Audi A4 Wheel bearing Replacement (B8, B8.5)

Подписаться 8 тыс.

Просмотров 10 тыс.

50% 1

I'm walking through changing my wheel bearing in my 2015 Audi A4 2.0T. I go step by step on how I'm changing out the wheel bearing on this car. If you try this project yourself, there are specialized tools that you wouldn't find in your standard tool set. Look below for links which are the tools needed.
This wheel bearing install is the same for many of Audi's cars, Q5, A4, A5, S4, S5 etc. It is also the same for a B8 / B8.5 and other Audis. I walk through step by how I replaced our wheel bearing while using typical tools. If you don't want to buy a slide hammer, you can always rent one from Autozone or Advanced Auto Parts.
T12 Triple Square (Bearing Bolts): amzn.to/47SXyCo
19mm Allen (Axle Bolt): amzn.to/3RxHCj2
1/2 Breaker Bar (All the bolts): amzn.to/47K051x
Torque Wrench 1/2": amzn.to/3RzgfoA
Torque Wrench 3/8": amzn.to/3Rxm4TF
Magnetic Viewing Film: amzn.to/3Ndl4kT
Slide Hammer: amzn.to/41NCRFA
Don't Forget to Subscribe!
ru-vid.com...
Don't forget to check us out on Instagram: / smackeysgarage
As an Amazon Associate I earn from qualifying purchases
All videos are for entertainment purposes only. Attempt these projects at your own risk! If you do, make sure you follow all manufacturers instructions!

Авто/Мото

Опубликовано:

5 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@timwindsor03 6 месяцев назад

Awesome video brother. Happy New Year. Thanks for sharing. Keep the content coming. Hope you have an incredible weekend. Much love and RESPECT

@SmackeysGarage 6 месяцев назад

Happy new year! Thanks Tim!

@itsthatguydes 2 дня назад

Thank you ive been wondering why mine was making them noises i just changed them bearings and im good

@SmackeysGarage 2 дня назад

Glad to hear it fixed it! How many miles were on your car when they went?

@musclecarmitch908 6 месяцев назад

Great video! Great job!👍

@SmackeysGarage 6 месяцев назад

Thanks Mitch!

@bigmike2149 6 месяцев назад

Great job bro! That is definitely one of the downsides to living in areas that snow. We don’t see much of that here in SF Bay Area. Cheers! 👍🏻

@SmackeysGarage 6 месяцев назад

Very true. Even a small job turns into a big job with corrosion.

@deejay4837 4 месяца назад

Pro-tip, use the pipe from your floor jack as an extension to your breaker bar to tighten down the axle nut the last 180°. You'd be surprised how much it turns and how easy. Makes you also realize that it can be under torqued. I've removed axle nuts by hand cause the person did not torque them down correctly.

@SmackeysGarage 4 месяца назад

Good tip!

@deejay4837 4 месяца назад

Next time leave the hub on - if you're not reusing it and/or it's damaged - and tap each side to walk it out of the spindle. You can away with very lightly tapping the hub, but you have to be extremely careful not to damage the hub as it is the weak point in the suspension and is the cause of mystery vibrations due to run-out/bent hub. IF you cannot get it out with the hub intact get the bearing housing cracked off enough like in the video and use what's called a "demolition driver"....basically a screwdriver that you can bang with hammer or baby sledge. Milwaukee tools sells a good one that you can use to wedge in the little space and increase the gap more and more by chiseling it through the little space that you made with a slide hammer etc. I've done these with a slide hammer only to have them stop midway and the 5 pound slide hammer do nothing for the rest of the way.....

@SmackeysGarage 4 месяца назад

Thanks for sharing these tips. I'm going to pick up a demolition driver. Sounds like a tool that I should have in my toolbox.

@nateweiss7276 5 месяцев назад

Can you do the rear please !

@SmackeysGarage 5 месяцев назад

I will this spring. It’s definitely more work.

@AudiA4-iv2pz Месяц назад

I just did mine last night, the same bolt on the same location had to be cut off

@SmackeysGarage 29 дней назад

Yea. That bolt gets pretty corroded in. You know it’s bad when they make a special fixture to drill it out.

@wtfneisha 3 месяца назад

If i have an Audi a4 and hit a curb and when i drive i hear a kind of humming and rolling sound. Wouldn’t this be my wheel bearing ?

@SmackeysGarage 3 месяца назад

It could be. How hard did you hit it? More likely something got bent.

@raymondferguson1935 Месяц назад

If the bolts at the rear of the bearing loosen take them out half way and use a air chisel to hit them that is a good way to remove a stubborn bearing without damaging anything.

@SmackeysGarage Месяц назад

I did try that with my air chisel. New England corrosion has me beat

@macdaddy1234ism 3 месяца назад

Is this basically the next thing to fix after replacing control arms from pot hole damage ?!

@SmackeysGarage 3 месяца назад

Yep. The bearings take a beating on these cars. Boston here is full of potholes.

@macdaddy1234ism 3 месяца назад

@@SmackeysGarage Damnn ok yup :/ I’m in Seattle :////

@SmackeysGarage 3 месяца назад

@@macdaddy1234ism So you are living the same thing I am!

@macdaddy1234ism 3 месяца назад

@@SmackeysGarage 2019! S4 Seattle So far new rims and new tires Control arms getting put on next Friday .. the problem is still there vibration while turning on the steering wheel and clinking sounds … no shaking steering wheel while going straight though …..

@SmackeysGarage 3 месяца назад

Ah that sucks. I'm assuming they will do an alignment when they get the car done. Ours has taken a beating over the years and has only needed wheel bearings so far. It'll need a full suspension at some point soon due to all the pot holes. Wish I got an S4 though. Must be a fun drive!

@TomPrefontaine 4 месяца назад

How much is the dealer going to cost me for front 2?

@SmackeysGarage 4 месяца назад

I’d expect $1,000 to $1,600 from a dealer.

@Robbysan97 Месяц назад

I was just at dealer and they quoted $400 for parts $660 for labor, so both probably around $2k. Pretty crazy

@SmackeysGarage Месяц назад

Yep. That sounds about right.

@TomPrefontaine Месяц назад

@@Robbysan97 I was quoted 1300 for 1, lol. Did it myself, but the 8.5 has a nut on the top of the control arm that interferes with the 4th triple square if using a hex shaft imo. I had to buy a triple square with rounded(smaller) shaft for better clearance. I had already stripped it though and had to drill it out anyway. Mine was all rusted in place too, so the hammer pull and penetrating oil was needed. I bought the bearing and hub new from FCP.