Aussie Locker Install (Jeep Cherokee Dana 30)

Подписаться 58 тыс.

Просмотров 68 тыс.

50% 1

How to install Aussie lunchbox style locker in a Dana 30 high pinion axle in a Jeep Cherokee XJ.
Check out our website: muddybeards4x4.wixsite.com/my...
Amazon Store: www.amazon.com/shop/muddybear...
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd.com/?ApplyPromo...
Get your OnX Offroad Free trial and use Coupon code “Muddybeards” for 20% off your subscription. subscribe.onxmaps.com/offroad...
Get 10% off your Yes Welder purchase and using coupon code “muddybeards”
yeswelder.com/?ref=dVU5yUQ6
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards4x4” www.olightstore.com/s/8A018Z
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerusa.com/discount/...
Tools I Use, MotivXTools: www.motivxtools.com/
10% off coupon code: muddy
www.setpowerusa.com/discount/...
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@CodyMacRae1 5 лет назад

This channel gives me lots of motivation to work on my xj.. Can't wait for the snow to melt out of my carport so I can install my lift, 35 inch claws and then take it wheelin!

@olamabambi4193 2 года назад

Nice video because you did it like in the real world, showing it as it would be in real life. Great clear explanation.

@GoatOffroad 5 лет назад

Watching this makes me want to do it now on my XJ! I also want a high pinion. But now I can use this video as a guide when I get lockers! Thank you! ❤️🐞

@MuddyBeards4X4 5 лет назад

It's certainly a worth while upgrade

@headlesnorseman701 4 года назад

Doing the axle swap JUST to a HP isn’t worth your time. If your going to get a spare one and get it geared up that’s a different story. The hp/lp ring gear is not the weak link of the d30 lol

@albetog04 5 лет назад

Been happy with Aussie. Running 35s on d30 so far so good! 👍

@MuddyBeards4X4 5 лет назад

Well that encouraging news

@VictorVectorJKU 3 года назад

Great video! I am looking at the Aussie torq locker for my D30 in my JKU since I sheered my spider gears over the weekend and they are just as expensive as the Aussie locker

@MuddyBeards4X4 3 года назад

It has worked great!

@ebalmes 4 года назад

Been watching your videos for a while. Been following Mr. pickle since he started his RU-vid career. When you said “son of a monkeys uncle” I immediately subscribed.

@MuddyBeards4X4 4 года назад

Lol

@GarageBuddys 5 лет назад

Hello Muddy, you have a new member from Italy 💪

@MuddyBeards4X4 5 лет назад

👍

@bennyhill3642 3 года назад

Great job!!!! Thank you!!!!

@zoexj4872 5 лет назад

Nice work, bro. I just did the same locker in my 30 last year for our trip to Moab. Love the locker in front since it's almost invisible in 2wd, and pulls the front up and over obstacles. I'm still rockin stock shafts but upgraded the axle joints to the stronger Spicer 760s. No problems whatsoever. Gotta get a locker for the rear 8.25 next. Happy wheelin.

@MuddyBeards4X4 5 лет назад

That's awesome to hear the 30 is holding up. I cant wait to test this thing out

@dukainmanning7246 Год назад

After 3 years, how is it holding up and how did it do in Moab?

@zoexj4872 Год назад

@@dukainmanning7246 It's held up really well. I drive it about 3 times a week to work on the freeway and do 75 mph no problem. I get the ratcheting only on tight turns, but I can't even feel it in 2wd. Did awesome in Moab. I wanted to lock the front axle since it's easier to live with in 2wd every day. No issues at all. I like the front locker because it helps to pull the rig up and over obstacles while a rear locker would tend to push the rig into the obstacle.

@dukainmanning7246 Год назад

@@zoexj4872 Very nice!!!!

@McCarlSpeed 4 года назад

What's the name of the song as you were putting everything back together? Great video thanks!

@ImDud3man 5 лет назад

Yay XJ Vid! Hoping to to the front locker on mine later this year. GLHF

@AlexeyMagher 4 года назад

Hi MUDDY! Great video, simple and to the point. Have a Q: Is the AUSSIE good only for off road, or it is same good for daily driving?

