the total power draw from your LF3 pump (0.35A) + VRM Fan (0.05A) + 3 x P14 ARGB Fans (0.17A) is a total of 0.91A, then plug your LF3 fan connector to CPU_FAN and your LF3 VRM connector to CPU_OPT. as for your ARGB connector, plug to the 3pin 5v ARGB header on your motherboard, use armoury crate and when at the aura sync dashboard, select the argb header which you want to control the argb effects of your fans and pump.

@gore_ot_yma 3 месяца назад

Hello Could you please advise what is the distance between the pump mounting screws?

@KleoYan 3 месяца назад

Hi Nikita, welcome to my channel, the distance between the two pump mounting screws holes are 62mm apart, be it AM5 or Intel Gen12th to 14th

@gore_ot_yma 3 месяца назад

@@KleoYanThank you very much for your answer

@KleoYan 3 месяца назад

@@gore_ot_yma you are most welcome. All the best with your build. 😉

@Starwarsxmarvel Месяц назад

Great videos just thinking about buying this however I have seen some review with people saying that it is extremely loud what do you think is it loud or quite.

@KleoYan Месяц назад

Hi Starwarsxmarvel, welcome to my channel. The noise to me is not loud but still it’s up to individual listening. Also you might be interested to know which type of processor to apply on. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ca2zGSQvWog.html

@Starwarsxmarvel Месяц назад

Thank you man you are so dedicated to this stuff the videos you upload are so detailed and helpful and you respond to all comments regardless. I am subscribing for sure

@KleoYan Месяц назад

@@Starwarsxmarvel you are most welcome. I am glad to help and thank you for subscribing. All the best with your build too. 😉

@SEN100N 4 месяца назад

Hello, Why do you say you have to clean with alcohol before applying thermal paste if it's brand new? Did you mean if there was still thermal paste left on it or did I misunderstand? Because I don't see the point if I have a new processor and new AIO to clean with alcohol to apply thermal paste. By the way I received my Liquid Freezer III 420 a-rgb today, very excited to build the PC.

@SEN100N 4 месяца назад

Oh I understood you are talking about cleaning the AIO for possible sticky plastic residue, not for the processor itself

@KleoYan 4 месяца назад

Hi SENVOK, welcome to my channel. It's up to you. I just have a practice on this. Processor is new yes you can just plug and play but for me, I will clean it first and as for liquid aio coldplate, once you remove the plastic cover, there might be residue on the coldpate, thats why I clean it too.

@sunwalker2438 4 месяца назад

very clear and helpful video

@KleoYan 4 месяца назад

Hi SunWalker, welcome back to my channel and thank you for your valuable feedback. All the best with your build too. 😉

@rcpxxr4452 4 месяца назад

Good job man, Quick question, I have a 120mm arctic 2 with a defective pump, do you think it is possible to adapt the arctic 3 pump to the arctic 2 ?

@KleoYan 4 месяца назад

HI RCPxx R , welcome to my channel. I am unsure what you meants by adapt the Liquid Freezer III to the Liquid Freezer II. both Arctic Liquid Freezer II and Freezer III have a different structure. LF3 will be an improvement over the LF2 in terms of temp on an AMD platform.

@rcpxxr4452 4 месяца назад

@@KleoYan no lf3 with aio 120 mm, is it possible to mount the two pipes and the pump of the lf3 on the radiator of the lf2 aio 120 mm

@KleoYan 4 месяца назад

@@rcpxxr4452 as mentioned both are of different builds. Structure are different so nope. Why the hassle? I mean if you have the LF3. Just replace your LF2 or If your LF2 pump is faulty and it’s still under warranty, you can raise an RMA with Arctic and get it fix.

@rcpxxr4452 4 месяца назад

@@KleoYan thanks for the information all this hassle? Because there is no lf3 aio with 1 fan. For fun I would have upgraded my lf2 with the lf3 pump.

@KleoYan 4 месяца назад

@@rcpxxr4452 I see. You are most welcome.

@Arejen03 2 месяца назад

is the basic 240 version enough for ryzen 5 5700x3D?

@KleoYan 2 месяца назад

Hello mHelroy, welcome to my channel. If your case have good airflow. A 240 Liquid freezer III will be sufficient. 😉

@Hyperion1722 4 месяца назад

Installing it at the top of the pc case (mine is enthoo pro) is critical especially on the clearance to motherboard. I opted for the 360 because it has thinner fans at 25mm while the 280/420 is 27mm.

@KleoYan 4 месяца назад

Hi MSJI 1722, welcome to my channel. A good choice made. Thank you for sharing your input and all the best with your build too. 😉

@cheaterjung8096 4 месяца назад

Got the arctic Freezer III today, can you show us your MSi BIOS Monitor Fan settings?

@KleoYan 4 месяца назад

hi Cheaterjung, welcome to my channel, do pardon me, I have dismantle the unit but the settings are as follow Radiator fans - CPU_FAN set to smart fan on PWM and temperture sensor to CPU. VRM Fan - SYS_FAN set to smart fan on PWM and temperture sensor to motherboard Pump - PUMP_FAN, disable smart fan and set to full, sensor to CPU

@rossjames8798 4 месяца назад

Good job man!

