Arrma Kraton 12s MAX4, RCP Mount, 800kv and Sypom 6s batteries, WOW

Подписаться 74 тыс.

Просмотров 24 тыс.

50% 1

WOW Can you believe it did those??? This mount fit great and these batteries are NICE!! Links are below for the mount, batteries truck and all, use them to help support Exocaged RC, thanks!!!
RadioControlPower.com
Max4 Mount for the Kraton/Outcast 8s
www.radiocontr...
RadioControlPower mount on Ebay ebay.us/gewB7O
Sypom 6s Batteries used in this video, the pack a PUNCH!!
Amazon amzn.to/3AtPHN0
Hobbywing Max4 ESC use EXOCAGEDRC on hobbywing direct for 10% off
Hobbywing Direct
Amain
Amazon amzn.to/3AuqBxB
Ebay ebay.us/zoK3zF
45t Mod1 gear
Ebay ebay.us/LaeyUK
Arrma Kraton 8s
Amain bit.ly/3M9EHIi (Green)
Amain bit.ly/3yAmOOK (Orange)
Horizon
Amazon amzn.to/3QWjzr3 (Green)
Amazon amzn.to/3QM6Zdy (Orange)
Ebay ebay.us/pG6l3E (Green)
Ebay ebay.us/Y3CPhY (Orange)
Proline Badlands MX43
Amain bit.ly/3hJ8jzO
Horizon bit.ly/3bbt0TV
Amazon amzn.to/3dsj3Cq
Ebay ebay.us/nXrRuA
Flysky GT5
Amazon amzn.to/3QvP9ft
Check out my new Affiliate website at www.ishop45.com I have a bunch there including Walmart, Amazon, Ebay, Amain, Horizon and more, just click the store you want, and shop as usual, thank you guys!
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Amain Hobbies bit.ly/3cHmsHX
Horizon Hobby bit.ly/3tMTCB5
ArmedAmericanSupply (Clothing)
Buck Knives bit.ly/3yCoXZK
EMP Shield bit.ly/3Q7dMPE
HenyStar (Womens Clothing) bit.ly/3y7jDw2
BeardBrand (BeardStuff) bit.ly/3xD6af8
Maui and Sons (Surf Apparel) bit.ly/3aD4Z7Q
HeadBanger Lures (Fishing) bit.ly/3MIFpvZ
Harrelson (CBD) bit.ly/3NxQBLY
Luxury Yacht Vacations me160.isrefer....
Get Upside, I use this every time I fill up and just let it earn and fro till Christmas time and cash out. It works and once you get used to it, it’s an easy habit.
Click this link or use promo code 9H6W8 to get an extra $2.22 bonus the first time you make a purchase. upside.app.lin...
#max4 #arrma #rctruck

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@joshchatwin8569 2 года назад

Awesome stuff atleast someone is experimenting with the max 4

@teslacybertruck750 2 года назад

Well you think is that cheap or what?

@reconrc1787 2 года назад

I put the Max4 in my K8 a while back when the max4's were released. Running 12s in the k8 has been very problematic. Even with upgraded MC2 and vitavon parts, drive shafts etc. The truck can't handle the power and has been breaking parts like crazy. You sure can't bash it like you did when Running 8s. I also used the same ebay esc mounting plate. It works great!

@travis-tg5cq Год назад

it’s really that bad ???

@reconrc1787 2 года назад

It's really funny, your setup is almost identical to mine. I ordered the same 6s batteries a while back on of Amazon. They were ofering a $20 off coupon for the set. The people selling the batteries are great to do business with. I had one battery have an issue and they sent out a whole new set. I have the same esc mount, motor etc. I am running a 33T pinion gear and 39T spur at this time. The max4 on punch 10 is really hard to drive because the punch level doesn't hit right away. There's a few seconds of delay. The xlx2 actually has more throttle response and pop on 8s. Like I said in my previous post, the running gear parts, drive shafts, diff gears etc are something your going to need a lot of. My truck eats the drive shafts, axles and gears for breakfast. Oh the other thing you almost have to get right away is the aluminum diff cases if you don't have them already. The 12s power will end up snapping the diff case nipples that go into the holes on the main gears. Then the screws will put too much pressure on the main diff gears and wear out the scew holes on the main diff gears. It ends up being a big mess. I also have broke countless teeth off the diff gears at this point. SMH.

