Bad Chad found another project... 1956 Plymouth Savoy Club Sedan V8 🚨

Подписаться 319 тыс.

Просмотров 353 тыс.

50% 1

We found a 1956 Plymouth Savoy Club Sedan V8 for sale that runs, drives, and stops. The only problem is the listing price is a lot higher than we're willing to offer.... 👀
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #1935plymouth #pickuptruck #1935plymouthtouringsedan #customcars #hotrods #classiccars #cars #fabrication #metalworking #badchadcustoms #automobilererpairshops #bodywork #suspension #autobody #evercoatprimer #primingacar #autobodyrepair #rustrepair #paintprep #primer #badchadandjolene #car #classiccars #hotrod #automobilerepairshops #paintjob #paintingcar #conceptcar #behindthescenes #designing #cardesign #sheetmetal #fabrication #rustrepair #custom #customcars #metalshaping #metalworking #metalsheathing #migwelding #lincolnelectric #fabricating #cars #car #classiccars #classiccar #roofchop #coupe #metalworking #metalshaping #metalfabricator #metalfab #plymouth #runningboards

Авто/Мото

Опубликовано:

13 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 597

@chitown1098 Год назад

My grandfather had one of these (1956 Plymouth Belvedere), light yellow and white with white and black houndstooth interior as well as a huge white ivory steering wheel and push button trans. The yellow was where the darker brown is on this one and white everywhere the lighter brown/tan is. What a beautiful car. My grandfather took incredible care of the car. He even painted the engine and would work on it himself. Unfortunately in 1972 someone t-boned him and destroyed the car. He and my grandmother were crushed since they had had the car for 18 years.

@JoeZyzyx Год назад

My first car in 1972 was a 4 door, 1957 Plymouth Plaza. It had been my grandfather's. No seat belts. 318ci engine in it. Fun car. I like watching that movie "Christine" (has the Fury) at times to remember it. No twist on oil filter, but the older can you put a filter into. Mechanical voltage regulator and a generator as I recall instead of an alternator. Bench seats, front and back, and could pile 8 people into it. It was a fun car. Easy to work under the hood too.

@JoeZyzyx Год назад

I remember the mechanical regulator had to be "polarized" by creating a short across the contacts in order to properly set it for the generator, if you plan to keep the original type charging system in it.

@kammyHS Год назад

I’m thinking this guy just wanted to show you everything he has- 😂 Chad wants to talk about the car that’s for sale and there is no end to this guy😂😂😂 out of breath and breathing hard! Chad and Jolene can’t wait to watch this build! Thanks for taking us along on the adventure ❤

@hotrodray6802 Год назад

Finessing the seller is part of the buy.

@troyleach2095 Год назад

That’s part of the deal. Whenever you buy off a collector, you gots to see their goods. If they don’t show you their stuff, then you probably ain’t gonna deal, cause they don’t trust ya.

@philipbrailey Год назад

Obesity is a problem.

@MoparArtbyautomolove Год назад

This was my car for a few years. Bought it out of a barn in Hoyt, New Brunswick. It originally came from Louisiana. I traded it to the mustache guy for a 1968 Plymouth Barracuda.

@highlandsoutdoors2041 Год назад

Looks like she had a rough life was it a pile when you had er and did the trans leak

@davidrogers3016 Год назад

Can’t wait to see what Chad has in mind for this vehicle. Chad and Jolene will entertain us again. They set the bar real high with the pickup conversion.

@THROTTLEPOWER Год назад

I agree David!!!!!!