@KleoYan 4 месяца назад

Hi Ross James, welcome back and thank you 😉

@juligomez2493 2 месяца назад

For me was hard af to mount this aio i scratch a lil bit the copper plate from the aio but is too little, is going to be a problem or it doesnt matter? The problem i had is that only one side was going down and the other one never was going down you have to do a lot of press...

@KleoYan 2 месяца назад

Hi Juli Gómez, welcome to my channel the little scratch is ok, don’t worry about that. As for mounting, yes it does take a little force but the main point is to have sturdy grip and to anchor the thread in place. I guess it greatly depends on how each individual hold and to position the pump block.

@juligomez2493 2 месяца назад

@@KleoYan nah finally I mounted but thats all 3 lil Scratch, but comon artic, thats too hard to screw the screws.. thanks for the reply cause I quit the thermal paste and again put it ill check when I got all the build the temps and other thing I put all vrm,pump and 3 P14Max on the CPU fan on my motherboard cause its support 3A in total, my question is if P14Max works on 0db Ill put a curve till 40% 0db what are going to happend with vrm and water pump?, are going to work at minimum rpm? And what is the optimal rpms for vrm and water pump always 100% or with the 0db curve from artic IS fine?

@KleoYan 2 месяца назад

@@juligomez2493 I would use the split cable. Pump connector will be providing power to VRM and Radiator fans, use the VRM on a fan header and I would set to run at 50%, you do not need to run VRM fan at full, it's just to assist to sweep off the warm air from VRM areas. As for fan connector (Radiator fans) do as per normal with your own fan curve which is based on the thermal of your CPU. Last but not least. I will leave the pump at 100%, if it's loud then set to 80% consistently.

@guilladogui8259 3 месяца назад

Very good video, what is the noise comparison between the 280mm iii and the 320mm iii?

@KleoYan 3 месяца назад

Hi guillado gui, welcome to my channel, just my opinion. both are quiet but some says it's loud. in comparision between 280 and 360 of the LF3. 280 will definately be of less noise as the 140mm fans RPM is lower but grabs more air pressure. This is due to the bigger blade diameter.

@guilladogui8259 3 месяца назад

@@KleoYan thank u I ordered the 360mm LF3 for the same intel cpu that u are using 13700k I haven’t put it together but I’m still deciding which one would be better for me I want something quiet. U think the 280mm LFiii would be enough for that cpu

@KleoYan 3 месяца назад

@@guilladogui8259 hi a lot do not know this. Infact a 280 is better than a 360

@Poseidonios_Bellerophon 22 дня назад

Thank you for the hard work that you are putting into your videos. -Εὐχαριστῶ ἐκ τῶν προτέρων!

@KleoYan 22 дня назад

Hi Ποσειδώνιος Βελλεροφῶν , Welcome to my channel. I am glad you like my content and all the best with your build too. 😉

@Silent-1983 2 месяца назад

Thank You! ❤

@KleoYan 2 месяца назад

Hello Silent 83, welcome to my channel and thank you for kind words. All the best with your build too 😉

@Silent-1983 2 месяца назад

@@KleoYan I got the freezer 2 360mm for like 4 years now, is amazing, but i think i want a change, so i will buy the freezer 3, is there a cover for the fan vram, i don't want to see the arctic logo? I see 3-4 celsius difference, it's nothing, i want it for the design and to support Arctic, love their coolers and prices! btw you did an amazing job with this video, much appreciated man!

@KleoYan 2 месяца назад

@@Silent-1983 that's nice. me too, I am having the LF2 280 which is still running after 4 years. As for the logo on the VRM fan, there are no cover and the logo is pretty hard to remove. Thank you for your valuable feedback and all the best with your build too 😉

@GanJosie 4 месяца назад

So, this LF3 better than Ryujin III, sir? Currently, I use ryujin III, and my 14900k min temp 37-38 idle, but I think it's still hot. My room tempt a bit hotter than yours, around 32-33, so I think to replace it with this LFIII. 😅

@KleoYan 4 месяца назад

Hi JosieGan, welcome to my channel. This I have no comments but for LF2 or LF3 280 or 420, with good static pressure, it will out beat the ryjin III 360.

@Tpecep 4 месяца назад

Why you care about idle temp? In idle the only thing that should matter than your pc is completely inaudiable, even if your temps are 50c

@KleoYan 4 месяца назад

@@Tpecep hi ya. welcome back. lets just say that others are curious, I mean no wrong asking and yes, overall what matter most is during load which I agree with you. 😉

@GanJosie 4 месяца назад

@@Tpecep I care for both, my pc inaudible even slightly over 50, but I live in a HOT country, and it's often too hot, so I want to press the temp as low as possible even during idle. 😮‍💨

@13BulliTs 4 месяца назад

thanks a lot more clear now. I struggle only with the 3 pins on my board B650M-HDV/M.2 where there is 2 on top and 2 on the down side to plug in, would like to understand where goes what on this board.

@KleoYan 4 месяца назад

Hi Hansoe Venema, welcome to my channel. which brand of board is that?

@gaziaris 2 месяца назад

Is the new aio compatible with the lian li uni sl-infinity fans?

@KleoYan 2 месяца назад

Hello gogeta01, welcome to my channel. Yes you can plug the SL Inifinity fans to this Liquid cooler radiator.

@gaziaris 2 месяца назад

@@KleoYan Thank you!

