Babbit vs insert bearings in Ford Model A engine

Подписаться 50 тыс.

Просмотров 55 тыс.

50% 1

What is the difference between "babbit" and "inserts"? Today, Willie Baechler from Baechler Machine Shop in San Andreas, California tells us. Willie also discusses the pros and cons of each.
If you don't want your Model A to break down, just subscribe! ru-vid.com...
"I AM THE WARRANTY" shirts & merch!- model-a-merch.creator-spring....
How to buy a Ford Model A- • Ford Model A Buyer's G...
What motor oil to use in a Model A- • What motor oil is best...
How to shift the Ford Model A transmission- • How to shift gears in ...
How to check and change fluids in Model A- • How to check and chang...
How to lubricate a Model A- • How to lubricate a For...
How to do Model A front end alignment- • How to align Ford Mode...
How to set the timing in a Model A- • How to set Ford Model ...
How to properly adjust Model A brakes- • How to adjust Ford Mod...
Ford Model A daily driver- • Daily Driving a 92 yea...
Why the Ford Model A is the best American car ever made- • They call it the "Best...
www.PaulShinn.us
"I AM the Warranty"
#paulshinn

Авто/Мото

Опубликовано:

17 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 176

@quailstudios Год назад

0:00 Intro 0:39 Willie Baechler 11:38 rods 13:00 balancing rods 16:42 crush 18:35 babbit longevity 19:53 insert bearing longevity 20:18 oil changes 21:23 where to get inserts 22:17 engines 24:14 end

@madman-pv9qd Год назад

Sounds great in theory but... last $4000. insert bearing model A engine we had kept pitching the thrust bearings into the pan. What a hassel, no more of that. Babbit always worked fine for me even well over the 100,000 mile mark.

@ModelA Год назад

Cool! I wish I had your luck

@pipefitter1728 Год назад

“Shows you how much I know about Model T’s!” What!?!? You’re married to one!!

@ModelA Год назад

Yes, but I know even less about women!

@patrickoxford-baker7224 Год назад

@@ModelA you know enough to convince a good women to love you. How did she get her cool nickname???

@DrTheRich Год назад

@@patrickoxford-baker7224 i quite sure now you don't convince women to love you, they either already do or never will..

@patrickoxford-baker7224 Год назад

@@DrTheRich Bless your heart 👍

@ModelA Год назад

@patrickoxford-baker7224 Anyone who hangs around my shop ends up with a nickname eventually

@mandolinman2006 Год назад

I love your machinist guy. Knowledgeable and hilarious. I loved the reaction when he saw the engines in the back of your truck.

@ModelA Год назад

He's a hoot!

@russpeck1320 Год назад

Guys like Willy are a real treasure! And I really appreciate your sense of humor about what you don't know, Paul... it's refreshing to see a guy like you who knows so much, but still is willing to be humble and learn!

@ModelA Год назад

I'm just a regular guy, flaws an all.

@FilamentFriday Год назад

He’s a funny guy and really knows his stuff. Great video.

@MrMillertime289 Год назад

Thank you for taking time to educate us along the journey of antique car ownership. It is always interesting and I am so glad that companies are making upgrades. The knowledge of rebuilding babbitt bearings is a rare thing these days. Have a good day and I look forward to the next informational session.

@ModelA Год назад

Glad you enjoyed it!

@paulhamer1374 Год назад

Another great video with Willie. I am in the middle of converting my 1929 to insert bearings and WIllie was very kind to take the time to talk to me and my friend about how to properly set up for the line boring. Love to meet you both some day.

@ModelA Год назад

Drop by the shop during business hours, or come to a Model A event and say HI!

@Kybossls Год назад

Paul, another great video this morning. Thanks to Willie for his time and sharing his knowledge. My 400A is showing 68,K miles on it, I’ll be dropping the pan and looking inside. I do not want to experience your disaster. Still on the brakes at the moment.