@MuddyBeards4X4 4 года назад

I have had great luck with it on and off road. As long as you stay on 2wd on the street or barely noticeable.

@hillbillyxjstyle161 5 лет назад

can not wait to get to that point, thank you , hope it works good for you let us know what you think

@MuddyBeards4X4 5 лет назад

Hell ya man. I cant wait to try it out and get an honest opinion.

@TM-ti3md 2 года назад

if the gap between the cam gears is to big or to small how do you adjust that? with shims?

@TossinDirt 2 года назад

Good video. Thanku

@afriendlyjsful 4 года назад

I've been looking at this locker for my ranger fx4 build and after watching your review video and this install video I think I've made up my mind about getting one. I see you dont have lock out hubs either so my concern is the road driveability. I live a good hour from trails or more in some cases so 80% of my driving is on road. How has it affected normal driving if at all? Thanks for the motivation to tackle something I've always worried about screwing up haha

@MuddyBeards4X4 4 года назад

In 2wd in daily conditions you wont notice it. It has held up great for me

@johndecnodder7746 2 года назад

Deff makes it easier to put springs in before pin i just did mine

@dylanreynolds4899 2 года назад

I am trying to install the aussie locker in my 8.25 rear axle and cant find my videos is this the sme process except not taking the carrier out

@DrHavok1 5 лет назад

Grease on the back side will help hold shims next time also

@rogerrichardson4324 4 года назад

Great info buddy

@MuddyBeards4X4 4 года назад

Thanks!

@mmenendez93yj Год назад

Was it not an issue for you to mark where the ring gear was on the carrier?

@gustavoadolfogallegosbravo9489 4 года назад

Thanks. Where I can buy pins ?

@thecherokeechannel688 5 лет назад

Awesome video.

@MuddyBeards4X4 5 лет назад

🤘

@Amarillobymorning777 3 года назад

Those little springs will came out easy??

@cycl0nnus 4 года назад

excellent!!! im new subsciber!!! hows the locker holding? does it add needed grip and power?

@MuddyBeards4X4 4 года назад

It has held up great! Awesome added traction. Locks up and stays locked

@ky0611 2 года назад

Does this locker work with any size gear ratio?

@TheBeardedJeeper 5 лет назад

I love my Aussie locker I have it in the rear of my JK

@MuddyBeards4X4 5 лет назад

They have a great reputation. So far I'm impressed

@noahbartholomew932 3 года назад

It's easier if you put the two sides together before you put them in with the springs already installed

@taylorgriffin7468 5 лет назад

I hear someone is a fan of the Hoodrulic Press Channall. Looking forward to the review vijao.

@jeepguylv80 5 лет назад

hey, how has the locker been working, thinking on doing this myself and wondering how it's been holding up, also what gears are you running, I have 34's with 373 gears, I have a new carrier and was going 410 but have stock axles so I wanted to know how your set up is and how it holds up, thanks.

@MuddyBeards4X4 5 лет назад

So far it has held up surprisingly well. I have 36's and 4.56 gears with stock shafts. I beat on it pretty good last trip and locker works great and so far no broken shafts

@jeepguylv80 5 лет назад

awesome thanks for the input@@MuddyBeards4X4

@robbanks7393 2 года назад

This is for everyone with doubt. Been running an Aussie in my TJ Dana 30 for 10 years. The last 3 years with 37s and chromo shafts. No problems

@MuddyBeards4X4 2 года назад

I never had issues with mine as well

@pmd3211 2 года назад

You can put the locker in with carrier in the jeep, much easier.

@keithlea6804 5 лет назад

Is that a high opinion Dana 30? Could you do a driving video I'm curious about how it is in town . I have a spartan locker in rear. Its noisy on the pavement city driving cant complain off road.

@MuddyBeards4X4 5 лет назад

Yes HP 30. I plan on doing a review video after I get a few trips in. I did drive it yesterday around town a little and I couldn't notice a thing

@brianpardee1281 5 лет назад

Ive been debating going trutrac front and locker rear or vise versa, I have a hp30 and 8.25 planning on 35s with 456 soon. Cant wait to see how this one works for you

@KJsProjects 5 лет назад

I'm leaning towards the trutrac front/ Aussie rear for my ZJ as well. I daily mine and I'm concerned about road manners.

