Related video : • Tukang las harus tahu ...
Flow of pumping system oil : • Simple Oil Flow System...
Pumping system : • Simple Oil Flow System...
Using used oil from a car engine. Sorry, I cannot publish the design yet because it is bound by the agreement with the customer.
How it works : Before the oil enters the venturi it is heated through a small pipe which is above the burner, to make it more liquid. Liquid oil is broken down into smaller particles by the swift flow of air from the Electric Supercharger Turbo. The design of the burner is made in such a way that it can convert oil particles into steam so it can burn easily. The design of the burner on the inside also functions to heat and mix air and oil vapor to be more homogeneous to produce a good fire. The design of the burner on the inside also functions to slow down the swift mixture of air and oil vapor, so that the fire does not escape from the tip of the burner and the oil can burn all without remaining smoke.
The fuel tank is pressured only to push oil, this oil flow system might be able to use a pump, one day I will try it.
This is a waste oil burner. I need a very fast air jet and a large discharge so the fire or temperature is high enough
So I use a blower that has a high speed.
I'm trying to make a waste oil burner that doesn't use a siphon nozzle to break oil into fog.
Or pumping liquids with high pressure through a very small nozzle hole to make it mist.
Waste oil is very dirty, if through a very small nozzle hole will easily clogged.
In this waste oil burner, I use a fairly large nozzle hole, with a hole diameter of around 2-3mm.
After the oil is slightly broken down by a very fast air flow, the oil evaporation process is perfected in the burner after it is hot.
1 ноя 2019