@ModelA Год назад

I hope yours is doing better than all of mine.

@charlesdalton985 Год назад

Outstanding content and presentation. I’ve gotten the answer to the Babbitt/insert question that has long hounded me. Gentlemen - thank you both! ~ Chuck

@ModelA Год назад

Awesome! Thank you!

@fredkaminski3668 Год назад

Had my Victoria rebuilt by Antique Engine Rebuilder when it was located in Skokie,IL. Rich retired and sold the company to on outfit in Bluffton, IN.

@ModelA Год назад

Good to know. Thanks!!

@AstraWerke Год назад

Great bit of insight - also nice to have someone finally giving an answer to what lasts how long. I also heard that the hardening and fatigue process increases the thicker the babbitt layer is (i.e. the more undersize your crank is ground). The thicker babbitt acts more like a spring, thus moving about much more and getting brittle much quicker.

@ModelA Год назад

That is true

@kenkeeley5667 Год назад

@ModelA Год назад

Hey Adrian, if you can figure out how to get that block to Willie's shop, I'd pay half the rebuild cost.

@AstraWerke Год назад

@@ModelA Wow, what a kind offer! I still hope to get the situation back under control, but should I not be able to, I'll definately keep your offer in mind.

@karenkress8775 Год назад

Thanks for another great video. My model A blew a piston last year. Someone installed the center ring upside down. Luckily no damage to the cylinder walls. Notice the babbit bearings had pits in them like you were talking about. Should I change them the car runs fine. Have put about a 1000 miles on it since replacing all the pistons. The oil pan was nice and clean and sent it out to be cleaned just in case. Thanks again

@keithstudly6071 Год назад

Insert bearings are steel with copper plate and sometimes silver plate and babbit last. The copper and silver conduct heat away from the babbit and keep it cool so it won't be deformed. The thickness of plain babbit bearing leads to them heating and the babbit getting soft and failing.

@quailstudios Год назад

Excellent video. Insert bearings all the way! Some of this video was a little over my head but if I study it enough then I usually get it after a while. :)

@ModelA Год назад

Thanks Hal! The problem is, Willie is trying to dumb it down for me.

@Go4Corvette Год назад

Thanks again for a great video. Have fun with those engines, Mike

@ModelA Год назад

Thanks, Mike,

@ZacknDad Год назад

Just a quick stop to say hi and hope all is well my friend! Looks like all is well. Keep up the great work you do week in and week out. Have a wonderful weekend Paul and have a blessed Sunday. God is good! God bless!

@ModelA Год назад

God bless you, brother Craig!!

@timnewman1172 Год назад

Henry had no idea these cars would be running nearly a century later, but he built them to last in the days of poor oil, poor fuel, and poor maintenance... In other words, "Built Ford Tough" wasn't just a slogan!

@ModelA Год назад

True dat!

@kimberlyhooker9840 6 месяцев назад

now that's a great video!! Thanks!! I remember my Father telling me about the Heartbreak of finding Babbit in your oil pan

@ModelA 6 месяцев назад

It's a feeling I hope you never experience. I have, and it makes you feel like you got kicked in the giblets.

@Dan-qy1rg Год назад

Good info there Paul. Now I know what a babbit bearing is and looks like, always used inserts. You gotta know your stuff when it comes to doing the engine rebuilds or it could be a disaster. Thanks have a great weekend.

@ModelA Год назад

Thanks Dan! I switched to all inserts too.

@mattpowers3958 Год назад

Excellent video, Paul. I learned a lot as I always do from you! Keep up the good work!

@ModelA Год назад

Thank you Matt!

@andrewbarratt Год назад

😮prostate

@andrewbarratt Год назад

Prostate sickness

@andrewbarratt Год назад

Want information on Prostate

@steveduecker9872 Год назад

That was very interesting, thanks!

@mattomon1045 Год назад

great teaching Paul

@ModelA Год назад

Thanks Matt!

