Are cheap PDR tools worth your money? | DIY dent repair tools | Part 1

Подписаться 12 тыс.

Просмотров 15 тыс.

50% 1

Are cheap PDR tools worth your money? This is a part one of two part series where I answer this questions.
For anyone starting out looking for dent repair tools or DIY dent repair, this is worth looking in to.
If you are here for the first time, my name is Zan and thank you for taking your time to watch this. Please make sure you subscribe to my channel for more PDR related content! From dent removal to PDR tools and other PDR related content on weekly basis.
If you are staring to learn dent repair and looking for PDR training videos you should definitely check out my channel!
Best PDR training:
bestpdrtraining.com/
GuardTech Gloves:
guardtechworkwear.com/
#DIYdentrepair #PDR #cheapPDR

Авто/Мото

Опубликовано:

30 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@jejejei274 6 месяцев назад

This guy is a world champion for real.....the absolute best there is😊😊😊

@vidicz 3 месяца назад

Thank you, you are too kind. I just push dents :)

@swartzkoft7886 3 месяца назад

Do you have a video of the most important tools i need starting out ?

@vidicz 3 месяца назад

Hi. I do have a few videos of tools I would buy at the start. They are separated by tool manufacturer

@javanis5151 3 года назад

I purchased a similar set on Ebay when I first started learning PDR and I butchered some panels with them pretty badly Lol. I later realized they're completely crap imho. After all you get what you pay for but when it comes to PDR you just can not take the chance of messing up a customers car.

@vidicz 3 года назад

True that. Hope this video and part two next week will help some people not make the same mistake :)

@musk_fox_snipermusk_fox_sn6645 3 года назад

Hello, I would like to know for you which lamp is the most suitable for paintless dent removal. Thank you

@vidicz 3 года назад

Hi. Check out this video I made: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0rnmZMTt2yo.html

@musk_fox_snipermusk_fox_sn6645 3 года назад

@@vidicz thank you

@soy1941 3 года назад

Buying my first slide hammer. Any advice ? I was thinking kecko 1 pound

@vidicz 3 года назад

Keco is good. I use tiddy tabs slide hammer

@pegleg1az 3 года назад

You can rethread the knock down to our threading.... I have done that with a few...

@vidicz 3 года назад

Probably not worth it tbh :)

@pegleg1az 3 года назад

@@vidicz 1 minute of time to make one more knockdown? OK. You bought it, You might as well make something of it....

@vidicz 3 года назад

The thread is too big as it is now to make it good for standard :(

@victoragresti1777 3 года назад

I also rethread the knockdown and other tools with 5/16 tap..🤗 have you used the stainless metric tips? Does it work on 5/16 18 course thread,or does it seem loose?

@victoragresti1777 3 года назад

@@pegleg1az l have also rethread the knockdown with 5/16 tap..Have you tried the stainless steel screw on metric tips?

@gersonjesusdelreygutierrez3700 2 года назад

Donde ver tus herramientas, me interesa comprar

@vidicz 3 месяца назад

What tools do you mean?

@bulit3538 Год назад

👏

@vidicz Год назад

Thank you!

@Flux_Flow Месяц назад

So everything that came out of the box should just be transferred into a trash bag.

@user-ou7of5oc2u 2 года назад

Крутые у тебя видосы Zan

@hjjcnfjyi6869 3 года назад

Hi, I want to buy such tools, what is the price of this carton

@vidicz 3 года назад

Honestly you don't want to but this...

@hjjcnfjyi6869 3 года назад

@@vidicz I want to buy this equipment and thanks can you help me

@javanis5151 3 года назад

@@hjjcnfjyi6869 WTF? LOL

@vidicz 3 года назад

@@javanis5151 Who would know lol :)

@victoragresti1777 3 года назад

@@vidicz Just goes to show ya,there's a buyer for cheap pdr tools🤣🤣🤣🤣🤣

@p.bexiga7967 3 года назад

现在我去第二部分

@pdrding4278 3 месяца назад

None of the PDR technicians in China will use these tools. These are sold to ordinary customers for DIY denting. There are more professional PDR tools in China

@vidicz 3 месяца назад

I know. The video was made to point out to people who want to start learning PDR, that this tools are not worth their money

@vadim2982 3 года назад

It looks like a toy set for kids, but i would look at working with 200$ rods. Thanks

@vidicz 3 года назад

Your welcome 👍

@RPSDentSpecialists 3 года назад

😂

@vidicz 3 года назад

😅

@victoragresti1777 3 года назад

The Chinese are the great replicators of products..Alot of American companies send there specs to the Chinese.. some of the well known pdr companies use Chinese products..But don't disclose this

@vidicz 3 года назад

No one is saying Chinese is bad. But cheap is bad. You get what you pay :)

@billcui7827 3 года назад

@@vidicz yes cheap is bad. I got some good tools from China not cheap but cheaper than USA. almost half.

@victoragresti1777 3 года назад

@@vidicz👍 quality is based on design of tool,Price is based on what the market will bear ...Good example timex watch basic design.. Very affordable price

@reza_dc2 2 года назад

Let's see you try to pull some dents with this ebay kit , I bet you can still remove dents..

@vidicz 2 года назад

I could...but only because of my 12 years experience. Also it would take me probably 10times more time then if I used the correct tools.

@reza_dc2 2 года назад

@@vidicz Do you think it's worth buying for a beginner? I have some small shallow dime sized dents , nothing serious.. Think it's worth it just to get a feel for it?