@craigmonteforte1478 Год назад

this one Cracked me up my Dad had a late 70# Mopar and this motor and the start up sounded exactly like the one My Old Man had I do not remember the make or model my Dad inherited the car from his Fathers Estate ironically i moved 100 mils and i was given that car to use as a tow vehicle for a MG B i pulled with a tow bar to my new location and i sold the old Mopar when i got settled i liked that car because it still had the old fashioned fresh air Vents under the dashboard and on the highway with a window slightly opened you had a heck of a Vortec of fresh air throughout the entire passenger compartment

@billhoward7730 Год назад

You did a great buy on this car. A lot of the 56 Plymouth had a lot of rust issues. The body on this car is extremely solid. 1956 Plymouth was the first year to have the tail fins, one year before the 1957 Chevy. I am an old Mopar fan and love these older Mopars. Great purchase and great video. Bill

@victorsweet583 Год назад

Your right about the rust...even other cars in the family has a lot of rust issues like some of the old challengers and chargers darts cudas and so on

@1022SLB Год назад

I do not know how other people feel, but I’ve become disenchanted with how these builds often end abruptly and you move on. The cab over, the Bugatti, and now the pickup… I believe many of your fans would like to see a complete build. The truck pushed me over the edge as I wanted to see it taken all the way thru paint. I have a great imagination, but I’ll just move on to One of the plethora of other shows that at least give us our cargasm! Bitchin Rides, Iron Resurrection, Shortys Dream Shop, Texas Metal… Ian Russell and even Richard Rawlins… they all complete the builds.

@michaelbristol6467 Год назад

Richard Rawlings never built a car in his life he just spots the $$$. 😎✌

@freddieweimann3602 Год назад

Bad Chad is a metal fabricator not a mechanic....

@rijobaabojir2779 Год назад

I agree, it is frustrating. Much like tuning in to watch someone bake a cake but who quits halfway through and starts to make cookies. I believe Chad's skills and interests are limited so he concentrates on what he is capable of doing well then moves on. But it would be nice to know in advance how far he intends to take a project before we invest so much time watching him cut, shape, weld and fill over and over. There is so much more involved in building a car that many of us are interested in and would like to see. This is not bad mouthing, just some personal thoughts I decided to share. I still tune in but not nearly as often.

@michaelbristol6467 Год назад

@@williamoliver8883 yeah that's why Gene Winfield goes to his shop and paints his cars because he's a "charlatan". Boy some of you haters are pathetic. 😂✌

@michaelbristol6467 Год назад

You probably never heard of Gene Winfield I bet.

@vincentfalso4687 Год назад

Nice deal and I love the design of that car……WoWW! You and Jolene will have a great time making it your own. I would have like to see the other two cars. I kinda like a four door dropped and some 18” steelies with dog dish caps or bullet center caps…. Anyways, they’re yours to fiddle with…. Love em’!

@robkayce6964 Год назад

Good score on that rare’56 Plymouth! Love it! Love the dashboard. It’s gonna look mean and muscled when you give it the love it needs! It’ll give the ‘57 Chevy a run for its looks and popularity when Bad Chad fine tunes her. Look out! :) Congrats on your purchase. Fair price. You done did good. I know Jim bo is gonna be impressed when he sees her! A good deal is when the seller and the buyer are happy.

@jacklioyd8571 Год назад

First thing I saw was, it would look cool with some Packard tail lights. It runs pretty smooth. Looks like a new project. Car seems to be tight when you shut the doors. You got a good deal on that car. Congrats. Jack.

@bradleymckay365 Год назад

That front grill is freaking awesome 👌

@71treestudios35 Год назад

We love you and Jolene and all the hardwork you guys and the Fam put into these cars and memories on wheels keep educating and absolutely killing it you along with a couple others have motivated me to go to school for auto body thank you keep inspiring!!!!

@liljohn1064 Год назад

Nice find. Should be an easy project.

@marklee81 Год назад

22:17 Whew!! You had me worried, Chad. I really enjoy your paint videos and I kept thinking, "That car isn't rusty enough for Chad." It doesn't need a restoration or a huge transformation. Just style.

@jimk7882 Год назад

Great find. Everything is there on that car and it's all in good shape. You can tell straight away that the car is a good one by the panel fitment. On top of that it runs and drives. This is the perfect type of car to start with

@algreen2242 Год назад

What a nice honest car. Great interior. Congratulations.