@mattomon1045 Год назад

@@ModelA Paul you are welcom. rember we are all teachers and students at at all times!

@matthewmahalic3562 Год назад

Way to go Paul very informatibeth loved it want to see more thank you!

@ModelA Год назад

Thanks, will do!

@carlyleporter5388 8 месяцев назад

Fantastic Model T knowledge.

@Wooley689 Год назад

Very interesting Indepth information. I believe Babbit bearings are still used in ships.

@ModelA Год назад

I think so too!

@stuartrose9456 11 месяцев назад

Babbit is widely used not only in ships , turbines, mills all heavy industry, oil is the important factor for longevity, oils today a way better than days gone by,

@michaellauer3397 3 месяца назад

Very informative. Well done.

@ModelA 3 месяца назад

Glad it was helpful!

@brianwinters4991 Год назад

Great video , I'm also am a fan of the insert conversion .

@ModelA Год назад

Right on

@56Spookdog Год назад

It’s getting difficult to find a place to get engine work done in the SF Bay Area. Good information and video.

@ModelA Год назад

Willie isn't too far away

@Louis-kk3to Год назад

That man takes care of his words and how he speaks ,I like him

@JesusTorres-qr1gz 11 месяцев назад

Wow Paul you and this gentleman talking about the engine specifications , connecting rods balancing, main caps and block clearance with the bearing in place made me fill like if was on training again, felt so happy and satisfied with all that technical information, outstanding Paul, that was so neat, congratulations, you bring that information so interesting,wanting to see more, most kind of you for sharing it with us, from the endless summer paradise Puerto Rico Jesus Torres.

@ModelA 11 месяцев назад

That's Willie. He is so knowledgeable! Thank you, my brother.

@JesusTorres-qr1gz 11 месяцев назад

@@ModelA you guys are great, at my 71 years of age I still get my hands dirty from time to time, but when I was young in my area were very few of those model A Fords, then I spent 30 years working for Cummins Metropower in Newark NJ, mainly on troubleshooting and research and development, I wish to have the opportunity to see those toys in person, perhaps one of these days I would look it up and get close to a place similar to you guys, blessings to you and your love ones, mi agradecimiento Paul, to you and Willie, from the endless summer paradise Puerto Rico Jesus Torres.

@dwilliams8365 Год назад

With aircraft engines we cut open the oil filter ( if you have one ) and examine it for metal. Could also take a sample of oil when changing

@ModelA Год назад

Oh yes! I forgot to mention. I used to be a pilot and did my own maintenance.

@cheeseheadfiddle Год назад

Very informative. I always thought there was lead in babbet Educate me! Thanks.

@ModelA Год назад

Mostly tin

@dennisyoung4631 5 месяцев назад

There is a species of (cheaper) lead-based “Babbitt”. It is said to be less good (for engines) than the tin-based kind.

@patrickoxford-baker7224 Год назад

A few rolling shots of any of your As (Gandalf) up around a Alpine lake, your introduction followed by a invitation to join the you over on the channel for the full video and of course the great music you use would make a very enticing short.

@ModelA Год назад

RU-vid keeps pushing creators to make "shorts". I am still trying to figure it out. Technology is my kryptonite! hahaa

@jeffrose133 Год назад

As always, love the videos. I may have missed this, but what exactly needs to be done to go to inserts? Do they have to machine the block and cap to accept the locating tab? Thanks

@ModelA Год назад

Maxhine the block and caps. No biggie.

@georgejohnson1498 Год назад

So educational, even if I'll never have a Model A. I would love one though! Love your videos. Of the more modern engines, my favourites are the B18 and B20 Volvos, and in my dream the similar era straight six 3 litre types. I love the idea in those that the cam shaft is gear driven rather than chain or belt driven. Best wishes from George

@ModelA Год назад

Thank you George!

