Atomos Ninja V vs Shinobi - Best HDMI Monitor?

Подписаться 6 тыс.

Просмотров 10 тыс.

50% 1

While the Atomos Ninja V is a great HDMI recorder, how does it stack up against the Shinobi as a monitor? I show some of the differences you need to be aware of and one thing that might make you think twice about choosing the Ninja V over the Shinobi as a monitor!
Kit shown in the video
----------------------------------------------
Atomos Shinobi - geni.us/AllxdBw
Atomos Ninja V - geni.us/EuxLa
AndyCine Lunchbox Caddy - geni.us/RxCBmxq
Samsung 1TB T5 (stripped) - geni.us/ICAN7
8K HDMI Cables - geni.us/j6hg9N
DSTE NP-750 Batteries - geni.us/4Oyt
Kit used to shoot the video
----------------------------------------------
Sony FX3 - geni.us/Mc4njM
Sony 50mm GM Lens - geni.us/NRL7d
Sony FE 35mm - geni.us/4q4LaB
Tiffen Black Promist Filter 1/8 - geni.us/0yLR5
Rode NTG3 Mic - geni.us/rYH3
My FX3 Rig
----------------------------------------------
Sony FX3 - geni.us/Mc4njM
Sony 50mm GM Lens - geni.us/NRL7d
SmallRig half cage - geni.us/No7EPwh
SmallRig handle extension - geni.us/uenOVz
SmallRig 6" carbon rods - geni.us/EheyP
SmallRig 4" carbon rods - geni.us/tnQgRS2
SmallRig rod clamp - geni.us/iNBIW
SmallRig HDMI cable - geni.us/fDAy9XK
Nitze monitor mount - geni.us/VIGVG9
Sony mic spacers - geni.us/LChTC6B
Atomos Shinobi monitor - geni.us/AllxdBw
Sennheiser MKH416 mic - geni.us/WeoR8
AngelBird 128GB V90 Cards - geni.us/z0p6
Table of Contents:
----------------------------------------------
00:00 - Intro
00:08 - Ninja & Shinobi Introduction
01:25 - Tech Specs
03:06 - Heat & Battery Life
03:48 - Monitoring Tools
05:46 - Working with LUTS
07:13 - Conclusion
Links
----------------------------------------------
Supporting Blog Post - www.pauljoy.com/2021/12/atomo...
HashTags
----------------------------------------------
#Atomos
#NinjaV
#Shinobi

Наука

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@skymakai 2 года назад

I was thinking of making this same comparison video, and you covered this wonderfully! It's such a huge oversight that the Shinobi has RGB waveform and histogram and the Ninja V doesn't... the 5% steps for Zebras really suck, and having LUTs affect the waveform (with no option to disable) is also a real pain.. I brought this to Atomos' attention years ago. I often go for my Shinobi instead of the Ninja V for the longer battery life, when I only need a monitor. I wish the Ninja V could function better as a monitor like the Shinobi.

@PaulJoy 2 года назад

Yes I'm not sure why they work differently, it does make it confusing if you're using both at the same time! You'd think with all the extra heat and battery usage of the Ninja V it would be as powerful as the Shinobi but maybe they have to limit its functionality to maintain recording throughput. That would also explain the drop in resolution / quality of display with the tools I guess too. I'm not sure if the Ninja+ is the same in this regard, it would be great to try one and compare it.

@denisiacono134 2 года назад

Great video Paul as always !

@PaulJoy 2 года назад

Thanks Denis

@dwpix 2 года назад

I am so glad I found this video. I am about to buy my first monitor and I am so glad I learned about the possible LUT/exposure tools situation. Only problem is trying to find out how other monitors handle the same situation. The Shinobi looks great! … but I am also looking at the OSEE T7. (I am wondering if the OSEE T7 works like the Ninja or the Shinobi). Thanks for the warning!

@PaulJoy 2 года назад

I've not tried that monitor Darrell but either way actually works fine as long as you understand what it's doing. I do prefer to use the LUT as a visual reference and not have it effect the tools though.

@lonewolfsmoto 2 года назад

So helpful! Thank you for this!

@PaulJoy 2 года назад

Glad it helped, thanks for letting me know

@PaulJoy 2 года назад

I've only been using the Ninja V for a few weeks so I might be missing something, let me know if that's the case. I haven't seen anyone else mention the way it handles LUTS as being strange which seems odd as it's been available a long time now.