@KleoYan 2 месяца назад

@@gaziaris you are most welcome 😉

@44Mercy187 3 месяца назад

Hello Kleo Yan its been one month. I Still dont understand how to remove the fans like idk what to do after with the cables if im using the splitter i would love if u respond.

@44Mercy187 3 месяца назад

or the one fan cable prob i will use the one nit the splitter

@44Mercy187 3 месяца назад

And like where would it go i am using a 3 splitter into 1 fan and plugging it into cpu fan where would then the 1 cable go from the pump?

@44Mercy187 3 месяца назад

Maybe u can do a tutorial just MAYBE

@KleoYan 3 месяца назад

@@44Mercy187 hi welcome back. you might want to refer to the instruction manual online. support.arctic.de/cpu_liquid_coolers just select the AIO size you are using.

@Ttblondey 4 месяца назад

Bro the arctic fan add is it available in SG?

@Ttblondey 4 месяца назад

The table fan

@KleoYan 4 месяца назад

@@Ttblondey hi welcome to my channel, yes they are. scan the QR Code and it will take you to the shop where you can purchase the desk fan.

@chemaalonso7931 4 месяца назад

Hey @kleoYan if you were me im doing a build with the 7950x, what motherboard you will pick and what liquid freezer III model for not get thermal throtling never with this cpu, I need your answer please

@KleoYan 4 месяца назад

Hi Chema Alonso, welcome to my channel. For motherboard, I will need to know what do you use the 7950X? as for cooling this processor by default, I will go for LF3 280 (push pull) or LF3 420.

@chemaalonso7931 4 месяца назад

@@KleoYan Im going to use It for rendering and proxmox virtualization, I just want a good motherboard and a cpu cooler that give me 5.7 boost when im rendering without thermal throtling I just want for my need what do you pick if you were in my side :) thanks!

@KleoYan 4 месяца назад

@@chemaalonso7931 i see.. should just grab a mac mini M3 lol.. ok jokes aside, for budget mid tier, I will go for ASRock X670E Steel Legend or even the ASUS TUF Gaming X670E-PLUS WiFi 6E, both are of good VRM solution and power phases. As for the liquid cooler, LF3 280 (push pull) or LF3 420.

@chemaalonso7931 4 месяца назад

@@KleoYan thanks so much!

@KleoYan 4 месяца назад

@@chemaalonso7931 you are most welcome. Please take note on case airflow too. all the best with your build.

@44Mercy187 4 месяца назад

Nicee finally

@KleoYan 4 месяца назад

hello its_Mercy , welcome back and thank you for your support too 😉

@ObscenePizza 4 месяца назад

Nobody talks about how much the tube on the bottom stick out from the AM4 socket. I'm pretty sure the tubes will collide with my vertical GPU mount. But there is no way to verify without actually trying. Asked Arctic support for (offset) measurements, but they told me to ask my case manufacturer if it's compatible. 😒

@KleoYan 4 месяца назад

Hi ObscenePizza, welcome to my channel. That's a very good point you've pointed out. Another commenter did mention if it's possible to Vertical mount a GPU, I see what I can do to illustrate that but it will take sometime, hope you dont mind waiting. Thank you!

@ObscenePizza 4 месяца назад

@@KleoYan Thank you, really appreciate the effort.

@KleoYan 4 месяца назад

@@ObscenePizza you are most welcome. as mentioned. I will see what I can do. thank you for the suggestion. some info which I have gathered. It will be difficult to do Vertical Mount with a 4090 GPU as the height of the GPU will block the AIO from mounting it behind the GPU as the hose are the issue. I will test it out with the 4070ti and 4080 at a later stage. Thanks again for the question.

@flaccus123 4 месяца назад

Great explanation. I see the fans are setup for push and the fan cables are daisy chained and the last one goes down into the tubes sleeving . What if you want to mount the rad in the front of the case and have fans setup for pull. Can they easily be flipped over and can you still have the cables go down the side of the rad that is hidden. Also what if you want to change the fans completely ? How do you remove the fan cabling from inside the tubes sleeving ?

@KleoYan 4 месяца назад

HI Keith Flanagan, welcome to my channel. if you flip the fans to pull configuration, the cable which is in the tube is long enough to cater for the other side and if you change fans, I would still plug to the tube cable or you can choose to plug at a separate cable which is directly plug to your motherboard fan header. As for the cable that is in the tube, you can't remove it. I will just cable tie it and to hide it nicely. As you can see in this test, for the LF2, I have done the separation, as I know if I am to use the LF2 single cable, the rotation of the pump and fan will be much weak. So I have the LF2 pump to my Pump_Fan and radiator fan to CPU_Fan. For the LF3, I am using the splitted cables and not the single cable.

@flaccus123 4 месяца назад

Thanks very much for the detailed reply. I already own an EK Nucleus CR360 Dark running Noctua NF-A12X25 fans.. I wonder how this rates compared to the LF3 360

@KleoYan 4 месяца назад

@@flaccus123 I see, if you already have the EK Nucleus CR360 Dark with the Noctua fans, the result is comparable or better on your AIO.

@flaccus123 3 месяца назад

@@KleoYan I forgot task with Arctic Freezer III 320, how do you find the pump noise when controlling everything from the single pwm cable. I have heard reports of it being noisy. Thanks.