@georgejohnson1498 Год назад

@@ModelA Dear Paul, What I love about rugged and actually well engineered older style engines, is that though it requires an expert to work on them properly, for crank-work and so on, the concepts of design can be understood by anyone who can fix a Briggs and Stratton [side-valve] lawn mower engine. To my mind the modern computer regulated engines with variable valve timing and direct acting overhead cams are completely beyond even competent home working. I have set tappets on a Volvo B20 in a 1971 Volvo 145. All you needed was the right sized spanner, a screw driver, a set of feeler gauges, and ability to add up to nine! Same with old coil and points ignitions. Easy without a degree in computers! Best wishes from George

@ModelA Год назад

You're right!!

@dennishutchinson Год назад

Loved this! Very informative. A video on different bearing failure modes would be interesting along with what a normal bearing would look like after say 70 to 100K miles should look like. 👍👍👍👍😊. Just a thought.

@AstraWerke Год назад

This one's pretty good. Not specifically Model A, but I reckon 1950s at least ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NDuZ2Uigq5Q.html

@ModelA Год назад

I don't know who could make such a video.

@johnhpalmer6098 Год назад

@@ModelA If you can, find photos on the internet of a model A or T with babbit bearings and one from a regular bearing needing to be rebuilt and compare the differences, and look at the car community on YT for guys that do rebuilds, also check out Coldwarmotors and Strong's garage for videos of Scott's model T and other old cars being rebuilt, including his work on repairing the 1937 Chevy coupe he bought and Matt Strong of Strong's garage and his employee Jim from Coldwarmotors fame as they work on cars from the 1900's to say, the 1950's in a vintage garage where they replicate old ways of doing stuff, including a machine to redo baabbit bearings for research.

@Spritsailor Год назад

I know a guy who put in roller bearings and his HP increased markedly.

@lab4746 Год назад

Thank you for this discussion. Babbitt bearings have poor tolerance to impact loads, as you discovered at 68000 miles. The thin layer on the insert greatly improves the tolerance. Engineering manager Pioneer Motor[car] Bearing.

@ModelA Год назад

Good info. Thank you!

@williamforbes5826 Год назад

Well, I certainly learned some things today! The fact that babbitt bearings work harden is new to me, but makes perfect sense. Thanks, swami Paul! Looks like I will be fore warned and fore armed concerning babbitt bearings! Yeah, I like things to Last! Oh, any updates planned on the Burtz Block? Or did I miss it? And thanks again for the efforts to edumacate us rubes!

@ModelA Год назад

You're welcome, Forbes! Tim down at Hanford Machine took over the Burtz blocks and finished them. One is in his car, the other in a customer's car.

@davegerold4154 Год назад

Hi Paul, Just a heads-up on the insert main bearings you are showing. They are made available by Antique Engine Rebuilding (AER) who contracts with a manufacturer for their production. The bearings you and Willie show are actually bearing grade aluminum adhered to steel shells. They do not have any Babbitt on the surface. When AER first brought the bearing shells to market, the first couple production runs of bearings had Babbitt as the final surface. It has been at least 12 - 13 years since the Babbitt surfaced bearing inserts were available. Good video. Thanks Dave @ Durable Performance, Minnesota

@ModelA Год назад

Ahha!! Thank you so much for the correction!

@scortia22 Год назад

Wow. Yea I'd say insert is good insurance of a long lasting motor. Seems like babbitt is like running on borrowed time. Plus for how much an engine rebuild is it's a safe and long lasting decision. I'd rather see that all day than a hot rodded A. Ugh when I see that I feel like Henry Ford is spinning like a rotisserie chicken in his grave. Again awesome video paul.

@deangiacopassi1951 Год назад

I didn't know you flew indoor free flight. Hope to see you at Johnson City this year

@ModelA Год назад

Yessir!! I tried A-6 but cannot break 4 minutes, so went back to clear film.

@mackfisher4487 Год назад

7:07 "Shows you what I know about model-T's." Paul it's obvious that you know and love Tina very well.

