BAD Car Karma! Botched Job Recovery! Jeep Wrangler 3.6 Pentastar

Подписаться 572 тыс.

Просмотров 132 тыс.

50% 1

Take care of your engine's oiling system with premium synthetic Amsoil Engine Oil!
Do you perform your own maintenance? Get premium synthetic Amsoil gear lube and oils HERE! ************************ www.amsoil.com/?zo=30606222 *************************
Damaged Lower Intake! Plastic Threads! Jeep Wrangler 3.6 Pentastar Pt 2 • Damaged Lower Intake! ...
Today we have a Jeep Wrangler Sahara with the 3.6 Pentastar engine. The customer states engine oil is leaking and it is a large leak. Be placed the jeep in service mode and began the inspection. It was found that engine oil was leaking off of the valve covers, after lifting the jeep, we found more oil on the back side of the engine and on the transmission. The intake manifold was removed and then the lower intake manifold was removed. Engine oil was found pooling up in the valley between the cylinder heads. The oil cooler assembly was then removed and inspected for leak sources. The o rings were found to be deformed and leaking engine oil.
Check out our Website/Merch HERE: www.RainmanRaysRepairs.com Look for links to our other channels, appointment and contact info, and our new merch lineup with custom T's fitted hats and MORE!
Wife Unit unveils our custom tumblers and mugs • New Custom Insulated T... also found at www.RainmanRaysRepairs.com
Videos on the A/C System Replacement HERE!
Part 1! About to EXPLODE! Pistons Coming Apart Pontiac Firebird! • Metal in the Freon? Pi...
Part 2! Compressor Damage took out the whole System | Pontiac Firebird Camaro S-10 Buick • Compressor Damage took...
Support the Channel with a Like and Subscribe!
Become a Channel Member or visit Patreon at / rainmanraysrepairs
Visit our Second Channel on RU-vid, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter (X): @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Located in Florida? Need work done? Visit www.RainmanRaysRepairs.com
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers at www.RainmanRaysRepairs.com
Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
Astro Tools 78450 HD Harmonic Crank Pulley Puller - GM LS, Ford Coyote, GMC, Chrysler, Dodge & Jeep, Black amzn.to/3STBrX9
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
#mechanic #repair #autorepair #restoration #wifeunit #brakecleanmafia
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
ABOUT OUR CHANNEL
Our channel is about general automotive repair and maintenance . We cover a large variety of automotive services and repairs in a privately owned independent shop.
Check out our channel here:
/ @rainmanraysrepairs
and the Off Duty Channel here: RainmanRay Off Duty / rainmanrayoutoftheshop
Don’t forget to subscribe!

Авто/Мото

Опубликовано:

26 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 932

@Groot564 4 месяца назад

Ray does his editing must have been hammered 🎉😂

@mikelancaster9930 4 месяца назад

must have been a Friday night edit

@goose32373 4 месяца назад

I'm glad somebody said something. I thought I was having a stroke.

@ForCrynOutLoud 4 месяца назад

Everything is a hammer.

@gavsta 4 месяца назад

completed it all in the chop shop!

@StrangerInAStrange 4 месяца назад

Definitely some 'pregnant' pauses in there! Thought Starlink was going on the fritz!

@mistermcd 4 месяца назад

Your editing of the scenes just stopping kept making me think my internet connection was dropping....fooled me more than once! :)

@CavemanDrewski 4 месяца назад

I cursed out Comcast so many times before I read the comments. 😅

@martinwilliams1784 4 месяца назад

I having the road dug up outside so I thought similar

@GeekBoyMN 4 месяца назад

To me it was like an ad was starting the first few times until I figured out what was going on

@adamsupan 4 месяца назад

Same here 😂

@syedqutubuddin7297 4 месяца назад

My feelings exactly

@pmscalisi 4 месяца назад

I remember when a valve cover gasket swap took about 10 minutes. The design of these engines are ridiculous. Just me being an old guy😂

@thes2kguy 4 месяца назад

That duck is a symbol that you support your local mechanic and pay for their kids college tuition.

@ThePhoenix198 4 месяца назад

Much like you do when you use the local diner, coffee-shop, tailor, hardware store, whatever. Do you get different colour ducks for them?

