Тёмный

Are Cantilever 3D PRINTERS still VIABLE!? (KP3S, Prusa Mini, etc.) 

PRINTING PERSPECTIVE
Подписаться 32 тыс.
Просмотров 15 тыс.
50% 1
ВидеоПоделитьсяСкачатьДобавить в

Get professionally manufactured parts for your prototypes at PCBWay (5$ OFF for your first order) - pcbway.com/g/584K9t
👉🏻 Are CANTILEVER 3D PRINTERS still viable in 2023 AND BEYOND? Well, this is the question I will be answering in this video and providing a detailed comparison of the prints. And what better way to do that than modifying the KP3S PRO cantilever 3d printer with dual z linear rails.
🧡 Support my work at PATREON - / diyperspective
📋 RELATED ITEMS TO THE VIDEO (Amazon Affiliate)
- KP3S PRO amzn.to/40xzEIn
- KGT linear rails s.click.aliexpress.com/e/_DB1...
- ANYCUBIC PLA amzn.to/3W3MmwE
📷 VIDEO SHOT ON:
- Fuji X-S10 amzn.to/3Zar9BW
📢 OTHER MENTIONED THINGS:
STL Files of the MOD www.printables.com/model/4331...
🕗 TIMESTAMPS:
00:00 - The problem
01:07 - Causes of the problem
02:42 - Stock ACC/JERK
03:55 - Higher ACC/JERK
04:28 - Affect of soft rubber feet
04:57 - Conclusion/Suggestions
🔗 YOU CAN FOLLOW ME:
Twitter: / diyperspective
Instagram: / diyperspective
#3dprinting #3dprinter #3dprint

Наука

Опубликовано:

 