@simplysimon9868 Год назад

Chad the poly motor can be converted to a Hemi. The heads were made to bolt right on. Not sure if you saw Alex Taylor and the Hot Rod Plymouth Savoy, they made a race car in 24 days with a crate motor Hellcat. Great shape car!! Mopar or no car. Nice place the guy has there.

@bbigtn Год назад

I remember trying to sleep in the back window area of our Plymouth Savoy when I was around 2 years old and my older brother and me had to sleep in the car rather than in a cabin with our parents and sister at yellowstone Natl park. Don't know if it was a 56 but that back window area reminded me of that. I rolled off and landed on the back seat a lot. Who knew David Crosby had an old Plymouth for sale?

@petetap4255 Год назад

Need some furry windshields for your mic's. That'd make a huge difference. Great deal on the Plymouth ...earlier comment said it'd be good to pair up with the pick - up. Inclined to agree .Reckon they'd look great side by side with inverted paint jobs...but,the decision is yours,looking forward to the makeover guys 👍👍

@davidbellomy8605 Год назад

Thanks Jolene and Chad for the ride along! Can’t wait to go along on this journey! Another cool hot rod!!

@williamdahlen1654 Год назад

Hello Chad & Jolene. I hope that you both have a great day today. Good luck with this build.

@Joe-lj3ir Год назад

Great find. Can’t wait to see what you guys do with it. Thanks for sharing

@deandee8082 Год назад

something like that here in the states would be like oh $14k to $18k USD? of course here in the USA they're a Belvedere, different paint schemes and trim levels, engine options so forth run a guy at least 3 times that amount for the similar condition.. a dead minter is around $35k+ low mile dead mnter $70k+ ... that one has the big engine so more likely than not holds a premium for that alone, freshened up that car is worth triple that easily... nice ride for sure, the mid 50's were it for the automotive industry, real power arrived, auto trans, limited slip, and unlike any other generation they were the heaviest of all cars ever made, better steel, thicker gauge, heavier genuine chassis, the ride is like no other..

@leonardhill1218 Год назад

Right Rita

@danhanson6577 Год назад

Wow great build guys was really hoping you would pair the truck!!!

@ronnieniebrugge8229 Год назад

Now him and Jim can go cruise in their 50s cars Love the shoebox looking cars

@THROTTLEPOWER Год назад

Great looking Plymouth!! 😍👍

@davescheer5038 Год назад

🌴this was my grandma’s car her’s was two tone red and black ,mom inherited it after gram passed ,it wasn’t fast but it was trust worthy, this will make a great ride chad and Jolene, 👍

@daveanderson2865 Год назад

Sweet car. It looks like a car made for the drive ins.

@joemaderak6449 Год назад

I am glad to see that you are not cutting the roof off or chopping it. A nice paint job and slight custom works for me.

@michaelbuettner6560 Год назад

My dad was a Plymouth mechanic. I learned to drive a 52 Plymouth 4 door retired taxi cab. Now I have a 52 Concord Plymouth fastback... Love the Plymouths.

@michaelbrookover8018 Год назад

Pretty cool you took the time to look at his collection! He was so excited to show you everything and you were not in a rush or frustrated, Classy 👍🏻😎

@robertdehaes7572 Год назад

Looks pretty solid and it is rare, got to see price later.

@oldredchevy-hh6de Год назад

Some people might say, "what a shame to not restore it to stock". Little do they know how costly that would be. Many times what it would be worth after. These just are not valuable, high-demand cars. Note, that's why it's sitting around unrestored. At least Chad can be creative with it, while entertaining people, and doing what he enjoys.

@tjakr3869 Год назад

You are correct spend 20K on a 10k car

@deandee8082 Год назад

a guy chops that and he goes backwards in every term of the word..

