Bambu Lab A1 Mini ULTIMATE Upgrade - Fully Automated Plate Removal Mod

Подписаться 8 тыс.

Просмотров 20 тыс.

50% 1

Get your PCB, 3D printing, CNC Machining services and more here: www.pcbway.com...
Swapmod: swap-systems.com (get notified when it's released!)
Discussion Forum: forum.bambulab...
I'll update the links once the SwapMod Kit is released, so make sure to come back and check it out!
If you find this video helpful, make sure to hit the like button and leave a comment on my videos. This will help the channel to grow and allow me to continue to make videos like this. Thank you so much!
#3dprinting #bambulab #a1mini #swapmod
*My Printer*:
BambuLab A1 Mini Combo (with AMS lite): shareasale.com...
BambuLab Filament Swatches: shrsl.com/4p6tq
BambuLab Textured PEI Plates: shrsl.com/4opva
🔗STL Links:
V-Spooler Mini: makerworld.com...
Swatch Displayl: makerworld.com...
USB cable reel: makerworld.com...
Polar Bear: makerworld.com...
SUPPORT MY CHANNEL
YT Membership: / @lukis3d
Patreon: / lukis3dstudio
🖨️ 3D PRINTING Accesories
My Go-To filaments: geni.us/A4OFomi
A1 Mini Lubricant for X,Z,Y-Axis rails & idler pulleys:
amzn.to/43WOxa2
geni.us/O8wrC
A1 Mini Grease for Lead screw: amzn.to/3Ugpsna
Deburring tool: geni.us/9WGzv
Wire cutter: geni.us/NAwQIL
Heat gun: geni.us/Jdcu
📷📹 MY GEARS
Camera: geni.us/jXuAGP
Main Lens: geni.us/XWpHDt
2nd Lens: geni.us/2ttvj
Dummy battery: geni.us/kB8g8
SD card: geni.us/2aA2g58
Key light: geni.us/KsRwe0a
Practical lights: geni.us/8MCpRyB
Mic: geni.us/PdiZW
Pop Filter: geni.us/c13iV
Tripod: geni.us/by6BX
Disclaimer:
Amazon links: As an Amazon Associate, I earn from qualifying purchases. Every time you click on such an affiliate links and purchase from Amazon, I earn a small commission at no extra cost to you.
Some other links are affiliate links. Likewise, I earn a small commission at no extra cost to you.
🎵Music Credits:
"Spellbound" & “Too Cool” & "Highlight Reel" by Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 4.0 Licensecreativecommons...

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@JLLCookieCutterCo День назад

Looks good - I've been using 3dQue for my automation - works well, but you do need to wait for the hot bed to cool down before it knocks the prints off. This method seems like you'd be able to reduce down time and you can get a full beds worth. I lose about 5cm at the top using 3Dque so the hot end has enough space to get behind the print to knock it off.

@Lukis3D День назад

yeah it‘s exactly how you put it! Perhaps you can try it out and see if it works for you. Of course, u‘ll then need more space for your printers since it will increase the footprint of the A1 Mini, so keep that in mind as well!

@EmGi_ День назад

Thats really cool. Hope they will add support for other printers as well in the future

@Lukis3D День назад

oh yeah I was super skeptical about the system at first, but I ended up having too much fun with it. I‘m pretty sure they will develop the system for other printers as well! 🤞🏼🤞🏼

@drewgossage8842 День назад

Awesome video man, and very timely as well. Just signed up for notifications on their website, and said I seen it on your channel👍👍

@Lukis3D День назад

thanks man and I appreciate it! Are you interested to get the Kit?

@Redline09fa5 День назад

Did the same dope system. I got a P1S but this makes me wanna get a a1 mini when this kit comes out

@drewgossage8842 День назад

@@Lukis3D definitely will be mate. How seamless and polished is it!! It's almost like it should be an upgrade kit when you buy a A1 mini

@Lukis3D День назад

@@drewgossage8842 oh yeah and I could imagine that BambuLab would feature this as one of their Maker supply‘s upgrade kit 🤞🏼🤞🏼

@Splarkszter 22 часа назад

i did the same!

@Splarkszter 22 часа назад

HOLY THIS IS EXACTLY WHAT I NEED.

@Splarkszter 22 часа назад

Having one for the big A1 would be cool too.

