Astra H Car Radio Divorcing - CD30 Divorcing and CD70 Marrying 

От някой дилър на Опел. Таксуват те 50-60лв и ти го казват. Или трябва да го прочетеш от паметта на радиото или дисплея или друг модул. Но това с четенето си е играчкаа

Здрасти! За съжаление видеото го качих преди доста години и честно да ти кажа нямам спомен дали може или не...

​@@icku а да те питам ако си купя cd30 mp3 с дисплей свален от една и съща кола, ще има ли проблем с това да го прехвърля в моята кола и след това да си го препрограмирам за да отговаря на екстрите или трябва да намеря кода му?

Най-добре си намери такива с код(car pass). Има начин да им извличаш кода от паметта. Даже имам и видео. Ама ще се вкараш в такива филми. Има толкова много Astra H за части - най-добре си търси такива развързани от колата и с Car pass.

@@icku благодаря за информацията 👍🏻😊

Me pasa igual

Salut frate! Vad ca ai scris aici ca esti posesor de astra GTC. Ai facut pana la urma schimbarea de la CD30 la CD70?

@@petru_idk6245 n-am mai facut trecerea. A venit bebe si am avut nevoie de masina mai mare

I have the same problem.did you find any solution?

You have to divorce your old radio from your car and display. Then you can marry the new radio to car and display. For all this to happen you have to know the Radio code for the new radio and your Car pass. Also you need Opcom.

You need to tell the CD70 and the new display that your car has ECC.

Здрасти, не предлагам. А и вече нямам тех възможност, защото успях да изгоря моя.

I'm pretty sure i have driven my car without the speedo and no issue to start it. The problem is more complex - maybe that speedo connector is making intermittent contact and generating error codes that are bugging the ECU. Why not remove the speedo and try to start it like that.

@@icku I have m8 with no joy. Iv Read that the speedo is a part of the immobiliser, and that the radio, screen and speedo are all paired and there's a chip soldered to the speedo board that passes all the info to the ecu about millage etc and holds a security code that needs to match all 3 for them to work properly but can be changed by tech 2

@@icku and its weird that it only stops working after you lock and leave the car and wait a min for the immobiliser to start working then unlock the door and the speedo should light up and turn off the immobiliser but most times it won't work but if I don't lock the door and just shut and open it or turn the ignition off and back on it always works 100% of the time. It seems that locking the door and setting the alarm/immobiliser is cutting it out (you maybe right about a short but only when the immobiliser is set) but why would it start working again by disconnecting and connecting the conector multiple times?

@@darrenmicklewright2008 Hmm is this a model with keyless access?

@@icku yes

So the carpass is also the radio code? Or you need to generate a radio code with the help of the car pass via a software?

@@stefanp.7986 carpass is radio code.. they share same code

Ами по-подробно от това видео... Знаеш ли Car Pass-а на Корсата?

@@icku да, имам го

@@jordannedkov3258 За развеждането следваш стъпките от началото на моето видео. Но не мисля, че ти трябва. Освен, ако не искаш да продадеш стария си дисплей и да е разведен от колата. За самото оженване - ето една доста описателна темичка: www.opelclub.bg/index.php?showtopic=90010. И провери за някакви грешки или разминавания в Mid-speed and High-speed canbus configuration, че са супер капризни. И следи дали приема кодовете, че да не активираш излишни таймери и да чакаш.

Just follow the steps in the video.

@@icku i have doing the same things but i see you have not deactivated the cid display in first time same i try a couple times deactives the display but i see always O.K security code is activated ? I use a opcom china clone 2010

@@dr.einstein. Do you know the correct code for the CID?

@@icku you mean carpass security code?

If you are installing CID from other vechicle there is a possibility that it hasn't been divorced. You will need that code too.

Sure it will. It's the same radio and display.

Its a china clone. I got it from my local reseller in Bulgaria

Hello again pal, thanks for your reply. what software version are u on?? i am on the 1.59 but it does not have the option to activate and deactivate the anti thief protocol for the display. is there anyway to do that ?? i have a GID display which i would like to install but i am getting the safe display message??

@@waynewatson5437 the software is 150406b version, the firmware is 1.64