Basher "124008 Heavy Duty Upgrade Parts" for Wltoys Buggies 124016 124017 124007 144001 144010 

Thanks 👍

You're welcome

You're welcome

Un français 🙂

Yes they are but expensive buying all the components

No, others parts are either the same or incompatible

Have not run in this set up since I have both cars. Yes, all fit. My 124017 is light weight high performance car and 124008 is just a basher

Not compatible at all. It would require modification

I haven't run it yet as I am waiting for the original to fail first. I do know the default spring rate is set too strong as if it's locked

It's for you to decide the trade off of the added weight and extra cost. I personally would go for it and reduce weight somewhere else like using carbon fiber parts. I make a video of my light weight Street Basher of 124017, check it out. Even hex nuts are carbon fiber 👍

PITA? The diff sizes are the same, I would think you can simply replace the cups. The sound is normal for metal gears. Hope this help

You can only replace the cups if the gears they are attached to allow it. The cups are the size of the 10428 or the 12402. All they did was change the part numbers, unless there is something different about them, and that's why I asked. @@customtoyrevolution

@@kodak_jack I don't have those to compare

In order to make the bigger ones fit you need to change the diff cups and wheel hubs.

So the diff cups fit the older diffs if you don't want to change the whole diff... I have upgraded to sealed metal diff cases

No parts of the chassis are compatible

@@customtoyrevolution ok, thank you very much 🙂

​@@customtoyrevolutionCould you one day take this car for a test drive and show us if it works better with all that?

In return for reliability, the car will be heavier and more stress on the electronics; you won't gain anything in terms of performance. The only upside is the slipper clutch where you can adjust to a point where you can obtain optimal launch/acceleration according to the road surface and your driving style@@dj_big_l2516

@@customtoyrevolution Thanks for your response 🙂 I don't plan to increase the power, because for its weight the car is powerful enough, for my personal opinion. On the other hand, I intend to improve its reliability. I'm looking for better shock absorbers, I wanted to mount the ones from the RLaarlo AM X12.

Yes, you can

@@customtoyrevolution Mr. Custom... Thank you for attending, my only support in answering has been you, thank you

(the slipper clutch I ordered comes with a pinion, so i guess its the same spacing on the new motor mount, even tho its a different tooth pitch)

Did the slipper clutch fit the 124008?

@@playboiflyer they claim it does, but I have to wait for it to arrive to test it myself

Not by itself, you will also need a 19T 0.7M Pinion

Slipper clutch is 0.7M while 124008 uses 0.6M Spur. I'd hope your seller knows what he's doing and send you the correct pinion

yes, part# in the description

Do they sell upgraded oil filled diffs for the 124008?

Depends, but in most cases, yes. Just remember the metal chassis versions have much better steering

Hi, means 07 is better in terms of car controlling, right? Just choosing between 07 and 08 models. From other reviews i unterstood they are almost same by steering

In theory, you can adjust the power distribution between front and rear and tailor to varies road conditions. But for most of us, mainly for preventing gear breakage and smoother start (save some rubbers)

Not by itself, you will also need a 19T 0.7M Pinion. Watch this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1mNARpL_QPA.html

Fair enough, thanks

Good question. Unfortunately, 124008 does not support anti rollbar at all, I need to add this comment to my initial review

Thank you

​@@customtoyrevolution do you mean that LC Racing L6134 sway bar doesn't fit? I can see chassis doesn't have the forward facing screws at the front to fasten it, but I was thinking it can somehow be fastened inside the new metal bumper

I am not sure, you will be cutting into the existing bumper mounting screws location. If use other location the sway bar might not move. I will have 2 different sets of sway bar coming next month, I'll take another look @@shadyhazza

@@customtoyrevolution cool. i notice the mounting screws for the metal bumper top and bottom actually go all the way thru and line up i've got some 35mm M2.5 bolts on order going to see if I can use 2 bolts with nuts instead of those 4 screws

Thanks. I already know how, just haven't have a chance to test it

​@@customtoyrevolutionHe really didn't believe that you know what you're doing lol

​@@TheSphonglefaceit's ok and it's a good comment as I didn't really talk about the slipper. Someone else could benefit from his suggestion

No, not directly. You will have to change bearings and pinion at the least

I will then go with a transmission with a 44t metal crown adapted to the 124007 (but difficult to find the exact part on Ali). They generally provide a 27t pinion with the part and I don't know why (also don't know if the metal crown supplied is 44t like the original one).... is what the shaft supplied is? compatible with the original 19t sprocket or is it obligatory to fit the 27t sprocket.... for the moment I don't know. Otherwise, I will mount the slipper clutch as shown in your video (looking forward to getting feedback on how it works while driving). in any case, thank you for your feedback and thank you for your very informative video!!! Have a good day

yes

The only source I know is Aliexpress. I am thinking of putting a kit together or sell parts individually on eBay

Tell me your expectation and then I could help

@@customtoyrevolution ihave rlaarlo amx12 but ihave problem in wheel wobble

If it's due to bent axles, 124008 will be a whole lot better. If you are talking about stock condition, both are the same@@loybots4624

@@customtoyrevolution can i use 124008 axle for amx12?

​@@loybots4624yes, same as everything in this video, I forgot to mention a new set of wheel nuts also needed

Try searching with this "124008 RC Car Spare Parts". I bought the whole car 124008 😊

me too

I assume you meant the internal gears, as long as they hold up, I am ok, it's a budget RC car after all. If they fail, do what I do, fuse them and make it a lock diff, it's better for bashing too

@@customtoyrevolution nope ring gear and pinion.

Haha isn't that the latest model? My 124017 have gone through several pinion and spur but never broken another part on these cars and I do not touch asphalt

​​@TheSphongleface It's a completely different series and design for different audience. Just happen to share some parts