@treadhead1945 4 месяца назад

Hate the editing on this, it feels like I'm continually re-buffering.

@clbcl5 4 месяца назад

Agreed. Every jump cut gives a popping in my headphones. Farming out the work maybe.

@alexjohnson2224 4 месяца назад

Messed me up at first

@FatdaddysGarage 4 месяца назад

Ok thought it was my internet or something.

@clbcl5 4 месяца назад

Your computer too.

@LilYeshua 4 месяца назад

I think that he's edited the video for brevity. It's a change not not dreadful

@marrowsteven 4 месяца назад

Ray fixes another shade tree botch. Ray you and Lauren are just awesome. Your honesty and automotive knowledge is unparalleled. The $$$ I've saved watching your vids is amazing. Keep up the great HONEST work. Find myself addicted to your videos. It's like having my own automotive class.

@MonkeyJedi99 4 месяца назад

Remember when the JD Power awards were for "serviceability" instead of "innovation"?

@ziggy4465 4 месяца назад

It amazes me how many shops will put a car back together after making things worse and offer nothing to their customers except, “Have a nice day”. Your shop is showing the work they it does…literally. No question that you care about the repeat customer. I remember back in the day, I think it was Ford, the slogan, “Quality is job one”. You definitely take that one to heart. You do take some shortcuts, but it never cuts into the level of your work…and it’s entertaining.😁

@helencollins9107 4 месяца назад

I cannot believe there are so many nitpickers on Ray’s video. Just sit back and enjoy the content the way it comes😊

@nonyabiz2777 3 месяца назад

Right!! If I find any reason not to watch a video I simply don’t watch but I still like just because it’s easy and helps who ever posted it. I definitely don’t spend time writing a rude comment. We normal folks just watch what we like. Perfect observation bravo. Nice!!

@KG5RK 4 месяца назад

Ray ! This design is a NIGHTMARE! (but a GOLDMINE for a service Tech) 😂 I can NOT believe how hard it is to remove that passenger side valve cover. The driver's side wasn't that easy either. This repair gave me FLASHBACKS of changing out KNOCK SENSORS on GM engines. I saw your hesitation about replacing the oil cooler, probably due to $$$. However, just like the KNOCK SENSORS I mentioned, the labor costs involved in a second(or THIRD) teardown make this job VERY EXPENSIVE. GOOD CALL on your part for the aluminum oil cooler housing.

@MrTex1954 4 месяца назад

Who doesn't like the Wife Unit smile? How nice it is to see them working the business together so well! And the narration is wonderful. Kinda Janky editing this time... The abrupt stops were weird... 😁😁😁😁

@Psichlo1 4 месяца назад

came to the comments to make sure it wasn't just me lol

@Beer_Bubbles96 4 месяца назад

Ive been married over 40 years ... (2x) very loving and carrying women, but when they were/are both on thier daily missions in life(like anyone else) its very rare to see smiles(except when i screw up and they both found it funny)

@nonyabiz2777 3 месяца назад

100% we do. It’s nice to see happy marriages and happy kids. Now a days it’s not as popular to stay married and grow together. I’m lucky I married my wife when we were 18 and lucky for me she still loves me after 47 years.All our kids have divorced due to the wife unit needing to relive the lost teen years I guess.

@jw546 4 месяца назад

This video illustrates perfectly why I could NEVER be a mechanic. I lack the patience required, for sure! Thank God for guys like Ray!

@mikeblaz 4 месяца назад

Same and I would forget how to put it all back together...

@lukezins 3 месяца назад

Wow I feel like an idiot. I'm a technician and have done these valve covers a bunch of times, and never realized removing the battery tray would of given me more room to get to the screws to the back for that pcv elbow. I've always fought with those screws from the top. Thank you for showing me that removing the tray will aid in removal next time.

@GapRecordingsNamibia 4 месяца назад

Goodness Ray, what the cuts man!....😂🤣

@mvmorr01 4 месяца назад

He was just adding camcorder pause effects, to give some nostalgia!