@KleoYan 3 месяца назад

@@flaccus123 hi, for the 360 which you hear in the content, the mic is very near the pump and to me it’s not noisy when you place in a case.

@richardajoy79 Месяц назад

I have the Freezer II and I like it, but this does need the P14 Max fans and not the P14's it comes with.

@KleoYan Месяц назад

Hi Richard Joy, welcome to my channel. You are not wrong and it's best to provide more static pressure performance fan and the LF2 is still very capable till today.

@Hardwaretuned 4 месяца назад

Where does the vrm specific cable go. There is absolutely no instructions or guidance anywhere from artic about this.

@KleoYan 4 месяца назад

Hi Hardware Tuned, welcome to my channel. I would do this. Since the pump connector provides power to your pump, vrm fan and your radiator fans (I have correct this, please refer to my pin up comment) I would connect the pump connector to any motherboard fan header which has a 2A load. best is to connect it to W_PUMP or AIO_PUMP, kindly check the ampere of your motherboard which provides 2A.

@Hardwaretuned 4 месяца назад

@@KleoYan I'm using separate connections. So I'll ask again. Where does the VRM ONLY cable go.

@KleoYan 4 месяца назад

@@Hardwaretuned for VRM connector, you can plug to CHA_FAN or SYS_FAN, as there are only 2 wires on VRM. then set the fan curve accordingly to your liking.

@ouki4925 4 месяца назад

They took a huge step backwards with the LFIII pump. It's very loud and I had to return mine. It's literally the only thing I hear on my PC since all my other components are virtually silent XD

@KleoYan 4 месяца назад

Hi OuKi, welcome to my channel and thank you for your feedback. I guess is up to individual sensitivity on noise. I have tested 3 unit, 1 which is provided by Arctic and 2 which are purchased. I don't find them noisy, as mentioned, it depends on individual hearing, plus you can tune the RPM for the VRM, you don't have to run full, VRM fan can be tune in a way that during idle it can run at 800rpm, once temperature goes up, you can also set the max rpm run. Still thank you for your feedback and am sorry that it's noisy for you.

@ouki4925 4 месяца назад

@@KleoYan all is good. It's still a steal at the current sales price for those who aren't bother by it.

@KleoYan 4 месяца назад

@@ouki4925 thank you for the reply. greatly appreciated it.

@deuswulf6193 4 месяца назад

I agree, though mostly with the design of the water block. The placement of the tubes on the pump itself are a limiting factor for some builds, and rotating the pump is not even an option. Maybe intel can flip it, but AMD is a no go as it would offset in the wrong direction. At least with the LF2, the tubes didn't get in the way of anything.

@KleoYan 4 месяца назад

@@deuswulf6193 hi welcome back, something which we should feedback to Arctic. on my end let me reflect this to them. Hopefully infuture if there is a LF4, this might be their consideration. Thank you again for your feedback.

@NGreedia 4 месяца назад

Very informative video as always 🙂. Unfortunately the shipping to Canada negates any promotional discounts 😢

@KleoYan 4 месяца назад

Hi ya NGreedia, welcome back. oops so sorry to hear that.

@ShenLong88 2 месяца назад

My Mainboard is ASUS TUF B650 Plus Wifi , I just want to make sure whether it's correct or not? PUMP cable = AIO PUMP pin VRM cable = CPU OTP / Cha Fan Pin FAN cable = CPU Fan pin Thank you

@KleoYan 2 месяца назад

Hi Shen Long, welcome to my channel. The layout you have mentioned is all good.. but do note, if you place VRM connector to CPU_OPT, whatever fan curve you done on CPU_FAN, the CPU_OPT will follow.

@GustavoSilva-oj6pd 2 месяца назад

@@KleoYan Hello, i have a question, my motherboard does have only one sys fan header but have others PWM 4 pin header called "top case fan" can i connect the VRM cable in there?

@KleoYan 2 месяца назад

@@GustavoSilva-oj6pd Hi and welcome to my channel. Mind if I ask which brand and model of motherboard are you using?

@obsammyboytv4356 Месяц назад

How to install it without using lf3 contact frame?

@KleoYan Месяц назад

Hello obsammyboy tv, Welcome to my channel. You can’t mount without the contact frame.

@g.t.o9835 4 месяца назад

I apologize for the inconvenience, but it seems there might have been a mistake with my purchase of the Arctic Freezer III ARGB 420mm cooler. Unfortunately, it appears that the package did not include the necessary screws, ARGB controllers, or thermal paste required for installation and no new contact frame from Arctic. Could you kindly assist me in resolving this issue so that I can properly install the cooler? Your help would be greatly appreciated. Thank you. (I bought this cooler from Amazon (95$))

@KleoYan 4 месяца назад

Hi G. T. O. welcome back, as much as I wanted to help you, without complete package, it will be hard to mount your liquid AIO. I strongly encourage you to send in your issue through here support.arctic.de/menu/support . check your package againts he package here support.arctic.de/liquid-freezer-iii-420-a-rgb you might need to take some photos of your currect package, also attached your invoice of your purchase from amazon. Claim your rightful warranty from Arctic.

