Arma 3 - ACE 3 Sniping Tutorial [2017]

Подписаться 252 тыс.

Просмотров 132 тыс.

50% 1

Hey guys, here is a quick and easy guide on how to snipe using ACE 3 and advanced ballistics, note that I will be doing a full-lenght guide about this, covering all gadgets and going into every bit of detail, so hope this helps until then. Cheers!
Mods used:
RHS: United States Armed Forces - www.rhsmods.org/mod/2
ACE3 -
steamcommunity.com/sharedfiles...
ACE-RHS Compatibillity addon for weapons -
steamcommunity.com/sharedfiles...
===================================
Bullet Cam Script by Killzone Kid
killzonekid.com/arma-scripting...
===================================
★Your support is very appreciated, so please do like, share, comment and subscribe to keep this channel going.★
===================================
★★★Music is property of The Epidemic Sound★★★
player.epidemicsound.com/
===================================
★★★Check out my other Tutorial videos ★★★
• Playlist
===================================
★★★Check out Curse/Union for Gamers Network★★★
www.unionforgamers.com/apply?...
===================================
"This video was created using content of Bohemia Interactive a.s."
"Copyright © 2013 Bohemia Interactive a.s. All rights reserved."
"See www.bistudio.com for more information."

Игры

Опубликовано:

2 янв 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 252

@thebgpikester 6 лет назад

Oh my god, actually a tutorial by someone that isn't talking because they like the sound of their own voice. In tutorial format. Rare breed. Well done...!

@fairTX 6 лет назад

Appreciate it man, glad you like it!

@JandMStudios 3 года назад

@@fairTX what map is this ?.

@hyde8971 7 лет назад

Great video, but you did do a small mistake. the wind direction is supposed to be where it comes from not where it goes, so you entered the opposite clock number for that. the reason the shots still hit is the atragmx told you to adjust right and you instinctively adjusted left. just wanted to point that out...

@ShadowKnight7171 6 лет назад

You're wrong. The atragmx says R, as in you have to adjust for the wind going R and move the scale LEFT. I've tried it in the virtual arsenal. Adjusting POSITIVELY for the RIGHT is way off. Adjusting NEGATIVELY for the RIGHT is correct.

@Flyer6405 6 лет назад

No wind direction is input wrong in the video. At 4:10 after he puts in the wind value in the Atrag as 4 oclock (wrong) it shows a POSITIVE windage correction needs to be made. However he actually sets the scope with a NEGATIVE (correct) windage. If he had set the wind in the Atrag correctly to 10 oclock (not 4) the windage would have calculated the NEGATIVE value that he actually used and been correct. Two things you need to remember. 1: the wind arrow points in the direction the wind is GOING not coming from and the Atrag is OPPOSITE it wants to know where the wind is COMING from not going (I know, annoying) 2: For scope windage adjustnemt - NEGATIVE clicks move the crosshair left of target (ie compensating for wind from the left) +POSITIVE clicks move the crosshair right of target (ie compensating for wind from the right.

@Flyer6405 6 лет назад

Great video and I've got a little suggestion to improve its accuracy. The reason your having to flip the wind value the Atrag calculates from + to - when you set the scope is because your setting the wind backwards in the Atrag. Wind direction should be 10 (not 4). This will make the Atrag calculate the correct value and you won't have to flip it when setting the scope. Hope that makes sense

@mayhemsghost7813 4 года назад

Great tutorial! Thanks for including the keys required!

@richie8888 4 года назад

Dude I didn't know this was you lmao. Been watching your tarkov stuff for a long time now!

@wassim176 7 лет назад

Thanks alot , best video i ever seen , better then others you're the best

@TheMayhem15 7 лет назад

Nice one man, im yet to use those mods so was a good education Thanks.

@Mredanreyful 8 месяцев назад

Best video ever, rn I learnt how to make pretty long shots with those scopes

@kantnklaar 7 лет назад

I have a suggestion for you. Ive been playing a custom scenario called Clandestine Sunrise. Its an old one but supposed to be one of the best out there. It has Zeus so you can customize it further to make a nice story out of it. Might result in a cool video

@fairTX 7 лет назад

ill try it out, sure!

@SourDKrein 5 лет назад

Is this mission/map on workshop? would love to download, looks the urban setting looks great

@vendetta1306 6 лет назад

Quick and detailed, nice

@DEUzerr0 5 лет назад

cool did not know you also made those kinda videos bout arma 3. Cool stuff!

