Automatic transfer switch setup for home DIY solar systems (You wont believe the outcome)

Подписаться 38 тыс.

Просмотров 86 тыс.

50% 1

Let us take a look at an Automatic transfer switch that performs. Its alwy very good price tag.
-- More information and links below! --
Im impressed! This device was alot better than I thought.
I will follow up this video with how you can set which one of the inputs will be main input.
Buying from below links give me some help towards the channel meanwhile it doesnt cost you anything
Ebay Geya Automatic Transfer switches:
ebay.to/36I41jz
Aliexpress Jott4
AUtomatic Transfer switches
s.click.aliexpress.com/e/oQTUiAWy
Aliexpress Geya
s.click.aliexpress.com/e/lcJ9wMzS
-------------------------------
Do you want to support my channel? Below links cost you nothing to use:
Complete list of recommended stuff: diytechandrepairs.nu/complete-...
Ebay: goo.gl/PwRR68
Amazon: goo.gl/VSU4YH
Amazon store www.amazon.com/shop/influence...
Banggood goo.gl/fcCjJ5
Gearbest: goo.gl/tay4J6
Patreon and Paypal:
/ diytech
paypal@romer.se / www.paypal.me/diytechandrepairs
Become a Patreon?
/ bqxpyp
Manage your youtube videos like I do? Use below
www.tubebuddy.com/DiyTechandr...
---------------------------------------
Links to my site and current solar layout:
diytechandrepairs.nu/current-s...
/ diytechandrepairs
www.diypowerwalls.com/t-Espery...
Steemit if you want to read more!
steemit.com/@diytechandrepair
DIY powerwall forum: goo.gl/Hfr529
--------------------------------------------------------------

Хобби

Опубликовано:

14 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 157

@marykowalewski6639 Месяц назад

Thanks Mr. Swedish Man. I'm connecting mine up backwards as I want My solar input system as primary. Thank you Good Job. Gus

@jimmcgettigan4826 3 года назад

Great information since I just bought one to install.

@LegendLength Год назад

Lovely analysis sir

@paulvanderveen1986 Год назад

Great video!

@raulsantinolopezrodriguez8349 2 года назад

Thanks so much for this video

@HBPowerwall 4 года назад

Great video buddy, thankyou

@SoyTermiNestor 4 года назад

48 Amps system has been working with one of this 100 amp rated 3 poles 220 for over 8 months now, cycling between sources everyday without flaws, no sing of overheating or hot spots or anything of that matter. Computers only reset sometimes going from A to B, but stay on form B to A.

@josephrosa5845 2 года назад

A UPS (Uninterruptible Power Supplie) will solve your computer problem

@tarakivu8861 2 года назад

@@josephrosa5845 Or simply a faster Transfer Switch

@UmarFarooq-jn7dt Год назад

How is it holding up? Any update. I'm about to put my load of about 40 Amps with this kind of switch.

@jimthvac100 2 месяца назад

@@tarakivu8861 Don't you think a UPS would be much less expensive than buying and replacing the transfer switch?

@azmatjamil1154 3 года назад

Dear can you explain the difference b/w ats switch used for normal and solar invertor. As if you see you found for solar they offer diffetent but technical specification is same. And also My concern is that is this switch can harm for load like fridge etc. Thanks

@johnaugsburger6192 3 года назад

Thanks

@deepblue7457 3 года назад

Not sure you can use it for inductive load, where in-rush current may exists. The current can be hundreds time larger than normal.

@muhammadsadiq8131 2 года назад

Could you please tell me how i can use the no nc c option in this to auto off the generator when the grid (main power) comes.

@molinarenterprise 2 года назад

help please do this item only use a 220 only input into the power controller? because I live in us when I use 120 the switch does not work when I turn off primary please let me know. if you can help me.

@joetbbq 7 месяцев назад

curious, how do you connect 3awg wires to this terminals for 100amp usage...? thank you!!

@user-el8yx7eh3h 10 месяцев назад

do you have those wires connected to 2 seperate wall sockets where one is on and the other is off?? or how does it work?