@OmniVisionElite 2 года назад

Thank you for sharing this info!

@PaulJoy 2 года назад

Glad it was useful, thanks for letting me know.

@GeraldBertramPhotography 2 года назад

Great video. I love seeing another Ninja shooter using the Lunchbox!

@PaulJoy 2 года назад

Thanks Gerald. Yes, it's working well so far although I have to say I didn't enjoy breaking up a brand new T5 drive!

@GeraldBertramPhotography 2 года назад

@@PaulJoy Oh man ..I totally agree. Once I freed the T5 drive from the housing I had this feeling of "What did I just do...."

@PaulJoy 2 года назад

@@GeraldBertramPhotography Ha, Yes I was fine taking it apart but then peeling off the thermal pad thingy i was convinced I'd taken some of the tiny capacitors with it and felt a bit sick! I did consider making a video about it but decided I couln't handle the responsibility haha.

@GeraldBertramPhotography 2 года назад

@@PaulJoy lol Yeah I took that plunge! Everything in my video on the Lunchbox was me doing it on the first try. That video could have gone very badly but the folks at AndyCine assured me everything would be fine and to their credit it did.

@elementary8963 Год назад

I noticed the Ninja V False Colour/LUTS issue earlier today - but haven't found anyone talking about it until this video (thank you) - let's hope Atomos sort this in a firmware update!

@PaulJoy Год назад

Yes an option to put the tools pre or post lut would be a great addition.

@peterstrachan3609 Год назад

Great video! The LUT and zebra limitations you’ve expertly highlighted also makes it impossible to ‘match’ the NinJa V with the screen on a FX3. But the exposure lowering when a LUT is switched on is a serious issue. Atomos really should sort all this out asap if technically possible. Did they ever get back to you? I’d already bought a Ninja for the recording capability but now that I have a FX6 and a FX3 it would be nice to think it’s image/zebras etc can be matched with a Shinobi. But, as you’ve shown, it won’t. Grrrr! The analysis screen would be handy to have on the Ninja too.

@PaulJoy Год назад

Yup, it would be great to see Atomos add an option to run exposure tools pre or post LUT.

@ArsyadAbiyoga 2 года назад

The exposure change with the LUT turned on seems like a deal breaker to me. Is the Ninja’s firmware up to date?

@PaulJoy 2 года назад

Its fairly easy to work around once you're aware of it, it's just a little frustrating that it works differently to the Shinobi, especially when working with both on a shoot.

@chi.marvine Год назад

Hi Paul, for the Shinobi did you have to use a the Calibrite ColorChecker Display before using it or is it useable out the box and that’s just for maintenance of colors after overtime use

@PaulJoy Год назад

Hi Marvine. I only use the checker for grading footage or to set white balance in camera. The Shinobi is pretty good out of the box however it’s not perfect. You can however calibrate it if You have a digital colour checker device.

@coloredcatpictures1231 2 года назад

Does the Shinobu give you the ability to use the tap touch screen focus options as on the fx3 screen? Any camera control options? Thx

@PaulJoy 2 года назад

No, it just displays the HDMI signal from the camera. That would be a cool feature though!

@mojojeff 2 года назад

I just tested the Port Keys LH5P. It is similar to the Shinobi but with wi-if and a metal case. I found the interface out dated but it was a great monitor with a claimed 1700 nits. In the end, I sent it back. It is hard to give up the touch tracking feature I get with the Monitor+ app and my iPhone. (Sony A7Siii and iPhone 11 pro) The Monitor+ app does have a couple of drawbacks. It needs to be reconnected any time you turn the camera off and there doesn't seem to be a focus zoom feature.

@PaulJoy 2 года назад

Thanks for that, the Monitor+ app sounds interesting, I'll have to check it out.

@ekphotography 2 года назад

I tried the free Monitor+ App on my FX3 but it cuts off every 10 seconds or so and I have to do the QR code every time to reconnect... Any suggestions ? Looks great but I cannot get it to stay connected...

@PaulJoy 2 года назад

@@ekphotography I've not tried it yet but could you be in an area that has strong wifi interference? I use the imaging edge app for photography sometimes with my FX3 and while it's generally solid there has been a couple of times that the location really slows it down.

