AutoMeter Wideband Air/Fuel Tuning (and a Monster Burnout)

Подписаться 8 тыс.

Просмотров 146 тыс.

50% 1

Dyno Tuning with an Auto Meter Wideband Air/Fuel Gauge. Our Lightning needed a kick in the pants, and the boys at Anderson Ford Motorsports were happy to oblige. Check out the monster burnout at the end! For more info, hit us up at / autometerproductsinc

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@BoostedOne1320 8 лет назад

This video is misleading; should have left the ignition advance out of the picture and shown how little affect the learner mixture has on power..

@nachtmensch_v2 14 лет назад

Nice work guys!

@davidbailey1721 2 года назад

Was the burnout cut from the final edit?

@deceptinator 13 лет назад

I'm actually curious about how well it stood in place making white smoke before the tuning.

@dvdgmz 10 лет назад

How about a video on why we need the wideband meter and not just explain how a lean mixture produces more power. Or can anyone explain to me how this gauge would be a good addition to my cluster. Why do I need to monitor the mixture?

@crettybocker 10 лет назад

how about how lean melts everything in your motor smart .

@tdawg719 11 лет назад

I understand how a richer mix is safer, as the extra non burnt fuel acts a a cooler for the engine. Protecting from detonation. I don't see how the running leaner would add more power. Won't the engine still combust all the fuel it can anyways if the mixer is rich? Where is the extra power coming from? I understand the danger of running lean but I dont see how it adds more power. Better combustion over all? IE the extra fuel actually prevents some of the stoich mixer from burning?

@tedisbig1 11 лет назад

Tell me why you would try make a performance car with a crapy ute platform other than better fuel economy?

@mpietro3000 13 лет назад

Is this truck stock before you tune it? 10.5 seems to be too rich for a theses days.

@Vintageguy73 9 лет назад

All that just to do burn-outs? How bout before/after time slips?

@hrgp13 11 лет назад

i install the wideband (7374) but how I know that works good?

@KujGaming 11 лет назад

@tdawg719 rich is safe and cool, lean is powerful but dangerous and hot. When i was into nitro rc cars it was the same principle

@hrgp13 11 лет назад

how can i lower the bridgeness???, they are to shiny

@dogeminer 9 лет назад

I have 2 major issues with this marketing video. Firstly, I find it hard to believe that a factory tune on a vehicle of this vintage would have AFR bottom out a wideband (

@skirkland1980 12 лет назад

what is E02?

@sokkaisbest 13 лет назад

wait what ?? so lean mixture gives ya more power???

@cuzz63 3 года назад

until you burn a hole in the pistons

@Standard_MT 11 лет назад

if a lower number is richer, why do afr gauges the higher numbers marked "rich"???

@cuzz63 3 года назад

some are marked using lambda .

@BansheeZR1 10 лет назад

What was the torque improvement?

@BansheeZR1 10 лет назад

***** So you don't know?

@Tinytacohead 11 лет назад

That's not the best comparison, considering nitro RC's don't have a separate oil system & thus directly get more or less oil depending on how rich or lean they're tuned. PS - don't reply to this from a phone/tablet etc, if you want me to actually see the message, lol (they don't work right with RU-vid's comment/notification system)

@Roadghost88 11 лет назад

"Let's see how she runs"...a burnout? C'mon, show us some track numbers.

@phaedrus0420 11 лет назад

????

@SIRICKO 11 лет назад

after all that then do a damn burn out what a fail of a video.

@AkedaLvl999 2 года назад

This video is so full of misinformation that Autometer should be ashamed.

@BulletBlazerSS 11 лет назад

this guys voice is ridiculous...

@dvdgmz 10 лет назад

@TheBrownGarage 10 лет назад

i have a good answer, one of the pipe tread plugs in my aem fuel pressure regulator wasnt torqued all the way and started leaking ever so slightly, when i first installed it and set the pressure level it wasnt leaking, i was drivin hard and i noticed the engine was runnin a bit different and that my AFR was goin over 14 nearly 15 sometimes on wide open throttle. when i first set it it was to 46 psi at 800 rpm idle, i checked and it was down to 37 psi at idle, tightened plug and fuel pressure came back up. if it runs too lean you lean out your engine and boom. all that said if you have a stock engine on stock ecu theres no need, the stock o2 sensor should do its job just fine, and if it does go wrong you should get a check engine light for it. im runnin a built engine on aftermarket ecu and it had lean protection but i didnt have it set up yet, after that incident i set up the lean protection lol