BEFORE YOU GREASE YOUR SNOWBLOWER AUGERS, WATCH THIS!

Подписаться 93 тыс.

Просмотров 562 тыс.

50% 1

#snowblower #maintenance #garagegear
BEFORE YOU GREASE YOUR SNOWBLOWER AUGERS, WATCH THIS! Need to Grease your SNOWBLOWER AUGERS? Doing so will PREVENT CORROSION, Seizing and damage to your GEAR BOX. This is one of those SIMPLE PROCEDURES YOU MUST DO to help MAKE IT LAST. These are some QUICK and EASY steps that you can take with just about any snowblower to avoid mechanical issues and make it more EFFICIENT! LIKE & SUBSCRIBE!!!
CONTACT INFO:
garagegearjb@gmail.com
Instagram - garagegearjb
SUPPORT THE CHANNEL or help me take the GARAGE GAL out to dinner!
paypal.me/garagegear?country....
GARAGE GEAR AMAZON STORE
www.amazon.com/shop/garagegear
SNOWBLOWER SCHOOL - RUSTPROOFING COURSE OPTIONS:
1.Amazon Storefront:
See pinned list labeled - SNOWBLOWER SCHOOL RUSTPROOFING
www.amazon.com/shop/garagegea...
2.Etsy:
www.etsy.com/listing/15789027...
3.Email garagegearjb@gmail.com to purchase a PDF file of the Rustproofing Your Snowblower Course. An invoice will be sent to you via email. When you receive the invoice, you will be required to PayPal $9.99 to garagegearjb@gmail.com. Please include your email and name in the comments section. You will receive the PDF in your email within 24 hours after payment is received.
Thank you supporting Garage Gear!
Thank you for supporting the channel!
WATCH THESE NEXT:
HOW TO GREASE SNOWBLOWER AUGERS WITHOUT ZERKS • HOW TO GREASE SNOWBLOW...
WHAT TO DO WITH YOUR SNOWBLOWER AFTER YOU ARE DONE USING IT • WHAT TO DO WITH YOUR S...
HOW TO CLEAN A TROY BILT SQUALL 2100 SNOWBLOWER CARBURETOR • HOW TO CLEAN A TROY BI...
HOW TO CLEAN, SHINE AND PROTECT AN ARIENS SNOWBLOWER • HOW TO CLEAN, SHINE AN...
HOW TO CHANGE SNOWBLOWER OIL FOR BEGINNERS • HOW TO CHANGE SNOWBLOW...
HOW TO ADJUST A SNOWBLOWER AUGER BELT TO THROW FARTHER • HOW TO ADJUST A SNOWBL...
HOW TO CHANGE SNOWBLOWER AUGER BELTS - FAST & EASY Replacement and Installation • HOW TO CHANGE SNOWBLOW...
ARIENS DELUXE 24 VS TORO POWER MAX 824 - WHICH SNOWBLOWER IS BEST? • ARIENS DELUXE 24 VS TO...
BEFORE YOU BUY A 2 STAGE SNOWBLOWER, WATCH THIS! 3 THINGS TO CONSIDER • BEFORE YOU BUY A 2 STA...
PRODUCT LINKS:
Grease Gun amzn.to/3fMjUvI
Red & Tacky Grease Tube amzn.to/3nOULVP
Red & Tacky Grease Can amzn.to/3qQppjb
Marine Grease amzn.to/3nQD6gb
General Purpose Black/Gray Grease amzn.to/33YWyR4
Craftsman Screwdrivers amzn.to/3vj27T1
DeWalt Drill Driver Combo amzn.to/3fyvaew
Jack Stands amzn.to/3tYHY6K
Red Rolling Stool amzn.to/3fL10Wd
Shear Pins (Ensure fit prior to purchase) amzn.to/3GUTwMc
Ariens Snowblower Mat amzn.to/3CxhsmF
36" x 72" Snowblower Mat amzn.to/30E94nP
Ariens Deluxe 24" Snowblower amzn.to/3qT1Gzq
Ariens Compact 24" amzn.to/3qYrcDp
Ariens Deluxe 28" Snowblower amzn.to/3CMOKO1
Ariens Drift Cutters amzn.to/3sOeRCy
Armor Skids (Be sure to check size prior to purchase) amzn.to/3GVzrFA
JB and Garage Gear do not own the rights to the additional photos and clips used in this video.
Disclaimer:
Due to factors beyond the control of Garage Gear, I cannot guarantee against improper use or unauthorized modifications of this information. Garage Gear assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Garage Gear recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Garage Gear, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Garage Gear.
JB from Garage Gear is a member of the Amazon Affiliate Program and may receive a commissions on select purchases. These commissions do not influence the prices you pay on Amazon. Thank You for supporting Garage Gear!