@GapRecordingsNamibia 4 месяца назад

@@mvmorr01 🤣😂

@oorlogfish1 4 месяца назад

Hating the sudden black editing screen for the rest as always a very good video❤

@shawnlee3495 4 месяца назад

I like it when your wife is in the video. She is your best half. She helps you run a fantastic business. Both you and your wife work very well together. You are very blessed to have her Ray.

@Propertyinspector 4 месяца назад

They wave at each other on the roads and treat everyone like a friend, Getting a duck is basically a show of respect for your car from another Jeep owner. It's so fun, and people display them in their cars

@jayc4283 4 месяца назад

more like commiserating over maintenance costs

@richardgreen1383 4 месяца назад

Except true Jeepers NEVER refer to a Jeep as a "car". That is an insult to the Jeep. Back in Dec, I was having scans made at Mayo Clinic in Jacksonville (I live in S. Georgia). I came back to my Jeep and found a small duck on the driver side door handle. Made my day!

@obiesunstreak2409 4 месяца назад

Its the stupidest damn 'trend' people come up and touch your junk, leaving some cheap ass plastic 'duck' because, jeep or something. I have had 2 left, tossed them both in the trash. My jeep isn't a status symbol, its not a show car, its a jeep, it gets beat on, driven hard, and put away wet.

@Jerry1951 4 месяца назад

Hey Richard I have a Hummer and I got a duck on my door handle too here in Eugene Oregon thumbs up for you too@@richardgreen1383

@robertquin1695 4 месяца назад

I don't think that you run your mouth. I enjoy your commentary and the way you explain exactly what you are doing. Keep up the good work.

@HaraldBergTechTv 4 месяца назад

I totally agree 👍

@jamram9924 4 месяца назад

Pentastar engine…🤦🏻‍♂️ Our shop has performed several of these oil cooler replacements. We’ve used an all aluminum Dorman cooler and it leaked. It was determined their O rings were cheap (probably Chinese knock off?) We reverted to the Chrysler cooler since the part was revised and used their O rings. It’s a lot of work to access this part, I certainly hope this works out for Ray. I’ve seen him use the Dorman cooler on other Pentastar engine repairs.

@golferpro1241 4 месяца назад

How much do mechanics charge for this job?

@bobbyse26 4 месяца назад

I don’t what’s wrong with the jump cuts, but it makes me appreciate all the more the work that you put in to these videos ❤

@BobbyFranco 4 месяца назад

Same deal here - I thought I was having a tumor!

@MonkeyJedi99 4 месяца назад

@@BobbyFranco It's naht a tumah!

@glenn65 4 месяца назад

1080p or 1440

@joshruby 4 месяца назад

I thought my computer was freezing

@MonkeyJedi99 4 месяца назад

@@joshruby Give your computer a warm hug?

@davidbaize4825 4 месяца назад

Good day to you Ray!!! I have to say, I will never own a pentastar V6. What a mess of an engine!!! I would bet that a majority of your jobs are fixing botched repairs. Jeep should use the straight six in these vehicles. Maybe employ the new Hurricane six? Dave sounded very busy in this video. It was so charming to see Wife Unit doing her cameo appearance. Ray you are so blessed. Great video bro!!!😁👍

@michelleshaw337 4 месяца назад

At least this one didn’t have the optional inspection ports added to the crankcase

@tylermacconnell217 4 месяца назад

“Mess of an engine”? Really? It had valve cover leaks and the oil cooler. Big deal. 147k and it runs fine. The Pentastar should use a little less plastic but it is otherwise a great engine.

@davidbaize4825 4 месяца назад

@@tylermacconnell217 Sir, you are entitled to your opinion, as am I, have yourself a great day 😁👍

@tylermacconnell217 4 месяца назад

@@davidbaize4825 Part of the benefit of being able to comment on a video is to educate - and I don't mean that condescendingly. Ray tends to get down on the Pentastar in his videos, because he has worked on a few bad ones, but they really are a great engine. Good power, good fuel economy, good longevity, smooth and quiet. Relatively easy to work on. Every engine has good things and bad things. The "bad" things with the Pentastar are the oil cooler - which is a pretty simple fix - and cam lobe wear on some of them. That's a harder fix, but also not catastrophic. It doesn't happen to many of them. This engine is literally in millions of vehicles on the road now. It is in its 14th year of production with only one major revision - rare in terms of engines these days. Many of these engines will go well beyond 200k miles with minimal issues. Every mechanic has his biases. Ray originally insulted Fords as much as anything - but his friendship with Arod from Powerstroke Tech Talk has caused his opinion to change a bit. Anyway, buy whatever you like, but taking one youtube mechanic's word is not the best option. See scotty kilmer, for example.