@g.t.o9835 4 месяца назад

@@KleoYan thank you so much for helping me if i can just buying the new contact Frame how come with Arctic Can please share the link of the product and the screws necessary to mount my i7 13700k if you can't please seggest any solution because if i contact Arctic that gonna take a long time please help me

@KleoYan 4 месяца назад

@@g.t.o9835 the contact from is not for sales, it comes with the LF3 which you have purchase. I know it's going to take sometime but that's the only option you have at the moment.

@g.t.o9835 4 месяца назад

@@KleoYan how much time can take around 1 week ? two week? for answer me or view my message.give please i sphere of time i wait 🙏

@KleoYan 4 месяца назад

@@g.t.o9835 Hi, I am not from Arctic, won't be able to answer you this question. Best if you can submit the warranty claim as mentioned to you. my previous message I strongly encourage you to send in your issue through here support.arctic.de/menu/support . check your package againts he package here support.arctic.de/liquid-freezer-iii-420-a-rgb you might need to take some photos of your currect package, also attached your invoice of your purchase from amazon. Claim your rightful warranty from Arctic.

@Coco-rl9kn 4 месяца назад

hi I bought this watercooling for my ryzen 7 5700x but the water block does not cover the entire processor and I have lower temperatures than with my double tower cooler

@KleoYan 4 месяца назад

Hi Coco95cc, welcome to my channel. It might not cover the whole IHS but it does cover the am4 die area due to the offer from this LF3. 😉

@Coco-rl9kn 4 месяца назад

@@KleoYan thank you for answering me, so it's completely normal but I have less good performance than with my cooler

@KleoYan 4 месяца назад

@@Coco-rl9kn huh, no, you should have good thermal results when using the LF3. part of the reason is this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ugg_6bvYZAk.html , though is LF2 but LF3 is build with the same concept and it enhance further as I have illustrated in this content, even though mine is of an AM5 platform. I am curious, which aircooler are you using before the LF3? maybe try this method to apply your thermal paste. as it does aid my viewers. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xZ2R4roF1_Q.html . One last question. which LF3 size did you purchase? 240, 280, 360 or the 420?

@Coco-rl9kn 4 месяца назад

@@KleoYan I have a Thermalright Peerless Assassin 120 White ARGB 6 and the watercooling size is 240mm

@KleoYan 4 месяца назад

@@Coco-rl9kn oh ok. this is shocking, do pardon me as normally when I get liquid AIO for my own usage, is either a 280 or 420. wish I could test the 240 LF3 against the Thermalright PA 120.

@ceuser3555 4 месяца назад

Have you tried a push pull setup on LF3? Is it better?

@KleoYan 4 месяца назад

Hi CE User, welcome back. Yes, push pull on a LF3 280, it drops around 6 to 9 degrees on a 7950X and similar to a 14700K. Else for the LF3 360 will be around 3 to 5 degrees.

@ceuser3555 4 месяца назад

@@KleoYan Hello! Good to know. I might do a push pull setup for the LF2 or LF3 420. What fan should I buy? Do you have a video guide on how to install the additional fans? How will the power be supplied on the additional 3 fans?

@KleoYan 4 месяца назад

@@ceuser3555 Hi, no I don't but you will need 12 more additional long radiator screws and as for power up all the 6 fans on LF3, you will need a fan hub which has a sata cable to draw power directly from your PSU.

@ceuser3555 4 месяца назад

@@KleoYan thanks! Sounds like a lot more work. I wish Arctic came up with a preconfigured push pull option.

@KleoYan 4 месяца назад

@@ceuser3555 you can always leave your feedback through their official website or to their Reddit forum. 😉

@44Mercy187 4 месяца назад

i dont know where the pump vrm and fan cable goes.Like Fan cable goes to cpu fan and pump goes to aio pump and vrm to cpu opt?

@KleoYan 4 месяца назад

Hi its_Mercy, welcome back. if you are using an Asus board, yes you can plug the VRM to CPU_OPT but do note that if you plug to CPU_OPT, the rpm will be controlled by CPU_FAN as both these share the same settings. If you want total control, I advise to plug it this way. Pump to AIO_Pump, Fan to CPU_FAN and VRM to CHA_FAN

@44Mercy187 4 месяца назад

@@KleoYan OMG BRO ILY NO HOMO

@44Mercy187 4 месяца назад

@@KleoYanand can i take out these fans? like i wanna replace it with the montech Ax120 just for the aesthetic?

@44Mercy187 4 месяца назад

Just curious

@KleoYan 4 месяца назад

@@44Mercy187 hmm. you might lose the thermal or should I say it will increase in temp as the AX120 pressure static is not as good as the P12 or P12 ARGB.

@Daisudori 4 месяца назад

I tried 2 units of the LF III but the pump is much louder then LFII. Also when on lower rpm then the LFII (~2000 rpm)

@KleoYan 4 месяца назад

Hi ya Daisudori, welcome to my channel. hmm.. I guess each have it's own sensitivity on pump noise and fan noise. So sorry that you find it loud you might want to tune down the RPM of your pump to 80% but there might be and increase of thermal by a degree or two

@Daisudori 4 месяца назад

I shaked the rad around while the pump was running and now its quiet. Didnt work on the first unit tho. Prolly some trapped air.

@KleoYan 4 месяца назад

@@Daisudori That's good to hear. Infact I too tested 2 more other units. the one which I have and the 420 which belongs to my colleague. it's quiet but the 360. for some reason it's louding. gonna get intouch with Arctic on this, might need to do an RMA on the 360. by the way, thank you for your updates.