8 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 50   
@AndroidA258
@AndroidA258 Год назад
the full circle upgrade
@stanstocker8858
@stanstocker8858 Год назад
I have only owned one cantilever printer, a RatRig VMinion. It is my favorite printer for low layer height small form factor detailed prints. Naturally being a RatRig it's been run with Klipper from the day I finished building it. Funny thing it that it does it's best at up to 70 mm/sec or 100 to 130 mm/sec, VFA shows up right around 90, must be hitting some resonance. Interesting video. Stay well!
@GillesBruno38
@GillesBruno38 Год назад
Same here ! I was just taking the klipper route ... and finally changed my mind : thanks !
@PrintingPerspective
@PrintingPerspective Год назад
Klipper is great, but you can still get quality prints if you slow down things.
@stefanguiton
@stefanguiton Год назад
The quality of these videos are great!
@PrintingPerspective
@PrintingPerspective Год назад
Trying my best, thank you ;)
@beauregardslim1914
@beauregardslim1914 Год назад
Intersting stuff, as usual.
@AndrewAHayes
@AndrewAHayes Год назад
I still have and use my original Ender 2 cantilever printer and despite having many printers and even one that cost 18 times the cost of the Ender 2 this Ender 2 is my most reliable printer, I can just send it a file and dont even bother to watch the first layer go down, it just works, I have thought of adding linear rails to it but considering I have it set up absolutely perfect I dont want to risk spoiling it, it will get some new POM wheels eventualy and I have already swapped all the fans for quieter ones and added a part cooling fan (yes they came without part cooling as PLA had only just become popular) and have a spring steel magnetic textured PEI bed on it. whenever I have a part that will fit on this machine I use it despite having a printer that will print 4 times faster, I just love using the Ender 2!
@PonyTech_tosha
@PonyTech_tosha Год назад
uwu
@PrintingPerspective
@PrintingPerspective Год назад
I think a lot of people don't understand that no matter the printer you use with high speeds print rate success rates drops. So I would rather have a print that has a 99% success rate at 8 hours than 90% at 5 hours for example. Plus small 3d printers are so cute! :3
@AndrewAHayes
@AndrewAHayes Год назад
@@PrintingPerspective You hit the nail on the head!
@oleurgast730
@oleurgast730 Год назад
I think about modifying a Prusa mini. The problem there in my opinion is the belt tensioner of the x-axis, as the x-axis is made of two rods with a plastic part for the idler at the end. You adjust belt tension by turning two normal screws. This means the lenght of x-axis variates a bit when adjusting the belt tension. So in adition to the extra z also modification of x is needed. But still it might be an interesting project.
@mg_customs8531
@mg_customs8531 Год назад
I love that channel! Whats the cube you're printing off? Looks like a good benchmark test
@PrintingPerspective
@PrintingPerspective Год назад
Thanks, here you go www.printables.com/model/293137-gjb-test-cube
@Litl_Skitl
@Litl_Skitl Месяц назад
Dropping in my two cents a year later. What is there against printing outer walls first and only lowering acceleration for those? I already did that on an older printer.
@DuyNguyen-mu9ml
@DuyNguyen-mu9ml Год назад
I really like your design. i thought about it but don't know how to make the z axis the best. Thank you very much. I printing the parts and will assemble it shortly.
@PrintingPerspective
@PrintingPerspective Год назад
Well, hopefully, you have modding experience, it is not an easy mod.
@TechieSewing
@TechieSewing Год назад
I like the idea of cantilevers as good enough solutions: small, light, cheap. Still Klipper is good even with slower speeds, especially compared to native firmware with no 'preheat PLA' command? I do like how it looks with two rails, there is that completeness of square frames.
@PrintingPerspective
@PrintingPerspective Год назад
Completely agree with the idea. I see no reason why Klipper would be worse at slower speeds. I almost never use preheat commands, I always do it manually or write a sequence of the heating process in slicer. Yea, I love the look of it! :)