@bregzstuna9075 5 месяцев назад

Can these be hookup with out the on/off switch.want to hookup direct for inverter & generator

@marktheamerican4162 4 года назад

I would love to see how to do the primary

@UmarFarooq-jn7dt Год назад

Updated review since the video is 3 years old. How much load are you using on this device. Thanks

@webber123456789 11 месяцев назад

Is there any model that is certified and that can be recommended? From Hager or Schneider or ABB?

@HonestTechReviews Год назад

Please can you link the manual transfer switch? (The one you say you use)

@lawreekaranja380 Год назад

Can I use this to switch between phases?

@greenmenpt 4 года назад

i have sma sunny island 8.0 with nissan leaf batteries and when grid goes down these looks to be the solution, anyone know how to make the install ?

@robertzeman4301 4 года назад

Do you think you could add one of those big AC capacitors to deal with the switching time 30ms? I dont know how they are called its used for air conditioners or motors I think.

@DIYTechRepairs 4 года назад

Wont help here om afraid

@paytufo Год назад

Any model from schneider or any good brand?

@shalashaskasaiz 3 года назад

I wanted to install this kind of automatic switch to my entire house, but after seeing this explanation i prefer a manual, thanks a lot for your advice about this cheap device. Can you please recommend a manual certified switch for 220v ( 1 neutral and 2 fase of 110v each = 3 wires in total from the pole outside) Thanks.

@josephrosa5845 2 года назад

you need to get a nema 3 manual transfer switch rated at the amperage you are switching from/to most are expensive and large electrical supply house sels them. it all depends what you want to keep alive when power loss.

@hasger1941 Год назад

Did not understand will it only work 50 times ?

@jeffreyabrown1972 2 года назад

Thanks for this video. Can you please say if the control voltage is 120 or 240 (AR and AN)?

@DIYTechRepairs 2 года назад

Its 240.

@rekawek6 2 года назад

Great video. Do you check switching time on the same phase? I think it will be great to check switching time on different phases to see time switching in configuration with UPS or off-grid PV inverter.

@2012SUSE Год назад

@Piotr Rękawek : I receive one yesterday and open it today. Please carefull ! ! ! The power contacts do not switch at the same time - both sides ! ! ! So it is possible for some ms is power on zero line / the equipment. This is dangerous.

@rekawek6 Год назад

@@2012SUSE Thank You for Your answer I decided to use manual switch with neutral.

@GTRDRIVER1 Год назад

@@2012SUSE Hi - thats allso one of my biggest worries about this units - that for example 2 phases are connected and no zero line ... im searching for a good automatic Transfer Swich since a long time ...

@UmarFarooq-jn7dt Год назад

@@GTRDRIVER1 Did you find one?

@GTRDRIVER1 Год назад

@@UmarFarooq-jn7dt no only junk

@CharlesGwinn-ep9pb 21 день назад

Ive been saving to buy the digital version(MOES) with much shorter delay time than this mechanical one.Will Prowse has vids. demonstrating running computers and (I believe) even a window AC. Rated for 100k switches!...but this mechanical one ....IDK.

@DIYTechRepairs 21 день назад

I run it with computers. It's 10ms switch time that is good enough. We need mechanical here to get it approved.

@walterrostangarciajr 2 года назад

Thank you for making this video! Do you know any ats that will not shutdown a computer?

@DIYTechRepairs 2 года назад

Its not the ats that is the issue. The problem is what you have on the inputs. Are the both inputs synced or not as example.

@walterrostangarciajr 2 года назад

@@DIYTechRepairs sorry im new to this electronic but what do you mean by unput being synced? Input like solar panel and grid supplying power to the inverter? Im using a deye hybrid inverter but when i turn the grid off, the inverter is not able to switch fast enough. The computer loses power.

@DIYTechRepairs 2 года назад

@@walterrostangarciajr you need a different inverter or you can add an Ups for the computer.

@lysol7204 4 года назад

What would be good one thats certified for the US? I cant seem to find ANY! Just very large ones.

@DIYTechRepairs 4 года назад

Not from us so cant tell :(

@KBKMusic 4 года назад

So it's no chance to set "B" source as primary for full automatic? always "A" source is primary when I have to use full automatic switch betwen A and B, because when I connect my control wires only on the B side source "A" no switching, when "B" source gone, right?