@drrick8839 Год назад

What’s a correctly restored one worth! $10-12K, assuming it runs, stops and shifts right and has a paint job equal to factory as well as a full new interior? Throwing $12-15K in the fire pit is a lot less work! A lot of people think that a car has high value just because it’s old often get a rude awakening when they offer it for sale ,

@tjakr3869 Год назад

@@drrick8839 same when people sell their old cars. Old used cars are often overpriced. Whenever I consider purchasing a car I always ask, can I make money when/if I re-sell? The answer is more often no especially on old cars.

@kevinmcleod3741 Год назад

Yes I agree with that statement ! Doesn't matter what shape it's in other than new it's just not a collectable high end car !Thumbs-up on doing something creative with it .

@deandee8082 Год назад

you can tell this guy has worked hard to get what he has and tries to stay organized but has gotten to that too much stuff point time to lighten the load.. the where is it gremlin seems to appear out of nowhere, I'm in that same boat a lot as well, "now where did I put that" or "where is that" OMG... try to be as organized as possible, I've come to the conclusion its a matter of having too much stuff, doesn't matter how organized you are or how many cabinets or trays, chests, or containers, at some point its "where is that chest or container".. lol ... gorgeous car, pretty damn good deal, things must be a lot less on the island than in the lower 50, with exchange its a lil' over $5k usd.. you don't find good solid runners of any vintage year for that money here.. why can't I find something like that, that be my daily driver, serious, 1/2" larger exhaust with duals cats and 2 mufflers each side so you cant even tell it's running... straight sleds they are, comfort cars, modern tread and suspension they float down the motorways, fire up that tube radio... lucky

@richardrussell500 Год назад

I owned a 1959 flatbed Dodge truck with a Poly 318, which had a stump puller transmission with 4.11 gears in the rear. Great engine. Stop speed was 55 mph. Just be advised that finding parts for that engine is hard to come by. Beautiful car.

@tuat.mvpformallybigd.2635 Год назад

That guy was so thrilled when Chad said I think I'll do it. Lol he cranked it before Chad got there

@ate-updesigns9186 Год назад

Could be really cool old car..something you don't see every day...im sure if chad gets her...he'll make it really nice...thanks for taking us along...see yas tomorrow

@jjock3239 Год назад

That is a nice find. The tri-5 cars of the big three auto makers, are high among my favourite cars. I didn't like the 55 MOPARS so much, but I thought they made a big improvement in 56. I hope you enjoy the car.

@1575murray Год назад

The 1956 styling was definitely an improvement leading into the longer and wider 1957 models. All the big three automakers were going in the same direction while competing for market share. Unfortunately, Chrysler suffered later in the decade from poor quality control and body designs that tended to rust out prematurely especially in northern climates where a lot of salt was used to clear the roads in winter.

@jjock3239 Год назад

@@1575murray I'll second the quality control issues with MOPAR. A buddy of mine, had a 57 Plymouth 2dr Hdtp, and even though the car was only 4 years old, It leaked at the front windshield, and the rear as well.

@randyphenicie4322 Год назад

Nice find!

@robmcqueary2482 Год назад

I love your videos and the way you make things work impressive 👍🏼 I also have a random question I have a distant cousin that used to own pharmacies in Nova Scotia called Macquarrie pharmacy was wondering if they still exist?

@TheTreasureGuard Год назад

That Savoy is a treasure worth guarding

@mrcaps1971 Год назад

What a gorgeous car she is! Here in Australia, anything that old is considered desirable and would carry a price tag 4 times what they paid, and in far worse condition. Are Chad and Jolene still coming to Australia soon?

@trentmunn9486 Год назад

Love the respect you always show to Jolene.

@anthonymurray8025 Год назад

I think you got a good deal on that car looks like it’s in pretty good shape

@Tootall72 Год назад

Nothing beats the old Plymoth script in the logo!

@robertbragg9364 Год назад

That property is absolutely perfect, and this man seems to be very deserving of it. I love what you do, and I enjoy your videos a lot. Be safe and have a good one. 👍

@patchadams4me Год назад

Awesome!