@denkn 4 месяца назад

@@tylermacconnell217 I am happy to hear you say all this. I have a 21 Pentastar and have become uneasy watching some of these vids. I am somewhat easier now, in my mind anyway...

@alabamared2568 4 месяца назад

Glad to see the RAY back in his natural habitat...a day without a ray repair video is like a day without oxygen....which he's gonna need Xtra because it's a pentastar!😂😂

@rodcarruesco5457 4 месяца назад

OMG 😱 you mean the world isn't perfect 😮 love your videos 👍

@billhusted1753 4 месяца назад

I was glad to see that you were careful enough to use a paint matched towel to put it into service mode two. Well done Ray!

@stephenchappell766 4 месяца назад

I watch you every weekday very entertaining and interesting wish we had machanics in england like you you show people the truth very refreshing

@Volusia1 4 месяца назад

Not sure if it was an upload issue but video was not the quality as I’m used to from you. Video was choppy like impromptu stop and starts of shots…. By the way I despise that jeep engine. I wish they had stuck with the I-6 4.0 or 4.2

@GTVAlfaMan 4 месяца назад

Note to self: Never buy a Chrysler/Jeep vehicle.

@pauljefferies9087 4 месяца назад

How on Earth, does anyone remember how it all goes back together? Bravo to you Reynaldo!

@gwcracker 4 месяца назад

Thanks for the time saving edits! I like!

@johnmarino4085 4 месяца назад

Nicely done Ray!

@toddk1479 4 месяца назад

Ray, I always look forward your videos. Keep up the great work brother. Greetings from New Orleans.

@jonmack5359 4 месяца назад

nice turn of a phrase 'severely entertaining' well done Ray

@MonkeyJedi99 4 месяца назад

[Deep Movie Announcer Voice-Over] "Rainman Ray's Repairs. Severely entertaining. Coming soon to a RU-vid video near you."

@LiberalsAreTheDevil 4 месяца назад

I am not a professional mechanic but I have watched you do this enough times to see the shoddy work that has been done to this vehicle. I think it is a great thing you film this stuff so if there is any question it can be answered in video format. Screw the haters as they are everywhere and on every channel. Great job and always look forward to you content,,, and the Mandatory Wife Unit Appearance. 😁

@mjac8373 4 месяца назад

Great video as ususal, nice touch on the eiditing scene changes. Ray ROCKS!! I bet this will be a 3-part series, based on the wonderful advernture you are having with the fuse box... : -)

@ljerry8440 4 месяца назад

Never heard severely & entertaining used in same sentence b4. Good work!!

@ryulee458 4 месяца назад

Good morning Ray 🌄 another blessed day 💜🙏

@josephvantreeck2989 4 месяца назад

Thanks Ray

@NoName-yr1jv 4 месяца назад

Well done Ray 👍

@denniswi9408 4 месяца назад

I cannot count how many things you disconnected. You have to really love this type of work.

@Mark-zz9rt 4 месяца назад

New mechanics watch this man he’s patient and smart two traits that are a must to be a good mechanic 😁👍

@forthefunofit5487 4 месяца назад

I got a headache thinking about how that is going to be to put back together. I love your channel Ray. You are awesome on what ya do.

@vickvick8556 4 месяца назад

Thank you for responding to the editing cause I came back after about 3 months and didn't know if that was your new style. 😊

@marklowther8792 4 месяца назад

As a diy'er, I love you're confidence. I'm always concerned I'll forget how to reassemble.

@Papieck37 4 месяца назад

Fantastic video Ray.... Those oil Coolers are a nightmare!!

@brianpiper3188 4 месяца назад

Yes they are!

@epislash6736 4 месяца назад

I'll be saving this video. I e owned my 2015 wrangler for 9 years now, no leaks fingers crossed.