@EthernalOynuyor 7 лет назад

also tap r twice and let go if you are in a differently angled, elevated position so that the horizontal position is calculated properly.

@kman175 7 лет назад

Nice video. Thanks for taking the time to make it.

@fairTX 7 лет назад

you're welcome sir

@junxian980 5 лет назад

Two Errors: 1. When you input wind speed, in the box labeled "1" is the "low" wind speed and "2" is the "high" wind speed, which means the minimum and maximum of the wind speed if it fluctuates 2. The "Update" button is not needed, as the values in the "abs" column is already the correct value. When you click "update", the value in abs would be put into "Cur", meaning current scope setting, which is just to save your scope setting after you have taken the shot. When you move on to a new target and calculate the adjustment needed, the "Rel"(relative) column would display the amount of adjustment needed from you "Current scope setting" to get to the "Absolute scope setting". This feature is needed only for real life, when there isn't an indicator showing your current scope setting, and you can just follow the "rel" column and turn the knob accordingly.

@MetalFan10101 2 года назад

Doing something that is not needed is not exactly an error.

@Random-fj7uz 6 лет назад

Thanks man I finally found a tutorial that helps!!!!!!!!!!!!!!

@fairTX 6 лет назад

welcome!

@Redminer9999 3 года назад

Ayy, I found a pre Tarkov video for one of my favourite creators while trying to learn a new skill Hi both future and past FairTx, hope ya good fren

@fabulamcafee 7 лет назад

I cant hit first shot at 2000m but i would like to, thats why im looking up for Arma3 "Ace" in the first place. A full lenght guide like you said in your describtion would be great that inculdes crosswind, windfactor x1.3, Corioles force or something and the bullet spinn.

@obunga6884 7 лет назад

Thank you sooo much this video was very helpful

@fairTX 7 лет назад

evan juel you`re very welcome

@BestofCinco 7 лет назад

I am glad your doing all that as a sniper... by the time you get done, I have moved on to the next town.

@lordbluebaron2270 4 года назад

Chris Waldrop well this kind of sniping is for enemy’s not prepared. If they are in combat they will move around before you get a shot. There is also a stra where you write down the scope alignments in real life so when an Enemy takes cover there you just change scope alignment.

@tylernath 5 лет назад

Hi fairTX, this map looks fantastic, infinitely better to the standard zargabad. I'm looking for maps to make some missions on for a LAN party I'm organising, and this map you played on is perfectly. Apparently it's a map/scenario you were working on a while back? I don't know if you've ever finished it, if you have I haven't been able to find it yet, if you haven't you can know that you have someone who'd eagerly play on such a map, finished or unfinished, it looks great as it is, some great additions I noticed.

@bub900 3 года назад

Hey mate great video however, I am still a bit confused with all the wind settings? Which wind readings do I need to measure and input into the atrag to ensure an accurate shot?

@guyfawkes3883 6 лет назад

Nice goo presentation and final show

@Bob_vv 6 лет назад

I am missing that ammo type in the Atragmx but I have all the other 7.62x51 ammo types please help I can find a solution.

@wolfjester44 6 лет назад

But I wonder what do you do when the target is on a different elevation and angle from you, because that matters a lot. If youre shooting at a target at 800m on an airfield and another target on the same distance but on a hill, your bullet will hit ether below or above it, simply because the elevation difference and the way a bullets trajectory curves.

@MarcoAntonio-ox2uy 7 лет назад

buenisimo video, hasta ahora me vengo a dar cuenta que tenia mas lo de la direccion de viento, lo hacia alreves y aun cuandpo ya eh visto mas tutoriales. gracias

@hoxton6394 6 лет назад

You can in todays version of RHS configure that you rebolt manualy

@dragonbrave8 7 лет назад

I love this type of games were you can learn something useful while playing

@sandborne7968 6 лет назад

if you live in the usa it is lmao who doesnt own guns here

@DCM88 4 года назад

@Vyrex420 If you study physics it is.

@joshclark4832 4 года назад

this helped a bunch !. what map is this takistan?

@bffb_siebe4733 7 лет назад

I have a problem with THE menu sometime THE circkle stays and i cant schoot anymore

@lordbluebaron2270 4 года назад

How do you make adjustments in the hundredths area? (example: 11.55, the last 5) I can only adjust the tenths place. (the 1st 5)

@headshot22331 6 лет назад

How would you adjust for wind on the fly with the range card? I play with a milsim unit and I play as a Designated Marksman. Our rules make it where only actual snipers have an Atrag, and I hear they don't even work anymore. So all I have is a Kestral, vector 21, and a range card. The range card has stuff for wind, but only if it is 4 mps. so lets say I had a target at 600m with a wind blowing east to west at .8 m/s. and for a 4 m/s wind it says adjust 1.2. How would I adjust roughly?

