No video :(

AutoCAD Training Exercises for Beginners - 1

Подписаться 551 тыс.

Просмотров 453 тыс.

50% 1

AutoCAD Training Exercises for Beginners - 1. This video contains AutoCAD drawing tutorials based on what we learn in the previous lectures. Topics covered in the video are: Creating first AutoCAD drawing. Solving the AutoCAD basic exercises. This tutorial shows how to create drawing in AutoCAD for beginners.
#CADCAMTutorials #CADCAMAutoCAD #CADTutorials
#AutoCADTutorials #AutoCAD #AutoCADCommands
#autocad_2d_practice_drawing #CADCAM2D #CADCAMAutoCAD2D
#CADCAMCivil #CADCAMMechanical
#CADCAMAutoCAD2014 #AutoCAD2014
AutoCAD drawing tutorial
AutoCAD drawing practice
AutoCAD exercises for beginners
AutoCAD exercises for mechanical engineers
AutoCAD practice drawings
AutoCAD practice drawings for beginners
AutoCAD Training Exercises for Beginners:
• AutoCAD Training Exerc...
AutoCAD 2020 Tutorial for Beginners Complete Playlist:
• AutoCAD Tutorial for B...
AutoCAD Isometric Drawing Tutorials
• AutoCAD Isometric Draw...
AutoCAD 2010 3D House Modeling Tutorial Complete Playlist:
• AutoCAD 3D House Model...
AutoCAD 2014 3D House Modeling Tutorial Complete Playlist:
• AutoCAD 3D House Model...
AutoCAD 2020 3D Tutorial for Beginners:
• AutoCAD 3D Basic Tutor...
AutoCAD 2019 3D Tutorial for Beginners: • AutoCAD 2019 3D Tutori...
AutoCAD 2018 3D Tutorial for Beginners: • AutoCAD 2018 3D Tutori...
AutoCAD 2017 3D Tutorial for Beginners: • AutoCAD 2017 3D Tutori...
AutoCAD 2016 3D Tutorial for Beginners: • AutoCAD 2016 3D Tutori...
AutoCAD 2015 3D Tutorial for Beginners: • AutoCAD 2015 3D Tutori...
AutoCAD 2014 3D Tutorial for Beginners: • AutoCAD 3D Tutorial fo...
AutoCAD Tutorial for Electrical Engineers Beginners Complete Playlist: • AutoCAD Tutorial for B...
AutoCAD Plan Elevation Section Complete Tutorial:
• AutoCAD Floor Plan Tut...
AutoCAD Tutorial for Architecture Students:
• AutoCAD Simple Floor P...
AutoCAD Drawing Tutorial for Beginners:
• AutoCAD Drawing Tutori...
SolidWorks Tutorial for Beginners:
• SolidWorks Tutorial fo...
CATIA V5 Tutorial for Beginners:
• CATIA Tutorials for Be...
Pro Engineer Tutorial for Beginners:
• Pro Engineer Tutorial ...
PTC Creo Tutorial for Beginners:
• Creo Tutorial for Begi...
AutoCAD 2018 Tutorial for Beginners in English:
• AutoCAD 2018 Tutorial ...

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 163

@mevishalagarwal 5 лет назад

Sir, Your tutorials are really good, your method of teaching- one concept and then its tutorial is outstanding. I learned a lot from your tutorials. Thank you very much.

@CADCAMTutorials 5 лет назад

You're welcome

@SerajAhmed 3 года назад

Thank you very much I am learning through RU-vid from your post, it's very help, I did all this exercise as guided in your video, Thanks again.

@manjeetjangra8195 6 лет назад

Dear sir, your tutorials are really informative, thank you, started learning after watching review of this Channel. Would love to continue with you, you saved me 8000/-.......... Thank you!!!

@CADCAMTutorials 6 лет назад

+Manjeet Jangra You are welcome.

@SohilShah_Melodyman 21 день назад

Very helpful! Thanks for sharing! 🙏

@Rahma-z5z 11 дней назад

Thank you so much man I really appreciate your help :)

@CADCAMTutorials 4 дня назад

Glad I could help!

@Cric_-vz9wu 5 лет назад

You make it easy for us. Thanks a lot for your efforts.

