Excellent and helpful video.. And just one question... Do you know if the Control accept double connection (Data Server and Ethernet connection) at the same time??
@@olegbeyzerman If you are using a FANUC 16/18 Series control you will have the following; CNC Memory % O1(MAIN PROGRAM) N1 M198Pxxxx (DATASERVER CALL) M30 % Dataserver % O1234(PART PROGRAM) N101 (PART PROGRAM HERE) M01 M99 % The Pxxxx will represent the O number program on your Dataserver (for example O1234 on your Dataserver needs an M198 P1234 call as shown above). That O number program needs to have an M99 at the end, not an M30. Also, you will need to set your I/O Channel to 5. If you are using a FANUC 30i Series Control (30i, 31i, 32i, etc…) There is no need to call as a sub program unless you want to. The newer controls allow you to run the program from the Dataserver with no sub-program call needed. Also, no need to set the I/O Channel to 5. It can stay what it is (usually 4 or 17 for CF Card and USB respectively).
Hello, thanks for the helpful video!!! Is the first “built in” Ethernet port the embedded Ethernet soft-key? Is there also a way to input tool data into the “tool manage” page in the setup tab via g code? I know the H parameters can be entered by G10 G90 L10 Pxxx Rxxx.xxx G10 G90 L12 Pxxx Rxxx.xxx I ask this so I can pre-populate the tool table at the start of the NC program to save time and errors by the operator typing in values.