@sfnnll1289 4 месяца назад

When you said the engineers made something easy for a mechanic at 3:30 I knew you were in for it. You pushed your luck taking connectors loose saying it would be "easy peazy." Then karma bit taking the rt cover off. In the'80s engineers would come down to our hangar floor and confer with mechanics on best ways for mods or special repairs. We've been replaced by cad programs so the engineers never have to go out of their cubicle. Keep up the good work Ray.

@larrymixer144 4 месяца назад

Back in my younger days we started a racing club that would race street rods at the drag strip about fifteen miles from us. When we would meet in one of the local towns and drive where all the locals would cruise on weekends. When doing this we would have rubber chickens and throw them into other members cars when passed the or ended up next to each other at a stoplight. We also did a thing with pint jars and tropical fish. That we set on the center line of the street at the stoplights and either we put one down or picked it up, depending on if one was there or not. I thought about doing that with the girls we riding with us but we all decided to nix that in a hurry because of the trouble factor. You mentioning the ducks in the jeeps reminded me of the crazy old days.

@paulgaerisch7041 4 месяца назад

I’m glad I get to see what’s involved with replacing that oil cooler. My wife has a 2016 jeep wrangler as well. Only 40000 miles on it but I see the headaches coming in replacing the oil cooler assembly. I’m planing on ordering the aftermarket aluminum one this summer. Just as a precaution. I can’t do the job myself, so I’ll ask my mechanic what it’s going to cost for the job. He’s ok with me getting the parts. Thanks Ray.

@golferpro1241 4 месяца назад

Same Jeep. Mine has 85,000. So far, so good.

@golf25radioman 4 месяца назад

Yet another repair that requires so much disassembly to get to the engine parts. Again, Ray, you do not hesitate to remove what's needed. Thanks for the Lauren cameo added in. Love them being required! lol 😄

@computergurujl 4 месяца назад

@rainmanray hello and good day to you. Thank you for making this video and thank you for doing everything you do to share your diagnostic process with us all. I'm looking forward to part 2. 😊

@theodavies8754 4 месяца назад

Might have to get a recent jeep for those years when nothing keeps not going wrong with my 2003 Nissan. Good to see a LHD with a bonnet where the hood was.

@bikesskills5619 4 месяца назад

I’m not trying to” nitpick” you ever,I love your videos and your personality, but if something has a heavy oil leak shouldn’t we always check the fluid before we start it even to move it in the shop, not only good practice but to teach Younghans that as well, but again I thumbs up all your videos and you’re truly inspirational doing most of your work one-handed with the camera and other, you’re a good human being God bless☝🏻🙏🏻💯

@golferpro1241 4 месяца назад

Absolutely

@adamdalejohnson 4 месяца назад

Ray you were talking about hoping your customer didn’t make this repair and making fun of them. I kind of had the same thing happen. I am a mobile heavy equipment, tech, and I drive everywhere. Well in Atlanta traffic, I didn’t road rage, but I was discussed with someone driving near me. They cut me off. I was mad wanted to tell him how bad the driver they were. But I didn’t. Then I realized when I pulled into my first job, it was my customer. After that I am very careful who I externalize my anger towards. 😅

@daviemcpherson4221 4 месяца назад

Love the content as always. The editing not so much on this video. Thanks for the channel Ray 😀

@xpltd1 4 месяца назад

Thanks!

@jimforsyth2. 4 месяца назад

The battery tray is so fun to pull out

@jonclassical2024 4 месяца назад

Good Morning Ray, this was very interesting, especially since "everyone" touts the Pentastar as being a great engine....maybe after Ray replaces some of the worst plastic parts! Can't wait to see it all go back together, all back together and break-cleaned off and tested for oil leaks.....sure is a beautiful Jeep though...I hope the customer plans to keep it for a long time!

@xpltd1 4 месяца назад

watching this video makes me love my 4L 292. thanks

@xpltd1 4 месяца назад

or 232 idk

@eduardoflores2510 4 месяца назад

Hey Ray and old trick to putting back those wood screw type fasteners back on, hand rotate them backwards until they click then tighten them down.