@noway8233
@noway8233 Год назад
Try linear advance and input shaping or just go for klipper , i do that😊
@cristianjosadec
@cristianjosadec 9 месяцев назад
Hello , very good inf i have the kp3s since they came out , now with the Bambulab A1 the game change about the speed but for the price i would prefer a bigger machine . Like the Ender 3 v3 se that is very cheap and can print at 250mm or Neptune 4 even faster .
@ivanhernandezsanchez1117
@ivanhernandezsanchez1117 7 месяцев назад
Can i try it on my kp3s? (NO KP3S PRO)
@stevehofner9872
@stevehofner9872 Год назад
Well I think about putting my KP3s into an Ender 3 frame and allready converted the frame to the belted z-axis mod. Still not sure if it it really worth all the effords and required time to develop and print adapters...
@Avets610
@Avets610 Год назад
Very interesting !
@PrintingPerspective
@PrintingPerspective Год назад
Yup! :)
@FilmFactry
@FilmFactry Год назад
Two things: What if the bed (y axis) was isolated (independent) from the print head (X and Z motion). No transfer of vibration. What if you used a dual rail on a single Z column.
@PrintingPerspective
@PrintingPerspective Год назад
1. I would love to see your 3d printer design of this because maybe it would be interesting just to test it but there is no practical value in this. 2. I used two MGN9H rails on one 2040 profile in my LR + Ballscrew Z-axis video, it was way more rigid, but like I said at this end of the video it doesn't make any sense to beef up one side when you can completely eliminate the wobble by using rails from both.
@PonyTech_tosha
@PonyTech_tosha Год назад
does it jam without the second screw on the Z axis?
@PrintingPerspective
@PrintingPerspective Год назад
what?
@PonyTech_tosha
@PonyTech_tosha Год назад
​@@PrintingPerspective I meant that... is the second carriage independent from the axis and she can jam?
@PrintingPerspective
@PrintingPerspective Год назад
Why would it jam? Maybe with preloaded type of linear rail it would because that end of the x axis is so light, but I used a clearance type of rail that slides very smoothly.
@RaizemHerocu
@RaizemHerocu Год назад
If we can easily upgrade to dual z rail on cantilevers it makes it even betters starter printers for beginners in cost I think
@PrintingPerspective
@PrintingPerspective Год назад
Usually, the most cost-effective printers are those that you don't need to upgrade. Companies can source parts way cheaper in bulk. The problem is that most companies are very incompetent in designing good 3d printers.
@RainbowSheep_was_taken
@RainbowSheep_was_taken Год назад
i was planning on doing this myself lol
@PrintingPerspective
@PrintingPerspective Год назад
FIRST! haha
@RainbowSheep_was_taken
@RainbowSheep_was_taken Год назад
@@PrintingPerspective You beat me to it!
@Genesis-dj7kw
@Genesis-dj7kw Год назад
Im thinking of creating a similar mod for my prusa mini.. it seems intruiging.
@PrintingPerspective
@PrintingPerspective Год назад
It's a great mod for higher speeds and accels, if you can make it.
@miguelcruz470
@miguelcruz470 Год назад
Vou need to test the V-Minion by Ratrig
@PrintingPerspective
@PrintingPerspective Год назад
It is a cool 3d printer but $500 for a cantilever is a lot IMO. You can buy a decent 300x300 CoreXY for that much.
@miguelcruz470
@miguelcruz470 Год назад
@@PrintingPerspective the price may be a little spicy, but let me tell you, your down points on the video are not present on the V-Minion
@PrintingPerspective
@PrintingPerspective Год назад
I completely trust you that it almost doesn't have any wobble and print quality is great. I mean, it uses MGN15 rail + 3060 profile vs MGN12 rail + 2040 profile on the KP3S and the print head most likely are lighter. It is a premium well designed cantilever after all.
@DiegoHCM
@DiegoHCM Год назад
try on my kp3s ....
@idzhoni
@idzhoni Год назад
Вот и получается ender 3)))))
@brandoneich2412
@brandoneich2412 Год назад
Are you willing to share your Design?
@PrintingPerspective
@PrintingPerspective Год назад