Хобби

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 912

@GarageGear 2 года назад

Here is a link to the RED & TACKY GREASE I used in this video! amzn.to/3KRk7vX Thanks for watching everyone!

@brianmcintee6647 2 года назад

the red and tacky grease also comes in a spray can i use it all the time

@GarageGear 2 года назад

@@brianmcintee6647 thanks for sharing Brian!

@josephforgione1762 2 года назад

I just ordered red and tacky grease for my Machines.

@GarageGear 2 года назад

@@josephforgione1762 you won’t be disappointed!

@brianfeeney9493 Год назад

Super Tutorial 🎉

@goodcitizen 2 года назад

My MTD snowblower is 25 yrs old and I have never touched anything other than change the oil every couple years and air up the tires. I live in Michigan and it gets a good workout every winter. No stabil no spark plug replacement no nothing. Pump the bulb a few times and choke it and it usually starts on the first or second pull. Maybe it will last another 25 years if I keep neglecting it.....

@GarageGear 2 года назад

You my friend have a unicorn snowblower! Thanks for watching!

@jeffsond 2 года назад

Hmm… I have a MTD 2 stage 6hp thrower myself. I’ve had it for about 15 years now. I never did any Maintanance or anything other then change oil and air up tire just the same. Although I did run the fuel empty ea year before putting it away. I live in St. Louis so it only runs a few times a year normally. 2 years ago I pulled out the manual and was like… i was supposed to be doing that each year??? Hahahahaha. Im not joking when I say I fill it with fuel prime it 3 times and choke it for a second and within 1 or 2 pulls fires up. I’ve never replaced the spark plug or had to clean the carburetor. We found gems

@GarageGear 2 года назад

@@jeffsond awesome thanks for sharing! 👍

@mikehrdlicka8635 Год назад

Mtd's have plastic bushings no grease required

@tomdavis728 Год назад

I wonder how much snow your putting through it? We get feet here.

@joebarzo9935 Год назад

Just finished greasing the augers on my Ariens Snow blower getting in preparation for some nasty winter weather hitting this weekend. First time for me. And I had your video up the entire time. With such gratitude @Garage Gear for all that you provide and the manner in which you do it. Your friends are very blessed to have you in their lives.

@GarageGear Год назад

Awesome Joe! Your snowblower thanks you! Appreciate your kind words and positive feedback! 👍

@lsatenstein 2 года назад

Two weeks ago, before you posted the video I learned about grease nipples on the auger shaft. I went looking for a grease gun. All the local hardware and mechanics shops has pictures on the web showing the Cadillac gun at around $40.00 Every other GG was out of stock, and not expected soon or at all. All of Costco, Lowes, Home-Hardware and even automotive tool stores were out of stock. As far as reinstalling the shear pins, the rule is to tighten them until they just do not rotate in their socket(/hole. Not more than 1/4 turn on the nut when the spin is just binding.

@GarageGear 2 года назад

Thanks for sharing this Leslie! Your tips are appreciated!

@johndimech8945 2 года назад

Nice video. Maintenance is key to a machine that is stored for long periods. That zerk that allows grease to spew from the tip needs some easy fix attention. This is usually caused by a piece of grit getting between the tiny ball and the it's seat. Get a fine pointed awl or needle and push the ball in a few times. This usually dislodges the grit allowing the ball to seat again. If not successful, change out the zero. Oh, and wipe the zerk and the tip of your grease gun nozzle before greasing. Cheers

@GarageGear 2 года назад

Great tips John and Marie! Thanks you for sharing l!

@prhudy1854 2 года назад

@@GarageGear Yep, that zerk needs some attention

@GarageGear 2 года назад

@@prhudy1854 yeah I’ll be changing it out. 👍

@roseymalino9855 Год назад

@@GarageGear Usually you can clear it by just 'spinning' the ball; same as ratchets and extensions. After a while you'll get the hang of it.

@GarageGear Год назад

@@roseymalino9855 thanks for sharing!