@rogerfleury3591 4 месяца назад

204th! Have a great Monday Ray and your super wife unit. And that also goes for the new employees. Not a Jeep fan. And watching your efforts to diagnose let alone fix it was a nightmare and bolstered my opinion of the brand. I wish you all the best in fixing this mess. Roger in Pierre South Dakota

@keithdonaldson3945 4 месяца назад

Got wife unit compliance and chipmunk before halfway point, how cool is that! And a reeee not long after.

@1DarkStorm 4 месяца назад

Welcoming back!

@prairiedog3918 4 месяца назад

Do what you want,say what you want i will always watch.

@doctorjohn-burgtekie 4 месяца назад

Talk about a engineering cluster. Ray you have a lot of patience.

@mikestamm3595 4 месяца назад

I love watching your videos. I just want to give you and FYI. I did the passenger valve cover gasket on my 2014 wrangler last month. To get to that lower PCV bolt remove the fender flare and wheel liner. It makes it a whole lot easier to access the bolt without removing the battery tray and fuse box.

@kevinb8285 4 месяца назад

Those cuts are brutal,in my opinion. Love ya Ray

@that_bitch_emily 4 месяца назад

I like the things you say!! Run your mouth as much as you want!! Seeing you from the beginning to now, I’d say everything you said when running your mouth at the previous places, it was well-worth the running. It’s such a blessing to see not only how far you and Lauren have come but also to see you stick it to the man and prove all the nay sayers wrong. Very proud of you both and still such an honor to be a part of it from the interwebs. If y’all are ever in Colorado, let me know! I’d love to cook or take yall out to dinner.

@vc8939 4 месяца назад

Good morning Ray, again where is the Dave ‘sighting’?? LOL! I sure hope that your customers appreciate the ‘extra’ diligence that you do for them. I wished I lived closer to your shop, even though I own das autos. 😂😂😂

@andyvitz 4 месяца назад

Can't wait for part two

@gonzgarr1592 4 месяца назад

great job

@herjeeplife 4 месяца назад

I recently did this exact job on my friend’s 2015 Wrangler. Both valve covers were leaking but the there was something bigger leaking as evident from below, just like this Sahara. I tore down the intake manifolds and found lots of oil in the valley too. They had upgraded to the aluminum oil filter housing a year prior. I originally was diagnosing and repairing a 5V ref intermittent fault that I was able to trace to the oil pressure sender. The oil cooler was leaking oil between the cooler and the housing, not from the housing unit itself. Those Dorman figure 8 replacement seals are crap. OEM seals for the housing and cooler are red. I noticed how stiff the Dorman figure 8 seals were compared to OEM. As soon as you turned the cooler sideways, oil poured out of it. Also, the Sahara’s driver side valve cover was replaced with, what appears to be a Fel-pro gasket kit, as their spark plug gaskets are brown. The OEM valve cover gaskets and cam sensor seals are black, as seen on the passenger side. The Fel-pro cam sensor gasket is blue as seen on the driver side. Therefore, only the driver side valve cover was previously attempted to be fixed. Be sure to replace that PCV valve as that’s part of the problem under that valve cover. Great work!!

@aureliendesthieux2263 4 месяца назад

You're definitely the man that car need to live longer !

@arianrhod 4 месяца назад

As the Car Guys used to say "Where there's smoke, there is a Saab".

@uprighter65 4 месяца назад

Hey Ray, been watching since right after you left the dealership. My wife unit hates your videos (and all other auto related vids I watch... you're in good company!). but I watch nonetheless. Just wanted to say I appreciate the shorter videos.... 35 minutes vs 1:10 vids. Just figured I'd give you some feedback. I work in healthcare and my job is all about diag and troubleshooting. Love your approach to problems. You'd be amazed at how close some of it is to working on the ICU. Love working on my cars on my off time. Thanks bro!

@bobniehaus5053 4 месяца назад

I’ve thought several times watching you work how much time and pain it takes to just get access to the problem. Makes me miss my first car 1966 Pontiac Catalina “boat”. So simple back then (says the old geezer!)

@patrickinottawa27 4 месяца назад

Even in the 1970's and the econo boxes of the 80's.