@punish01 7 лет назад

Nice vid :D question what building have you used for that sniper nest?

@fairTX 7 лет назад

I think it's called Panorak (red). One of those apartment buildings.

@benfennell6842 3 года назад

When i press tab+r the vector only gives me the azimuth, i can't seem to get it to give me range. (yes I connected it to the DAGR, and yes the keybinds for the vector angle and range are tab and r respectively) Edit im stupid and wasn't holding R

@FD1CE 7 лет назад

Very Nice. Thank a lot

@Jptoutant 2 года назад

thats amazing, thanks

@JonNukemOfficial 6 лет назад

That quick 180 no scope though :P

@fairTX 6 лет назад

hahah :D

@RicardoFerrariBRKs 6 лет назад

Can you help me??? My inclination angle does not work correctly. How can I fix this?

@krabistheisopod1376 5 лет назад

Please help, when you adjusted the elevation, For me it adjusts the range, not an elevation, please help

@Piotr89waYT 3 года назад

Hey what map was this filmed on? it really looks cool I'm Guessing Fallujah?

@janosrock 6 лет назад

you wouldn't happen to know about any problem with the default zero of the M2010 ESR??? it's always off for a mile high

@CptSnakeshit 7 лет назад

Thanks for the tutorial! What I noticed is that even when I select the correct ammo, for instance 7.62x51 mk.118 of M993 it still on some guns doesn't get the correct elevation. You have any idea why this could be. Some ammo like 50bmg hit exactly where they should.

@fairTX 7 лет назад

probably because the custom ammunition in mods doesn't always perform all that well, that's a very picky topic, i tend to test it and then use what performs best

@rdb9936 3 года назад

Do the bullets on this game become less accurate/begin to tumble as they go sub-sonic at super long ranges do you know?

@tommegg8486 4 года назад

What's the button to open the scope adjustment menu? (the one with the 2 knob)

@Shane67000 7 лет назад

In the Atrag, you have an option in the target tap to adjust latitude and inclination angle. I was wondering what those were used for, when/if I would use them, and how I would find the calculation?

@sqarfuls8649 7 лет назад

Latitude is real world latitude to counteract the coriolis effect, aka, the spin of the earth. Each map had a real world counterpart, thus use this link for all of the latitudes. github.com/acemod/ACE3/blob/master/addons/common/functions/fnc_getMapData.sqf Being I am still learning marksmanship for my ARMA unit I can't answer the inclination angle specifically, I would assume it has to do with shooting up and down hills. But I don't know sorry.

@Shane67000 7 лет назад

Thanks dude!

@StallionBen83 6 лет назад

@2:32 isn't the wind direction coming from 12 not 6? Not that it matters as the wind value is 0%

@_Blo Год назад

Hey, how do you take in your ALT and the targets ALT? or more likely how to check theirs?

@Otor21 4 года назад

Very good video but i dont have that update button on the Atrag

@MrScubaPom 2 года назад

Hi. 2022 now happy new year. i folloed your step identical. after an hour of testing. if I take your date I need to subtract one click from distance and for side if on the calculator it says 0.20L i need to put 0.10R (half of the calculator and instead of L, R to be bulleye (target 300m up to 1100m same thing........... what i do wrong???? EDIT: ok after reading the comments, I modify the wind to where is come from, that set. but distance have tendency to be always I tiny bit to high

@1ksh1kong 6 лет назад

Hello fairTX thank you for ACE 3 Sniping Tutorial and i like it and if you allow to me Translate this video to korean, i want to try to it. how do you think?

@TheAxebeard 6 лет назад

My ATRAG doesn't have an update button... is it automatically updated I guess?

@idsl00 7 лет назад

my AtragMX "C1" result to 0.243 .. why? (M118LR)

@aragontr2840 7 лет назад

nice video

@loyaltotheend4019 4 года назад

ARE SCOPES IN MILL OR JUST MOA? THANKS FOR ANSWERS

@reallyloudpoofy8517 7 лет назад

My biggest problem with ace is the moving. Like if my target moves away I can't shoot them anymore because I'll have to re calibrate. Is that as big a problem or no?