@espada9973 5 лет назад

That tangent thing was an absolute power-move, thanks! :D

@hardikvaghela3576 3 года назад

Dear sir i learn a lot about solidworks from your tutorial, your method is simply fantastic...there are also udemy courses that charge money...but your method of teaching is very good..it will be pleasure if you provide me the link for the pdf of the drawing for practice of 2d as well as 3d objects....big thanks...

@Bongbiker 5 лет назад

Thank you very much sir for your tutorial

@CADCAMTutorials 5 лет назад

You're welcome

@abiodunonadeji7549 3 года назад

Thanks a lot. I'm totally new to this! Thanks a lot because I am learning now

@sachinpatel1451 6 лет назад

Why it is required to set the limits? I don't find any difference while drawing within or out of limits. What is its importance?? Please explain. Thanks

@CADCAMTutorials 6 лет назад

Setting limits is helpful for beginners. If you want to learn everything about uses of limit, then watch this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GbfgPGtzFs.html

@mackynista 4 года назад

Your all videos are really informative and im the one your student.ty

@CADCAMTutorials 4 года назад

You're welcome 😊

@mackynista 4 года назад

Sir.what is your tips to me how to grow my channel sir?😊

@CADCAMTutorials 4 года назад

Upload videos regularly and have patience.

@user-gh2qd8kr4h Год назад

Nice tutorial buddy..

@CADCAMTutorials Год назад

Thank you 😊

@darksilvergames5692 4 года назад

thank you sir. i am learning very fast with your tutorials.

@chaitanyareddy5567 4 года назад

Very patiently and beautifully explained sir

@aishwaryakarande1513 5 лет назад

Very helpful videos and briefly explained...

@CADCAMTutorials 5 лет назад

Thank you.

@himanshusen4-yrb.tech.mech306 7 лет назад

Sir ! Which one is better for studying dynamic CAD or static CAD or both ?

@abhijithraveendran9249 2 года назад

Nice class sir! Sir is there any command to choose angle between two line?

@davidorji4224 3 месяца назад

What is the limits we always set before drawing? What does it do?

@alihaider-rq8dl 5 лет назад

I am an Electrical engineer and want to learn AUTO-CAD. I have gone through your channel and i am not sure which one to follow. Please guide me

@CADCAMTutorials 5 лет назад

AutoCAD Tutorial for Beginners Complete: ru-vid.com/group/PLrOFa8sDv6jenZu5e0B9hWY3_ejszg6-g

@andales1979 5 лет назад

this a simple and easy understand tutorial... thanks a lot

@CADCAMTutorials 5 лет назад

You are welcome

@lovewillwinnn 5 лет назад

good teaching! thanks

@fishkeepersclarity4433 Год назад

Thanks

@CADCAMTutorials Год назад

You're welcome 😊

@mohammadsajeed7954 5 лет назад

Thank you so much sir

@Xi_The_Dictator 7 лет назад

Any tutorials for building planning or for anything related to civil engineering?

@CADCAMTutorials 7 лет назад

Visit this playlist for civil engineering videos ru-vid.com/group/PLrOFa8sDv6jd1MTs6yHopVZTujp7AV0i8

@aliabdsyid613 5 лет назад

lot of thanks

@moh4medkhribt 2 года назад

Hi sir, thanks for totorials. how can I get to exrecies in videos as a PDF?

@jeyaseelansuthan3850 4 года назад

Thank u so much

@PravinPatil-wc9rz 7 лет назад

fantastic videos.....

@BobSmith-gh5wj 7 лет назад

Great Video - do you have a link for the PDF?

@airtel1730 7 лет назад

thanks so much sir .........

@akashguttedar5246 6 лет назад

Useful, thank you

@CADCAMTutorials 6 лет назад

+Akash Guttedar You are welcome

@rarthings 4 года назад

Sir, from where you have taken the original models for this video? i want them plz tell me?

@rarthings 4 года назад

By the way your tutorials are too usefull and awesome.

@kakadev674 3 года назад

sir do we have to move in anti clockwise direction always like in example 2 ?

@CADCAMTutorials 3 года назад

Not necessary. You can go clockwise also.

