ARDROIT 30 amp LiFePO4 charger 

Noticed on the Amazon link input voltage is not correct for US. 200-240@50htz. Also us 48v guys would love a 25-30amp model.

Yes 👍 ⚡💡🔋

Thank you for all your videos.

for a basic 30amp LiFePO4 charger that is great . looks like a self test when first power on. I have seen this on better made chargers, also stops the spark when connecting battery . should work on most power system's . The Americas use 60 CY . most out side use 50 CY or Hz . Japan being odd country. part 50 and 60 Hz. and 100V . just get cord your your AC and set switch. that super easy ! . That is a IEC standard on charger. The us is 120/240 60Hz. and should work on 3 phase systems . 480V with 277V phase to ground . even 208V . 100 to 300V input. Japan has 200V in some parts. I say under 200V use 110 setting. 200V up Use 220 setting. interesting how the blue tooth app was off and catch up .mat be a delay in voltage reading. I learned something from watching this. great job !

The app is reading much closer to the cells so is probably accurate measuring the battery and not what volts is pushed in the wires

The lower the amps are for charging, the longer it will take to charge but the benefit is the battery under lower amperage will be cooler and the lithium particles will not embed themselves onto the plate material as a result of driving the lithium utilizing higher amperage current. I would rather have the option to adjust the amp / voltage output to the battery and would make my own clamp for the cable post.

Thank you Bob, nice video!

Thanx for what you do

Always good 😐🤤

What battery app are you using? Thank you for your video! Liked and subscribed.

Can you plug this charger into a tiny 1000w generator, and still charge a lifePO4 battery at 30 amps? (Or 28amps because you never get a full 30amps.) How many watts will this charger pull on a generator to charge a battery at full power. How many watts will a 20 amp charger pulls on a generator to work at full power?

Those skinny leads carrying almost 30 amps 😂and the connection of leads to clamps probably is causing the heat. I'm surprised it performed as well as it did.

how many hours for a 100ah lifepo4 charger starting from empty?

Will it start charging again if left connected and using a draw on the battery?

30amp? What about voltage? Does it do 24 volts?