@fairTX 7 лет назад

it all depends on the wind, if it's blowing over 2m/s, you will have to adjust. otherwise, the target probably wont move too far so you should be fine

@cooperbear 3 года назад

thank you so much bor

@FireDemon11 2 года назад

It doesn't seem like the atrag even works anymore? There's a lot of things just straight up missing on it.

@E.Fredericks 7 лет назад

i couldnt get the kestrel and atrag to stay on the screen at the same time, how did you do it?

@fairTX 7 лет назад

search in controls for show atrag/kestrel. cus you can open 1 and show another

@ArmaGuyz 4 года назад

Can you make another more up to date video? This guide ended where I tried to connect the Vector 21B and it says No device found. :(

@_Mildren_ 3 года назад

know it's a comment from 11 months ago but if you never got it working it has to be the original vector 21

@p00nuk 6 лет назад

Hi can you tell me what the increments are on the scope please, i.e say for 300, 500, and 1000 . Cheers

@typicalmurican2546 6 лет назад

Use the range card. It auto configures for your rifle/scope combo. I just found this out and it has helped me tremendously.

@gooncaveenthusiast 7 лет назад

Great vid man!. What map is that? Fallujah?

@fairTX 7 лет назад

Thanks! It's Zargabad, but I added a bunch of buildings and props :)

@ReconGaming14 7 лет назад

This looks like an awesome training scenario, any chance you could put it up on the steam workshop? Or if it's already available, where can I find it? Great job on the video! Huge help!

@fairTX 7 лет назад

hey, thanks! it's supposed to be a full mission, but i put it on hold because of the update, as it already uses 10+ mods. when i finish it, i'll put it on the workshop and let you guys know.

@aarnoman1088 6 лет назад

Any update?

@MrEpicminer69er 6 лет назад

You got a mission file for this?

@Black-kn9gt 4 года назад

5:22 coriolis effect is not exist? You are shooting without horizontal correction at 600m?

@josephbalsamo9471 4 года назад

Can we download some training missions?

@springman22 2 года назад

i can not change the zeroing on my scopes...

@gagenelson2558 6 лет назад

I cannot find keybinds that work. Does anyone know what it is?

@wampyr88 6 лет назад

How to remove ace3 balistics?

@whiskey969 7 лет назад

Hi, Great tutorial. Could you please share your that training mission ?

@fairTX 7 лет назад

thank you sir! even better, give me some time to finish it and it will be a full sniper mission using ACE3. available on workshop soon!

@whiskey969 7 лет назад

Great, I cannot wait for it :) Can I subscribe you somehow in Steam to know when this mission is ready ?

@vaizeth8207 2 года назад

@@fairTX did this ever make it to the workshop?

@arad2137 6 лет назад

Did u upload the tamplate yet ?

@zedktor406 7 лет назад

So... My DAGR Wont update the Atrag after i use the vector to detect the range. I also have a different setup on my atrag. The bottom section is different... Any idea why?

@fairTX 7 лет назад

pretty sure it's the ACE3 update or something, gonna have to update

@christopherweaver9317 6 лет назад

The add-on no longer exists. What do I do?

@alexbandy1519 7 лет назад

Hey for some reason I can't keep my scope still after taking a shot so I can see where the bullet goes, it reloads once shot has been fired And for some reason the kestrel and the atragmx doesn't show up at all My key bindings that I set to the equipment are clear

@fairTX 7 лет назад

Keep holding left mouse button after the shot (dont just click). As for kestrel and atrag, drop them from the inventory and pick them up again.

@alexbandy1519 7 лет назад

fairTX thx man it's working now. Great videos, I'm just about to watch your new video. Again thx for the help.

@fairTX 7 лет назад

you're welcome man.

@dovy2601 5 лет назад

Wait, i remember watching your ACE 3 sniping tutorial back in 2017. Now i come back to realise that's the same fairTX whom'st creates escape from tarkov videos aswell. gg

@derp_productions9199 Год назад

My kestral keeps dissapearing after 2 seconda when i show itnin the corner

@krabistheisopod1376 5 лет назад

I have a problem, I can't have the atragx and the kestrel open both at the same time, why is it like that, please help

@andrejsvrzic6787 Месяц назад

Show Kestrel instead of Open kestrel

@inx4373 7 лет назад

there's no update button on mine...

@plex7056 5 лет назад

Can you link the map?

@negative9910 7 лет назад

When i try to zero the scope it does not allow me to use the wind adjustments too, it uses the default arma zeroing...any suggestions?