@ExocagedRC 2 года назад

Great info. I’ve got Vitavon diff cases in the outcast 8s along with bulkheads. I may have to do the same here. On punch 5 it’s just mild enough (it seems) to be ok but still double backflip. LoL I had to do the diff cups on the O8s because I kept killing them with the XLX2/1100 in there. Also I’ve wasted a bunch of the axle shafts too.

@casconie 2 года назад

love the slow-mo & audio 👍

@kwesismith4684 Год назад

Loving all the content sir, as I'm fairly new to the hobby but have been passionate about it for longer, I must tell you how much your channel and others like it have saved my pockets$, keep up the good work 👏

@SteelCityRC 2 года назад

Awesome man! 12S is something every man needs to experience. Great vid 👊🤘

@robertb.4202 2 года назад

That is some insane power! If anyone complained about the 1/5 scale Arrmas being slow, then they need to go 800kv or lower. They will be singing a different tune.

@andyb9994 2 года назад

Don't need to tell me when the driving starts, I watch start to finish...very cool Kraton....very nice and neatly done, very simple....I think it will be reliable also...👍

@cliffordaldrich4189 Год назад

What can I say? Another great video. I just saw this one, but thank you for posting the link to the ESC mount . I have a Outcast 8S and and I might do that 12S conversion. But 1st, I have to finish the DBXL-E 2.0, 12s conversion. Thank you again for the videos. I enjoy watching them.

@NepDouble07 2 года назад

Finally, something I can stick in my outcast 8s EXB with tons of power that won't explode.

@GazooRC 2 года назад

Glad to see you finally put the max 4 in the Kraton. Wasn’t as glamorous as I thought it was going to be. Looking forward to a speed run though. Impressed nothing broke. Another great video bud. 👊🏼

@sonnice1 2 года назад

Great vid!! I was running a 400amp flier in my Dbxle 2.0 it had power but I didn’t like it, it wasn’t efficient with the power distribution to me and it was glitchy. Running a max 4 now and it’s a whole different world. Once again great video!

@ExocagedRC 2 года назад

Yeah man the Max4 although expensive, is my favorite big esc.

@1boyriding 2 года назад

What gearing are you running with that setup

@moereefer 2 года назад

Sweet I love that truck.. especially on that crazy MAX 4 ESC. IVE THE ARRMA KRATON EXB 8S I just need a bigger motor FOR IT. LOVE THE VIDEO 👍🏻

@mikebird8290 2 года назад

HI JOE THIS SYSTEM IS AMAZING. THANKS FOR SHARING SIR 🇬🇧🇺🇲🕊️✌🏼🤩👍🏼

@chrisbiddle6443 2 года назад

Lol love it I’ve built same with all Vitavon parts you can get 😊👍🏿

@ExocagedRC 2 года назад

I’ve got my outcast 8s all vitavoned out.

@chrisbiddle6443 2 года назад

Do the same to k12 👍

@Moggmodels23 2 года назад

Brilliant video mate love ❤️ the arrma kraton 12s lots of power great jumps

@alexanders-life Год назад

Nice 🤗 lovely car set-up

@carscoffee5263 2 года назад

Max 4 collection is an expensive habit, but we love watching it man lol 😂

@ExocagedRC 2 года назад

I need two more now. LoL. This was from the Xmaxx. 😂

@sypomlipobattery4796 2 года назад

Great video.Thank you for recommending the 6s lipo battery and it is so suitable with the 12s.

@jabarriley3799 2 года назад

Great video and thanks for all your info ...

@EJ-74 2 года назад

That thing is a BEAST 🔥 I bet if ya turned the punch up a bit you could get a double off the jump on the track and that's insanely awesome 😎

@jebus5656 2 года назад

Try swapping end plates and rotors, could make the other motor sensored

@WoodsUnknown 2 года назад

this would look great with a stretched chassis. awesome video Exo.