@ekphotography 2 года назад

@@PaulJoy Imaging edge is quite bad actually and the reviews for Monitor+ is WAY better apparently. I did not have wifi problems. Just the camera disconnects after a few seconds for some odd reason which makes me hesitant to get the paid version.

@PaulJoy 2 года назад

@@ekphotography Yes imaging edge is dreadful as you cant even view exposure on it. I'll have to try Monitor + and see if I see the same problem.

@tiimage9010 2 года назад

Dear Sir Shinobi could i use with Nikon Z6ii to record footage N-Log? Thank you

@PaulJoy 2 года назад

The Shinobi doesn't record at all, only the Ninja will do that. I would imagine the Ninja will work fine but I don't have that camera so can't say for sure.

@shyland20 Год назад

didn't understand how the lots working. is the monitor changing the lot will be recorded to the sd card of the camera? lets say i have a lot i install name "bvlgari" on the shinobi now the camera will record the footage with this lot to the sd card on the nikon?

@PaulJoy Год назад

Any LUT on the Shinobi will have no effect on the camera. All a LUT is doing on the Shinobi is changing the way the image looks on screen. As for the camera, I've not used Nikon cameras for video I'm afraid so I'm not sure if they have the ability to burn in or save a lut to the card.

@bettadenu7 5 месяцев назад

Hi I’m sort of new to using monitors and I picked up the shinobi but I’m just having issues with the battery side of things ? What type of battery is best for the shinobi and what is the battery pack that came with the shinobi I’m so confused

@PaulJoy 5 месяцев назад

They use Sony NP-F style batteries, there’s loads of third party options on Amazon and eBay. They range in sizes from something like an NP-F550 up to the the bigger NP-F970 batteries. I’m not sure what you mean by the included battery pack, maybe it’s an adapter for powering the monitor from an external power supply?

@israrhussainaquarius 2 года назад

Hi, can you tell me if atomos shinobi 5" works fine with canon eos m5 and m6. Thanks alot 🙂

@PaulJoy 2 года назад

I don’t have those cameras I’m afraid

@thiagomarciel210 Год назад

I use the rule of 3rds grid on my camera screen and when i use my Shinobi, the grid doesn't show in the monitor screen. Is there any way to make them visible on the external monitor? Thanks

@PaulJoy Год назад

You can send the full display UI out but that will disable it on the camera and make the image very small on the monitor. There’s also some things that don’t show like zebras so I’m not sure if the lines are visible. A better solution is to just use the guides on the Shinobi.

@schoeferfilm 2 года назад

Great video Paul. Thanks for all the info. I have the FX6 and would like to get a shinobi. Am just not sure if it should be the 5 er or the 7 er what do you think 🤔 sub from an older german RU-vid filmmaker

@PaulJoy 2 года назад

Hi there, thanks loads for the sub. I guess it comes down to portability more than anything. The FX6 is a very compact camera and the 7 may not be as practical if your shooting events, doco or just like lots of camera movement. If you're in a studio or the camera lives on sticks then 7 would make things easier to see, especially for those of us with seasoned eyes :)

@PaulJoy 2 года назад

Saying that, I think both are lightweight so I guess it comes down to whether or not you can handle a bit more space being used up on the camera.

@schoeferfilm 2 года назад

@@PaulJoy thanks Paul 🙏🏻

@JaroslavBengl 2 года назад

Super useful info, thanks so much for sharing! 🤩 Liked 👍🏻 Subscribed ⭐️ It helped me a lot in making decisions Ninja vs Shinobi... (Shinobi!)

@PaulJoy 2 года назад

Thanks loads for letting me know.

@SergioPellico 2 года назад

I would need a SHINOBI but with HDMI output. Is there a model? Thanks!

@PaulJoy 2 года назад

The Shinobi 7 has HDMI output but then it's a little bigger and a more expensive than the Ninja V. It might be a good choice though and also gives you SDI in case you need it plus has two battery slots. A lot of people recommend the Small HD monitors, I haven't tried one for many years so it would be great to try one of their newer monitors.

@0newithmisery 9 месяцев назад

What if I record 4k@60p videos with my camera? Doesn't the Shinobi output any image at all then? Theoretically, the 60p signal would simply have to be output in 30p. Right?

@PaulJoy 9 месяцев назад

Yes it still displays as normal. ru-vid.comerTCEAQp_Z4?feature=share

@TehDrasticGamer 11 дней назад

Does the Ninja Flame have the same LUT exposure issues?