@fairTX 7 лет назад

yep, not all scopes are compatible with ACE3. for some mods there are also compatibility patches on the workshop

@lordbluebaron2270 4 года назад

No no no it is not set any buttons for the wind adjustments. You must set it in the settings

@jaimeeduardogonzalezrestrepo 6 лет назад

how is the mod call?

@jamaicanboi6933 4 года назад

cant get my atrag or kestrel to open even when i configured the keybinds.... help ?

@bullgear4x445 4 года назад

it cant be in your backpack, just found out

@orokaki 5 лет назад

Hi . Im trying to turn off the movement on the optical crosshairs after i run a few meters. I dont know where to find this. I have stamina turned off in the MP lobby parameters and fatigue is also disabled in the configuration addons ACE Advancet Fatigue . You know how to change it

@lordbluebaron2270 4 года назад

orokaki you have to find it in the game difficulty

@lordbluebaron2270 4 года назад

I think

@burhansecvr7665 3 года назад

How do I open both of the equipments, if I open another one it makes the other one disappear.

@Seagull780 3 года назад

if you hover over the thing to configure it, wait for a while and you will see another option for show, this will place it on your screen but you can't interact with it while it's ont he screen that way.

3 года назад

@@Seagull780 hey brother, how do I find out my elevation, and is it important? (For example if I’m sniping a dude at sea level from a mountain while looking down)

@Seagull780 3 года назад

@ Yeah it is important but I only know one way of finding out, I think it was in the video as well. You need to connect your vector 21 rangefinder to the computer thingy that gives you your solution, then use the rangefinder to designate the target (tab+t I think) and it should automatically give you the elevation. Alternatively some basic geometry and a map should allow you to deduct the elevation from the difference in measured range from your range finder and distance on the map. And I guess you can also just read elevation on the map and make an estimate based on that.

@kayDawgTV 3 года назад

For some reason my Atrag doesnt have an update button. I wonder if it is because it is automatically updated now?

@raksomething6942 3 года назад

Yeah im not sure but mine doesn't have it either

@GhostKeeper-NL 2 года назад

It does it automaticly these days.

@TV2016Channel 7 лет назад

I'm doing all of these stages with the m24 with the same caliber as in the video and tried with most of the rifle scopes but the bullet hits like a "mile" away anyway, it cal land at the bottom of my scope to the second mils from the center, wtf am I doing wrong?

@fairTX 6 лет назад

Hm, gotta make sure to test how different guns work with ACE3. Because guns from some mods do not perform all that well with ACE sniping equipment. Sorry for the late comment

@axelcaceres8853 6 лет назад

The scope adjustments you make are not equal to meters. If you sniped in Arma 3 vanilla just forget everything you know because the ACE mod is as realistic as it gets. The scope adjustments (either elevation or wind) are MOA adjustments. Those numbers do not equal to meters. So thats why you need to know the rifle, scope and bullet youre using. The scopes in ACE3 are for some weird reason 1/10 MOA adjustments scopes. So for every 0.1 click you are making a 0.10 MOA.. 10 "mini clicks" are 1 MOA. In real life scopes usually are 1/4 and 1/8 MOA Adjustments.. A very important thing to know is the reticle youre using (MRAD or Mildot) as the measurements for shooting slightly vary. The best thing you can do is learn the basics withouth any of that fancy equipment. From 1 to 300 meters its going to be easy to shoot. Beyond that is where it gets more difficult. Grab a range card and understand your ballistics.. See how much your round drops at certain ranges and adjust for windage by shooting and shooting over and over till you have a basic feeling of where the bullet will land. Then proceed to use the Kestrel, Atrax and Dagr.

@axelcaceres8853 6 лет назад

So in a nutshell.. If you want to snipe somebody with a M24 shooting 7.62x51 M118L at 350 meters away you DONT adjust your elevation to 3.5 moa.. You check your bullet chart and try to remember values for basic ranges from 100 meters to 500 meters. In this case asuming you have windage coming towards you, just adjust to 1.7 - 1.8 (value for 350 meters drop) and aim for where you want your bullet to hit. Done.

@jordanssfor 6 лет назад

basically, sniping in ace 3 is a fucking pain in the asssss

@SkyripperThaBird 5 лет назад

@@jordanssfor Sniping in ACE takes some time to set up right which is what I like. It feels realistic, and I usually play the middle ground between all-out sniper and basic rifleman by being a Marksman. I found that I managed to score most hits with my G3A3 (my go-to marksman weapon) by memorizing range values from my range card and adjusting windage accordingly to how off center I hit. The unit I Play with doesnt provide marksmen with the fancy sniper stuff which sometimes sucks but often times makes The experience more enjoyable.