@jerryvolpini7987 2 года назад

12S - sheer insanity! Keep it up, sanity is overrated, lmao 🤣

@craigh79 2 года назад

Feeling that joy at the end solid run and it still runs 🤟🤟🤟🤟 clean up only days rule.

@dirtrider88 Год назад

i love your channel. its one of the best RC channels but i HATE the slo mo

@alankowalski8781 2 года назад

I loved my max4 in my K8 before I folded it in half🙄

@WuDidit412 2 года назад

I got the mount 👍🏿 and Esc 🤩 waiting on batteries 🤦 I’ll get there…. 🤘

@ExocagedRC 2 года назад

Awesome!

@camrowdrone6497 2 года назад

Nice driving 🤩👊🏻👍🏻

@kaiarneberg9203 2 года назад

More videoes of the K8!! 😍

@ExocagedRC 2 года назад

I got more on the way

@kaiarneberg9203 2 года назад

@@ExocagedRC yeeeaahh 😁😁

@terrynicewonger5434 2 года назад

New max seems to be a very good high power option

@donniemarks94 2 года назад

Looks like it had plenty of power on the current punch setting and running cool

@khyleebrahh7 Год назад

The Max 4 esc is supposed to be used with 600kv or lower

@thebigkingshow2983 2 года назад

Never seen a K8S flip like that!

@MZBallistic 2 года назад

So the Max4 sensor wire is compatible with the castle 2028 ?

@manuellutkedreimann7805 Год назад

I would not do that because the Max 4 is for Motors with Max 600kv and the 2028 has 800 or 1100kv. Better Use the hobbywing 70125😁🤙

@NCMOUNTAINSbackyardRC 2 года назад

Man that’s so cool!! 👌

@jackfrosty24 Год назад

decent setup and jumps well :)

@jamesmower1852 2 года назад

That's funny you mentioned the Yamaha raptor 660 that was the last four quad I have but yeah they're kind of outdated I've got a player sportsman 1000 and I swear that big heavy four wheel drive pulls just as hard as that raptor did

@ExocagedRC 2 года назад

I drove one a few times and that motor had a lot of rpm’s to give.

@jamesmower1852 2 года назад

@@ExocagedRC I assume you're talking about the raptor when you saying a lot of RPMs to give yes for a engine of that size quite a bit RPMs but then again a lot of single cylinder engines will tack pretty high if you want to push them

@craigengelman4534 2 года назад

@@jamesmower1852 back in 1994 i had a 87 quadracer 500 i built for mud bog racing . wisco piston , port and polished the jug , boyseen reeds , flat slide carb , and fmf gold pipe. with a 50 shot of nos it would skim the whole track . only big mod was adding 12 inchs to the swingarm and i ran skat trac v paddles . that motor had it last rebuild in 2006 now it has a 99 artic cat 1000 triple 2stoke kicking 240hp

@jamesmower1852 2 года назад

@@craigengelman4534 I've been riding snowmobiles my whole life when I was 16 years old I had a zrt 600 triple pipes and jetted when I was 13 my dad had a quad racer 500 quadzilla I rode that thing everyday when I was 13 those go pretty good I've wrote a lot of fast machines when I was 18 I had a Kawasaki ZX 1100 Street bike I've had dune buggies with street bike engines dune buggies with snowmobile engines I've had Honda 250R three-wheeler and I had a four wheeler I've rode dirt bike to my whole life there ain't many ATVs dirt bikes that you could mention that I haven't at least drove when I was 12 years old I could strip a whole snowmobile down to nothing nuts and bolts and put it back together in less than 48 hours

@jamesmower1852 2 года назад

@@craigengelman4534 and I never owned a banshee but my buddy owned a banshee that was about 170 horse the road just about anything you can imagine anything from 50cc dirt bikes to heavy machinery

@blacksheeprc8113 2 года назад

Amazing

@kenneth4098 2 года назад

What a monster 💀

@adamatkins8791 2 года назад

Awesomeness

@KDawg09 Год назад

This is sweet!! Do you have a build list?