@sagarrebel2903 5 лет назад

Thank you sir

@carbon273 6 лет назад

Why didn't you draw only a fourth of the star and mirror it twice(for the star example)?

@BigBoogookie 5 лет назад

Probably because mirroring wasn't covered in the lesson these practices are based on.

@CADCAMTutorials 5 лет назад

Correct

@biku147 4 года назад

I am unable to make perfect angle,is there any setting problem

@ibrahimhassan4418 4 года назад

when setting limits which units should we use ?

@CADCAMTutorials 4 года назад

@banisinghrawal8815 6 лет назад

PLEASE make videos use ZWCAD software

@lestervai 4 года назад

at the start what is the LIMIT for?

@dixiem2139 6 лет назад

thanks sir !

@vandanaverma6030 5 лет назад

Dear sir is there any short program writing on notepad for CAD Ex. Write on note pad Rotate G Group 50 () Then saved.. .txt Open in command prompt of CAD It starts rotating I forget how to write program n rest of the process.. would u plz help me to do this again

@thebrownmamba7707 6 лет назад

Hi sir I just wanna ask if the limits will defends on the drawing and you're the one who will gonna assume it.

@CADCAMTutorials 6 лет назад

+LS Gaming Limits are decided based on the size of drawing. It should be more than the size.

@thebrownmamba7707 6 лет назад

oh i see thanks sir.

@pratikgaikwad6931 6 лет назад

What is the need to give limits, if one can draw inside or outside of the limits?

@CADCAMTutorials 6 лет назад

+Pratik Gaikwad It is required to reset the screen size. Watch this video for complete information on limits ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GbfgPGtzFs.html

@pratikgaikwad6931 6 лет назад

CAD CAM Tutorials Thanks for clearing my doubt. Enjoying and learning so many things from your videos. Keep up the good work 👍👍

@denbote76 4 года назад

Huge thanks for this!

@animeshkumarchoudhary6324 6 лет назад

Thank you

@CADCAMTutorials 6 лет назад

+Animesh kumar choudhary You are welcome

@sriguruskandha9920 5 лет назад

Hi sir Can I take angle as 130 between the second line and 3rd line(as the angle is between two lines right)for the Star diagram.

@CADCAMTutorials 5 лет назад

All angles are in the multiples of 30 degree. Therefore 130 is not correct.

@barrygregorwirth924 5 лет назад

How to turn on Dynamic Input autofill/autocomplete?

@arindamdhar37 7 лет назад

sir i am using autocad 2007.. I want switch to autocad 2015.. can you provide the link for download in full version

@dishankshah5080 7 лет назад

please make videos on solid works assembly.

@user-gu4tw2uf6s 5 лет назад

Thank youuu

@aryasingh2382 5 лет назад

Sir ...ye Specify upper right corner.......kabhi 100 kabhi150,120 liya jata hh....kisko kis liye use kiya jata hh....pls reply...

@CADCAMTutorials 5 лет назад

Object ke size se jyada lena hai.

@aryasingh2382 5 лет назад

@@CADCAMTutorials thanks..sir....

@jayprakashraj9929 6 лет назад

Solid work ke tutorial bhi banao sir please

@CADCAMTutorials 6 лет назад

+jayprakash raj Here are the SolidWorks Tutorial for Beginners: ru-vid.com/group/PLrOFa8sDv6jcp8E3ayUFZ4iNI8uuPjXHe

@irtazarivzi7447 5 лет назад

does the limits have to be always 0.0 and 100.100 ?

@CADCAMTutorials 5 лет назад

No, it depend on the size of the drawing.

@mithunmahato309 7 лет назад

what are the units ? metres or mili meters ? what will be the effect on units if the drawing is imported to ANSYS ? plz help

@CADCAMTutorials 7 лет назад

Unit is mm. I don't know about ANSYS.

@abdiganiise8499 7 лет назад

CAD CAM Tutorials Can I use cad 2016 and follow the tutorials of cad 2014

@CADCAMTutorials 7 лет назад

+Abdigani Jibe Yes

@cadilluminator419 6 лет назад

IF you chose mm as your limits in the drawing in Autocad then it will be same as the your limits in ANSYS, as in ANSYS u got the option to chose your units separately even if you are importing the drawing from autocad format into ANSYS. My suggestion is to select the same units in both the softwares to ignore the complexity if happened due to unit's differentiation

@cadilluminator419 6 лет назад

i mean units, wherever i had mention the term "limits"

@khalidjan7096 5 лет назад

NICE Lecture, But I want to ask a question that, when I create any drawing like House map, but in printing, some items like Door or windows are not appears. Why, plz teel me Sir.

