Montech KING 95 PRO - Part I [Case Details]

Подписаться 11 тыс.

Просмотров 17 тыс.

50% 1

#montech
Montech have crafted a very unique and elegant mid tower chassis. It's pack with features.I have been fiddling with it for days and will like to share my experience.
Credit With Thanks
================
Montech Official Website - www.montechpc.com/en/
Montech King95 / King95 Pro - www.montechpc.com/en/products...
[On Sale] at Tech Dynamic Singapore
==============================
Shopee - King 95 / King 95 Pro shopee.sg/product/32559623/24...
Lazada - King 95 / King 95 Pro www.lazada.sg/products/i29543...
[On Sale] at Newegg
=================
KING 95 Black - www.newegg.com/black-montech-...
KING 95 White - www.newegg.com/white-montech-...
KING 95 Prussian Blue - www.newegg.com/prussian-blue-...
KING 95 Red - www.newegg.com/red-montech-ki...
KING 95 PRO Black - www.newegg.com/black-montech-...
KING 95 PRO White - www.newegg.com/white-montech-...
KING 95 PRO Prussian - www.newegg.com/prussian-blue-...
KING 95 PRO Red - www.newegg.com/red-montech-ki...
SG Affiliated PC Hub (In Singapore)
============================
Carousell www.carousell.sg/u/CyberCyphe...
Shopee Online shopee.sg/cybercypher.compute...
PC Pricelisting in Singapore www.cybercyphercomp.com/
Track: VOLT VISION, BRIGHTDVWN - Hide Your Heart [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • VOLT VISION, BRIGHTDVW...
Free Download / Stream: ncs.io/hideyourheart
Time Stamp
==========
00:00 | B-Roll
00:56 | Intro
01:22 | King 95 Pro available colours
01:33 | The structure and craftmanship
03:03 | Tempered glass pannels
03:19 | Front I/O buttons and sockets
04:02 | Side mesh panel
04:18 | Rear features
06:55 | Measurements
07:20 | Bottom dust filter
07:57 | Removal of top panel
09:28 | Removal of side tempered glass
11:13 | Remove of front tempered glass
11:58 | Remove of side metal panel
13:10 | Craftmanship on the tempered glass panels
14:13 | Difference between KING 95 and KING 95 Pro
14:29 | Motherboard arragement
14:36 | Build in rubber grommets
14:42 | Fan arragenment
15:17 | Pre installed fans of a KING 95 PRO
15:46 | Liquid AIO arrangement
16:01 | Bottom fan screw mounting points
16:41 | Add-on feature for more storage at the bottom
20:08 | Add-on feature to convert front tempered glass to a mesh panel
20:33 | Converting side fan tray to the front
23:49 | Removal of top fan/radiator tray
25:43 | Illustration mounting a Liquid AIO at the top
30:00 | Ram clearance
30:27 | Illustrating to mount a Liquid AIO at the side
30:52 | Illustrating on Push Pull Configuration (Side)
31:43 | Illustrating to mount a Liquid AIO at the front
33:03 | Illustrating on Push Pull Configuration (Front)
34:16 | Mounting GPU Vertically
36:49 | Aircooler placement and height limitation
38:22 | Other side of the panel
38:29 | Swivel tray and removal of the whole tray
39:33 | Function of the swivel tray
40:40 | Valcro strips for cable management
40:53 | PSU Mounting and measurement
41:44 | Swaping location of the HDD Cage with PSU
43:32 | Total storage capacity
45:43 | ARGB & Fan Hub
47:10 | Cable connection between front I/O to the motherboard
48:01 | In-Depth of the ARGB & Fan Hub
51:37 | The accessories
53:22 | Conculsion & End

Наука

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 413

@noxmu4715 8 месяцев назад

After watching yours, I tried other reviewers who did this case. None have spoken with so much details like you did. Kleo what are you made of. You seems to read what we wanted. Thank you again for putting so much effort and to present another excellent case review. You are still the BEST 😍

@KleoYan 8 месяцев назад

Hi Nox, welcome back and thank you for your kind words. Greatly appreciated it. I am glad you like my content 😉

@righteous_side_of_hell 8 месяцев назад

@@KleoYan Agreed. This is the first KleoYan video I have seen and is the most thorough, well though out video I have seen in a very long time. Congratulations. You deserve more recognision, which I'm sure will come.

@KleoYan 8 месяцев назад

@@righteous_side_of_hell hi and welcome to my channel. Thank you for your kind words 😉 I am glad you like my content and there will be a part 2 about this case. Which will be the thermal performance which i intend to release this weekend. Hope to see you again and thank you.

@KleoYan 8 месяцев назад

hmm Rhino, since you are pretty new to my channel, I like to share with you this method of applying thermal paste. my viewers who tried, they have gotten good thermal results. now am not advertising on Arctic MX6, but I have applied this method when thermal paste have high vicosity. You might want to give it a try ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xZ2R4roF1_Q.html

@The_Pariah 5 месяцев назад

@@KleoYan I'm in agreement with noxmu. You covered many details, including the couple I was looking for that no one else talked about. Fantastic job.

@nerdyperson9939 Месяц назад

Life saver, honestly the first time ive dealt with something this complicated. Your thorough explanations and advice really really helped. Thank you.

@KleoYan Месяц назад

Hi Nerdy Person, welcome to my channel. I am glad to of help. All the best with your build too. 😉

@B0SN1A 6 месяцев назад

Video single handedly, sold the case for me. Easy decisions ty

@KleoYan 6 месяцев назад

Hi B0SN1A, welcome to my channel. Thank you for your valuable feedback.. All the best with your build in this new chassis.😉

@travistuckerSB 8 месяцев назад

Really amazing detail and much appreciated. There are always tons of reviews and build videos on cases but nobody else on YT gets this deep into clearances for various configurations. Well done!

@KleoYan 8 месяцев назад

Hi Travis Tucker, welcome to my channel. I am glad you like my content and thank you for your valuable feedback. All the best with your build too 😉

@christianl3592 Месяц назад

Man, I’m impressed and glad to find your review videos for all that is trending regarding PC builds! I definitely love the level of details you share that other reviewers miss and are important for the consumer trying to figure out what to pick in order to have a well balanced and efficient build. This case for sure takes the cake in my book, even over Lian Li’s Evo RGB. All that it brings and accommodates has definitely secured my case election. What I was specifically looking for was the hub configuration and logic that others didn’t mention. Thank you so much, great work!!! I’m actually surprised your channel isn’t at half a mil subs at least. But for sure, I wish you the best and hope you reach extraordinary audience levels.

@KleoYan Месяц назад

Hi Christian L, welcome back and thank you for your valuable feedback. I am really glad you like my content. Again thank you for your kind words 👍👍👍 all the best with your build too 😉

@roberttrifts2737 7 месяцев назад

Your comments and review of the ARGB fan hub and the Front Panel reset switch are *highly useful* as the Case manual is very unclear about these two aspects. When building, I had to check this video to get my fan hub ARGB working correctly. Thanks!

@KleoYan 7 месяцев назад

Hi Robert Trifts, welcome to my channel and am glad this content did aid you. Thank you again for your kind words 😉

@wingnut4200 7 месяцев назад

EXCELLENT review. Best review of any case ever. You explained things I didn't even think about before. I will buy this case because of the features you presented. I have seen a half dozen reviews on this case and only you focused on the details. And they matter most. Nice to know about these details BEFORE owning and living with the case. Thanks.

@KleoYan 7 месяцев назад

Hi Wing Nut, welcome to my channel and thank you for your valuable feedback. You might want to watch part II too “Montech KING 95 Pro - Part II [Thermal Test]” ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html. All the best with your build 😉

@BartFlossom 7 месяцев назад

I was impressed with this case a month ago when I first discovered it. I am equally impressed with your review, Mr. Yan. You taught me things about this case that I didn't know even after I built my system yesterday. You're doing great work. I look forward to seeing your Sonic motherboard in this case. 👍

@KleoYan 7 месяцев назад

Hi Bart Flossom, welcome back and thank you for your kind words. I am glad you like this content and I learn something from you too, as you've gotten two standard fans just for the front to show the ARGB rings 👍. Thanks again to have shared with me, greatly appreciated it.

@kagoojin7199 Месяц назад

No one has given more details. Amazing work bro

@KleoYan Месяц назад

Hello Kago Ojin, welcome to my channel and thank you for your feedback and there is a part II which might interest you Montech KING 95 Pro - Part II [Thermal Test] ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html

@user-dx5tu6yz7t 8 месяцев назад

Thank you for such a great detailed review. I love that you actually show clearance examples rather than just a blank statement. I think I just found my new case (non PRO version) and have some extra $$ left over!!

@KleoYan 8 месяцев назад

Hi Mr. T Cas, welcome to my channel. I am glad this content did aid you. Thank you for your valuable feedback and all the best with your build too 😉

@jpa207 7 месяцев назад

Obligatory thumbs up for yet another great detailed review. Keep up the good work!

@KleoYan 7 месяцев назад

Hi jpa207, welcome to my channel and thank you for your feedback. I will try to bring better content in furture. thank you again for your motivation. 😉

@B1GL3G3ND 4 месяца назад

This was a well explained in so much detail. Much better than any other videos I encountered, love the way you do the content, keep it up !

@KleoYan 4 месяца назад

Hi B1GL3G3ND, welcome to my channel and thank you for your valuable feedback, greatly appreciated it. All the best with your build too.. oh btw, there is part II which might interest you ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.htmlsi=ruwgQRyZ4fMHqNGk. Thank you again for your kind words 😉

@Benezeel 8 месяцев назад

Damn man! This is the best produckt reweiw what i have EVER seen! This much detail is maybe can overvelming for sb. but its perfect for my needs. Thank you! Keep up the awesome work!