@ModelA Год назад

Hahaa! Yes, but I still have no clue how women work.

@victormanuelhenriquezciste4198 Год назад

Beautiful

@victormanuelhenriquezciste4198 Год назад

Por favor activar subtitulos en español a vuestros videos, somos muchos seguidores de habla hispana. Saludos cordiales desde Chile.

@johnmcmechan5744 Год назад

My Model A has 62000 miles on her (original) Should I remove the engine and drive to California to have the bearings done by your friend or do you know of someone who could do them as well as he does in the eastern part of the country I live north of Toronto Canada? I’m in Florida for the winter and next one when I could bring the engine down with me Appreciate and suggestions PS replaced the timing gear and cleaned oil pump strainer doesn’t have external oil filter Going to put one on when I get back home this year

@craigroberts3982 Год назад

Thank you. So, an indoor freeflight guy too?? What don't you do?? Spent a few years casting bullets and it sure does look a lot like the bearings in a Model A. Mine is leaking a lot from the rear main and I'm afraid will need some work soon. Insert bearings seem to be the way to go so my kids don't have to rebuild it in their lifetime when I'm gone and they are the caretakers.

@ModelA Год назад

I cast bullets all the time. Been reloading for decades.

@craigroberts3982 Год назад

@@ModelA I knew you were my kind of people.

@ModelA Год назад

God fearing, flag waiving American!

@rscruiser3533 Год назад

Thanks Paul for taking us to Baechler's -- I wish we could get Adrian's block to them ( Astra-Werke ) He's having a real hard time finding a Machine Shop to do his block -- to inserts ---- Learned a few things today -- I use to help our Welder when ever a babbit job would need to be done -- this would be for machinery not on cars -- same principal --- Hope Adrian will find a shop to do his block -- babbit to inserts -- One big thing you said today -- But needs more info on --- LOCATION AND WHAT THIS DIAMOND looks like -- is if one needs another block --- Look for this Diamond? ------ Thank You for Sharing ----- Rodney

@ModelA Год назад

I ever thought of doing a video on diamond blocks. You think that would be interesting enough for a whole video? Maybe I should?

@dickdaley9059 Год назад

Someone, somewhere must have an engine ready to install for Adrian to get him back in his A!

@ModelA Год назад

@@dickdaley9059 If his car was sitting in my shop right now, it would have a rebuilt engine n it before lunchtime.

@oldfordsgarage Год назад

The middle of 1936 is when Ford started using insert berings.

@ModelA Год назад

Good info. Thank you!

@bobmills8341 4 месяца назад

Another wonderful video for a newbie Model A guy! THANK YOU!!! I do have a question on your video showing top material replacement - what kind of material do you use, is it a vinyl available at fabric stores? I do snowmobile seat covers and use the Artic minus 40 rated stuff for that.

@ModelA 4 месяца назад

Hi Bob. Thank YOU! Yes, that is a vinyl material, and it has a specific grain to it to match the material Model As had when new. Most of the Model A parts places sell it.

@bobmills8341 4 месяца назад

If a person is converting from babbit mains and rods to shells, do you file a place in the bearing seat for the tang? I have seen the tangs on the bearing shells for my 52 Pontiac flathead and assume it is a similar type of tang?

@ModelA 4 месяца назад

Yes

@pablo4015 Год назад

Muy bueno,pero favor pueden activar la opción subtitulos, traducción,en mi caso soy argentino y somos muchos los que tenemos modelos A & T, gracias

@flintknappingtools 7 месяцев назад

Im about to become an owner of a Model A that has been in the family for decades…how would i find a qualified machine shop in western PA that would have the knowledge to do the insert bearings on such a motor? Thanks for any help!!!

@alexenns3203 Год назад

When is your video on shocks coming out? I need to rebuild my. Thanks

@ModelA Год назад

Still in production. Sorry! Weather has been beating us up.

@alexenns3203 Год назад

@@ModelA awesome can't wait!