@ExocagedRC Год назад

Well. Kinda everything Vitavon and the Max4 system.

@johngookinsable 2 года назад

That's what she said!

@ExocagedRC 2 года назад

😂

@MajorStaticX 2 года назад

lol Holy Crap, That looks too Fun lol

@odaytim8321 2 года назад

Thanks for sharing the Mount and nice video what Gearing are you running?

@Avankaurparmar Год назад

Hey Joe what u think of this mount now after so many months are u still running it?? I got 1 and in 20 mins and less than 5 jumps the screws all backed out between both plates and my max 4 was flopping around. I don't think thus is a very good product for bashing mabey speed running sure can u do a review or do u have some tips of how I can fuse them together other than with zip ties lol!!!

@clairecooper3848 2 года назад

I would love to know what the running weight of the Kraton is now 🙏 Sure looks smooth on the pickup 🏎💨

@ExocagedRC 2 года назад

Hmmm. I’d have to check. Esc is heavier and batteries too.

@clairecooper3848 2 года назад

@@ExocagedRC ooo please do 🙏

@old-rcplane-phart 2 года назад

I hate it when my SHAFT gets bent🤯

@ExocagedRC 2 года назад

😂😂

@chairidden Год назад

What gear ratio are you running? I've scanned though the comments to see if you've already mentioned it but if you did I missed it

@ymollier 2 года назад

Great setup. Did you notice run time improvment in 12s ?

@manuelschwinger375 2 года назад

Hello What Pinion/spurgear you have installed on this video? Thanks

@Ev0ltion Год назад

Hello can you tell me if the botom of the max4 ESC is made out of aluminum or plastic? Im curious id it radiates heat and is there a benefit of mounting it directly tot he 5ive chassis.

@ExocagedRC Год назад

aluminum

@Ev0ltion Год назад

@@ExocagedRC Entire bottom half of the case? Not just that little radiator in the middle?

@patricklavoie8719 2 года назад

Awesome!

@kylekruger1848 Год назад

What size spur and pinion you got going on?

@curtishubbard907 Год назад

Will the motor from the max4 combo fit the kraton 8 s

@andrewtexiera2858 Год назад

I have a fully built one also would love to see you rip my truck man I’m local let me know when u got the next meet up I got a ztw esc 530kv leopard motor full vitavon everything besides rims

@adamgandy6470 2 года назад

Posting videos late as hell what you doing awake at this hour 🤗✌️🙏👍💯🍀❤️🙌☝️

@jebus5656 2 года назад

Not late, early.

@ExocagedRC 2 года назад

LoL I upload these days or sometimes Weeks before they are released and I schedule them for 5am my time. I do have to get up for work around that time as well so I’m kinda up.

@Mr.Wednesday. Год назад

Can you please tell me where to get those wheels

@oehlweinboote Год назад

I bought a Kraton EXB 8s with some vitavon parts (installed) from a friend quite cheaply because he gave up the hobby due to lack of time. He built in the following combo: Max 5 controllers, 800 kv motor and a pinion of 39:39 The car must have weighed around 25 kg! So far so good. I have a Hobao hyper ss with the following combo Max 8 controllers, 200 kv motor and a 14 pinion. Weight: 5kg I want to get to the following: do I want to turn the Kraton into a fast, lively Hobao, of course always in the ratio of 5 kg to 15 kg. What do you think I should do: A) if I leave everything the same in the Kraton, drive with 8s and only put in a Max 4 controller with 300 amps... ? Would anything change there? B) if I put the Max 4 controller in the Kraton and would drive the same motor (800kv), which pinion would be suitable. Main gear: Motor pinion: C) Max 4 combo with 560 kv motor... pinion? I look forward to hearing your thoughts/ideas

@andrewtexiera2858 Год назад

Main gear depends on if ur bashing with it or want to do speed runs if u want a mild 60-70mph just gear it 23/39

@Bawla187 2 года назад

4 max 4's!? Exo wanna sell any of your max5's🤣

@ExocagedRC 2 года назад

You should see my “spare” esc bin… problem is I don’t know what I’ll build next. There are two XLX2’s in there now…

@randall4411 2 года назад

Sure looks like it's hitting hard with the added Weight . Better order extra parts .