@KleoYan 8 месяцев назад

Hi BENEZEL, welcome to my channel and thank you for your kind words. I am glad you like my content and all the best with your build too 😉

@Mahavir_lol 21 день назад

Thank you for going into detail of the case fan/RGB hub. There were no explanations about it in the manual and I was not sure how to manage the cables there.

@KleoYan 21 день назад

Hi Mahavir, welcome to my channel. Hope this content did aid you out. All the best with your build too. 😉

@ronswanson1410 8 месяцев назад

That bottom storage SSD tray is a nice touch for some reason that just makes all the sense in the world to me.

@KleoYan 8 месяцев назад

Hi Ron Swanson, welcome back and thank you for your feedback. yup it does, I underestimated this chassis when I saw it on computex, but when I start to fiddle with it. I am amazed by how it's constructed. Every single piece in this chassis is with a feature and it function well. Just impressive!

@universemaster100 8 месяцев назад

Just an awesome and beautiful case

@KleoYan 8 месяцев назад

Hi BlitzZR, welcome back and yup it’s another beautiful case indeed. I am more amazed by the feature set 😊

@jurgens.9029 2 месяца назад

Nice review with much more details than in all other videos i`ve seen before.

@KleoYan 2 месяца назад

Hi Jürgen, welcome to my channel and thank you for your feedback. Infact in most of my case open view, I will think of myself being the PC Builder before I create a case content. Reason for this, many of us will want to know those important factors as what's the case capability and it's limitation. I am glad you like my content and all the best on your build too. 😉

@trsskater 4 месяца назад

Dude you are so beyond appreciated! Thank you so much for such a thorough review /overview/ breakdown / teardown /build guide / manual.

@KleoYan 4 месяца назад

Hi trsskater63, welcome to my channel. I am glad you like my content. by the way, there is part II which you might be interested ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.htmlsi=cTMSK6Wkf9NkOLog. Once again thank you for your kind words and greatly appreciated it.

@trsskater 4 месяца назад

@@KleoYan Oh I saw it and I was pleasantly impressed and happy to find someone who reviews to this extreme. Also do you think this case would provide enough cooling when paired with a 7800x3d and an rtx 4090 or should I stick with a O11D and its look alikes?

@KleoYan 4 месяца назад

@@trsskater Both chassis will cater to your needs, all is needed is to set your fan curve properly and you will be all good 😉

@trsskater 4 месяца назад

@@KleoYan You just saved me a ton of money. Haha. Thank you!

@KleoYan 4 месяца назад

@@trsskater you are most welcome. All the best with your build too 😉

@TableTopBiker 6 месяцев назад

Great video man. Answered so many of my questions. Subscribed for sure!

@KleoYan 6 месяцев назад

Hi TableTopBiker, welcome to my channel and thank you for your feedback, greatly appreciated it. All the best with your build too.

@matsverheyen1176 20 дней назад

I bought the case yesterday before i saw this and coming in today, nice review!! it is gonna make my install a lot easier😍

@KleoYan 20 дней назад

Hi Mats Verheyen, welcome to my channel. I am glad you will find this content useful, you might be interested in part II ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html and just to share, I have not done part III but this is how it looks like www.reddit.com/r/MontechPC/comments/19esupr/project_montech_king95_pro_sonic_the_hedgehog/

@swizzler8053 8 месяцев назад

Really like this case. I just bought the gamdias neso p1. Its amazing. Its like a hyte y60 but with way more cooling options and less plastic. Keep up the great work and stay safe.

@KleoYan 8 месяцев назад

Hi Swizzler 80, welcome back. Nice, that is another good case. Thanks for sharing 😉

@blueboijeric 7 месяцев назад

this is by far the most detailed review 👌

@KleoYan 7 месяцев назад

Hi jeric_b, welcome to my channel. Thank you for your valuable feedback, you might be interested in part II, thermal test ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.htmlsi=MdOJIkjpz8n90bI3

@TheRockProfessor 5 месяцев назад

The best review! Thank you! ❤❤❤

@KleoYan 5 месяцев назад

Hi Илья Королёв , welcome to my channel and thank you for your feedback. All the best with your build too! 😉

@fabelius3191 6 месяцев назад

The detailed information is very complete. Awesome.

@KleoYan 6 месяцев назад

Hi FaBelius, welcome to my channel and thank you for your valuable feedback. 😉

@LockieNZ 2 месяца назад

Excellent deep dive on the case. 👌

@KleoYan 2 месяца назад

Hi Adam Lockington, welcome to my channel. Thank you for your valuable feedback and all the best with your build too.

@Crombe76 4 месяца назад

Awesome case

@KleoYan 4 месяца назад

Hi C H-B, welcome to my channel. Yup it’s a good case and just to share, this is the final build www.reddit.com/r/MontechPC/s/r9cr4GtTYE

@lionoh 7 месяцев назад

A most excellent review,by far the best thorough one of this case above all other reviewers. Some other review mentioned that this case had to many hard drives slot's. Was a nice chuckle,I rather have more than to little. The way the ssd's slot's are placed through out the case with the added tray such consideration.

@KleoYan 7 месяцев назад

Hi Alex Lion’Oh, welcome to my channel and thank you for your valuable feedback. There is part II which talks about the thermal which you might be interested in ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html 😉

@tustinsystems 4 месяца назад

Good job explaining the details and options of this case.

@KleoYan 4 месяца назад

Hi Tustin Systems, welcome to my channel and thank you for your feedback and all the best with your build too 😉

@deannatrois1 7 месяцев назад

Brilliantly detailed explanation how the case works, looked at lots of sites, this one is the best. Totally love the Montech Kind 95 Pro, having bought replacement ARGB fans for a 'cheaper' case, you actually save money with the pro version. Best case ever. Easy to build a new pc, they have really thought the design through. The other case is being returned lol. Bit worried aboiut my Deepcool LE 720 AIO though lol, not sure there will be space for it. Will update in a few days. Wish I had listened to this vid first! I have a Rog Strix z790-E wifi mobo which does have a flush heatsink. But the DeepCool LE720 is 50cm deep so it might just fit. No idea how it will perform though in comparison to the Artiic II. I couldn't use the Artic fan as apparently it causes frequency problems with the mobo (only found this out after buying the mobo, purely by chance as compatability issues were raised elsewhere - there is a long list of mobo's that have compatability issues). I do love the mobo so will try to work with it. This build is proving to be quite difficult lolol. But very grateful for the detail provided in this channel as I wouldn't have even known such problems could exist in advance of the build. No other site even hints at this.

@KleoYan 7 месяцев назад

Hi Helen Joberns, welcome to my channel and thank you for your feedback. Things does not stop here. You might be interested with its thermal thermal test ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html 😉 once again thank you.

@roberttrifts2737 7 месяцев назад

I found your channel only through searching for the product. Your review was thorough AF. Well done sir. Your review was so thorough, I subscribed. My only complaint was suggesting mounting a radiator on the side with hoses at the bottom of the case so that the pump is above it. While it will work, it will cause additional stress to the pump and will eventually cause a pump failure *much sooner* than it would fail otherwise.

@KleoYan 7 месяцев назад

Hi Robert Trifts, welcome to my channel and thank you for your valuable feedback. greatly appreciated it. As for the hose, it only i have space when doing horizontally, I would, I can only do it when it's vertically mounted. Nevertheless, thank you.

@remingtonklein8234 3 месяца назад

Thank you so much for explaining the cables for their RGB hub. I was having trouble finding information of where to plug the 4 and 3 pin cables (my first build).

@KleoYan 3 месяца назад

Hi Remington Klein, welcome to my channel and I am glad you find this content useful, Just some additional info for the LED Switch.. you can refer below 😉 【Switch lighting mode】: press the LED button to switch between different lighting mode 【Turn off the Lighting】: Press the LED button for 5 seconds until the lighting is turned off. 【Sync with the motherboard】: Connect the ARGB wire(5V) onto the motherboard, press the LED button for 3 seconds

@ZenMotionSim 6 месяцев назад

really good video - best review of this case on YT. just orderem mine and waiting for it...

@KleoYan 6 месяцев назад

Hi Zen Motion Slim, welcome to my channel and thank you for your valuable feedback. This might interest you too. The thermal test of this case ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html . Once again thank you and all the best with your build too. 😉 by the way, this is my final build in this chassis www.reddit.com/r/MontechPC/comments/19esupr/project_montech_king95_pro_sonic_the_hedgehog/

@ZenMotionSim 6 месяцев назад

@@KleoYan yeah, I’ve seen the other one as well 👌 good to know that 1200 psu fits as i see on the photos. Great build! 🫡👊

@KleoYan 6 месяцев назад

@@ZenMotionSim thank you. I have to remove the front side swivel tray to fit the 1200 PSU. so ya. take note on that.

@ZenMotionSim 6 месяцев назад

@@KleoYan that’s fine. I just need to fit 2 3,5” drives and one 2,5 ssd which all go above psu. I believe the ssd goes on the outside of that disk tray. 360 aio on top.

@KleoYan 6 месяцев назад

@@ZenMotionSim that will be fine 👍btw do share with us your build once it’s done 😉 post it at Reddit www.reddit.com/r/MontechPC/s/pKPFnCh56e thank you

@donwon199 3 месяца назад

Just received mine from Scan, in the uk and only paid £113 for it. I have to say I’m very impressed with this case and also this video, which has basically answered all my wiring Questions. Thank you x

@KleoYan 3 месяца назад

Hi Donnie Cooper, welcome to my channel. Congrates in choosing this case. You going to have lots of fun with your build. I am glad this content did aid you in someways. hey once it's done, maybe post some pics at Montech Reddit forum www.reddit.com/r/MontechPC/ and to share it with us 😉

@donwon199 3 месяца назад

@@KleoYan Will do.

@KleoYan 3 месяца назад

@@donwon199 thank you. 👍👍👍

@Reavl 8 месяцев назад

nice video!! love the intro!