@Daisudori 4 месяца назад

MY units were both 360 (black argb)@@KleoYan

@KleoYan 4 месяца назад

@@Daisudori hi you might want to do the same as in contact Arctic support about your car experience. As you have bought two units.

@randomprog115 4 месяца назад

Hi can you do a demo on am4 platform if its possible?, Most of the reviews that I've seen only covers am5. I'm planning to max out from 5800x to 5950x and I've been eyeing this cooler :D new subs here!!.

@KleoYan 4 месяца назад

Hi Random Prog, welcome to my channel, do pardon me as I no longer have any AM4 platform in hand, so sorry about it, but the way to apply the block to the IHS in a AM5 platform is of the same as applying to an AM4 platform.

@kasarnfla 3 месяца назад

At 37:50 you see where it says asus multicore enhancement and its set to auto. Change it to disable enforce all limits. If you do that you wont have to change anything or miss with the negative offset. The setting is whats making you are trying to fix. Just look at the PL1 and PL2 wattage on stock settings. Then disable the auto setting Asus did and look how the wattage changes from 4096watts to 243watts. Your welcome.

@KleoYan 3 месяца назад

Hi Roderick Howell, welcome to my channel. Hey thanks heeps and greatly appreciated it for the tip. 👍👍👍

@josepapas9082 2 месяца назад

My Motherboard is Gigabyte H610M H V2 DDR4 , my question is where to connect the VRM and PUMP connector. i bought the Liquid Freezer III 280 ARGB. also the RGB pin cant find any plug in the motherboard. Thanks.

@KleoYan 2 месяца назад

hi jose papas, welcome to my channel. Your motherboard does not have the argb header. You might need to get a argb controller and based on your motherboard layout on page 4 download.gigabyte.com/FileList/Manual/mb_manual_h610m-h-v2-ddr4_1002_e.pdf?v=5df21aacf8b97861c1ead4621afe93a5 , use the all in one cable of the Liquid Freezer 3, plug to CPU_FAN.

@josepapas9082 2 месяца назад

@@KleoYan yes thanks maybe start savings again for a mid level motherboard with complete headers for all the pin in Liquid Freezer.

@KleoYan 2 месяца назад

@@josepapas9082 I see, what you can do now is to use the all in one connector of the Arctic LF3, at least your aio still can function without the argb.

@josepapas9082 2 месяца назад

@@KleoYan yes thanks Kleo.

@josepapas9082 2 месяца назад

How about this Motherboard , is this good as replacement? Asus Prime B660M-A WiFi D4, LGA1700, mATX, 4*ddr4

@Tpecep 4 месяца назад

Great video brother. Can you share results with 280mm compared to 360mm?

@KleoYan 4 месяца назад

Hi Tpecep, welcome to my channel. I see what I can do but kindly wait as I have my main job to do. Do pardon me that you got to wait. Thank you for your suggestion.

@Tpecep 4 месяца назад

@@KleoYan Thanks for reply, it might be a great video comparison if you do all three models 280/360/420, but please if you will ever do such video use something like 280w power limit. I am using LF2 280mm now and 14900k, getting 90-95c with 320-340w loads, but mine CPU is delided. I ordered LF3 360mm in hopes to see lower temps, maybe as low as 80 degree in full load :)

@KleoYan 4 месяца назад

@ Hi, thank you for suggestion but on your request on having the power drawn at 280w or above it, I am sorry but to reject this, The area I am at, it's hot and humid and my test are targetting to hot and humid contries. I wouldnt want to test in an aircon condition. Besides this, I have fried 3 of my processors which warranty are void (13900KS, 14900K and a 7950X). Hope for your kind understanding that for processors, I do not have any sponsorship and all processors used in my content are out from my own pocket. I am so sorry that I can't comply, thank you!

@FLA1L1NGSHUFFLE 3 месяца назад

I can't get my rgb to change when I hit the led button on my tower.

@KleoYan 3 месяца назад

Hello Ryan DC, if you plug this ARGB from the AIO to your motherboard ARGB header. Your case led switch will not work. You have to connect it to the case ARGB controller.

@FLA1L1NGSHUFFLE 3 месяца назад

@@KleoYan it's a 4 pin connector correct?

@KleoYan 3 месяца назад

@@FLA1L1NGSHUFFLE ⁠nope 4 pin is to control rpm of fans. It’s the 3pin 5V ARGB

@FLA1L1NGSHUFFLE 3 месяца назад

@@KleoYan lol I have to look for that one. I don't remember where I plugged it in.....

@KleoYan 3 месяца назад

@@FLA1L1NGSHUFFLE for the LF3, trace the cable, it's pretty easy. you have one on the AIO Pump and another at the fan end.

@spartanez6282 2 месяца назад

спасибо за обзор )) еще б тесты глянуть 420 старого образца и нового 420 есть ли разница )))

@KleoYan 2 месяца назад

Hi Spartanez, welcome to my channel. with the comparision of 280 LF2 and LF3. There are big different in temp and if I am to use 420. it will be the same. as in the temperature gap will be just like the 280 LF2 and LF3.