@johnblood3731 Год назад

Jolene does a great job recording. And the content is very interesting. Can not imagine how good this car will look when Chad works his magic.

@waltmarks9720 Год назад

Looks decent 👌 👍

@johncarney482 Год назад

My grandmother had same year and it was black I was like eight years old (1965) and I found that you could open the cowl under dash to let in fresh air, I'm always interested in this car and year.

@FransvandenBergeMuziekschuur Год назад

I love those cars. Fixed right and shined up they make beautiful statements.

@highpeak9512 Год назад

Bad 🪖Chad and Queen 👑Jolene congratulations 🎉can’t wait to see what you do with it. Away from New Jersey USA

@kimberlywilliams9757 Год назад

That's not a bad find! That car can definitely be made cool! Can't wait to see what you guys have in mind for it. (If you got it) Thanks for sharing! 👍

@bennys.8814 Год назад

Another great video thanks guys

@David-uu1oj Год назад

I really like that interior 👍

@poorfesor Год назад

I had the Dodge version of this two door hardtop, great car even with the 326 engine. Honestly back in the day I never paid as much as a thousand dollars for any car, last car we bought was closer to Fifty thousand. Times do change.

@patcaza6166 Год назад

nice find, guys cant wait to see this project take shape !

@glenbo2464 Год назад

Very cool and un common car and model ! Love it !

@adriennefoley2906 Год назад

Love the dash ❤

@swain00420 Год назад

Get it Chad, can't wait to see what you come up with on this bad boy!! Excited to see new content after the truck conversion. 💪✌🤛

@Tanman-lk1hk Год назад

Awesome find.. all in tact

@tuat.mvpformallybigd.2635 Год назад

What has he got in mind for this car? We'll have to wait and see.

@lefistr Год назад

👍👍👍👍

@kenmatthews6476 Год назад

I do love the dash of that old beast.

@roymazac2532 Год назад

Road trip. Thanks for sharing

@felinebline7154 Год назад

What a super nice straight original car!!!

@kevinmcleod3741 Год назад

Alot of potential ! This would make a great project car ,, only if it's for the right price .

@cannabisticannabisticino2718 Год назад

Nice car with tail fins, running engine and interior looks fine too. It will be a good project. Well done guys. 😎👍

@sragga Год назад

bought my '56 plymouth savoy when i was 16 as a first car, but it was a flat head 6 three on the tree. whats left of it is sitting on kraal ter off washmill lake rd in clayton park. can see it in the fellas yard on satellite view(red with black roof). lots of road trips with it over the years. lost my winter storage for it and the salt air rotted the hell out of it

@denisomeara6140 Год назад

318 Poly motors are awesome. I have two and they never failed to start. I think the 4 barrel intakes are making about $1200 in the states but you've got a twin 4 so that would be worked a lot more.

@moyadapne968 Год назад

Great engines, but not a '440' block, as you know. Probably 277 or 303 cu in.

@hotrodray6802 Год назад

Itza 277 at 180 HP. 318s didn't exist until 59 i think.

@hotrodray6802 Год назад

@@moyadapne968 It's the same block as the small hemi. The poly heads were cheaper to make and used on Plymouth and trucks.

@moyadapne968 Год назад

@@hotrodray6802 Google: 'The 277 "Hy-Fire" was the first A-block engine, produced for 1955 in the fall of 1954 and sharing almost nothing but the basic concepts with other engines built by Chrysler'. The A engine was first released in 1956 and was used exclusively in Plymouths until 1958 and in Chryslers and Dodges from 1959 on. NOTE: The Desoto and Dodge 270/315/325 poly was not related to the Plymouth Polys, using the same bottom end as the Dodge and Desoto Red Ram Hemi, but utilizing similar head architecture. Also NOTE: The A engine formed the design basis of its successor, the LA engine, evidenced in the many parts that interchange between the two engine families. * I will say, only the '62-on cranks could be used in LA's. 303 (I didn't mention 318 :) also available in '56 Plymouth. Not related to early hemi. The old hemi used a valley pan. I don't want a medal, but I've owned 48 Mopars, and rebuilt many polys from '56 thru '65. Hope this clarifies things. Paul. ps, my white '62 Dart h/top has a factory power pack 4bbl 318 poly.