@KleoYan 8 месяцев назад

Hello Roong, welcome back and thank you for the compliment 😉

@bergdk237 7 месяцев назад

Montech king 95 pro the value KING🔥 this is on my wish list for 2024!

@KleoYan 7 месяцев назад

Hi BergDK, welcome to my channel. Good to hear, you will love this case for sure 😉

@MikeBob2023 7 месяцев назад

This is a truly *AWESOME* review. It's very thorough and comprehensive (and your English is excellent, by the way). *Thank you* for thoughtfully providing so many details. 🙏🏻🤗🏆 I purchased the *Montech King 95 Pro* (in Gentleman Black) earlier this week, and it is scheduled to arrive tomorrow. (I'm so excited!) I think it's one of the most well designed and crafted cases I've ever seen, and I can hardly wait to build in it. 🙂 /subscribed! 👍🏻

@KleoYan 7 месяцев назад

Hi Michael Bobczynski, welcome to my channel and thank you for your valuable feedback. Glad you've gotten this case and dont miss out on this which might interest you Montech KING 95 Pro - Part II [Thermal Test] ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html

@Carrillo91 7 месяцев назад

Deserves a like from me! I'm embarrassed I have this case and forgot there's the button for the RGB until I watched this.......... 🙃🙃 Thank you! lol

@KleoYan 7 месяцев назад

Hi Anthony Carrillo, welcome to my channel. Thank you for the like and this might interest you too. The thermal test of this case ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html

@Carrillo91 7 месяцев назад

@@KleoYan Just watched! Awesome content - please keep making more! :)

@KleoYan 7 месяцев назад

@@Carrillo91 you are most welcome and so long as I have new products to play with, I will continue to do more content. Thank you again for your feedback😉

@user-ex5tk8me3q 6 месяцев назад

Well done with your review. Very helpful!

@KleoYan 6 месяцев назад

Hi Stephen K, welcome back and thanks again for the feedback. I am glad you like the content and all the best with your build too 😉

@GavstarLeo 4 месяца назад

Good in-depth video with plenty of information. I have my eye on the Liquid Freeze III RGB and was hoping you could clarify if it will fit inside this case

@KleoYan 4 месяца назад

Hi Gavin W, welcome to my channel. If it’s of 360 LF3. Yes you can fit in this case at the top.

@evanwheeler7687 8 месяцев назад

Greetings from the US! Love your content because of your immaculate attention to detail. This is a very solid alternative to the O11 Evo. Also, do you know whether Lian Li intendto release a new O11 Mini?

@KleoYan 8 месяцев назад

Hi Evan Wheeler, welcome to my channel and thank you for your valuable feedback. As for the 011 mini version from Lian Li, this I have not heard of anything yet, only know they are busy doing the LCD fans at the moment which will be releasing soon.

@birdsoup777 3 месяца назад

At Micro Center yesterday shopping for a case. Almost bought it. Materially, King 95 felt quality and sturdy. I cannot believe its 100 dollars. Decided on DeepCool Morpheus. It fit my planning. You should see a case before you buy it. I would recommend the Monech King 95 budget or not, depends on your plan for building a systems.

@KleoYan 3 месяца назад

Hi birdsoup777, welcome to my channel and greatly appreciated your feedback. 😉

@pengful 5 месяцев назад

Thanks, Kleo. Great review of the Montech King 95. Regarding the vertical GPU mount, which brand/ make did you use for this video?

@KleoYan 5 месяцев назад

Hi Derek Peng, welcome to my channel. Am using the prototype VGM kit from Montech. Is not out yet. If you want to, you can grab cooler master v3 kit. Which a number of response that it’s good and sturdy.

@jielibai2912 8 месяцев назад

I wonder if you can install a radiator on the bottom of the case even though it doesn't say you can? I can see a 360mm would have issues unless it was maybe a slim one? But I don't see why rads wouldnt work on the bottom as long as you can use one of the fan slots to screw it down.

@KleoYan 8 месяцев назад

Hi jieli bai, welcome to my channel. Yes you can mount a 360 rad but it does not allow flexibility to move the rad like some other cases where you have a rail type of mounting.

@NGreedia 5 месяцев назад

very nice case. just wish they had a smaller, mATX version with a footprint of a Zalman p30 or even smaller if possible at under 40L. Another thing is like most other cases, the 140mm fans are partially blocked as the mounting points block the sides of the fans to accomodate mounting holes for 120mm fans.

@KleoYan 5 месяцев назад

Hi NGreedia, welcome back. I have the same thought too as in smaller foot print, but it’s going to be tricky 😂Thank you again for your valuable feedback 👍

@silfrido1768 4 месяца назад

easily top 3 cases of all time....

@KleoYan 4 месяца назад

Hello Silfrido, welcome to my channel and thank you for your feedback. I am curious, which is your two other chassis which are at top 3?

@silfrido1768 4 месяца назад

@@KleoYan when it comes to looks & performance Montech wins over every case. It is easily top 1 for me. I don’t think I can compare any other case to this one because it not only performs, but it also looks very good & the build quality is insane. The trick is to switch out the stock fans for high performance fans. my 4090 stays at 37-39c while idle & 40c while gaming in 1080p low with the mesh front panel on. There’s nothing to dislike about this case. - 420mm of gpu clearance - can house a 4090 no problem - psu is not on the bottom of the gpu & instead in the back - options to use a mesh or glass front panel - can house up to 13 fans if you do a push pull config either at the top or front with a rad - can vertical mount any gpu - a lot of ventilation - good build quality overall - cable management is easy There’s legit nothing to dislike about this case… this is hands down the best case ever made. no other case will give you the same thermals as this one. none of them

@KleoYan 4 месяца назад

@@silfrido1768 I see. You are right about the thermal. Infact I don’t even need to put 13 fans. Just need the right tuning for airflow at low rpm 😉

@silfrido1768 4 месяца назад

@@KleoYan yea, you don’t really need all 13 unless you live in hot climate. you can get away with 6-8 fans. I’m just pleased to see another company change things around & actually do things the right way for once. This is the first time in history that a case manufacture actually got ventilation done correct. and the fact that this case is on sale rn for 109$ in white makes it even more appealing. The black is on sale for 89$ ( non pro version ). It performs, it looks amazing, and it doesn’t break my pockets ? top 1 case of all time lol. I wish I was able to show you my build

@dwaynecarter85 7 месяцев назад

@Kleo Yan thx for the nice and informative video. i only have a RGB 12V on my mainboard. how can i connect the 5V ARGB from the hub?

@KleoYan 7 месяцев назад

Hi Fenris, welcome to my channel, you don’t need to plug the 5V 3pin ARGB cable from this case to your motherboard. The case fan/ARGB hub is a controller. You can use the ARGB button of this case to cycle the ARGB effects. So long your ARGB fan’s connector is plug to this case fan/ARGB hub.

@fades143 4 месяца назад

hi, I’m going to build my first pc soon and I have questions about the case fans. 1st: The two sata connectors coming from the fan hub are for rgb and the fans correct? also do I plug my sata cables into my psu then the sata cables from the fan controller into them? 2nd: where do the other 2 cables that go into the motherboard need to go? thank you

@KleoYan 4 месяца назад

hello Fades!, welcome to my channel. That's correct each sata is to provide power to PWM and ARGB, as how to connect will be PSU to the PSU Sata cable, then plug the Montech hub to the other end of the PSU sata cable. for the other 2 cables which is one for ARGB and one for PWM. for argb is you intend to make user of your motherboard argb utlity to control the argb effects, then plug it to your argb motherboard header. as for the fan, plug it to your motherboard fan header. I would advise to do this. for liquid AIO or Air cooler, plug your fans directly to motherboard CPU_FAN as for case fans like CHA_FAN or SYS_FAN, then plug the fan PWM connector from the hub to it. just make sure you know which you plug as it controls the RPM of your fans.

@kalebcoleman7474 7 месяцев назад

I feel like if u had the flow front panel u could fit 6 x p14 artic fans, 1 x 120 mm fan and the artic 280mm aio in the f1 config u have in your termal video. Whats your thoughts?

@KleoYan 7 месяцев назад

Hi Kaleb Coleman, welcome to my channel. F1 configuration here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.htmlsi=JUGKoE4O88lg7dok&t=2015, your side tray will be moved to the front and you will be mounting your liquid AIO on the side panel which is not possible. maybe you should break down what you are trying to describe as i don't really fully understand you. refer below. Just an example. Top - 2 x 140mm radiator case fans Bottom - 2 x 140mm case fans Front - 2 x 140mm case fans Rear - 1 x 140mm case fans

@fuzzylogic888 5 месяцев назад

Very detailed. Great video. I have a question. I bought the pro version of the case and plugged the ARGB connector to the ARGB header on my Asrock z790 RS but the colour of the LED fans don't cycle through the RGB palette but just stays on 1 colour. Any advice what I need to do here?

@KleoYan 5 месяцев назад

Hi fuzzylogic888, welcome to my channel. make sure you have the argb cable of the case controller plug to the argb header on your motherboard, install polychrome. now all is needed is this click on the case LED button. 【Switch lighting mode】: press the LED button to switch between different lighting mode. 【Turn off the Lighting】: Press the LED button for 5 seconds until the lighting is turned off. 【Sync with the motherboard】: Connect the ARGB wire(5V) onto the motherboard, press the LED button for 3 secondsLED.

@fuzzylogic888 5 месяцев назад

@@KleoYan Thanks! Resolved my issue. 👍👍👍

@KleoYan 5 месяцев назад

@@fuzzylogic888 you are most welcome.

@edgardorivera617 3 месяца назад

doesnt the front fans become exhaust now that the fans are pointing out. remember they were intake when on the side.

@KleoYan 3 месяца назад

Hi Edgardo Rivera, welcome to my channel and yes you are correct. That’s why you have to flip them to be come intakes.