@Ulbre 6 месяцев назад

Of course you can, it's purely how you wire it.......if you wire grid as A then grid will be your primary. If you wire grid as B and solar/wind/gen as A then the latter will be your primary.

@efanutz Год назад

they say is used for generator backup, but also you need extra controller for diesel generator , to know the state of the generator and to control the warm up delay switching time and also the cool down timer for generator after grid on. what you can say? cand you do un diy project for diesel generator?

@DIYTechRepairs Год назад

Don't have any

@CelsiusAray Год назад

Work whit 110v?

@sebydocky5080 2 года назад

I got the 8ms version... It's true no micro-cut for computers, etc.... but ... versus time, the mechanical part will fai (misalignement of the two rotating metal contactors).... In average, it works one year for two transfert / day in average.... :(...

@UmarFarooq-jn7dt Год назад

This was helpful. Thanks

@MichaelBurgess3200 3 месяца назад

30ms would not shut down a computer. The PSU discharge isn't THAT low. It takes around 1-2s to completely discharge the PSU of a computer. It would indeed work for like a switch between solar, and grid power. Love the video though and very informative, thank you!

@walters2023 2 месяца назад

Hi have a house with, 3Phase, Sungrow SH10RT 10kW Hybrid inverter and 16kW Sungrow SBR160 High Voltage Battery Modules , would this ATS works for my house battery system or, this is for the small solar caravan system? Thank you

@DIYTechRepairs 2 месяца назад

It's a 3phase 63a ats

@walters2023 2 месяца назад

❤ Thank you so much, it's perfect for me then.

@kfjduredhvcjgyfrhfnf 3 месяца назад

one thing i'm worried about. neutral breaker should connect first and disconnect last. if not, your house neutral will float short period and overvoltage in some phase(s) vs. floating neutral may happen.

@DIYTechRepairs 3 месяца назад

Can't be done with a 10ms ats. The breakers also only break the hot lead. That is what you have the rcd for. It will break neutral if the current doesnt add up

@Dj2006 Год назад

Hello, im thinking of buying this but im gonna have a pure sine wave inverter hooked up to the backup power input and normal home power hooked up to grid input and i will have 500w load do you think my computer will turn off when the transfer switch changes from grid power to generator power?

@DIYTechRepairs Год назад

It will work fine. I do it like that.

@Dj2006 Год назад

@@DIYTechRepairs Okay thanks buddy

@michalknapek5697 22 дня назад

One thing is not clear for me. I have already setup circuit with breakers and everything. How I can switch those for different output eg solar power when both of them are active at the same time?

@DIYTechRepairs 22 дня назад

you cant have both inputs active at same time to same output unless they are made for it. An ATS switches source to the output and is often connected befre for instance a breaker panel feeding it

@eherlitz Год назад

Har kikat en del på denna också men är lite osäker på kvaliteten, finns det någon godkänd du skulle kunna rekommendera?

@DIYTechRepairs Год назад

Schneider har ett par. Men ja ovan är kanske inte svensk standard. Jag har kört med min i ett par år och än så länge funkar den.

@DiyintheGhetto Год назад

Is it possible to attach a remote switch to cut over from A to B? What I mean is it this is in your garage and you want to switch it manually from A to B into your living room Can you attach a manual switch with a wire to it?

@DIYTechRepairs Год назад

You Will need to rewire it to do That. It does not have It per default but It is possible

@firstbigbarney 3 года назад

Can a ATS like this he made to switch from one service to a second service? I have two services and I want the lower price service to be used in certain hours (off peak) and the higher price in other hours (on peak).If not what kind of a switch would I need to automatically switch during certain hours.

@josephrosa5845 2 года назад

ats switches when primary power fails (no power ) then secondary power kicks in and when primary returns switches back

@firstbigbarney 2 года назад

@@josephrosa5845 If using a transfer switch with control lines for each power source couldn't you interrupt line A and the power line B with power maybe with a short delay. In this control circuit you could have timer for when each circuit is active . The relays in the ATS would only allow one power supply to be on at a time. Maybe I do not understand how this works and would appreciate any help any one could provide. I am trying to power devices for a certain time on 2 different electric power services to be able to take advantage of the lower off peak rates on 1 of the services. The ATS would be mechanical device to prevent both services to be connected at the same time. Joseph are you in the US?