@barmanvarn 4 месяца назад

For that lower bolt on the PCV, I think some people have had decent luck removing the wheel liner and going in from the wheel well. I'm changing mine this weekend and that's my plan of attack.

@Uticagreens 4 месяца назад

You make me feel great. You managed to tear that Jeep down without using one 4 letter word! I had to dissemble almost as much on a Hemi Ram. A good many of my curse words started with the word "mother." It was good to see a wife unit appearance. Nice work!

@jeffhudson1744 4 месяца назад

great video. just got my truck from the second dealer who wanted to fix it. the first, not sure what they wanted to do but it wasn't to fix it. another 1500 miles then I get to do it.

@eddykirksey8836 4 месяца назад

Nice video!

@johncolligan5128 4 месяца назад

You may want to suggest the oil filter adapter from Baxter Performance, holds oil at the top of the engine to prevent dry startups which are harmful to the valve train

@tyh6243 4 месяца назад

The aftermarket oil coolers have been known to have leaky seals. Proceed with caution and consider using Mopar seals.

@johnmoloney5296 4 месяца назад

Im glad you mentioned the editing glitches on this, i thought it was my device

@BradOMahony 4 месяца назад

Here is a cool thing to try when changing the crush washer on the oil plug. Take the cap off the oil and put a shop vac in the hole where the cap goes and turn it on. That will allow you to go underneath the vehicle and unscrew the bolt and you won't drop a bit of oil

@OttawaOldFart 4 месяца назад

Breakfast, coffee and Ray. Best start of a day

@peterneal7160 4 месяца назад

I've done quite a few of these! I've never taken the Battery etc out! Some PCV Valves have 3 screws! What a pain taking all that crap out to get to those screws!

@raymoss1978 4 месяца назад

I have a 2011 dodge durango and I replaced my oil cooling housing in June of 23 and the new one went back out in August of 23 so I did go back with the all metal after market one

@davidmorris436 4 месяца назад

You make it look easy Ray !!!!

@opendstudio7141 4 месяца назад

Thanks for sharing your mechanical nightmares. 😉 That engine looks like it needs to join the Fararri-bird and PT Cussers in the ol’ car crusher as well.

@Invisibleman7 4 месяца назад

Always enjoy your videos Ray. Although the cuts in this video made me think adverts are coming 😂

@anntomecklebarger3599 4 месяца назад

You speak in a non- sugar covered truth. People dont like that anymore, but I do.

@kilbinator7056 4 месяца назад

Battery tray removal is zero bolts after the battery is removed on a ton of imports. Love to see it.

@stanSnider 4 месяца назад

Good morning Ray

@jameslastname9171 4 месяца назад

Champion plugs are fantastic! …. for that push mower you find on the side of the road.

@ImIcarus 4 месяца назад

Quite literally just had to do this repair myself on my 2018. Lol it didn't go as smoothly as you made it seem, broke the coolant temp sensor on the back as it was corroded in the housing. The Dorman aluminum replacement is great.

@osvaldoqntn5 4 месяца назад

Some high end editing job, but wouldn't have it any other way, keep doing you Ray, have a good day

@randybeard6040 4 месяца назад

A small child plastic swimming pool works great for catching anti-freeze and eliminating mess on floor and you can use it for many years if kept out of weather...

@syedqutubuddin7297 4 месяца назад

Rain man Ray a professional 👍

@pw9267 4 месяца назад

Pretty blue color!

@solargarage 4 месяца назад

Looking good.

@ianjay5301 4 месяца назад

Our local rural mail carrier has one of these Jeeps - and drops oil all over the place, especially at the community mail box.

@kenklingenberg4680 4 месяца назад

Just think of the oil as a rust mitigation effort. I kinda like the cut-to-shot style, Audio was a bit iffy at the start but, to quote Judge Stone's Father, I'm much better now. Thanks for all your efforts and Hello to Wife Unit.

@fan1701 4 месяца назад

Glad to see chains under those timing covers and not a belt. Makes me feel better about my Cavavan with this engine.

@desotosky1372 4 месяца назад

I'm not sure on that. My 2005 Forester had a belt and was a very quiet engine. Current 2015 Outback uses a chain. Annoyingly noisy engine, especially cold.