@MuddyBeards4X4 5 лет назад

So far I have just driven it around town a little but I haven't noticed a thing with the aussie up front. Not even a sound

@DrHavok1 5 лет назад

@@MuddyBeards4X4 you haven't heard it doing is ratchet sound?

@MuddyBeards4X4 5 лет назад

I drove it around the street for a bit and didn't notice a thing

@ivanvujadinovic9905 4 года назад

Do you also run a locker in the back? I feel like the back would be more important to be locked...

@MuddyBeards4X4 4 года назад

Absolutely. I run a Detroit in an 8.8 swapped rear axle.

@humbertorobles9638 3 года назад

So is your front differential always locked while in 2wd

@MuddyBeards4X4 3 года назад

No. Only if you are in 4 wheel drive

@evankimbel9306 3 года назад

Wait, you don’t have to worry about backlash or gear pattern when you take it off do you draw a line down the ring and carrier to make sure they both go on right?

@MuddyBeards4X4 3 года назад

Your not changing any of that. Just simply swap the spider gears with the locker. The pinnion depth and shims on the carrier bearings doesn't change

@MacsSpecialitiesMotorsports 2 года назад

Great video. I just did the same setup in my Dana 30 and can’t wait to try it out.

@MuddyBeards4X4 2 года назад

Mine worked awesome. Took a beating and never had an issue

@Slobberdog66 5 лет назад

That hood support looks custom. Pine or oak?

@MuddyBeards4X4 5 лет назад

Doug fir?

@ohsee1346 5 лет назад

Ever have any problems with 36s on a dana 30?

@MuddyBeards4X4 5 лет назад

Not yet. Only been on one wheelin trip since putting in the locker, but been out at least 10 times with the 36's

@MrSrtman18 3 месяца назад

Good thing kelly was there because damn man i cant trust that you did it right. Dropping pins dropping shims.

@alexeimagher9083 3 года назад

Is it possible to drive Jeep on AUSSIEs on highways? Asking because I have D30 front and D44 rear. Was thinking to put Aussies, but insure whether I can drive my jeep daily on it.

@MuddyBeards4X4 3 года назад

I wouldn't be concerned at all running them daily. In the front it doesn't engage unless in 4WD. And the rear may pop and ratchet a bit around corners, but straight line down the highway you should be fine

@alexeimagher9083 3 года назад

@@MuddyBeards4X4 Thanks. Installing the front having the rear D44 should I replace mu LSD gear with the Aussie or it just fine to have original D44 at the rear and AUSSIE at the D30 front?

@ninja63639 5 лет назад

What steering are you using the Tie rod and drag link look huge

@MuddyBeards4X4 5 лет назад

It's a wj knuckle swap. I used the stock wj tie rod ends and used some 120 wall tube. I actually want to rebuild it with some hiems and dom

@NCMTNBOY Год назад

So I am curious how the Dana 30 held up 3 years later with an Aussie locker in the front. Nice video.

@MuddyBeards4X4 Год назад

I am not running the same axle anymore, but as far as I know that setup is still working just great

@realpremier 2 года назад

How do you engage them? Are they like a welded diff?

@MuddyBeards4X4 2 года назад

It does it automatically. The springs help engage them. They will slip and ratchet a bit so not quite the same as welding the diff

@realpremier 2 года назад

@@MuddyBeards4X4 thanx man

@jeepnut779 3 года назад

How well does the Aussie locker work on drive pavement

@MuddyBeards4X4 3 года назад

In the front as long as your in 2 wheel drive you won't notice anything. In 4wd on the pavement it ratches and pops as you go around corners.