@nyameamah 2 года назад

@@firstbigbarney Can we understand you, you have two sources supply, A & B. You want to switch between A & B based on the time of the day? Perhaps, 00:00-12:00 on line A 12:00-23:59 on line B Or you rather want to switch based on the supply voltage value? Like, When Line A peak voltage is less than ## Switch to Line B. Please clarify.

@firstbigbarney 2 года назад

@@nyameamah That's exactly what I want to do I want to switch from one meter to another meter which is an off-peak meter at certain times to buy power to charge my electric car. Can I interrupt the service from circuit A with a relay and a timer to be able to engage circuit B ? I thought this was a good solution because you have a mechanical interlock contacts on inside of the ATS and you also have a high amperage availability on these units. If you interrupt the control for circuit A and make it make it look open and it'll switch to the circuit B with a delay would this be possible? After the timing interval on circuit B it would open the control circuit and close the A circuit enabling the original A power source again with a delay for safety. This would happen daily according to the schedule for your off-peak power currently ours is 2300 hours to 0700 hours all 7 days. Thank you for your reply. BigBarney

@MrSeth166 Год назад

@@firstbigbarney Did you find out how to fix the problem with your power changing?

@diy-powerwall2729 3 года назад

Hello I have a problem and I need your help. This ATS has a switching time over 10ms. Everything under 10ms is ok, from 10ms I have the problem that certain devices can be destroyed. Therefore, I would like to switch a switchover delay using a relay. How do I turn on the relay on your device? Do you have a schematic

@DIYTechRepairs 3 года назад

You cant get it to switch much faster to be honest Most switches are 10-20ms delay. IF you need faster put an online Ups in between or buy a more expensive switch. What is it that cant tollerate 10ms?

@diy-powerwall2729 3 года назад

@@DIYTechRepairs missunderstanding? i won´t faster, i want a delay relais to protect the devices. How can i turn on a delay relay on this device?

@DIYTechRepairs 3 года назад

@@diy-powerwall2729 ahh sorry :) you cant with above unless you open it Up and modify it. Its better to get contactors with interlock that you yourself build the Logic around. Look at My earlier videos :)

@josephrosa5845 2 года назад

you want longer delay just add a timer.

@GTRDRIVER1 Год назад

Hello - i want to ask you if you have installed this Transfer Switch and if its still working fine ? - the Video is now 3 Years old so perhaps you have new Information about this switch ... - My biggest worries about this switch are the Svrew Terminals they look very cheap ....did you use ring terminals for the Wires ?

@DIYTechRepairs Год назад

I run it still without issues. No I use standard cables

@GTRDRIVER1 Год назад

@@DIYTechRepairs Hello - Thanks for tast reply - Thanks for fast reply -- im also a little worry about the switching time and the possibility that the Neutral Line is not connected at the same time then the ofter Phases - 2 Phases and no Neutral Line is a very bad thing for all the Electronics ... - But first of all - Thanks for fast answer and have a nice day !

@MrLarryl79 Год назад

@DIY Tech & Repairs Add one more thought with this one, if only S or T phase fall out, then you sucked, because never will switch over, since only observing R phase.

@DIYTechRepairs Год назад

Correct

@franckmarcelin7573 2 года назад

Hello dear , thanks for your video .. sorry for my bad english... i whant to buy one to use with my genset... but for me this switch can’t work because the backup power source is off during some minute during the time for the engine to start... when the grid powwer is off without any power .. how is the switch positione? Or maybe the position of the auxiliary contact... Thanks for your help...

@DIYTechRepairs 2 года назад

Not sure i understand. It wont switch unless Power exist.:)

@franckmarcelin7573 2 года назад

@@DIYTechRepairs do you hace try to conect only the main power , without backup power, and try to turn off the main power? What is the switch reaction??