@BorderlineOCD 2 года назад

I’m feeling the vibe 👍🏻 I found your channel trying to do my first maintenance + oil change on my snowblower. Excellent content. Informative and entertaining.

@GarageGear 2 года назад

Glad to have you as part of the tribe Borderline ocd! Plenty of snowblower content for you here! Thanks for your positive feedback!

@mtcman42 2 года назад

One word of caution about tightening your shear pins. Don't cinch them down tight. Make sure that the augers still turn freely, but not too loose. If you cinch them down tightly you will clamp the auger to the shaft and no amount of grease will let the auger "shear" the pin. Good luck.

@luptonpittman6520 2 года назад

I agree. I always leave a little bit of play so the sheer pin has about a 16th of an inch of play or so

@M.TTT. 2 года назад

I also agree. I always leave a small amount of play so the sheer pin has about 1/16" of play or so

@peterunderwood3447 2 года назад

Right. don't use that impact like he did. That's too tight. If it's a shear bolt, the lock nut should hold it, not the torque. If it's a shear pin, it may have a cotter pin or something to hold it loosely in place.

@swaggerjacker1482 Год назад

He also said you don’t have to sock it on there

@stevieray1828 Год назад

If it were me, I'd leave 1/16th of an inch travel.... Just me

@williamgibb5557 2 года назад

My older Craftsman has 2 augers per side. Each has has a shear pin and removing both allows them an inch of slide. By turning machine on side ,I am able to spray shaft to allow lube drain down while rotating augers. Several good sprays and then roll machine onto other side for same procedure. Also able to add grease to gearbox. I run machine several times each summer down my 250' driveway to work machine. Belts. Engine and tires. Maintenance is the answer.

@GarageGear 2 года назад

Great tips here William! Thanks for sharing!

@jerrysponagle3881 Год назад

thank you good tips. I own an older solid front axle 18 hp Ariens Garden tractor with a 42" Snow Blower attachment that is belt driven from tractor. this will be my first winter using it. I am greasing all the pulley bearings, and wasnt aware of your grease proceedure . when I watched it, it made good sense. I am also an Engineer , retired now. I subscribed to your channel, and if you can show some maintenance proceedures for the blower and mower attachments..would be nice and helpful. all around maintenance on tractors..etc thanks again. 💯👊😎

@GarageGear Год назад

I’ll see what I can do Jerry! Thanks for checking out the channel! 👍

@HewesNews 2 года назад

All stuff I wish I knew before my snowblower broke down on me yesterday. The last two storms have left wet snow, so lots of chute clearing. Yesterday's snow here in NJ gave us nearly 9 inches of dryer stuff. Still lots of chute clearing. It felt like the impeller was weakening. Then finally everything iced up and just stopped working. Don't let this happen to you, folks!

@GarageGear 2 года назад

Thanks for sharing this Hewes! You’re area got some serious snow! Thanks for watching!

@mtcman42 Год назад

If your impeller and chute are icing up, check out the impeller mod by Sixty-five Ford. There are several others too, and I've modified his design with a couple of my own, but basically it's the same. I can now hit the sidewalk on the other side of my residential street.

@scottsmith1525 8 месяцев назад

I just got a snowblower, used (new to me), that was neglected for quite some time. It's in better shape than I expected actually. I've been going through it here and there and just the other day noticed those zerks and wondered what they were for. thanks.

@GarageGear 8 месяцев назад

Now ya know! Thanks for watching Scott!

@dankotanko6896 2 года назад

Thanks for all the videos and great maintenance advice!

@GarageGear 2 года назад

You got it Dan! Thanks for being a cool fan of the channel! 👍

@henrilecours1180 Год назад

Thank you,.... loud, clear and precise good job coach

@GarageGear Год назад

You got it henri! Thanks for watching!

@SDavidC55 Год назад

Great video but it is not OK if the grease comes back out of the zerks. There is a small ball valve and spring in a zerk designed to allow the grease to flow in under pressure but not out. If the grease flows back out, the small ball valve has corroded and/or the internal spring has broken. If grease backflows out of any zerk just remove them and replace with new ones. You want the grease to flow in via the zerk and come out of the tubes, bearings, king pins, as the case may be but not back out of the zerk. Hope this helps.

@GarageGear Год назад

Don’t worry. I already fixed it. Thanks for watching!