@jeepnut779 3 года назад

@@MuddyBeards4X4 cool thank you for letting me know I just ordered up lockers front and rear

@Bananabeachflorida 4 года назад

💪🏻👏🏻👏🏻💪🏻

@MuddyBeards4X4 4 года назад

🤟🏻👊🏻👊🏻🤟🏻

@Axle347 4 года назад

Any updates on how this thing held up? Currently in the garage with my diff torn down lol

@MuddyBeards4X4 4 года назад

Has held up just fine thus far. Have a good 5 or 6 wheeling trips on it and has worked very well

@Axle347 4 года назад

@@MuddyBeards4X4 how is it on the road?

@MuddyBeards4X4 4 года назад

I dont drive mine much on the street but from what I have done it's not noticeable as long as your in 2wd.

@MuddyBeards4X4 4 года назад

My biggest complaint is turning radius. It does lock up a bit if your trying to make tight turns on the trail

@Axle347 4 года назад

@@MuddyBeards4X4 huh ok, good to know. I called the company and they recommended heavier gear oil, I wonder if that could be a factor

@__Chronic_Chris 3 года назад

Can you drive it as a daily w these types of lockers?

@MuddyBeards4X4 3 года назад

Absolutely. In the rear it might be less the desirable, but in the front axle you will not notice it unless it's in 4wd

@__Chronic_Chris 3 года назад

Oh okay cool, i was thinking of putting one on my front axle, thanks!

@humbertorobles9638 3 года назад

So Is your front axle always locked ?

@edgiroux2037 3 года назад

no, it's not. only locks when a certain amt of torque is sensed. it's automatic, and a pretty ingenious invention.

@briang62795 5 лет назад

May be a stupid question but .145 of an inch?

@MuddyBeards4X4 5 лет назад

Is there any other type of measurement? Lol but yes inches.

@aaronstewart7126 5 лет назад

Spartan locker is a little easier to put in. I like that the Spartans springs are recessed and dont have a chance of coming out

@MuddyBeards4X4 5 лет назад

Seems like the consensus is that spartan and aussie are the best lunch box lockers for sure

@DrHavok1 5 лет назад

Whatever works works.....i myself would rather have lunch in the back and air in the front but to each their own

@lucasFritz-hm8ly 9 месяцев назад

@DrHavok1 why... if anything you'd want selectable in the rear and lunch box in the front.. when not driven (2wd) the front locker is invisible..

@billybumpus1 7 месяцев назад

You didn't paint the ring gear and check for the center placement and or check the backlash?? You'll be replacing that diff sooner than you think as it will wear and not operate properly.

@MuddyBeards4X4 7 месяцев назад

You aren't changing any of that. Pinnion isn't even removed. The shims are under the bearings. This is just simply removing the gear set installing locker and reinstall.

@edgiroux2037 3 года назад

Is it noisy with a noticeable clicking sound under normal driving when it's unlocked?

@MuddyBeards4X4 3 года назад

Nope not at all. I do not notice it in the front unless it's in 4wd. In the rear axle from what I have heard it will ratchet and pop a bit when going around corners.

@edgiroux2037 3 года назад

@@MuddyBeards4X4 one more question. You running stock axels and gears on that? What are they?

@MuddyBeards4X4 3 года назад

4.56 gears. Stock dana 30 up front and an 8.8 swap in the rear

@r4yvalencia671 4 месяца назад

We're those 3.17 gears?

@MuddyBeards4X4 4 месяца назад

Nope. 4.56

@bskjonnemand 4 года назад

How much did this locker cost you?

@MuddyBeards4X4 4 года назад

About 250

@alisutherland1103 4 года назад

@@MuddyBeards4X4 That seems awfully cheap. Is there a reason why you chose this style and brand specifically?

@MuddyBeards4X4 4 года назад

Becuase it is cheap..... lunch box lockers are non selectable and pretty basic design. They are affordable becuase of that. However,lots of people use them and I have had no issues with mine. Aussie is actually one of the most expensive lunch box style lockers but have a good reputation.

@alisutherland1103 4 года назад

@@MuddyBeards4X4 Much obliged! I really appreciate the reply. Once I can start working on my Cherokee again, I will go with this one. I am so pumped. Muddy Beards for life lol

@electronicsworkbench 4 года назад

No. No you don't have to remove the carrier. It makes it easier but not required. Have a look at this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uulvxgLoMHg.html