Backup saving parameters on a Fanuc 0-TC control, Miyano CNC Lathe, CNC Digital, Inc.

Подписаться 846

Просмотров 18 тыс.

50% 1

Backup or saving parameters on a Fanuc 0-TC control.
Download to your PC.
Fanuc Parameters 2.0=1 which equals two stop bits.
and Parameter 552 = 10 = 4800 baud rate
These two parameters must match what is in your PC software for file transfer.
Miyano CNC Lathe,
CNC Digital, Inc. 440-721-7100
www.cncdigital.com

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@KaraokeNha-l2p 24 дня назад

Thank you for your share the video. Can you share with me the parameters? Because I accidentally deleted the parameter of the machine. I appreciate your help.

@romanadeleon7938 2 года назад

What is the name of that software? Where can I get it from?

@chrishopkins7620 3 года назад

Thank you for the very informational video! Do you have the procedure for loading the parameters back into the machine? One of our machines has had the Delete+Reset command done to it and im starting fresh. I was hoping I could copy the parameters from my identical machine and load them into my wiped one.

@cncdigitalCNCMachines 3 года назад

I do not have a video. However. INPUT OF SETTING PARAMETERS PROCEDURE PRESS DGNOS/PARAM KEY (SETTING PARAMETERS INPUT) (MAKE SURE SETTING PAGE 1 ARE CORRECT) ISO=1 I/O=0 E-STOP PRESSED IN PWE=1 MEMORY PROTECT KEY OFF (TO THE RIGHT / ) MODE SWITCH = EDIT ENTER 900 OPTION PARAMETERS BY HAND CYCLE POWER TO ACCEPT OPTION PARAMETERS E-STOP OUT PRESS INPUT LSK SIGNAL FLASHES (LOWER RIGHT SCREEN) SEND DATA FROM PC. INPUT SIGNAL FLASHES (DATA BEING ACCEPTED) INPUT PC DIAGNOSTIC PARAMETERS, TIMERS, COUNTERS. PRESS DGNOS / PARAM KEY TWICE. (MAKE SURE YOU ARE IN DIAGOSTIC SCREEN) (MAKE SURE SETTING PARAMETER PAGE 1) ISO=1 I/O=0 MEMORY PROTECT KEY OFF (TO THE RIGHT / ) MODE SWITCH = EDIT PREPARE CONTROL TO RECEIVE DATA (WAITING) PRESS INPUT LSK SIGNAL FLASHES (LOWER RIGHT SCREEN) SEND DATA FROM PC. INPUT SIGNAL FLASHES (DATA BEING ACCEPTED)

@chrishopkins7620 3 года назад

@@cncdigitalCNCMachines Thank you for your reply! I had actually figured it out on my own but I know that this will be helpful for many others.

@schrottmail6381 Год назад

@@chrishopkins7620 Do you have a backup? We had the same problem with the reset but no backup

@ayyazonline 3 года назад

Hey! Why didn't you press EOB when downloading the diagnostics? And what was that you explained at the end about parameter no.1 and 502 and 503. Can you please explain it into simple words. I will be very grateful.

@jonnydeen6952 2 года назад

The bit at the end was regarding the serial communication settings. This should be established before transferring files as you need both the control and pc to have matching settings. These include the baud rate, data bit length, stop bit length. Hardware handshake etc. If your coms settings work and you can transfer files via rs232 then you can ignore those settings as they are fine.