@franckmarcelin7573 2 года назад

@@DIYTechRepairs thanks for your reply 😉

@josephrosa5845 2 года назад

thats what no/nc /c connections are for

@franckmarcelin7573 2 года назад

@@josephrosa5845 hello , i have recieved the product... yes your right about no nc contact.. some other ats work with build backup supply

@aldob2282 Год назад

you can ignore the pictures and use it the way around

@Stisse12 4 года назад

Get an UPS for your computers that are sensitive

@DIYTechRepairs 4 года назад

You need an online Ups. The cheap ones generally below 2000va also uses mechanical switches that can cause same behaviour as above. Dont forget that :)

@appletree5597 4 года назад

Hi, I have the exact same model. and I have one issue with this. For the backup power connected to a 2000w modified sine wave inverter. When the main grid power goes off, The ATS has to transfer for the inverter power. but instead, I can hear a relay buzzing sound from the ATS. tries to switch to backup power but it doesn't and make buzzing sound continuously. I check inverter It can handle 800w grinder. How much amp ATS relay using ? is there any solution for this.

@irvirv231 3 года назад

I tested it use 1.9amp to change from a to b 120v

@lavectech 3 года назад

Did you resolve your issue or get a different ATS? I am wanting to use a Projecta PW350 inverter as the main input as I have solar power which is rather use but automatically switch to mains power if the battery gets low and turns off. Thanks.

@hexlhieA 3 года назад

probably because it's a different wave form so the ats doesn't like it and doesn't switch completely.

@victorhugostosius5245 2 года назад

Hello Apple Tree, I have the same issue, how you can solve it? Thank you very much!

@appletree5597 2 года назад

@@victorhugostosius5245 I replace with with 4 pole relay. I have low load. Bt u can use 2no 2nc contactors.

@otchereisaac7414 3 года назад

Pls, does this device have the gen-set remote switch capability?

@DIYTechRepairs 3 года назад

@josephrosa5845 2 года назад

thats what no/nc /c connections are for

@phizicks 4 года назад

don't use tape, unplug the mains and work offline. also heatshrink tubing I prefer more than tape around a screwdriver

@DIYTechRepairs 4 года назад

Of course you unplugg as amateur :) heatshrink is Good advice

@mrfixit100 Год назад

Always use electricians fully insulated screwdrivers

@phizicks Год назад

@@mrfixit100 the already made ones yeah, just don't use bare metal ones at least.

@jmonsted 4 года назад

Is the "primary is primary" problem all that bad? Just wire up what you want to be primary on that side.

@DIYTechRepairs 4 года назад

Sometimes you want to change it. Example i Winter i run grid as primary and during Summer solar :)

@matsv201 3 года назад

Where i live sometimes the power flickers on and off several times before it get fully on. It would be nice to just pull a swich and have it wait. Or even better, a automatic timer giving it 5 minutes or something before swiching over.

@jmonsted 3 года назад

@@matsv201 Some smarter ATSs have configuration options for that.

@matsv201 3 года назад

@@jmonsted That is true, but the genearly cost a bit more. I´m really not that cheap, but some of them tend to be a bit to expensive for home use. I really just need it for a few computers and some other stuff, most of the lighting is already DC.

@matsv201 3 года назад

@@jmonsted I just saw a indian guy, simply putting a cheap relay timer between, that was really a very clean and simple solution

@brianipsen1285 Год назад

On some of the aliexpress pages is noted: "NOTE: The rated voltage of the common and backup power supply must in range 85%-110%, and the current cannot be less than 5A, otherwise the coil will heat up or even spontaneously burn. If your city voltage not stable, please kindly add voltage protectors in system." ... So one would have to run at least 5A through the device ? Sounds a bit odd ..

@DIYTechRepairs Год назад

They add what they can to protect their products that is badly designed i guess :) To have a minimum current is just like saying you cant drive your car below 100mph because then it will blow up. :D

@Passco666 Год назад

I think because it dont have any logic circuit with microchip and its just analog think.. The higher voltage will overload the circuit inside and burn the coil, components and low power can disable the function of coil and then it will not work at all.. So if you live in modern country where they keep the voltage same all the time you are good..

@JaakJacobus Год назад

Jotta is a bit cheaper but Geya has a CE certification. I checked their MCB's: Jotta has only CCC for China. Geya has CE for Europe. In case of fire, your insurance can refuse to pay and get away with it if your equipment don't have CE. There is cheap and too cheap.