@ExocagedRC 2 года назад

It’s landing a lot softer than my 12s Xmaxx 😂

@ImThatGhostz 2 года назад

I wish someone would make better axle pins, i break mine all the time. Even using the m2c overkill shafts

@scottmawe2448 2 года назад

I got 73 mph with same combo but only 30 teeth on pinion.

@ExocagedRC 2 года назад

What size spur?

@scottmawe2448 2 года назад

But I'm also running proline belted tires because stock are uncontrollable.

@GarcBomber 2 года назад

Are the center dogbones the same diameter as 6S Arrma? They look like toothpicks 😕

@ExocagedRC 2 года назад

LoL they do look small compared to the size of it all.

@GarcBomber 2 года назад

@@ExocagedRC they must have bigger ball ends and engagement pins. I just had a torsional shear twist with my 6S dogbones running on 8S so surprised to see Arrma used such small diameter.

@stonebraker100 Год назад

What connectors do you have for the battery and ESC? are you using QS8 or XT90

@maykwolf8847 Год назад

Qs8 laut dem Video und Verbindungen. Xt90 wäre doch gelb oder?

@RuisRcAdventures 2 года назад

Can i ask what servo saver you're using Joe? My friend Jake has a Kraton 8s Exb and he's finding it hard to set his steering correctly. I think the stock servo saver is crap and its really hard to set it up right, he always gets a bit more steering to one side despite trying to set the end points several times. Thanks 👍

@ExocagedRC 2 года назад

This is a Hotracing servo saver

@ExocagedRC 2 года назад

bit.ly/3puwc0w

@RuisRcAdventures 2 года назад

@@ExocagedRC thanks buddy!! 👍👍

@onemansvideos2134 2 года назад

thats how the kraton should be not 12s but just that whole run.....oh your center rear has a lil wobble

@ExocagedRC 2 года назад

Yeah. When I got my other Kraton new all the shafts had. Wobble. It’s funny because replacement shafts are straight.

@teslacybertruck750 2 года назад

I love the content

@ExocagedRC 2 года назад

Thank you buddy

@Jay-cv8vb 2 года назад

What gearing where you running?

@mlentsch 4 месяца назад

top speed??

@JoshSmith-ud1ij Год назад

You can do backflips on 4s lol. Tune it so you can punch it and hold it to top speed without a wheelie or tire spin. I can’t help it. I do 0-60 on all setups . Limitless in do 0-100 0-top and 0-top to a stop little footage as possible. Any truck will wheelie. Just stiffen the back pre load. Making to power usable is more entertaining IMO. Badass truck no doubt though. Nice job

@old-rcplane-phart 2 года назад

Lose a ton of power outta brushless motors without being sensored. + motor will not ever reverse from a dead stop to full throttle. (Sucks when that happens during a sanctioned state race clearing a quad🤷‍♂️)

@ExocagedRC 2 года назад

Yeah I put the sensored in here for that and I wanted to try the adapter plug and it works!

@old-rcplane-phart 2 года назад

👍😀

@dadario1946 2 года назад

😍😍🚀😱

@alphaplus4162 2 года назад

I placed my order for one this Is just to incredible of a ESC to pass up unfortunately it's on a major backorder...... your video is making it sell out

@ExocagedRC 2 года назад

Dude I love these esc’s. They are available at Amain but no exocagedrc discount there. There is a link in the description. Sometimes I wonder if I do cause things to sell out. LoL

@alphaplus4162 2 года назад

@@ExocagedRC I'm in canada shipping adds a extra 80$ i may just have to cancel and bit the cost.

@alphaplus4162 2 года назад

I want to be the frist to break 120 mph on 1/5 scale.

@ExocagedRC 2 года назад

This can do it.

@russellturner579 Год назад

Whish I new how to do the mods I got like six trucks but the hobby store guy here litte on weird side I whish I new some body else I bought this truck for this reason had it three months have ranit