@biggetl1319 2 года назад

The ball check is bad on that zerk! That's why grease is coming back through.

@GarageGear 2 года назад

Thanks for sharing usually once you fill them a little comes out and then it stops. Easy to replace those. 👍

@wickedwolverine350 2 года назад

There is no check ball on those zerks. They are not designed to seal on this application, so they are working as intended.

@GarageGear 2 года назад

@@wickedwolverine350 good to know! Thanks for sharing!

@cowshottv5867 Год назад

Truth

@cowshottv5867 Год назад

Also, put some grease on the shear pins to keep them from seizing in the shaft

@RSole9999 Год назад

Removing the shear bolts gives the grease a path of least resistance and it just comes out the holes. I loosen the shear bolts, pump in grease, wait a few seconds for the grease to flow down the shafts, then remove the shear bolts and spin the augers, re-install the bolts loosely and repeat the process. An even better method is to remove the bolts, put a hose clamp over the bolts holes to block them so that you can pump grease, spin, pump, spin, and none comes out the shear pin bolt holes. This second method, other than dismantling the augers, is the best way to ensure grease gets to the outer ends.

@GarageGear Год назад

Thanks for sharing sole!

@edwintaber6465 2 года назад

During operation the auger spins with the shaft not on it. For that the lubrication and condition of the bearings/bushings and gear box is critical. The shear pins connect the auger to the shaft. If you do not lubricate and the auger rusts onto the shaft that eliminates the safety of the shear pins . Then if you strike something hard with the auger instead of the force being isolated from the gear box by the shear pins breaking the force is transmitted into the gear box usually damaging it. You must lubricate so that the calculated shear force for the pins is maintained. That calculation is compromised by even a slightly seized auger. You can inadvertently seize the auger to the shaft by over- tightening the shear pins.

@GarageGear 2 года назад

Thanks for sharing Edwin!

@PleakTCG 2 года назад

As a new home owner as well as the Ariens 24" Deluxe i'm learning a sh^t load on being able to DIY things the proper way. This video will definitely be stored in the back of my head. Looking forward to watching more of your content!

@GarageGear 2 года назад

Awesome Freakahleak! Thanks for being a cool fan! 👍

@williamb3323 Год назад

Dude I love you, No grease on the nozzle of the grease gun, Not a single blemish on the snowblower shroud or chute all tools look like you just unpacked them. Bench looks like the varnish just dried. You're my garage super hero!

@GarageGear Год назад

Hahaha William! I work hard to keep things clean! I don’t like to look like a slob on video! Many tools get cleaned as I use them. That’s just my ocd! Thanks for being a cool fan. 👍

@OdinsCloud 8 месяцев назад

@@GarageGear I am the same and take flak for it all the time.

@MrNunna Год назад

I just worked on a JD and the shaft was seized/rusted enough to eat up the brass gear in the gear box. The shaft was SO siezed with rust, I couldn't get the auger off of the shaft. Since this was a "free-bee" repair, I gave it back to him to do what he liked with it. He sold it as a fixer upper machine.

@GarageGear Год назад

Thanks for sharing!

@diverbob33 Год назад

Wanted to say thanks for a great instructional video that is clear and to the point! I just got done doing this while enjoying what could be the last 45 degree F day we have left in da UP of MI. Had some lithium grease left from a few years ago so I used that, and both augers really needed some attention. Following your procedure, they were spinning much more freely at the end. BTW, my local hardware store only had Red & Tacky grease in the spray can version but I will get my hands on some of this stuff for my grease gun to be sure. Thanks again man!

@GarageGear Год назад

Awesome Bob! Your snowblower thanks you! You’ll be set for a while! Thanks for watching! 👍

@w0ls0n 2 года назад

Great knowledge here! I have had my snowblower for about 3-4 years and have never done this. Guess I know what else I'm doing this fall.

@GarageGear 2 года назад

Have at it William! Have fun! Thanks for watching!

@brianperkins6121 2 года назад

Auger position when you put the shear bolts back does matter , (some people call it auger phasing) the Auger's feed snow to the central impeller you want the inside ends of the auger on both sides to not line up with each other so that each side feeds snow to the impeller in an alternating manor.

@GarageGear 2 года назад

Thanks for sharing!

@GNX157 Год назад

It’s hard to tell, but I think he’s got the augers out of phase now. Definitely deserves a recheck and correction video though.