@user-tj5nk7lb8l 4 месяца назад

You dont mention operating voltage IMHO given the contact separation ca 30mm? its good enough for up to 24Vdc 100 A but I wouldnt trsut on a 48V system, much bigger gap, or a proper magnetic arc quenching shute like real industrial breakers from Siemens - Google the internal construction and see why. Otherwise make sure you have cable cutters nearby when the arc doesnt quench. Plenty of YT vids to show what can happen

@DIYTechRepairs 4 месяца назад

Why dc load? They are built for switching ac load.

@guillermoreyes9637 4 года назад

Reproducir en español

@andrekhoury6252 2 года назад

interesting but ithere is no off position if no power on AR AN and Br BN i want to out over and under voltage relay on both source A and source B but even if source A voltage is low the load will jave the voltage unless i put a contactor on source b and source A so this way no power comes in and to load unless voltage is good

@DIYTechRepairs 2 года назад

Its just an ats Its either or :) for what you search for i would build a custom cabinet with ats and then contactors.

@andrekhoury6252 2 года назад

@@DIYTechRepairs i know but lets say source A was off no source b so it wont change and suddebly source A back again ur load will have power no matter what over uner voltage relay u put in series from source A phase to AR unless it switch tonsource B even no power source

@andrekhoury6252 2 года назад

@@DIYTechRepairs it wont switch to B cos there is no power on B yet generator still off :)

@DIYTechRepairs 2 года назад

@@andrekhoury6252 i dont understand? It Will priotize a and IF a doesnt have input it go to b IF it have. Its a solar system ats. You can Always add lvdc in front of THE sources.

@andrekhoury6252 2 года назад

donu recommend it for 65 amp and to get the 125 version since on aliexpress all same price

@SynthToshi 22 дня назад

what would one use for a server solar setup no battery?

@DIYTechRepairs 21 день назад

Grid? You need either grid or battery. Can't use solar only since the sun goes down or behind clouds.

@SynthToshi 21 день назад

@@DIYTechRepairs trying to do a grid with solar switch, just cant have a delay.

@DIYTechRepairs 21 день назад

@@SynthToshi no you do grid tie where the appliance use the grid and then the solar sell back to grid. As said you can't or more should not run on only solar because solar need a backbone lite battery or grid

@SynthToshi 21 день назад

@@DIYTechRepairs so what solution are there for a switch for servers.

@DIYTechRepairs 21 день назад

@@SynthToshi any ats or powers powerswitch. Like from apc

@muhammadhumayoun8815 Год назад

There is no 0 zero position To off both the grid and solar

@ursodermatt8809 4 года назад

i wouldn't go above 10A

@SoyTermiNestor 4 года назад

48 amps system tested and approved for well over 8 months and no sign of over heating yet. Switches over between loads every day.

@lesteraidancastillo5218 2 года назад

Try with load

@iwontlagback7236 Год назад

@@DIYTechRepairs Well does it work or does it not ??

@DIYTechRepairs Год назад

@@iwontlagback7236 the device itself works. I'm running it

@SayWhaaaaaaaaaaaaaaaaaaaaaaat Год назад

AUDIO WAS GONE ON MOST IMPORTANT PARTS AND YOU DONT EVEN ADDED SUBS :(

@DIYTechRepairs Год назад

What parts?

@korishan 4 года назад

🐏🐑🐏🐑🐏🐑🐏 The more sheep, the better 😜

@MrJorgecg 4 года назад

If you really want to get your system or your house up in fumes, go for it. I'd advise you not to use it✌

@DIYTechRepairs 4 года назад

Please tell whats not Good about it. Because i doubt it just starts to blow Up without issues :) i would Love to have more input from People actually used it

@MrJorgecg 4 года назад

@@DIYTechRepairs take a look inside it and you'll see how frail it is. Also if it locks in between changes I'll heat up so fast that if you not around you could have serious problems.

@lysol7204 4 года назад

@@MrJorgecg why?

@DIYTechRepairs 4 года назад

@@MrJorgecg I did have it apart. Feel free to point out the design flaws that you see. Also compare what you think is a flaw towards how an ABB or Schenider version is built

@SoyTermiNestor 4 года назад