@hacgia9524 4 месяца назад

can i front mount a 240mm aio? I plan to use 4 t30 fans on the LT 520. My graphics card is about 282mm long

@KleoYan 4 месяца назад

Hi Hắc Gia, if you intend to do push pull configuration. Just make sure one set of the fans are outside the fan tray and the other set is inside of the tray. Your GPU will be able to fit with no issues.

@Denso481 4 месяца назад

No other review mentioned the clearance problems... thank you

@KleoYan 4 месяца назад

Hi Denso481, welcome to my channel and thank you for your feedback. I am glad you like it his content and all the best with your build too 😉

@DizConnected 5 месяцев назад

I wonder if I can mod this case to fit 2 ITX motherboards. I looks like it can already take 2 PSU. Might make a nice 2 PC stream box in 1.

@KleoYan 5 месяцев назад

Hi Kelly Enlow, welcome to my channel. Though it can hold two PSU but the rear have only one I/O cut out. I have no idea how you going to mod and to fit two itx motherboard. If you do succeed, maybe post some pictures at Montech Reddit. 😉

@vash42165 7 месяцев назад

much much more details compared to other reviewers

@KleoYan 7 месяцев назад

Hi Einclad【SSRB, I am so terrible sorry to reply late. Welcome to my channel and thank you for your valuable feedback. You might be interested in the thermal test of this case ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.htmlsi=YPVu3AgOMX3ZxJLp

@messinjo 5 месяцев назад

Great chase Great review :) what VMG were you using here ?

@KleoYan 5 месяцев назад

Hi Na2 OfficiaL, welcome to my channel. I am using a prototype VMG. Do pardon me that I an able to disclose it till its official. By the way if you wanted a VMG, you can get the cooler master v3. As some of the forum goers have mentioned at Montech Reddit.

@poinguan 4 месяца назад

If I use the front mesh panel with front air intake, where is the filter?

@KleoYan 4 месяца назад

Hello Poinguan, welcome to my channels the front mesh cover is the filter itself. There are no additional filters.

@silfrido1768 4 месяца назад

pro tip... instead of mounting the rad from outside of the bracket, put it through the front bracket first then mount the fans. i can do push pull in the front with my 4090 horizontaly moutnted. and i have the strix btw which is the longest 4090

@KleoYan 4 месяца назад

Hi, Silfrido, welcome back and thank you for sharing your experience. As for me, I might not have your 4090 Strix but am happy with my build www.reddit.com/r/pcmasterrace/comments/19f113a/sonic_the_hedge_hog/ 😉

@silfrido1768 4 месяца назад

@@KleoYan that is one excellent cable management. I give you a 10/10 :)

@KleoYan 4 месяца назад

@@silfrido1768 thank you 😊

@NL_Python 5 месяцев назад

Hey Kleo, great video. Do you think I could use a 4090 Suprim Liquid X in the side radiator location of this case, with the original side fans placed at the front?

@KleoYan 5 месяцев назад

Hi Drama, welcome to my channel and pardon me to miss your comment. I believe you can if the GPU 240 liquid AIO radiator is of a standard size. If you are placing a liquid AIO at the top. The hose have to go to the rear and your GPU liquid AIO hose at the side must be at the top and it will be able to fit without obstruction.

@NL_Python 5 месяцев назад

@@KleoYan thanks a ton for the reply! Keep up the awesome videos, very informative!

@KleoYan 5 месяцев назад

@@NL_Python you are most welcome. All the best with your build too. just to give you the size of a standard 240 radiator 277 (L) x 38 (W) x 120 (H) mm . if your GPU Liquid AIO Radiator is within the size of what I have mentioned. then you will be fine. as the case side tray size is this 316 (L) x 136 (W) x 38 (H) mm

@Bl4ckAngel 7 месяцев назад

Excellent review, you gained another subscriber. However, I leave you with a question. Is it possible to do a push-pull configuration with a 360 AIO on top of the box? Thanks in advance

@KleoYan 7 месяцев назад

Hi Marco Almeida, welcome to my channel. If you are using just the standard 360 liquid AIO that has a height of 53mm (Fan + Rad) you should not have any issues but if you choose to use an Arcitic Liquid Freezer II 360, there will be clearance issues on the side VRM and the Ram height of your motherboard. by the way, don't miss out on the thermal test ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html

@idhamkassim4195 8 месяцев назад

Hi bro nice content....really appreciate you can make review or tutorial on how to setup custom water cooling on Lian LI Evo XL

@KleoYan 8 месяцев назад

Hi Am 84, welcome to my channel. Thanks for the suggestion. Greatly appreciated it, let me see what I can do 😉

@ethancbaker2002 5 месяцев назад

I have one question in this case will the Corsair iCUE H150i Elite LCD XT aio fit in this case? I think so? I’m just unsure if it will fit since you said 60mm is the maximum length to the motherboard. Thank you and Nice explanation

@KleoYan 5 месяцев назад

Hi Ethan Baker, welcome to my channel. I wish I could answer your question but I do not have the device to confirm this, plus the tech specs on their page does not give info about the measurements www.corsair.com/us/en/p/cpu-coolers/cw-9060075-ww/icue-h150i-elite-lcd-xt-display-liquid-cpu-cooler#tab-techspecs your best bet is to ask at Montech reddit forum www.reddit.com/r/MontechPC/

@ethancbaker2002 5 месяцев назад

@@KleoYan thank you and nice comment! I appreciate you a lot!

@KleoYan 5 месяцев назад

@@ethancbaker2002 you are most welcome and so sorry that I can’t answer your question. All the best with your build too 😉

@artosbear 5 месяцев назад

These are really nice appearing cases but I want them to make it a bit bigger to actually accommodate 420mm radiators, atx mobos that have big tall IO covers, and a bit longer so these big cards have more space

@KleoYan 5 месяцев назад

Hi Artos Bear, welcome back and thank you for the feedback. Yup I do agree that if it fits a 420 liquid AIO will be good. As for e-atx. You can mount it but with a limited length and it will cover then side holes where your 24pin is routed.

@kreep2900 7 месяцев назад

I just want to correct a little detail at 46:38, there are only a total of 10 ports for each fan and rgb connector, and you would eventually only have 9 for the rgb port because 1 is used for the case rgb.

@KleoYan 7 месяцев назад

Hi Kreep, welcome to my channel. Thank you for the correction. Infact total is 11 ports exclude the cable which goes to your motherboard ARGB header. After minus off one which is for your case ARGB, that leaves to 10 port on both fans PWM and ARGB.

@lostinseale 7 месяцев назад

You said that the controller can take 11 but I thought it only took 10. Is it 11 because that would be great for my plans for a build.

@KleoYan 7 месяцев назад

Hi Gino Martinez, welcome to my channel. It's my bad as I took out the controller. though there are total of 11 ports but 1 is for the case argb strips, this leaves you with only 10. Terrible sorry about it..

@silvianpopusoi9013 12 дней назад

Can you fit an ASRock B650 Taichi Lite e-atx?

@KleoYan 12 дней назад

@@silvianpopusoi9013 hi and welcome to my channel. You can fit but the side fans might block your cables to pass through and to be plugged to your motherboard. You can move the side tray to the front with replacement of glass to mesh at the front, then that will give you sufficient space.

@user-sq9ie3gc5f 7 месяцев назад

Dear Kleo: I am so glad to see this video and I also get a King 95 pro(white version) to build my new computer. But I got in a trouble: When I try to use a original Montech VGM to mount my GPU vertically, the PCIE cable will be extruded tightly then I can't put the whole VGM module(with GPU) in the case. How did you solve the problem? My GPU is MSI 4070Ti suprim X 12G Thanks!

@KleoYan 7 месяцев назад

Hi 李育瑋, welcome to my channel. I did not use the VGM from montech. I am using a sample of another VGM which is not release yet. I have tried other vertical mount which is of 7 slots and it works.

@user-sq9ie3gc5f 7 месяцев назад

Dear@@KleoYan: Okay! I got it ! Thanks for your reply. I think the Montech VGM isn't suitable for 3 slots GPU like mine. I'll try to find another VGM. Thank you :)

@KleoYan 7 месяцев назад

@@user-sq9ie3gc5f You are most welcome and all the best with your build too.

@jonathanphang 4 месяца назад

Hey - what a fantastic review - so in depth. I was about to get this case but then realised my EVGA PSU is 200mm and Montech say official support is 190mm. In your review you say that 200mm should be fine - but is this only with the swing panel taken off? Or do you think that the swing panel would interfere with it? I am hoping that it could fit still as I would like to do mesh front with fans and intake on the sides too. If there is any way you could let me know that would be amazing. Also - Singapore is an amazing place - I have family there and in Malaysia. Wonderful part of the world. Keep up the good work!

@KleoYan 4 месяца назад

Hi jonathanphang, welcome to my channel. You will need to remove the side swivel tray if you intend to place a PSU with length of 200mm. Reason to remove is that you can’t close the swivel tray. By the way, thank you for the compliment of my country and all the best with your build too. 😉

@jonathanphang 4 месяца назад

@@KleoYan Ah its a shame over 10mm but at least its easily removable. Maybe I will just use a tool to cut a small section away. I think I will get this case though - seems lovely to build in - I have the original Razer O11D and need something that can take wider GPUs and their 12vhpwr cables! Will have to take the time to rewatch the video all again - so much detail in every aspect. I do wish you could do push pull at the top - I do at the moment and in total its about 80mm so will have to make it just push. Keep up the great videos

@KleoYan 4 месяца назад

@@jonathanphang wow 80mm thick will hit the side VRM heatsink and blocking the 8pin EPS routing point. I had the same idea but ended up doing push push with a 280 Liquid AIO at the side. Just to share, this is how it looks like www.reddit.com/r/MontechPC/comments/19esupr/project_montech_king95_pro_sonic_the_hedgehog/

@jonathanphang 4 месяца назад

@@KleoYanThat looks amazing - glad you finally got that sonic build together. I should try to do a themed case - Unfortunately most of my parts are dark so will probably just go with the black case with choice lighting. WIth just push fans its about 55mm or so should be fine. I will go with that - its a 360 AIO so should still be sufficient cooling wise. Do you find the Montech fans ok for cooling? Thinking of getting 3 more to go with the top mount AIO - I need to see how much they cost here in the UK!