@GeneralChangFromDanang Год назад

Ahh, maybe that's why mine keeps clogging up. Thanks for the tip.

@zahedaminullah6934 2 года назад

Great vid! Well explained

@GarageGear 2 года назад

You Rock Zahed! 👍

@abominablesnowboarderx6481 6 месяцев назад

This guy's snowblower is never going to break I swear

@GarageGear 6 месяцев назад

She’s well cared for lol! Thanks for watching

@josephforgione1762 2 года назад

Great idea. Thanks for the “how to” video. Considering the average price for a two-stage snowblower is around $1200, periodic preventative maintenance is critical to prolonging the life of your equipment. I’m looking forward to watching many more of your videos. Have a great day from Northern Vermont from a former Western New Yorker.

@GarageGear 2 года назад

Hahaha awesome my friend! Period maintenance is key! So the big question is… do you root for the bills or New England?

@josephforgione1762 2 года назад

@@GarageGear the Bills.

@josephforgione1762 2 года назад

@@GarageGear Never liked the Patriots. Bills had a disappointing end to an otherwise great season.

@lsatenstein 2 года назад

Your $1200 machine in Montreal was $1900 plus 15% sales taxes. It is not a joke.

@josephforgione1762 2 года назад

@@lsatenstein that’s just awful with the exorbitant price tag and the amount of taxes you folks have to pay.

@slange 2 года назад

All your tips from previous videos worked out. My snowblower ran like a champ this weekend. Thank you!!

@GarageGear 2 года назад

Awesome slang!!! I’m excited to hear that it worked like a charm for you! Plenty more content coming on these! Stay tuned!

@vixena7321 Год назад

Just for ppl who dont know, if your zerk leaks like that you can replace it super easily. Just a socket and it comes right out. Screw in the new one and your done. Pennies. Also, do yourself a favor and get the locknlube connector for the end of your grease gun. Its a life saver.

@GarageGear Год назад

Thanks for sharing Vix!

@GNX157 Год назад

I didn’t see it noted, but on his version of Ariens, it uses the newer design cast iron gearbox, and that uses stub shaft auger driveshafts. They only extend out of the gearbox a few inches, and that’s why there is only one zerk fitting on each side. The rest is hollow until out near the end where the outer supports are. On older Ariens (aluminum gearcase) and maybe other brands, the shaft is full length out to the end, and has two zerk fittings per side. It is this older model where greasing is even more important, as the whole shaft is susceptible to rust and seizing, as well as the aluminum gearcase design being weaker. On the older Aluminum gearcase, it is also important to check and top off the case lube using a good synthetic every season start , or it will fail. I park mine in the same spot and watch for any seepage during the season. This older gearcase has also been superseded by an updated part that has a cast iron case, should the original need replacing.

@GarageGear Год назад

Lots of good tips here! Thanks for sharing!

@Christian-cp9hb Год назад

It is very important to grease this auger shaft as well as removing the wheels off their shaft and grease as well. If you ever need to remove these parts for replacement and have never greased them they will have rusted in place. Also the same thing goes for your rototiller tine assembly and wheels.

@GarageGear Год назад

Thanks for sharing

@OdinsCloud 8 месяцев назад

Especially on Pin drives that you may want to adjust from one two two wheel drive.

@almolloy5817 2 года назад

The process is more effective if you leave the shear pins in for the first greasing until you see grease coming out the outer ends, then remove them. Less lube out the shear pin holes = more grease down the length of the auger shafts.

@GarageGear 2 года назад

Thanks for watching!

@michaelvachon1334 Год назад

Very thorough!

@GarageGear Год назад

Thanks for the positive feedback Michael !

@Alaska610ish Год назад

That’s was awesome! Thank you, I never knew about this. Glad you popped up!

@GarageGear Год назад

Thanks for watching Tom!

@m.g.540 2 года назад

My 1965 Ariens get greased twice or more a season, it makes them last, listen to Garage Gear!

@GarageGear 2 года назад

Thanks a lot MG! Appreciate it bud! 👍

@billarenz2719 Год назад

Great video on snowblower maintenance, never considered spinning the augers like that after greasing them.!

@GarageGear Год назад

Hey Bill! That really helps work it around! Thanks for watching!

