Barrel Tensioner or Shroud??? Test in the FX Impact M3 700 mm Heavy liner 

Hey Peter. Awesome to see the barrel tensioner working as it should 😎 Great video as always 💪 Kind regards from Uggelhuse 😊

I expect a lounder sound in next video.. Very good video sir

Hi Peter; beautiful video like dab 😉👍✊

Regards from Czech. Rotate with bare barrel, twist it by 10 degree and shoot. It will make a circle than. Set it for 12 clock, find upper groupping. Than fixt it and complete barrel. This advice will push you in another limit of excatness...

Hi Peter , When I installed the carbon fiber sleeve on my 22 caliber I put a silicone grease between the barrel and the sleeve . My thoughts were to take up any slack between the two and act as a damper . That might reduce the noise you are hearing and may improve your groups . It’s worth a try to see the results .

When you tension the systeem with a certain tork number I takes some time before it is settled is my experience. After a while it is just a littel lower than first. I have a fx impact with a homemade system and 2 with the huma tension system. And for example my .35 shooting 68 grain fx hybrids shoots really smaller groups and when there is a high variation in speed the dispersion is mutch more high low than before. The the low speed shot could go higher and more to the site and the faster shot lower and to the other site. When testing difrent speeds the groups are mutch more on the same spot than before. I like it very mutch.

Hi Peter. Greetings from Portugal. With 700/800mm barrel i get good groupings with the shroud over the carbon fiber barrel. My mod is with the trs saber tactical rail with clamp only with the screws hand tight, and the shroud must have that conic part made with the carbon fiber OD. This mod works well with or without the trs sistem. The barrel became much rigid

Awesome video as usual 😎 now you need to put your shroud over your barrel tensioning system and you’ll have the final product!!!

I have a 700mm maverick that I purchased to be a dedicated slug gun. I was about to give up on the Maverick and slugs until Huma released their tensioning system. With a Fx 700-800mm barrel I now believe that a tensioner is essential. I went from 3" groups at 100 yards to sub moa with the right tune and slugs.

Hey buddy thanks for the video I have a question. So I was wondering if I bought the heavy slug liner to shoot slugs more accurately would I still get pretty decent accuracy from my JSB exact king pellets out of the heavy slug liner? I’ve got an m3 in 600mm. I mean obviously it’s not gonna give me the groups I’m getting with the stock liner but will it be good enough for hunting ?

Awesome video have you ever indexed your liner to see what is the most accurate thanks for sharing bsafe buddy 👍

tenho esse problema com a minha fx mkll sempre muda o ponto de impact

Det er godt at høre at jeg ikke er den eneste som kan blive forbandet og så kommer der lidt sjove ord ud af munden. God weekend ven.👍

I made a custom CF shroud to fit on top of the thinner CF shroud (bc I like the thicker looking barrel and it would have cut some noise as well) It was perfect EXCEPTTTT the air stripper inside my custom shroud grabbed the tension bolt too tightly and rather than just unscrewing itself from that tension bolt it unscrewed the tension bolt from the lock nut. So I had to destroy my CF shroud to get the tension bolt out of it.

Hello, for you what give the best benefit between the barrel tensioner vs the barrel tuner? Thanks for your time 😉

I wonder how the same projectiles would perform shot out of configuration 1 at the same speed as in configuration 2

By what means does the barrel tensioner cause the report of the rifle to become louder?

At first, I was thinking "OMG, I've bought this before watching this video", but then I realised I only bought it because I'd seen you using this set-up in later videos. I'm impressed, very. 500mm to 700mm, still STX Superior (not heavy), 13gr Zans better than 16gr, accept I'd have to go heavy for 16's. Shot count up from barrel increase, but just bought 700cc (just in case). Any tips on how to cope with accessory addiction, when there's none left? LOL

Grain 13.43?or 16 zan

Hello. Tell me 700 barrel, what kind of tivst does it have? I use google translate, if something is wrong, I'm sorry))

Qual a distância?

One time change the barrel polygon cal. 177 with a length of 60cm. How about the accuracy of the 100 meter distance, boss

Why you are using single shoot ??

Perplexed that the gun is louder with tensioner system.