@KleoYan 4 месяца назад

@@jonathanphang if you compare the Montech fans with performance fans, it's far from performance fans, but I choose to use them as I like the sound profile. It's very quiet and perform ok. at least my load temps not hitting above 83°C. They are not expensive in my country. It's about SDG$15 which is around 10 dollars in British pound.

@Red-ding-Ton 4 месяца назад

Hey i need quick ansewer, in this case there's two sata cables coming from fan hub and it says both of them goes to PSU. Is that true? Or i need to plug in one of them into motherboard?

@KleoYan 4 месяца назад

Hi Red ding Ton, welcome to my channel. At timestamp 48:26 of this content. The two Sata connectors are to be plug to your PSU Sata cables. One which is to supply power for your fan and another for the ARGB lightening on your fans and the led strips at the front of the case.

@Red-ding-Ton 4 месяца назад

@@KleoYan Thank you for answer! Today I did my first build in this case and I'm very happy with it. Everything works fine now!

@KleoYan 4 месяца назад

@@Red-ding-Tongood to hear. Thanks for the update. 👍

@Hamzimza 5 месяцев назад

Can you control the RGB of the case from your motherboard?

@KleoYan 5 месяцев назад

Hi Dr. Viq, welcome to my channel. Yes you can. by pressing the function button on the case LED switch. 【Switch lighting mode】: press the LED button to switch between different lighting mode 【Turn off the Lighting】: Press the LED button for 5 seconds until the lighting is turned off. 【Sync with the motherboard】: Connect the ARGB wire(5V) onto the motherboard, press the LED button for 3 seconds

@ABritishGamer1 7 месяцев назад

I am building this now and I can't find anywhere on the motherboard to put the usb 3.1 cable. It supports 3.2 but that has a different format

@KleoYan 7 месяцев назад

Hi ABritishGamer1, welcome to my channel. Don't mind me asking, which motherboard are you using? Thank you!

@ABritishGamer1 7 месяцев назад

@@KleoYan I'm using the Asus Tuf gaming b-550-plus. It has 2 USB 2.0 ports and a USB 3.2 port on the motherboard itself but I can't find anywhere to plug the USB C front case IO port (the cable with USB 3.1 written on it)

@KleoYan 7 месяцев назад

@@ABritishGamer1 if you can confirm this is your motherboard www.asus.com/sg/motherboards-components/motherboards/tuf-gaming/tuf-gaming-b550-plus-wi-fi/, you won’t be able to plug the type-c connector to this motherboard as your board is not equipped with a type c front I/O socket.

@ranagustavo29 3 месяца назад

I am very interested in this case, but in terms of temperature, is there much difference to have or not to have these 3 fans on the bottom? I say this because I have a lot of hdd 3.5 and I would like to put on the bottom of the chassis, but I am worry about if the temperature will increase a lot of. What do you think? The chasis it will be to manage an old computer 3770k with 1660 super gpu and Thermalright air cooler. Thanks in advance and thanks for this amazing review.

@KleoYan 3 месяца назад

Hi Rana Gustavo, welcome to my channel, based on your Processor and GPU. It will be fine without the bottom fans. But I will advise to have performance fans at the side to push more cool air, just to cool your hard disk and GPU area.

@ranagustavo29 3 месяца назад

@@KleoYan Thank you very much for your help :) The idea is to buy King 95, not the pro version, and put a Noctua redux 120mm rear and two 140mm fans of Phanteks and one more on the top, all together making push-pull...and if I see the Phantaks don't work fine, change them for Noctua or maybe Artic Bionix. How do you see it? Any recomendation for the fans?

@KleoYan 3 месяца назад

@@ranagustavo29 you are most welcome. ⁠As for fans I am unsure about which model you are getting for Noctua. But for arctic, I will go for the p14 max as it gives stronger airflow.

@ranagustavo29 3 месяца назад

@@KleoYan The Nocuta I refere is NF-S12B redux-1200, it's not the better airflow but has low noise. For the rest, as I said, firts I will make a prove, and if don't work fine, I'll take a look the fans you said. Thanks again!!!

@KleoYan 3 месяца назад

@@ranagustavo29 you are most welcome. All the best with your build too 😉

@AlaVRSim Месяц назад

Thanks for the review, Can you please tell us the side panel glass dimensions ? I couldn't find it anywhere. I want to install a transparent LCD screen on it and I want to know what is the max size it can support

@KleoYan Месяц назад

Hi Ala, welcome to my channel. I am measuring just the clear area as the top, bottom and back, there is this blue border. The clear area minus off the blue border measures at 395 x 345mm I will suggest to measure your lcd panel with this measurements 390 x 340mm.

@AlaVRSim Месяц назад

@@KleoYan Thanks a lot, you did me a solid

@KleoYan Месяц назад

@@AlaVRSimyou are most welcome and all the best with your build.

@hanmaruf2919 8 месяцев назад

still can put 360 arctic lf2 at top?

@KleoYan 8 месяцев назад

Hi Han Maruf, welcome to my channel. Yes no issue with 360. Only 280 you got to be careful.

@hanmaruf2919 7 месяцев назад

@@KleoYanif top arctic 360mm and side still can be mounted with 240mm radiator? I have aio arctic 360mm and rtx neptune aio

@KleoYan 7 месяцев назад

@@hanmaruf2919i do not have that to try but based on experience. If you have already mounted a Arctic LF2 360 at the top and to have the front hose at the front, this is the part where it's tricky. Arctic LF2 360 hose on the rad, you can swivel, so if you mount the 240 at the Side. your hose might hit the 240 rad hose. Unless you fix your Arctic LF2 360 Rad hose at the top rear, then there will be more than enough clearance for your side 240. On one point, mounting the Arctic LF2 360 rad hose at the rear, you will face issue too. the hose are at 450mm in lenght, it's very long, you might have a struggle to have it in place. So that's my take on it.

@tomastomejus1982 8 месяцев назад

I confused so side fans are intake and if you put them on the front they becoming exhaust 😅ot I am wrong

@KleoYan 8 месяцев назад

Hi tomas tomejus, welcome to my chanell, sharp observation 😉once you swivel the side tray to the front, you need to flip the reverse fans, that will correct it to be intake fans 😊.

@BartFlossom 7 месяцев назад

@@KleoYan If you turn the fans around as you suggest, the RGB will not show through the front mesh. I finished my build yesterday in this case, and I purchased two additional *standard* fans for the front so the airflow would be inward _and_ the rgb lights will show through the mesh. This means I am *not* using the two fans that came pre-installed on the side; but I keep them in case I change my mind later. That's what's so nice about this case -- it gives you many options. Thanks for a great review.

@KleoYan 7 месяцев назад

@@BartFlossom hi and welcome back. Thanks for the feedback. Greatly appreciated it. Yup this case has many options. 👍

@ethancbaker2002 5 месяцев назад

One last question. This is the last thing I gotta do with my buildand I’ll quit bothering lol on the argb fan hub it’s not the one that is 3 pin argb but the other black 3 pin where it looks like it will plug in as a fan hub for the argb header do you know what port this would go in for the b550 msi motherboard? Thanks.

@ethancbaker2002 5 месяцев назад

It 4 pin but one pin looks gone

@ethancbaker2002 5 месяцев назад

It’s the pwm 4 pin connector for the fan hub

@KleoYan 5 месяцев назад

Hi Ethan, that black cable which has a 3pin, it is to plug to your motherboard JRAINBOW 1 or 2 header. in the event if you do not want to use the case LED button to control the ARGB effect, you can make use of your motherboard ARGB software to control the argb effects but make sure to toggle the case LED button to sync with your motherboard. Function of the case LED switch are as follow. 【Switch lighting mode】: press the LED button to switch between different lighting mode. 【Turn off the Lighting】: Press the LED button for 5 seconds until the lighting is turned off. 【Sync with the motherboard】: Connect the ARGB wire(5V) onto the motherboard, press the LED button for 3 secondsLED.

@KleoYan 5 месяцев назад

@@ethancbaker2002 that will go to any fan header of your motherboard but do note, all your fans that are plug to the fan/argb hub will follow the fan curve you have set for that specific fan header of your motherboard.

@KleoYan 5 месяцев назад

@@ethancbaker2002 Just to share with you, how I will plug it. if you have Liquid AIO, plug the pump to PUMP_FAN and plug the radiator fans directly to CPU_FAN. then for case fans, plug it to the fan/argb hub. then connect the 4pin PWM connector to any of the motherboard fan header. this way if your case fan failed (the fan/argb hub failed). your AIO radiator fans will still be operational.

@logo8009 5 месяцев назад

I'm a little confused on the ARGB and fan hub @ 49 min. Do use use the Sata connector along with the other side of the fan hub for the mother 5V ARGB 3 pin & PWM 4 in connector. So do use use one side or both sides. Thanks

@KleoYan 5 месяцев назад

Hi Logo 800, welcome to my channel. you are required to plug the Sata connector from the fan/argb hub to your PSU Sata cable. As that will provide current for your fans and the argb leds. On the fan/argb hub, one side is mainly for your fans (4Pin PWM) which you can control via your motherboard fan utlity, the other side are for your fans argb connectors where you can control the argb lightings with the case fan button.

@logo8009 5 месяцев назад

@@KleoYanThanks

@KleoYan 5 месяцев назад

@@logo8009 you are most welcome and all the best with your build 😉

@logo8009 5 месяцев назад

@@KleoYanYou gain a subscriber today. Much thanks

@KleoYan 5 месяцев назад

@@logo8009 you are most welcome and thank you to have subscribe 👍👍👍

@arjohnvillaester3390 6 месяцев назад

Hello Good day. Hope you notice me. Can we do like sandwich Fans on the AIO? Top mount.