@deuswulf6193 4 месяца назад

This would have been an instant purchase if the pump was actually rotatable. Unfortunately, with a vertically mounted 4090, and the lower offset for AMD CPUs, I don't think it will fit. Tubes down with a side mounted radiator is also a no go.

@KleoYan 4 месяца назад

Hi DeusWulf, welcome to my channel and you are right on the spacing between the hose and a Vertical Mount 4090. Thanks for the feedback.

@deuswulf6193 4 месяца назад

@@KleoYan Second time here =), first was with the Azza Cube breakdown. I appreciate your technical analysis of these products btw. Very informative. Most videos act more as marketing than analysis.

@KleoYan 4 месяца назад

@@deuswulf6193 Hi, welcome back. Honestly speaking. In most of my content, they are either guides or to talk about my experience of a PC Builder. You see, we PC Builders want to know in-depth info before purchasing a product. I might not be perfect but am trying my best to see in every aspect of a sponsored PC product. Another principle I have is, whats good I will talk about it and what's bad, I won't hesitate to talk about it. Thank you for your valuable feedback and I greatly appreciate it. Your kind words will motivate me to continue to improve my content. Another fact on doing content is to polish the way I speak and to present as this is required at my main job. RU-vid is just my learning playground 🤣

@roiranger 15 дней назад

still hard to mount for amd5.. good radiator but not recommended because you'll have a hard time mounting it.. :((

@KleoYan 15 дней назад

@@roiranger hi and welcome to my channel. I get a lot of feedback on this. I guess the key point is the grip. Thank you for your feedback.

@Starwarsxmarvel 13 дней назад

Hi so got this aio but 3rd fans rgb not working any idea how to fix

@KleoYan 13 дней назад

Hi Starwarsxmarvel, welcome to my channel. where did you plug the daisy chained 3pin 5v ARGB Connector of the fan to? If it's directly to your motherboard, double check the argb connection of the fans and if you plug to a argb/fan hub, which has 8 to 10 port.. you can't daisy chained and plug to 1 port. you will need to split up the fans and plug them in individually.

@Starwarsxmarvel 13 дней назад

@@KleoYan I plugged it directly into motherboard

@Starwarsxmarvel 13 дней назад

Also I did the 3 seperate connections not one canle

@Starwarsxmarvel 13 дней назад

What do you mean by double check the argon connection

@KleoYan 13 дней назад

@@Starwarsxmarvel the radiator side where the tubes are. There is a 3pin 5 volts connector which sticks out from the tube sleeving (I will call it connector A) Unplug your fans 3pin 5V. Test out individual by plugging your fan ARGB to connector A. Connector A is not long enough, you can remove a fan at one time from the radiator and to test it. This is to narrow down if the fan ARGB is faulty or not. If it is, contact seller or Arctic to have your unit change.

@graved1gger 3 месяца назад

Ahahahhaha. "Can't hear the pump". At 100% my lf3 pump resonates with the motherboard and a bit with the rad itself. But on top of it pump rattles as crazy (not the bubbles but actual rattle). And I'm not the only one according to reddit threads. Arctic itself ignores the ticket. I'm very disappointed since I already have LF2 and essentially got lf3 for looks.

@KleoYan 3 месяца назад

Hi Anton_s, welcome to my channel. So sorry to have hear your experience. I didnt have these issues on both LF3 which is provided by arctic or the ones which are purchased.

@d4nith3 4 месяца назад

Why u dont install AC unit into ur house?

@KleoYan 4 месяца назад

Hi CoDWolfPete, welcome to my channel, thank you for the question, cos I am poor, that's why. ok Kidding, I do have AC at home but wanted to do content that is base on natural weather in a tropical country.

@d4nith3 4 месяца назад

@KleoYan impressive how u can resist 30°C In EU we are dead at 28°C 💀

@KleoYan 4 месяца назад

@@d4nith3 it’s common here in Singapore. We do have fan to cool us down but during content creation. I will off it to reduce the background noise. If you have not noticed, look at my arm, I am perspiring when illustrating how to mount the cold plate on the Intel processor. 😂

@d4nith3 4 месяца назад

@@KleoYan i noticed it. 😅

@shivang0017 4 месяца назад

Bro please make a video on 7950x with Deepcool ak620

@KleoYan 4 месяца назад

Hi Shivang001, welcome back to my channel, your request is in my list but that will be AK620 Digital. It won't be that fast as I have to focus on my work first. thank you for the suggestion.

@evan2447 4 месяца назад

This doesnt work on a msi b450m bazooka and a ryzen 5 5600x unfortunately. Sad I cant use this.

@KleoYan 4 месяца назад

Hi Evan, welcome to my channel. you can use the black version without ARGB and if you fancy ARGB, you can always get an argb controller for the argb effects.

@toonnut1 3 месяца назад

Limiting the wattage means the aio is not fit for purpose!

@KleoYan 3 месяца назад

Hi ToonNut1 ToonNut007, welcome to my channel. the AIO is fit to drive at default, it's just that my room temperature is always sitting at 30 to 31 °C, therefore be it using AMD or Intel platform I will not drive the wattage that high.