@tubbytommy 5 месяцев назад

Thank you for sharing. I recently bought a 1927 Essex super six with a rather noisy knocking sound. I need contact info for a shop that will pour babbit or modify for insert bearings. I'm in New Mexico.

@ModelA 5 месяцев назад

don't know of any shops in NM. But people send stuff to Willie from other states all the time. Email him at baechlermachine at hotkail.com

@victoriahortus Год назад

good to see the Radio Engineering Truck

@ModelA Год назад

It seems to be the one constant in my life.

@brwpe7733 Год назад

Paul, I was offended “again” by Willies comments regarding your engine components after they were unloaded. The nerve of this man!!!! 😉 24:37 Thanks for another nice video and keep them coming!!

@ModelA Год назад

Hahaa! Willie is always joking with me. Known this man for decades.

@brwpe7733 Год назад

Just in case you didn’t know I was joking, I was joking but don’t tell Willie. 😉

@ModelA Год назад

I took it as joking. I don't think Willie takes anything too seriously

@robinimpey101 Год назад

A video just for Adrian! 🙂

@ModelA Год назад

Ha! Well, this was recorded and edited and scheduled way before he published his. Just a coincidence.

@patrickseals5746 Год назад

I have been trying to get a straight answer on the babit or bearing question for a while now. Im interested in having this machine shop rebuild my engine. Can I get a website or phone by chance?

@ModelA Год назад

He asked me not to publish his phone number. Search his shop in Google and it should pop right up

@scottfoldenauer3638 Год назад

Good program. Curious, a while back you mentioned that you bought the new model a block but you said that additional work was necessary. Can you tell me what you had to do?

@ModelA Год назад

I gave them back and they had a shop who is now specializing in those motors finish them.

@scottfoldenauer3638 Год назад

@@ModelA wow. So what do you think? Sounds a bit dicey.

@ModelA Год назад

I don't think so. Someone with more experience than me would be just fine putting those together.

@scottfoldenauer3638 Год назад

That's good to hear. Can you tell me what needed to be done? I appreciate your input. Thank you.

@ModelA Год назад

The guy with the machine shop put it all over Facebook, you can follow his journey there. I just wasn't the guy.

@youtube-handle-are-a-joke 2 месяца назад

I'm building my first A engine, I'm contemplating the idea of inserts main, I've been looking up but couldn't find anywhere if when using inserts you still need to use the caps shims or not? Does anybody knows?

@mr_paw_t Год назад

good info! I learned something new. Now, nap time! :P

@ModelA Год назад

How was your nap?

@mr_paw_t Год назад

@@ModelAfantastic. I hope you and Tina are doing well.

@brianleduc2244 Месяц назад

I will be have a engine rebbited what iam wondering is when it's poured I see some that pinning the babbit then boreing it,,,is that better or just have it poured then bored?

@ModelA Месяц назад

Pinned babbit is normal.

@robertsimpson7113 7 месяцев назад

What is involved in adding engine oil filtration??

@ModelA 7 месяцев назад

Buy the kit, bolt it on. Done.

@guohaojie-wb4hi Год назад

cool

@PeopleAlreadyDidThis 9 месяцев назад

In addition to Babbitt beating out from impact loads, the thick layer of bearing material isn’t great at conducting heat into the block. Babbitt was fine for low-speed engines, but as RPM ranges (and power) increased, Babbitt bearings were more likely to “burn out.” Steel-backed precision inserts conduct heat out of the journal far better because the Babbitt layer is so thin. They also stand a better chance of operating with full-film lubrication because of their precision, unlike hand scraped or fitted poured Babbitt. That also reduces heat buildup. I recall my dad, born in 1921 and in the automotive business all his life, talking about engines being utterly worn out at 20,000 miles.

@ModelA 9 месяцев назад

What would you guess is the cruising RPM and redline RPM of a Ford Model A?

@thegoober8797 Год назад

😂Thumbnail looks like you two was passing the "peace pipe".