@KleoYan 6 месяцев назад

Hi Arjohn Villaester, welcome to my channel. Yes you can but kindly note the limits. Make sure your motherboard side VRM or rear I/O heatsink is not taller than 43mm in height, else your push pull configuration radiator fans will hit it.

@shanehazelton8754 6 месяцев назад

I purchased the pro version with an air cooled gpu in mind. I ended up with a msi 4090 liquid Supreme x and struggle to find a solution for the cpu and gpu radiators Any suggestions

@KleoYan 6 месяцев назад

Hi Shane Hazelton, welcome to my channel, may I ask are you using liquid cooler for your processor? and what size is the liquid aio?

@shanehazelton8754 6 месяцев назад

@KleoYan Yes 360 thermaltake aio Excellent video by the way

@shanehazelton8754 6 месяцев назад

@KleoYan Not sure if I should mount the 360cpu aio up top (as exhaust) gpu 240 on the side (as exhaust) and put the 2 140 fans the case came with up front (as intake) Along with the 3 120mm fans on bottom as intake? Not sure what to set the rear fan for intake or exhaust

@KleoYan 6 месяцев назад

@@shanehazelton8754 I would do this kind of configuration. - 3 fans at the bottom (intake) - 3 fans on your 360 liquid AIO at the top (Exhuast) - 4 fans on your 4090 Liquid AIO at the side with push pull configuration (intack) - 1 fan on your rear (intake) the reason to have a push pull configuration on your 4090 Liquid AIO is to brutally force the warm air to project in and out faster and the rear as intake helps to push some of the hot air off from your motherboard area.

@mellowthm566 5 месяцев назад

Can you flip the side fan mount upsidedown or remove it entirely? Saw your thermal test showing side radiator is cooler and want to get some of new taller 28-30mm fans on the radiator but would rather have guaranteed room for GPU's since they're massive and the clearance looked tight. Worst case i guess i could do the mesh and see if mounting to non moveable fan brackets gets the needed room😅.

@KleoYan 5 месяцев назад

Hi Mellowthm, welcome to my channel, I can have all the space I want at the side, even do push pull configuration, but I am mounting my GPU Vertically. with Horizontal Mount GPU, there are lots of restriction of side mount liquid aio. you will end up mounting a 360 at the top. so you have to consider which route to go. as for flip the side fan mount upsidedown, I have no idea what you meant by that, do pardon me. Anyway this is my current build with Side 280 AIO (Push Pull) www.reddit.com/r/MontechPC/comments/19esupr/project_montech_king95_pro_sonic_the_hedgehog/

@mellowthm566 5 месяцев назад

@@KleoYan Thanks for replying. I mean remove the side radiator mount from the hinges flip it so it's facing outward ( i don't know how to describe it well- but oh you showed how the top bracket needed to be facing a specific way to fit even if it could be removed and flipped. Wonder if it's like that.) Probably won't find that extra 5mm I need but can't do vertical GPU mount cuz i need the pcie slots. Shame though cuz less fans with better cpu cooling and better noise sounds ideal. Great video on the case most informative i could find on the internet.

@KleoYan 5 месяцев назад

@@mellowthm566 ok, I know what you mean now about the hinges flip. ok looking at the side tray, It's not possible to flip upside down as you see the hinge scew areas of the top points does not have equal position. at the top hinge, the position is towards the top by 10mm as for the bottom the hinge is off from the bottom by 20mm.

@mellowthm566 5 месяцев назад

@@KleoYan thanks i figured a different way to make it work (push 30mm/pull 25mm on motherboard side) but would not thought of it without your video. There's only 1.3 C between freezer iii 360 and 280 so I'm really getting my cake and eating it too with push pull

@KleoYan 5 месяцев назад

@@mellowthm566 I see, I am curious how you did it. do you mind to share some pics and send it to my email. this will be good for the community too, if they intend to do like what you did. Rest assure, credits will be to you.. my email is at godzylatech@gmail.com . Thank you very much 👍👍👍

@rener.1978 18 дней назад

Now I have this case but also a msi mag b650 tomahawk with the heatsinc on the top and a arctic liquid freezer iii 360. Hope it fits.....

@KleoYan 18 дней назад

Hi René R., welcome to my channel and congratulations on your purchase. The only worries is on the LF3 280. I can assure you that the LF3 360 will fit nicely, not to worry 😉

@rener.1978 17 дней назад

@@KleoYan Thanks for your quick reply. Much appreciated!! Iam waiting for the last parts for my pc build. Iam not a tech guy. So lets see how your video is going to help me to build my first PC. Your Video is great by the way!! Very in depth (this is what I need).

@KleoYan 17 дней назад

@@rener.1978 you are most welcome and all the best with your build too. 😉

@michalbelko5676 12 дней назад

hey i wanted ask i got mag 650 tomahawk and AIO 360 Liquid freezer III so it will not fit right ?

@KleoYan 12 дней назад

@@michalbelko5676 it does fit. The only worries if your liquid freezer III is of 280. So yes 360 able to fit at the top without issues.

@michalbelko5676 12 дней назад

@@KleoYan but i have Mag B650 tomahawk i m scared m WRM will block fans sorry if i boder you whit my dumb questions !

@KleoYan 12 дней назад

@@michalbelko5676 this you dont have to worry. As mentioned 360 Liquid Freezer III will fit with your B650 Tomahawk,. I have mentioned, you only worry if your AIO is of 280 and not 360.

@michalbelko5676 12 дней назад

@@KleoYan i love you men thanks for respond :3

@KleoYan 12 дней назад

@@michalbelko5676 you are most welcome. All the best with your build. 😉

@MrWamp22 7 месяцев назад

Can I do a push pull fan setup on 360mm rad on top?

@KleoYan 7 месяцев назад

Hi Sylver, welcome to my channel. If you are standard liquid AIO that has radiator thickness of 27-30mm with push pull configuration, you should be able to, but you need to take note on your rams. High profile rams with the side stucking outwards, you will have an issue. As for Arctic Liquid Freezer II you have to use low profile rams as it's radiator is at 38mm thick.

@MrWamp22 6 месяцев назад

@@KleoYan Thank you for this, I'm using a tforce delta ram which is high on sides, i'm gonna change it once I bought this case.

@KleoYan 6 месяцев назад

@@MrWamp22 ok dokie. All the best with your build. 😉

@BankCholla 5 месяцев назад

About VGM, Do you think I can use a Cooler master card holder kit V.3?

@KleoYan 5 месяцев назад

Hi Chollawit Samernate, welcome to my channel. Yes you can use the coolermaster GPU vertical mount v3 kit. Thank you to have visited and all the best with your build too 😉

@BankCholla 5 месяцев назад

@@KleoYan Thank you krub, I hope it so :)

@KleoYan 5 месяцев назад

@@BankCholla you are most welcome.. my name is Kleo not krub.. anyway, all the very best.

@BankCholla 5 месяцев назад

@@KleoYan Sorry Kleo, "krub" is a thai wording. Maybe you can hear when thai people greeting say "Sa-Wud-Dee-Krub" right? we put krub in last word of sentence for polite

@KleoYan 5 месяцев назад

@@BankCholla oh ok.. got you. pardon me and thank you for the clarification. 😉

@angelojeremydy5629 8 месяцев назад

Hi Kleo! Just want to ask if which one is better overall. The Lian li lancool 216 or this montech 95 pro?

@KleoYan 8 месяцев назад

Hi Angelo Jeremy Dy, welcome to my channel. You have hit the jackpot as the Lancool 216 is my all time favourite case. It's tough to choose between these cases as both are very modular and well build. I will advise you to narrow down these points and to decide (Montech King 95 vs Lancool 216) , from most important 1) ~ 3) to less important 4) and 5) 1) which is cheaper? (Most important as you can spend lesser on case and to use on better PC Parts) 2) does the case provides you the features you wanted? 3) do you have enough space to place it on your desk? 4) do you want a different color? 5) both case does showcase your build but which is more elegant? I have also done a review on the Lancool 216, ru-vid.com/group/PLEW-b-2vYDdPPLZkj4wPeAdBx3Jhxp4dc&si=7tA6KbqyRzVloIwl Compare my reviews on both cases, once you know each caoability, first factor to will be price, which is more worth getting Note : both cases are given to me so please take this as a pinch of salt. For me I have to admit, I like the King 95 but yet to test the thermal. Looking at the structure, all areas are ventilated, plus I am able to convert the side tray as front intake and to change the front tempered glass to mesh panel. I will go for this case over the Lancool 216 as these are my reason 1) I can choose a different color (red or blue) 2) it's more spacious 3) it has a unique look 4) I believe airflow will be good as I've mentioned 5) My desk have enough space to put this case 6) excellent to showcase my build, this is for myself to look at.

@angelojeremydy5629 8 месяцев назад

@@KleoYan Thank you so much for the detailed answer to my question. I can get the Lian Li 216 for 90 dollars here in the Philippines. I dont have an ac room and i want a case that has an excellent airflow. At first i thought that this montech king 95 pro is just a regular dual chamber, but having to replace the front panel into mesh made me think this is worth getting for. Will you do a thermal test someday of this case? Again, thank you for that answer! You're the Goat!!!!!

@angelojeremydy5629 8 месяцев назад

@@KleoYan i already watched your review on the Lancool 216 and it is the reason why i want to buy it. But you just posted this Montech and i am torn between the two

@KleoYan 8 месяцев назад

@@angelojeremydy5629 oooo. Selamat Pogi 😉I only knows how to speak simple tagalog.. Now if you are not in a hurry, see how much it cost for the King 95 or King 95 Pro. if it's more expensive like 2 x the price of a Lancool 216, then go for Lancool 216. As I know for sure 216 has the good thermal result. Yes I will test out this King 95 and see how the thermal goes also if you find out that the price of this King 95 or King 95 pro is slightly more expensive, lets say about 120 and if you can wait. hold on a while I will do up the thermal test next week.