@steelseeker 21 час назад

@@Splarkszter fr fr

@Lukis3D 19 часов назад

definitely! Im pretty sure they‘ll release one for the A1 in the future🤞🏼

@jamesgates1074 13 часов назад

I think if you are printing a lot of plates this way you need some kind of ramp with a deep box to hold the finished plates. If they stack up right Infront of the machine it could cause an ejection issue eventually. It's crazy how the slicing works. as far as the printer knows all the plates are one singular print. Neat trick but that may be an issue with increasingly long print swap sequences. I would think Bambu is aware of this mod and working on a first party version with compatible software because an auto ejecting printer is a great feature.

@mwinner101 День назад

That thing is sweet! 👍

@Lukis3D День назад

oh yeah it is!

@limbeboy7 11 часов назад

Just need one for the A1 and we good

@Lukis3D 5 часов назад

fingers crossed!🤞🏼🤞🏼

@pashalol7130 10 часов назад

Good color combo!

@Lukis3D 5 часов назад

thanks! It kinda grew on me haha

@hotfix7387 День назад

Really awesome video. What happens if you run out of plates (like it looks like happened on your last print)? Does the printer pause and wait, does it try to print on a non-existent plate, or something else?

@Lukis3D День назад

Thanks! and good question, i actually didnt try that out. My best guess is that it‘ll just print on the bed. (it will prep & calibrate before each print so it will think that the bed is the plate). But then again, A1 Mini also can detect if there‘s no plate on the bed. Maybe i‘ll try it out and see what happens!😆

@marcel2258 14 часов назад

@@Lukis3Dplease keep us updated

@svetlachok_max 21 час назад

wow!

@alijah1539 7 часов назад

Can you share if you know roughly when this will get released? Like are they on the last phase of testing so maybe by the end of the month-Novemberish? or are you thinking it won't be until next year? You did a good job showing it off

@Lukis3D 5 часов назад

I can‘t share the details yet, but according to the owner, pretty soon! So make sure you drop your email on their website to get notified as soon as its released. And thank you! Glad you liked the video😁

@bruno7573 7 часов назад

Franchement ! Je n'achèterai jamais un objet imprimé ou gravé ou découpé au laser pourquoi ? Parce que je peux le faire moi-même 😂😂😂 comme toutes les personnes sensées demain !

@Lukis3D 5 часов назад

to each their own😁

@TwinSummitDesigns День назад

Amazing! How long have you been working on designing this?

@Lukis3D День назад

the System was developed by Swap-Systems so i didn‘t design it. If you want to know more about it, make sure to check out their website!

@andrikurniawan531 День назад

dirimu tinggal dieropa kah bang?

@Orange_Sock6268 17 часов назад

Do you know if they have any plans to do it for the a1 or something different for the X1c?

@Lukis3D 17 часов назад

as far as I understood, they‘re not planning to develop the system for A1 or X1C (yet), but maybe in the future!

@ioandragulescu6063 19 часов назад

looks good until the end part where the plates are getting dumped on top of each other ...

@Lukis3D 18 часов назад

you could put the printer at the edge of the work platform and put a box beneath it, so the plates will just drop into the box

@JakJakku 32 минуты назад

Urge to buy just one more printer, just one!!

@Lukis3D 23 минуты назад

this kit will make a lot of people get an A1 Mini just for the automation💪🏼😄

@piccilos 9 часов назад

Does it know if it runs out of plates?

@Lukis3D 5 часов назад

it will just keep on reloading, there isnt plate auto-detection as far as the system concerns. The A1 mini itself though, has a no-plate auto detection feature, but i haven‘t tried printing without a plate yet. Maybe i‘ll try to test that!

@Andrews3D-Factory День назад

That’s cool do you want to colab and I would love to do that so I can have it for my business

@Lukis3D День назад

yeah it‘s a really cool product! You can reach out to the owner, I‘m sure you both can work something out!

@Andrews3D-Factory 8 часов назад

@@Lukis3D ok sadly it’s not out to the public yet

@theglowcloud2215 3 часа назад

Spend $700 on build plates so you can automate your $200 printer 🤪

@Lukis3D 2 часа назад

if you‘re a regular user you‘d probably have one or two additional plates, 3 is a sweet spot in my opinion😄 A1M Textured plate costs 20$ so 40$ in total. I know a ballpark price of the kit, and it‘s quite affordable (you can check out the discussion on the BambuLab forum).