@toonnut1 3 месяца назад

@@KleoYan OK 👍

@KleoYan 3 месяца назад

@@toonnut1 you are most welcome and all the best with your build too. 😉

@princeprefa9002 2 месяца назад

As easy as it looks it is very difficult to mount

@KleoYan 2 месяца назад

Hi prince prefa, welcome to my channel. Yes, alot did message me and told me that. I guess is up to individual and the key point is to support before mounting, let gravity does it's job. If you observe carefully, I rest my whole palm on the ram slots which give me a steady platfrom when I am holding the AIO Pump block, also the anchor points of my fingers which covers the back, middle and front, then I screw the block in. If you observe what other reviewers are doing, they hold by the back or even at the radiator hose, which gives unsteady or unfirm grip on the AIO block. That's why to me is easy as I just let gravity does it's work.

@mrniceknight 4 месяца назад

im having a hard time mounting this on amd holy shit

@KleoYan 4 месяца назад

Hi mrniceknight, welcome to my channel , I believe I have illustrated in this content. What is needed is just come balance and firm grab of the AIO block.

@Ttblondey 4 месяца назад

It's worth having LF3

@KleoYan 4 месяца назад

Hi M.Indra Soyat, welcome back. To me very worth getting, especially for AM5 platform.

@Ttblondey 4 месяца назад

@KleoYan agree. Not regret getting one for myself

@KleoYan 4 месяца назад

@@Ttblondey congrates and enjoy. 😉

@Parkybob11 3 месяца назад

Idk why but i just bought a liquid freezer 3 and im scared its gonna leak and ruin all my parts

@KleoYan 3 месяца назад

Hello Parkybob, welcome to my channel. Inspect the liquid AIO. Have a feel of the tubes and look at their joints. You should be ok. Don’t worry that much.

@Parkybob11 3 месяца назад

@@KleoYan okay 👍

@KleoYan 3 месяца назад

@@Parkybob11you are most welcome. All the best with i your build too 😉

@Parkybob11 3 месяца назад

@@KleoYan appreciate it, much love

@d-gaming3354 4 месяца назад

Such a hot guy! 🥵

@KleoYan 4 месяца назад

Hi D-Gaming, welcome to my channel and yes it's real hot as illustrated, that's why I promote a very practical desk fan. 😉

@TheRealFenwick 4 месяца назад

That pump is so loud! Even without fan

@KleoYan 4 месяца назад

Hi jake, welcome to my channel. thank you for your feedback. Alot talking about it and I have tested another unit which was purchased off shelves. both which is one provided by Arctic and the one which I have purchased. I don't feel it's loud.. maybe is due to individual sensitivity in hearing.

@numb6686 Месяц назад

How is it possible to make a 52 minutes video out of a cooler Installation, unboxing and so on... no one saw the whole video, right?

@KleoYan Месяц назад

Hi NUMB, welcome to my channel. Some who are interested to know everything will watch and some just wanted some key points, they will look for the time stamp which I’ve created. So it’s your choice to watch full or just point to point.

@gregwillis4001 Месяц назад

@@KleoYan Thank you, I watched the review, then circled back a couple of times for reference of different points

@KleoYan Месяц назад

@@gregwillis4001 hi and welcome to my channel. Hope this content did aid you and thank you for your feedback. Btw how did your mounting went?

@marklong982 3 месяца назад

Bro, while I appreciate you taking the time to make this video, your method of installing the pump still doesn't work for me. In the end, it was lots of effort(and grunting and sweating and cursing) just to install it.

@KleoYan 3 месяца назад

Hi Mark Long, welcome to my channel. Yup a lot ask me this question and mentioned that I mount this not inside a case. Maybe is just steady hands and I tried both outside and inside a case. I have no issues with it. Still thank you for your feedback.

@Jackierose669 Месяц назад

This piece of junk is nothing but misery to install. I'm really close to shipping it back.

@KleoYan Месяц назад

Hi Jackie Rose, welcome back. So sorry to hear that. I guess is better off for you to return this unit and to get something which you are happy with.. by the end of the day, no point to have compromises. Wish you all the best with your next Liquid AIO.

@DETERMINOLOGY Месяц назад

Work on mic control. Noisy mouth in other words

@KleoYan Месяц назад

Hi DETERMINOLOGY, welcome to my channel and thank you for your feedback.

@vladophilip 3 месяца назад

its ugly

@KleoYan 3 месяца назад

Hi u kosku, welcome to my channel. I guess each has their own liking. Nevertheless, thank you for your feedback.

@vladophilip 3 месяца назад

@KleoYan Thank you for reply. As you already know, your channel has great and informative content. Big hello from Serbia.

@KleoYan 3 месяца назад

@@vladophilip hi, thank you and you are most welcome. 👍

@PortoFellazTV 2 месяца назад

great video man

@KleoYan 2 месяца назад

Hi Porto Fellaz Records, welcome to my channel and thank you for your kind words.😉

@schifoso Месяц назад

Very noticeable pump whine when the pump turbine runs at full speed. Radiator plus fans is thick. If you top mount this you'll need a tall case to clear the motherboard.

@KleoYan 29 дней назад

Hi Robert Zanatta, welcome to my channel. For the pump noise along with the VRM fans, yes they are not as quiet as the Liquid Freezer II and you are right about the clearance. It's a similar situation with LF2. Infact in most of my case reviews, I always take Liquid Freezer II to measure the clearance. Once again thank you for your feedback and to have visited my channel. 👍👍👍