@PaulJoy 8 дней назад

I’ve not used the Flame so not sure.

@tristansachar 3 месяца назад

My false color doesnt change but the other tools do. Is this an update that happened?

@PaulJoy 3 месяца назад

Not sure what you mean?

@_adamdunbar Год назад

If I'm filming 10-bit, 4k, 50fps on my Sony FX30, will I be able to view what I'm recording on the Shinobi monitor?

@PaulJoy Год назад

Yes you can.

@sdave96 9 месяцев назад

@@PaulJoy I own a Sony A7IV and was wondering if I can view what I am recording at 4K 50/60p and at 1080p 50/60/100/120p with the Shinobi?

@edwincipkar3197 2 года назад

Although the Ninja runs hotter than the Shinobi, I just got a Shinobi, do you find that Shinobi still runs hot? Mine heats up pretty good. Thanks!

@PaulJoy 2 года назад

Yes it can still get warm, especially if you have the brightness up high.

@edwincipkar3197 2 года назад

@@PaulJoy Okay thanks! Didn’t know if mine was defective or something. Appreciate the response.

@peterstrachan1794 Год назад

Just in from Atomos 04/03/2023: "As Shinobi is our monitor series of devices, we mainly focused on our monitor-recorders, which is why the Ninja V has this difference with the Shinobi... Regarding the exposure value issue, we would like to clarify that the Shinobi is designed to show the exposure value before the LUT is applied, while the Ninja V is designed to show the true exposure value after a LUT is applied. We understand that you want both screens to match, but the difference is due to the device's design. Nevertheless, your requests have been added to our list of feature requests and will be considered for future implementation. However, we are unable to provide you with a time-frame at the moment.

@PaulJoy Год назад

Thanks for sharing

@peterstrachan1794 Год назад

@@PaulJoy So, with regard to using the Ninja V as a monitor to expose correctly, I'm thinking best to use with a LUT applied. In my case, for broadcast, it would be AC's s709 LUT. And if using two cameras, FX6 & a FX3, use two Ninja's, not a Ninja/Shinobi combo.

@Evapors 9 месяцев назад

Thank you as a film student with a Sony fx6 I want a bigger monitor! I’m in the research phase.

@PaulJoy 8 месяцев назад

No problem, glad it helped

@ketutnermen1273 2 года назад

Does Atomos Shinobi record 10bit?

@PaulJoy 2 года назад

The Shinobi doesn't record at all, you'll need the ninja for that.

@rafael_daguerre Год назад

In summary, Shinobi is better as a monitor, with more tools and quality, but it doesn't record, which is a big difference, because the Ninja V generates recording in ProRes 10bits 422. I had already decided to buy the Ninja V, but seeing this review, I have some doubts. Perhaps the Ninja V+ is a combination of the two. I don't know. My first objective is without a doubt to monitor. Shinobi became the choice after much research within this price range. But after I found out that with Ninja V my Canon M6 MK II records in ProRes 10 Bits via HDMI cable, I decided for it. I got excited. Afterwards, I was a bit put off when I learned that Canon has limited itself to 4K 30fps and 1080p 60fps via HDMI. Hard to understand. In PAL it records at 25fps, which can be an option. In short, if I buy the Ninja V it will most likely be with the idea of using it to record with another camera, because I work at 24fps. And with the M6 MK II use it only as a monitor.

@PaulJoy Год назад

I've not tried the Ninja V+ so I'm not sure about that. If the Canon set the HDMI limit then I guess there's nothing you can do, sorry I do not own that camera so it's hard to help.

@PaulJoy 2 года назад

Thinking of buying one of these monitors? Use my affiliate links and I'll love you forever :) Atomos Ninja V - geni.us/EuxLa | Atomos Shinobi - geni.us/AllxdBw

@PaulJoy 2 года назад

Some great deals on Ninja V at the moment, only $399!... geni.us/EuxLa

@AgentBlackCrow 2 года назад

Does that change things somewhat in Ninjas favour? Or even V+?

@PaulJoy 2 года назад

@@AgentBlackCrow I still don’t think I’d buy the Ninja over the Shinobi unless you actually need the recording capability or might need it in the future.

@AgentBlackCrow 2 года назад

@@PaulJoy thanks Paul, great channel, binge watching today.