ARRMA Typhon GROM Goes Brushless... Again

Подписаться 2 тыс.

Просмотров 1,6 тыс.

50% 1

Today we're trying something out. I want to make out Typhon GROM Brushless without breaking the Motor Shaft. Last time we found out the hard way the Motor Shaft and Pinion are different sizes which broke our Motor. Well we're giving it another try and seeing if we can find a solution.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@RCRoads 2 месяца назад

Finding pinion gears can be difficult. Thanks for coving everything so well. Awesome setup.

@TestDriverRC 2 месяца назад

@@RCRoads fortunately I found one!! I’ll be making a new video on it soon

@mattmonster0503 15 дней назад

What’s the benefits of using the 2 in 1 system, just space? And if space is no issue wouldn’t it be better to use a separate esc ?

@TestDriverRC 15 дней назад

@@mattmonster0503 It saves space, combined units make it a lot simpler for install also. But yes I agree a separate system would be a better option in case one of the 2 units fail you can replace just that one. Plus the esc usually comes with its own cooling fan. ARRMA TYPHON GROM is very limited with space under that body

@Moggmodels23 18 дней назад

Hi buddy fantastic video I'm doing my brushless up upgrades had I speak. So what do I need I've got a 2835 2600kv brushless motor 3.175mm shaft and is it 18t 48dp or can I go higher on pinion. I tried putting the stock motor mount in with brushless motor and it's to far away that's on 20t I haven't tried 18t yet but it's a nightmare 😢😊😮

@TestDriverRC 18 дней назад

@@Moggmodels23 you’ll want the mesh to be as close as possible so I recommend a aftermarket motor mount And proper cooling. Make sure your pinion is a .5 mod so it’ll work perfectly with your spur

@Moggmodels23 18 дней назад

@TestDriverRC I've got the 22t or 20t 48dp pinion gear on a motor shaft 3.175mm if that's OK I bought a 40a esc which can run 3s but it's a flat esc on xt60

@TestDriverRC 18 дней назад

@@Moggmodels23 that sound like a Great Setup 👍 40a should get a bit warm on 3s so make sure to have a fan. I’d go with the 22t for better speed, the car will have great acceleration with that motor! 👏

@Moggmodels23 17 дней назад

Hi mate I've installed brushless motor 3.175mm shaft 2835 2600kv and using stock motor mount 18t I tried it and it's not right it's jamming up not sure why I can't mesh it up right any help will be appreciated 😀

@TestDriverRC 17 дней назад

@@Moggmodels23 you can email me pictures of your motor and pinion setup and I’ll walk you through the entire upgrade process with you! 😉👍 TestDriverRC@gmail.com

@Rcdriftynoob 3 месяца назад

Now I want to be a test driver

@TestDriverRC 3 месяца назад

@@Rcdriftynoob you can be a Back Seat Driver by Joining our Membership

@BumpierDrake960 3 месяца назад

I’ll be curious to see the temps of the 2n1 in the groom after a battery run through it… Well done test though. 👍

@TestDriverRC 3 месяца назад

@@BumpierDrake960 I made a video putting it against the lose mini b round 2 We ran a whole battery 🪫

@lilsmurfdawg 3 месяца назад

It’s a .5 by 2mm motor shaft and try Robinson racing pinions they have them

@TestDriverRC 3 месяца назад

@@lilsmurfdawg yeah I’m not sure why I had .8 in my head.. You’re absolutely right it’s a .5 I’ll definitely check them out!

@skyhawk21 3 месяца назад

You know like I did, buy cheap brushless 2440 or 2638 lowish kv motor and get hobbywing 30a brushless esc which is direct fit with stock grom mounts and pinions

@lilsmurfdawg 3 месяца назад

RRP1818 Robinson Racing Hard Blackened Steel Mini Pinion 2mm .5 Mod 18T

@Rcdriftynoob 3 месяца назад

Bro I want to drive it