@brianandglendaharkin9457 Год назад

There is the 313 poly an the 318 poly here in Australia to 1963 some guys do have parts for them. Top motors

@LoneWrencher Год назад

that extra engine would have been nice if you could have gotten a package deal

@scottdahl1938 Год назад

I loved the interior what I saw of it. The beast screams "Touch me Chad! Do me like you do, do,do! I want that voodoo that you do so well!" Maybe modernize the suspension and power train. But the body work and design will come to you. That wind was savage and the air compressor had to be brutal on Jolene.

@scottdahl1938 Год назад

@Dm_me_Nicegram_mr_Bad_Chad For some reason I don't think Chad would be soliciting me from Nicegram. Call it a hunch but I bet you do this to a lot of his subscribers.

@williamgroel2880 Год назад

Nice car 🚗 👍😎

@jamesfitzgerald2361 Год назад

Alright Chad a DODGE fan I'm a mopar guy myself. I like the older ones. My brother restores older cars in Wisconsin. Really like your show keep up the good work you and Jolene. God Bless.

@MrMechanicandy Год назад

The one they built on hot rod garage was pretty wild

@Roddyontheblock Год назад

Enjoying this ride 😂great place great collection ! Nice classic car

@michaelamos2336 Год назад

Got to get the fender front fender mirrors for it

@hotrodray6802 Год назад

Those we're after market. Outside mirrors were not required in the USA until @63 and driver side only. I like those little street rod mirrors.

@jaychandler62 Год назад

great buy

@MrMechanicandy Год назад

Nice building

@darylmorgan9887 Год назад

Nice looking car, cant wait for the next project.

@1944chevytruck Год назад

awesome!

@rayhall3010 Год назад

Bad Chad please don't take this the wrong way , I'm from Alabama, I live here now,, when you visit Jim Bo and like on this video,, you Canadians , talk and do the same as us southerns ,, the only difference is the language, love you guys , I got to spend some time with your guys,, while in the military,, I'm excited for the next build ,, you are great and have proven it , I have every respect for you,,

@chrishambling1981 Год назад

Great score 👍 unique ,what Bad Chads all about cool stuff 😎

@chrisholland8843 Год назад

Love the straight Wing back good-looking car

@b.a.d2249 Год назад

Thattttts nice!

@aabartu3 Год назад

That's a real beauty!

@boduke2746 Год назад

👍

@BARSOUTANDABOUT Год назад

That sound 😎👍

@mikekelley5951 Год назад

Awesome 😎

@dirtykustomz Год назад

That’s sweet car love the two tone

@charlesbrain3872 Год назад

Bloody stunning

@CaptainCurt07 Год назад

Cad is just cool dude love watching

@jumpinjojo Год назад

So is Chad.

@danielplummer6385 Год назад

A Plymouth Savoy will make a great project car, they are ugly and beautiful all at the same time. I love them and can't wait to see you get started on it! Great buy Chad & Jolene, I can see Chad is excited and so am I!

@dccheek7495 Год назад

That one will make one sweet old school ride

@joeblast81 Год назад

Nice 👍

@donfillenworth5702 Год назад

Sweet looking car!

@synkraut9633 Год назад

I like the idea of driving a buggy - if there’s a driveable beach nearby but I never understood the appeal of trikes: same disadvantages as motorcycles (out in the weather etc) but none of their advantages (like being able to wiggle through traffic jams) I drove nothing but motorcycles for nearly 8 years. The savoy is nice though!