I already shared the STL files at www.printables.com/model/433170-kp3s-pro-s1-dual-rail-z-axis-mod But Fusion360 files are only at Patreon www.patreon.com/posts/kp3s-pro-dual-x-80533284
@275jesuss
@275jesuss Год назад
Food poisoning from China (the field is in Russian territory) continues. The cause is (guessed to be ergot fungus in black ears of wheat) Thank you for the fun video.
@noanyobiseniss7462
@noanyobiseniss7462 Год назад
CANTILEVER dead? ALL bedslingers are dead.
@PrintingPerspective
@PrintingPerspective Год назад
Currently, neither cantilever nor all bed slingers are dead, that is a fact. The only people I see saying that are the Bambu fanboys enchanted by seeing high printing speeds for the first time lol.
@Avets610
@Avets610 Год назад
My kps3 pro (like the one in the video) actually prints better and faster than my ender 5 plus (cartesian, not corexy). As an entry level printer a cantiliver can be very good i think.
Далее
3D Printer UPGRADE that ACTUALLY GIVES the BEST PRINT QUALITY IMPROVEMENT
11:16
3D Printer UPGRADE that ACTUALLY GIVES the BEST PRINT QUALITY IMPROVEMENT
Просмотров 62 тыс.
PRUSA IN 2024 | How We Make Our 3D Printers
28:09
PRUSA IN 2024 | How We Make Our 3D Printers
Просмотров 377 тыс.
СТАЛ БОГАТЫМ В ГТА 5 РП! БЫТЬ ФАРМИЛОЙ - ОФИГЕННО (ECLIPSE GTA 5 RP)
43:01
СТАЛ БОГАТЫМ В ГТА 5 РП! БЫТЬ ФАРМИЛОЙ - ОФИГЕННО (ECLIPSE GTA 5 RP)
Просмотров 457 тыс.
The Hardest Challenge!
00:37
The Hardest Challenge!
Просмотров 13 млн
СКОЛЬКО ВРЕМЕНИ МНЕ ПОТРЕБУЕТСЯ ЧТОБЫ КУПИТЬ НОВЫЙ MAC-10 RUBY SHADOW?
00:32
СКОЛЬКО ВРЕМЕНИ МНЕ ПОТРЕБУЕТСЯ ЧТОБЫ КУПИТЬ НОВЫЙ MAC-10 RUBY SHADOW?
Просмотров 869 тыс.
Что запрещено делать, если воспитываешь сына? Психолог Ирина Ковалёва
00:59
Что запрещено делать, если воспитываешь сына? Психолог Ирина Ковалёва
Просмотров 753 тыс.
My Prusa MK4 is now clearly better!
12:05
My Prusa MK4 is now clearly better!
Просмотров 425 тыс.
3D Printed 6-Bay NAS case - Improved in every way!
14:25
3D Printed 6-Bay NAS case - Improved in every way!
Просмотров 99 тыс.
I will never talk about Z wobbling ever again !
10:53
I will never talk about Z wobbling ever again !
Просмотров 454 тыс.
High-Ratio 3D Printer EXTRUDERS - MUST HAVE? or STUPID?
9:57
High-Ratio 3D Printer EXTRUDERS - MUST HAVE? or STUPID?
Просмотров 26 тыс.
Fix your Z axis with Oldham couplings, dual z screws & thrust bearings!
11:28
Fix your Z axis with Oldham couplings, dual z screws & thrust bearings!
Просмотров 100 тыс.
Do you need WIDE BELTS on your 3D Printer? Do they stretch less? (Belt Stretching Myth)
7:36
Do you need WIDE BELTS on your 3D Printer? Do they stretch less? (Belt Stretching Myth)
Просмотров 19 тыс.
This setting might actually be ruining your prints, instead of helping them.
14:28
This setting might actually be ruining your prints, instead of helping them.
Просмотров 192 тыс.
BAMBU LAB Hotend on OTHER 3D Printers - The BEST VALUE High-Flow Hotend?
9:01
BAMBU LAB Hotend on OTHER 3D Printers - The BEST VALUE High-Flow Hotend?
Просмотров 78 тыс.
A 9 Year Old Hotend made my Mk4 50% Faster
6:38
A 9 Year Old Hotend made my Mk4 50% Faster
Просмотров 18 тыс.
3D Printed Turbo Impeller VS Dyson Motor
14:08
3D Printed Turbo Impeller VS Dyson Motor
Просмотров 1,1 млн
OZON РАЗБИЛИ 3 КОМПЬЮТЕРА
0:57
OZON РАЗБИЛИ 3 КОМПЬЮТЕРА
Просмотров 1,1 млн
Лучшие Повербанки с Magsafe и Мощная Зарядная Станция от MoveSpeed
22:09
Лучшие Повербанки с Magsafe и Мощная Зарядная Станция от MoveSpeed
Просмотров 34 тыс.
⚠️ ЛЮБОЙ АЙФОН МОЖНО ВЗЛОМАТЬ?! ВСЕ МЕТОДЫ ХАКЕРОВ 2024
40:47
⚠️ ЛЮБОЙ АЙФОН МОЖНО ВЗЛОМАТЬ?! ВСЕ МЕТОДЫ ХАКЕРОВ 2024
Просмотров 54 тыс.
⚡️Супер БЫСТРАЯ Зарядка | Проверка
1:00
⚡️Супер БЫСТРАЯ Зарядка | Проверка
Просмотров 1,1 млн
Сравнили apple и xiaomi!
0:21
Сравнили apple и xiaomi!
Просмотров 37 тыс.
Для заказа Алисы напишите нам в инстаграм @electronics_latvia.#Алиса #колонка #розыгрыш
0:18
Для заказа Алисы напишите нам в инстаграм @electronics_latvia.#Алиса #колонка #розыгрыш
Просмотров 1,2 млн
iPad Pro 2024 - лучший планшет в истории Apple! Все об Apple Pencil Pro и новой Magic Keyboard
25:21
iPad Pro 2024 - лучший планшет в истории Apple! Все об Apple Pencil Pro и новой Magic Keyboard
Просмотров 26 тыс.