@angelojeremydy5629 8 месяцев назад

@@KleoYan yowwww thanks pogi!! Yes i can wait for the thermal test of the case. As for the price point, if it is 50 dollars expensive i think i can still purchase it because i am considering putting 6 lian li sl120 v2 to the lancool 216 case if ever and in total the lian li 216 with sl120v2 fans will be more expensive

@Newtopcgaming23 14 дней назад

Can you fit an E-ATX motherboard in this case?

@KleoYan 14 дней назад

Hi Beniamin Popusoi, welcome to my channel. There are no E-ATX standoffs for this case. Though you can still plug an E-ATX board in this case but you will not be able to use the side fan tray as the E-ATX board will block your fans from seating on it. I would not advise you to use a E-ATX in this case.

@Newtopcgaming23 14 дней назад

That’s unfortunate. I really want the b650 taichi lite. If move the two 140mm fans to the front and use the mesh panel, do you think that’ll give the motherboard enough room on the side?

@KleoYan 14 дней назад

@@Newtopcgaming23 yes. that will give you clearance. no issue.

@anooymous84 8 месяцев назад

hello, by right the case does not E-atx, but can u test if its possible?

@KleoYan 8 месяцев назад

Hi anooymous84, welcome to my channel. I have tested an E-ATX and I do not encourage it. it will be protruding out over the side rubber grommets and also the front 3 screw holes of the motherboard, there are no standoffs to hold in place. I mean you can put E-ATX but just have to be very careful with you plug the 24pin ATX cable to the motherboard or to unplug it, it might break if too much force is applied.

@anooymous84 8 месяцев назад

@@KleoYan thanks, so it's possible to jank it... I'm torn between the o11 Evo xl & this one

@KleoYan 8 месяцев назад

@@anooymous84 as mentioned. it is possible to fix.. just when you want to connect your 24pin connector at the front... make sure you hold and support your motherboard, then plug it in. Same apply when you remove the 24pin cable

@anooymous84 8 месяцев назад

@@KleoYan I also got a cooler master right angle 24 pin adapter

@KleoYan 8 месяцев назад

@@anooymous84 you can give it a try, just take note that the motherboard is protruding out and with the right angle 24pin it will protrude abit further.

@erevoz 5 месяцев назад

Hi, at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vc1MD0bbcoE.html , you put Artic LF II 280 on top, total height which i found on spec sheet is 65mm, if i plan to put Artic LF II 360 which total height is 63mm and my e-atx (asrock x670e steel legend) heatsink vrm like your MSI MAG motherboard posisition.. it still will be fit? and how about material compare to lianli alumunium?is the same or below? thanks for your answer

@KleoYan 5 месяцев назад

Hi Cahyadi Wibowo, welcome to my channel. For Arctic LF2 360, you dont have to worry about spacing. it will fit perfectly, hmm ASRock Steel Legend X670E is an atx motherboard, it's not an E-ATX, neverthenless it will fit. As for material wise. it's on par with Lian Li cases and I am currently using a build in this case www.reddit.com/r/MontechPC/comments/19esupr/project_montech_king95_pro_sonic_the_hedgehog/

@erevoz 5 месяцев назад

@@KleoYan ahh yes.. my mistake, so atx asrock x670e steel legend is compatible with artic LF ii 360 on top with this case?thx for your fast response

@KleoYan 5 месяцев назад

@@erevoz yup. There are more than enough clearance.

@msaber1797 7 месяцев назад

ive got a evga 1600 g+ psu thats 199mm and ive read that this case fits 190mm psu's do you think it will fit okay?

@KleoYan 7 месяцев назад

Hi msaber1797, welcome to my channel. I have re-measure the clearance. I did mentioned you can place a 200mm lenght PSU without issues BUT, you will not be able to close the back tray (where you can install additional fans and SSD), unless you remove the tray totally, then it's possible. I also found out that anything that is longer than 185mm, you can't close the tray.

@msaber1797 7 месяцев назад

@@KleoYan Thank you for checking I really appreciate that

@msaber1797 7 месяцев назад

@@KleoYan Thank you for checking I really appreciate that

@KleoYan 7 месяцев назад

@@msaber1797 I should be thanking you, as I recheck something which I've missed out. I will highlight this on my next content of this King 95 case (Thermal Test).

@msaber1797 7 месяцев назад

@@KleoYan I'm going to see if i can do some slight modifications to the back tray to get my psu to fit, if not ill have to remove it and lose out on drive space that i need. I have 2 hard drives and 2 ssd's. My case should be here in about a week

@silfrido1768 4 месяца назад

how do i control the rgb strip on the case ? it lights up but when i click the button to change colors nothing happpens

@KleoYan 4 месяца назад

Hi Silfrido, you might want to check the 2pin connector on the fan & ARGB hub that I have mentioned in this content. It could be lose.

@silfrido1768 4 месяца назад

@@KleoYan ohhh okay, so I need to buy an rgb hub for it ? I didn’t buy the pro version. Is there any way that I can connect to an rgb hub that’s in my case already ? obviously it has to take the same connection type lol

@KleoYan 4 месяца назад

@@silfrido1768 does your king95 comes with the hub which I have shown in this content? If it does. As mentioned check in the connection. If you do not have that, then you will need to get a separate fan & ARGB hub.

@silfrido1768 4 месяца назад

@@KleoYan no since I didn’t buy the pro version it did not come with the included fan / rgb hub. Can I buy any one of them or does the Montech case take a specific fan / rgb hub ?

@KleoYan 4 месяца назад

@@silfrido1768 I see. Nope the default fans does not need a specific controller. You can get it at Amazon. You can get something like this where it does have the 2pin plug. a.co/d/3QpbMd0 which you can plug the front small button connector to this hub.

@phalaxis3573 8 месяцев назад

Great vid! Does a 280mm AIO fit on the side if you use front fans?

@KleoYan 8 месяцев назад

Hi Phalaxis, welcome to my channel, you can only choose the side swivel tray to the front or side. if you are thinking to swivel this to the front as front intake and to mount your 280 on the other side tray, you can't, the alignment is off.

@phalaxis3573 8 месяцев назад

@@KleoYan Ah that makes sense. So then alternatively, would a 280mm AIO Radiator as the front intake and 2x120mm fans on the side work?

@KleoYan 8 месяцев назад

@@phalaxis3573 yes you can do that. it will work.

@phalaxis3573 8 месяцев назад

@@KleoYan in your personal preference, how would you rank it against the O11 Dynamic Mini and O11 Mini Air?

@KleoYan 8 месяцев назад

@@phalaxis3573 Hi and welcome back. I will only pick the 011D Mini and this King95 Pro, I won't rate but will say that I don't mind either as both are of the right size for me. It greatly depends on your imagination to construct a pc. I had a fair share of building a PC in the O11D Mini and I do like the modularity ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-caZg__l18Dk.htmlsi=a411_ZjQDGqSupsQ. I have move on and this King 95 will be my next build. If you seriously wants me to rate. I will give O11D Mini a 7/10 as the top, you will need to get a 360 offset bracket and you will need a SFX PSU. As for the King 95 Pro, it's everything in and I will give it 8/10. 1st it's slightly bigger and 2nd the mesh filters, you can't remove them.

@tfoji7788 7 месяцев назад

What vertical gpu mount is that?

@KleoYan 7 месяцев назад

Hi Nonaks, welcome to my channel. As mentioned, this is a 7 PCI-E slot vertical GPU mount from Montech which is not release yet.

@tfoji7788 7 месяцев назад

@@KleoYan Thank you for answering, will i be able to use something like (Cooler Master Vertical GPU Holder kit V3)?

@KleoYan 7 месяцев назад

@@tfoji7788 yup, you will be able to use that. Just push away the GPU away from your Motherboard, give it some air though and not too near the side glass panel will do.

@snowmansan 5 месяцев назад

the sound from my desktop is too loud is there a way to decrease the sound

@KleoYan 5 месяцев назад

Hi snowman san, welcome to my channel. Which fans are you using? You might want to try lift some gaps between the fan and the fan mounting at the bottom or side with washers, where intake air is at.

@snowmansan 5 месяцев назад

@@KleoYan i can only show what is inside

@snowmansan 5 месяцев назад

the fan is really loud

@KleoYan 5 месяцев назад

@@snowmansan which fans are you referring to? Hmm. If it’s ax or rx from Montech. They are not loud to me. But individual will have different hearing.

@Newtopcgaming23 4 дня назад

Hey, why not use the hub to plug in the AIO fans?

@KleoYan 4 дня назад

Hi Beniamin Popusoi, welcome to my channel. It's just my own opinion. You can plug if you want to. For me, it's just that I have ever face issues with Fan hub gone faulty during operations, therefore I prefer to plug Aircooler or Liquid cooler fans to the motherboard directly. In the even if the fan hub fails, at least I know that the fans which are plug directly to the motherboard is still operational. There is also another factor which forces you to use the fan hub with an aircooler or liquid aio, this is when the motherboard fan headers are not able to provide the sufficient ampere, then you got no choice but to use the fan hub.

@Newtopcgaming23 4 дня назад

@@KleoYan 1. If the fans will fail will you not notice by the fans not lighting up? 2. I think I have plenty of fans on my mb, I can just use those I guess…is it the cpu/water pump fan connectors? I have 6

@Newtopcgaming23 4 дня назад

I have to make sure the mb is going to provide enough ampere for the fans!

@KleoYan 4 дня назад

@@Newtopcgaming23 if a fan fail. Yes you can see by the lightings or the rotation of fans. As mentioned is my style to plug fans and to control them. I would plug aio pump to AIO_PUMP header on the motherboard as that header carries much more ampere on some motherboard and radiator fans to CPU_FAN. As some motherboard will prompt at initial start up is CPU_FAN is detected faulty and such. As for the rest of the fan headers. Either you use it or to apply to a fan hub is perfectly fine, even they are faulty, it’s just the impact of the case airflow. The primary idea of this is to safeguard and to ensure pump and radiator fans are in operation priority to case fans.