@skategeezer1810 Год назад

What will be the cost to switch to inserts. How much will the machining cost be? Adrian seems to be in a jam. Maybe a go fund me account could help get him a block to get him back on the road.

@ModelA Год назад

I will let you know.

@MrJeep75 5 месяцев назад

How do the inserts stay in

@ModelA 5 месяцев назад

They "crush" in to the seats and caps. That's why tolerances are critical.

@MrJeep75 5 месяцев назад

Anybody does this anymore in Oregon

@ModelA 5 месяцев назад

I only know of Ron's Machine Shop doing it in Ohio. ronsmachineshop.com/Home.html

@melba7084 Год назад

Diosacuba

@magoo262 Год назад

What could you expect to pay to swap out from all Babbitt to inserts?

@ModelA Год назад

Few hundred

@oldarkie3880 Год назад

Great. I have 2 questions.1) How does an oil filter work if the engine has no oil pump ? (splash oiling) 2) Is that later version of the engine not pressure oiling with oil pump (model C engine)? Please make a video on that subject, The model C engine with pressure oiling.

@ModelA Год назад

Model A motors have an oil pump.

@dennisyoung4631 5 месяцев назад

Full-flow filtering routes all of the oil through the filter, but some pass but *part* of the oil, so called bypass filtration…

@craigweis6576 Год назад

Opening line... A little chuckle ... the "Model 'A' motor " ... motors are electric. Engines are internal combustion [except steam locomotives] ... so "Model 'A' engine". Side Bar: R/C model airplane engines, like the 0.90 cuin Rossi's were ABC Aluminum-Brass-Chrome good for 14,000+ rpm at almost one horsepower. Chrome made it hard and wear resistant. Piston so tight in the bore it almost can't be turned over by hand until broke in. Work hardened and splattered at 68,000 miles ... like work hardened rail road tracks? Add another 10 ton to each car on a 100 car coal train and the rails will fracture and cause a derailment.

@ModelA Год назад

motor mō′tər noun Something, such as a machine or an engine. A device that converts any form of energy into mechanical energy, especially an internal-combustion engine or an arrangement of coils and magnets that converts electric current into mechanical power. Rossi didn't do ABC motors. They did ABN. Aluminum piston in a Nickel plated Brass sleeve. I am a Rossi motor nerd.

@jamessoares516 Год назад

I guess I’m going insert lol

@maxbray9124 4 месяца назад

Inserts are steel backed Babbitt bearings, you can’t get away from Babbitt, no replacement, why would you even want to?

@ModelA 4 месяца назад

Because 1/4" thick soft babbit fails way too easily. Inserts have the steel shell for strength.

@MrJeep75 5 месяцев назад

Who poor babbitt anymore

@ModelA 5 месяцев назад

Very few in the US.

@thebanjoman1963 Год назад

uh..uh...uh.... Somebody needs a script.

@patrickoxford-baker7224 Год назад

With A script you don't get to hear a really neat guy access stored information from what sounds like a brilliant mind.

@ModelA Год назад

He isn't a polished TV personality, he's a brilliant machinist with decades of experience building Model A engines.

@HKlink Год назад

You should definitely edit out the uhms and ahhs of your expert guest. This is just painful to watch. I'd much rather have it a bit choppy as you fudge together the sentences than have each sentence be three times as long as he thinks about what word to use. This is just hard to watch and feels wildly unprepared. I have no doubt that he knows what he is talking about, but all the pauses make it seem like he's just making this up on the spot.

@patrickoxford-baker7224 Год назад

You can get information from Google, you need to listen to people to gain the knowledge of experience. Instant gratification is not always what it's cracked up to be. This man obviously knows what he is talking about.

@ModelA Год назад

@HKlink Willie is fighting cancer and has a little speech lag from the treatments. He is my long-time friend and I am proud of him and his work ethic, even when he doesn't feel up to being on camera!