@hgsp 6 лет назад

Further 600m, hit a target in the first shot is almost impossible. The AtragMX is very inaccurated beyond 600m. It gives you plus 2-3 mills above the real measure.

@teamswift9538 5 лет назад

Henrique Giffoni this mod is anoying af it says I have to turn it up to ten where I can hit it at one no joke I hope I can get a handle of it

@josemadu-it7wn 6 лет назад

I can't update the atrag

@pizzacheeseman2854 Год назад

How is your cursor free to just click on stuff?

@zahwa242 3 года назад

Nice, now i can snipe with my Rpg-7

@jackthevagabond2669 3 года назад

Fun fact, RPG-7s follow roughly the same trajectory as a 7.62x39, your standard AK-47 ammo. There could be a setting on the calculator for it.

@thatduckieYT 7 лет назад

How do you set this whole thing up? Could you make a set-up video?

@fairTX 7 лет назад

you mean the props on the map?

@thatduckieYT 7 лет назад

fairTX props, AI, player items. I can't seem to edit what my player would have so I just end up playing as one of the npc snipers and I can't edit the items they have as well.

@hbm3dia 7 лет назад

what are the default keys to change the kestral's screen to user 1, 2 etc? i can bring it up but can't interact with it.

@fairTX 7 лет назад

well you need to check your keybinding for 'open kestrel' (i think that's how its called) and not 'show kestrel', because the latter only brings it up for a quick check.

@hbm3dia 7 лет назад

thanks for the response. another problem I've encountered, however, is that I do not get the option to "update" the ATRAG as you at 3:02. is this normal?

@fairTX 7 лет назад

hmm... have to check

@airshark2764 7 лет назад

yes it is normal they remove the update button becase it updates auto no needed and i have a problem how did you set the -1.1 6:04 i mean i dident get it how do you know that ?is marked on the AtragMX .

@nekitamo9558 2 года назад

Can someone help me? When I go page up i get to change the meters for some reason?

@swiss8988 2 года назад

You need to use a scope compatible with Ace. All of the RHS ones I've tried are compatible.

@MarkConway4411 2 года назад

What map are you playing on?

@krabistheisopod1376 5 лет назад

What map is this

@unasampson8052 5 лет назад

My ATrag is not connected.

@a.behringer177 7 лет назад

I do not get the update tab on my ATragMX anyone know why?=

@landontruong6156 7 лет назад

Bug Generation Me neither, I'm missing 3 slots. Two in "Lead" and one in "Elevation"

@LWlps 7 лет назад

I think its automatically updated

@awizor 6 лет назад

Outro song name pls?

@enestezcan9680 4 года назад

İn atrg its not have a uğdate button

@1stWarlord 7 лет назад

What can I do if the ammunition I'm using ( .50 BMG M33 ) isn't on the list ?

@fairTX 7 лет назад

try to experiment with different ammo types, like 12.7x99 because that's .50cal. your other option is to test the range and knobs manually and them write them down for yourself

@Skyried 7 лет назад

I could also teach you to do it by hand, the only fashioned way with paper, pencil and a range card xD.

@phila8627 4 года назад

@@Skyried I'm down to learn that way. don't mind this way (also the best for my spotter) but If I can eliminate some key binds (so im not sitting up on accident or ffs throwing a grenade lol) thatd be a plus.. last thing I wanna do is get my guys killed or need them to set up a rescue team to pull me out.. our milsim units been doing great lately so if I can add an element with your help better understanding how to do these adjustments via pen n paper id greatly appreciate the help and ur time .

@Skyried 4 года назад

@@phila8627 sure hit me up, pm me or hit me up on discord / steam!

@phila8627 4 года назад

@@Skyried tatt2ed13#9479 is my discord info. I'd be down to pick ur brain when able . tyvm

@Zerocool_GA 7 лет назад

I made it 3.5 min. just couldn't do it. you guys who play this are some serious fellas. wish u all the best. just not my cup of tea.

@fairTX 7 лет назад

oh but, i don't play milsim :) but i like to know stuff :D

@Zerocool_GA 7 лет назад

Yeah I liked the exile apocalypse beginners guide you did. I'm sure mil Sim guys will see this and appreciate it very much. I know I would if I was to play with those mods.

@fairTX 7 лет назад

thank you sir!