@CADCAMTutorials 5 лет назад

Your layer may be non printable.

@wasiflone7435 6 лет назад

Sir,r u using inch unit or meterers

@CADCAMTutorials 6 лет назад

@abhishekbarot4306 3 года назад

Sir tangent vala mere nahi aa raha. To last drawing main tangent kese draw karu???

@CADCAMTutorials 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-u__cH9JkDbs.html

@dipakkr.mishra755 5 лет назад

Sir can I perform this step in 2007 or 2014 version of autocad

@CADCAMTutorials 5 лет назад

You can do it in both versions

@omerwahed 6 лет назад

Which software is this,Looking for Architecture version.Thanks

@CADCAMTutorials 6 лет назад

+CERTIFIED CONSTRUCTION Plain AutoCAD

@uddhavgodase5555 5 лет назад

There is small gap between tangent line and circle, why this so in this last tutorial

@CADCAMTutorials 5 лет назад

Type re enter

@alberiton8966 5 лет назад

So if i draw the half part of the second ex and mirror it is it okay too

@CADCAMTutorials 5 лет назад

Yes

@CADCAMTutorials 5 лет назад

Infact, if you are planning to use mirror then half is also not required. You can mirror the quadrant portion twice and object will be ready.

@alberiton8966 5 лет назад

Thanks 🙏 😊

@shahmasiddiqui1076 6 лет назад

what is the purpose of specifying limits?

@CADCAMTutorials 6 лет назад

Please watch this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4GbfgPGtzFs.html for more details on limits command.

@RahulJagtap14 6 лет назад

Please give link for exercise pdf.

@BobSmith-gh5wj 7 лет назад

In drawing units what is your setting for Direction Control - my 60 degree angle is not as steep as your example

@CADCAMTutorials 7 лет назад

It is may be difference in monitor? I have seen that it happens.

@mehulpanchal5454 6 месяцев назад

Pdf kaha per hai

@user-pf6jw1ny6k 7 лет назад

please upload exercises

@SyedAbbuHassan 6 лет назад

what if I dont set any limits?

@SyedAbbuHassan 6 лет назад

Yeah, I got it. If we dont set limits, the drawing is going out of the screen. Thank you sir.

@PavanKumar-ih3xd 6 лет назад

Why there is a green line

@CADCAMTutorials 6 лет назад

+pavan kumarnaidu Red and green line indicates axis drawn from 0,0 coordinate

@johntyler7680 3 года назад

How to close the drawing in autocad 2017?

@CADCAMTutorials 3 года назад

Close enter

@johntyler7680 3 года назад

I tried to type 'close' but there's no such command..

@CADCAMTutorials 3 года назад

Click on application menu available at upper left corner [Big red A] and click on close

@wasiflone7435 6 лет назад

Sir,we did not set unit?i winder how to set unit?

@CADCAMTutorials 6 лет назад

Give UN enter

@paulesqueda2478 7 лет назад

how do you know what to type in the "limits" command

@cadilluminator419 6 лет назад

For example, if you want to draw a square of 10 by 5 (of any length unit), than you need to feed the limits more than the maximum value of the drawing i.e. more than 10 and feed the limits in the tab which asks for upper right corner as your limits and 0,0 in the first tab in limits command which asks for the value of lower left corner.

@viva9303 7 лет назад

It's not showing me the quadrant...Pls reply

@CADCAMTutorials 7 лет назад

+VI VA Shift + right click & select quadrant from the menu

@shahidphotostate1505 5 лет назад

unit sir konsa use kia hy

@CADCAMTutorials 5 лет назад

Decimal, mm

@sriguruskandha9920 5 лет назад

Angles concept not understood sir

@CADCAMTutorials 5 лет назад

You can watch following tutorials to understand angle concept in detail ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ojuz0rzt67M.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-It2jXzsXrVw.html