@KleoYan 4 дня назад

@@Newtopcgaming23 yup. Best practise. For case fans to the fan hub is ok but only thing is, once all fan plug to the hub. You can only have one fan curve to all case fans. Else plug to motherboard directly. You can fine tune according to 1) thermal and 2) noise.

@44Mercy187 6 месяцев назад

Whats good so if i want to vertically mount my gpu i have to use it from Montech?

@KleoYan 6 месяцев назад

Hi its_Mercy, welcome back. since the start when I use fish tank style case. I always use vertical mount. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.html or ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-alzjcxuK3wk.html. You can look for 7 slot PCI-E universal vertical mount bracket. I have tested on a Lian Li Lancool II Vertical mount but please note, this mount only on PCI-E 3.0 so ya.

@44Mercy187 6 месяцев назад

@@KleoYan But is the cooler master vertical mount alright? btw i love ur reviews

@KleoYan 6 месяцев назад

@@44Mercy187 Cooler Master V2 is a no go.. can't fit.

@44Mercy187 6 месяцев назад

@@KleoYan what about the v3?

@KleoYan 6 месяцев назад

@@44Mercy187 same can’t fit

@ethancbaker2002 5 месяцев назад

How did you get the top of the connector out? They are three ports that are covered on the top

@KleoYan 5 месяцев назад

Hi Ethan Baker, welcome back. Do you mean the fan and ARGB hub or? If it’s the fan and ARGB hub. It is fasten with two screws.

@ethancbaker2002 5 месяцев назад

@@KleoYan I mean the three ports on the top of the connector for the argb fan hub (the three pin connector) they seem to be full is this a cover? I may be dumb lol. sorry to keep bothering but your ports all look to be able to put the three argb connectors in it. I am installing a Corsair h150i elite lcd aio on my build and instead of putting corsairs fans on it I’ve decided to use montechs fans so they all match! They are the same 120 pwm fans that come with the rest of the case I wish I could show. It all looks good but I just want my argb to connect to the fan hub and I can’t I think I’m just dumb and it’s just a cover keeping me from plugging them in lol

@KleoYan 5 месяцев назад

@@ethancbaker2002 hmm.. at time 45:43, you will see that the fan and hub controller, right below it, there are two screws. you can remove and take out the controller. plug your fan pwm and argb and once done. screw it back in place.. that's what I did, anything unsure, can always refer to the instruction manual.

@ethancbaker2002 5 месяцев назад

@@KleoYan Thank you! I posted on Reddit too and it does seem that they may be just covers on the case so they don’t get bent? I just dread taking it out since everything is connected but you gotta do what you gotta do lol. Thank you!

@KleoYan 5 месяцев назад

@@ethancbaker2002 no problem and most welcome.. all the best with your build buddy, once done post at reddit and drop me an email so that I can see how your builld looks like 😉godayzlatech@gmail.com

@ShafiqAS 4 месяца назад

@KleoYan Can i side mount nzxt 280 radiator?

@KleoYan 4 месяца назад

Hi A S SHAFIQ, welcome back. I can mount 280 Arctic LF2 or 3 radiator directly to the side tray and have fans above the radiator. For 280 Galahad II LCD I have to do push pull configuration as the radiator is too width and too tall to Fit. Also I have to vertical mount my GPU to give clearance. As for your nzxt, I have no idea. Best if you can search the specs measurements of the 3 aios and compare. I believe you have asked this question.

@ShafiqAS 4 месяца назад

@@KleoYan yes, thank you, I was confused because their website said that you can only mount 240 on the side that's why I asked you, and Galahad 2 LCD radiator (319.5 x 140 x 30mm) and Nzxt 280 radiator(315 x 143 x 30mm) I think I can put in side ways and one more thing with 280 rad do I have to install 140mm fan or 120mm ..

@KleoYan 4 месяца назад

@@ShafiqAS 280 Liquid AIO is to use 140mm fans, you can't mount 120mm fans on a 280 Liqiud AIO, unless you use a bracket but it defeat the purpose to have a 280 rad and to use 120mm fans.

@ShafiqAS 4 месяца назад

@@KleoYan thanks , i am still new , learning slowly

@KleoYan 4 месяца назад

@@ShafiqAS ah ok. just stay calm and do one thing at a time. don't rush in a build :P

@LKicksBucket 7 месяцев назад

The struggle of finding a normal size atx case that can mount Arctic 280 on the top continues lol.... I'll most probably just going to mount it at the side again.

@KleoYan 7 месяцев назад

Hi L Kicks Bucket , welcome to my channel. For fish tank style, best to have it at the side for 280.. that's an advantage.. just like my old case ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-caZg__l18Dk.htmlsi=aFPxW06bg2fEtn8X

@LKicksBucket 7 месяцев назад

@@KleoYan thanks great to know, that is going to open up more options for case selections.

@KleoYan 7 месяцев назад

@@LKicksBucket yup and you might want to watch part II ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bdNw54KGPLU.htmlsi=uV9eejHjGrPZqEYn

@LKicksBucket 7 месяцев назад

@@KleoYan yea i skipped to the arctic 280 section, thanks for taking all the time to test out the best fans configuration!

@KleoYan 7 месяцев назад

@@LKicksBucket you are most welcome and all the best with your build too.

@MG0301 8 месяцев назад

Man, Lian Li cases are so ahead of the future, so many brand improvised and praised O11 so much that there will be much more good quality dual-chamber case. If there any company make a M-ATX Dual Chamber case I’ll buy it right away (except O11 Mini because you have to buy SFX PSU and it’s expensive 😢)

@KleoYan 8 месяцев назад

Hi PLkay, welcome back, hmm 🤔 m-atx. Let me see what I can find and let you know. I only know O11 Air Mini allows atx PSU but the space and allocation of that case is weird to me. Maybe you can try out this chassis. The build quality is rock solid.

@MG0301 8 месяцев назад

@@KleoYan yeah, thanks for suggesting but the O11 mini Air never came to Vietnam, if we want to buy O11 Mini air there only Amazon but after buying plus the shipping cost (ship from US to Vietnam) and taxes the cost around the same O11 Dynamic (non-Evo) :)).

@KleoYan 8 месяцев назад

@@MG0301 I see. Hmm guess have to look around for m-atx. Another I can think of is the AP201 from Asus. It’s a good case too. Well build.

@MG0301 8 месяцев назад

@@KleoYan AP201 I really love it, but in Vietnam we have a case name MIK LV12 and LV12-M it’s basically O11 mini support 200mm PSU, 400mm GPU can fit in it and support only 360 and 240 AIO (280 can’t fit don’t know why) - MIK LV12 support ATX to ITX mobo - MIK LV12-M only M-atx to ITX And the other specs just the same like I said at first

@KleoYan 8 месяцев назад

@@MG0301 I see. Ok now you got me curious about this MIK case. Going to do some research. Seems interesting. Thank you for sharing 😉

@bokaboka7130 7 месяцев назад

Hi. i like your review very much. i am feom bangladesh. like to build with this pc. my choice are intel relesing soon 14600 or 14700 non k + msi 760m tomahawk wifi, corsair 750/850 w Platinum psu, g skill rgb 16x2=32gb 5600 ram, 2tb or 2x2 tb or 4 tb nvme and no ssd or hdd,... i wanted to have a 360aio but dont want to top(as heat will go through the radiator ) or bottom mount but side have only 280 opt...as your video the sideway 280 hos @ bottom, can 280 aio with push pul with the hose top is possible? so i cas use the front glass??? og my gpu choice are msi 4070 ti venture or msi 4080 Supreme x, and i want a gpu supporting barcket/stick or something diy...so i will remove a bottom intek fan and top 3x choice......sorry for long comment and mistake.

@bokaboka7130 7 месяцев назад

top 3 exhaust fan montech same fans....white casing.

@KleoYan 7 месяцев назад

Hello Boka Boka, welcome to my channel. Side mount 280 with push pull can be done. Just make sure your radiator size fit. My arctic 280 liquid freezer II fit nicely.

@bokaboka7130 7 месяцев назад

240 aio i guess. mistake

@KleoYan 7 месяцев назад

@@bokaboka7130not an issue for 240 with push pull configuration.

@bokaboka7130 7 месяцев назад

thank you so much for my replay. now help me with a aio choice. my choice are 1stplayer MT 240 Mothra ARGB, Thermalright Frozen Prism 240 White ARGB, + others whit 240. and last Lian Li Galahad II TRINITY 240 ARGB.....i like lian li but bit expensive... oh thank u again for replay. i will subscribe to you now.

@ReVIUTech 4 месяца назад

Hi! Is the top plastic or metal? Thanks…

@KleoYan 4 месяца назад

Hi ReVIU Tech, welcome to my channel. this whole chassis is metal except for the front I/O Panel which is plastic, but you dont have to worry about it as it will still look good. Just to share, this is how mine looks like www.reddit.com/r/MontechPC/comments/19esupr/project_montech_king95_pro_sonic_the_hedgehog/

@ReVIUTech 4 месяца назад

@@KleoYan⁠Great, and your PC looks beautiful. Thanks!

@KleoYan 4 месяца назад

@@ReVIUTech you are most welcome and all the best with your build too. 😉

@ReVIUTech 4 месяца назад

@@KleoYan ⁠Another quick question! Do you know the Lian Li 011 dynamic mini? If yes, which one do you think better? Thanks again…

@KleoYan 4 месяца назад

@@ReVIUTech ⁠if you are into performance and smaller foot print case, the Lancool 216 will be of a better build compared to 011 air. If you are into asethetic with no performance compromises. I will go for either this or the o11d mini. O11 Air mini though is a good case but there are more restrictions with liquid AIO and fan placement.