@flyingbeaver57 Год назад

I'm running a 1974 Ariens 2-stage machine, bought new in '74 and run every year since then. It originally had a 6HP motor but now on a N.O.S. Tecumseh engine, 7.5 HP. - a crate motor that came with an electric starter. What I was missing for 35 years! Anyway, living as I do in northern Canada, I wanted to mention that there is grease available rated "Arctic." They make it here in Alberta - I'm not sure of the chemistry, but I use it in all machinery during the winter months. Why? Well, because during the worst of the winter, normal "red" grease is about as stiff as asphalt on a summer afternoon - i.e. not very. My '74 Ariens is still running just fine. I did replace the two friction-drive discs in the wheel drive transmission, but after 35 years? Still available. I pulled everything apart, cleaned, repaired or replaced as needed (not much needed). A fresh coat of Ariens Orange, and it'll probably run for a good many more years. Maintenance is the key, and the manual that came with the machine is thorough and clear about all of it. That's a nice change from the "modern" equipment.

@GarageGear Год назад

Thanks for sharing beaver!

@smithn.wesson495 Год назад

I use Mobil One Synthetic grease and oil on my 2012 Ariens for the same reasons you mentioned. The Mobil One Synthetic grease and oil will never get stiff or sticky, even when the temp is -25 F to -30 F below, the auger and wheel axles spin freely like it's the middle of summer.

@GarageGear Год назад

@@smithn.wesson495 thanks for sharing!

@Halenrocks5150 Год назад

Dude! Absolutely love your enthusiasm, humor and very easy to follow video! I was able to do this job with no problem. Thank you and God bless!

@GarageGear Год назад

AWESOME Halen! Appreciate the positive feedback my friend! Good to know there are people out there that get my humor. Lol! Thanks for watching!

@richfrommontreald.3869 2 года назад

Thank you very much my friend Im not a mechanic guy And you helping me a lot I appreciated Richard from Montreal 👍

@GarageGear 2 года назад

ROCK ON Richard! Thanks for being a cool fan!

@traceymcelrea9631 Год назад

Since the auger spins with the shaft and not on the shaft, why the excessive grease like it's spinning on the shaft? To then demonstrate smooth operation after the greasing when the greasing had nothing to do with smooth operation was pretty funny. I can see how greasing would make disassembly easier and shear pin shearing but even having to disassemble is only a remote possibility and we need not be so excessive with the grease. I am only objecting to the idea that greasing the shaft itself under the augers contributes to a smoother operating snowblower. I am a big fan, this surprised me and I think being clearly accurate would be the better choice. Not meant to offend anyone. Excellent channel, thanks for your help.

@GarageGear Год назад

Hey Tracey! The augers are meant to spin freely once the shear pins break if something were to get stuck. This prevents damage to your gearbox. If the augers were seized to the shaft you risk damage to your gearbox. Grease prevents them from sticking. Thanks for watching.👍

@stevemlejnek7073 7 месяцев назад

I picked up a used in great condition Murray 8/27 2 stage. I have been taking care of it, and I think it's a great machine. The augers are pretty well seized though. One spins with great effort. The other does not. I'm hoping with grease these may eventually loosen up. Until then, I'm hoping to not hit anything. I've been adding 00 grease to the gear box.

@GarageGear 7 месяцев назад

Sounds like a good plan! Let me know if you free them up!

@northerntranquility1614 2 года назад

Great video didn't know my snowblower had grease on the augers better get to it thanks for sharing Dale

@GarageGear 2 года назад

You got it Dale! Thanks for watching bud!

@Twag-yh8xc Год назад

Nicely done video, short and complete. A couple comments: The shear pins keep the auger from rotating relative to the shaft. There should not be any wear between the auger sleeve and the shaft. So why is grease needed? Maybe just to keep water out? If grease is coming out of the zerk, that doesn't mean it's full, that means the check ball in your zerk is faulty. New zerks are cheap and easy to install.

@GarageGear Год назад

Hey user! The grease prevents the augers from seizing to the shaft! If you hit something the shear pin will break the auger free from the shaft allowing it to spin freely and preventing harm to your gearbox . Thanks for watching!

@DoneWaiting Год назад

I had the same thought. If it wasn't something you should do they definitely wouldn't add zerk fittings. I've never had anyone say my auger always spins whether or not i have a shear pin, but I see how it could bang the gearbox if it did get stuck. Any videos on the gearbox? That's the actual piece that always fails.

@GarageGear Год назад

Grease prevents the augers from seizing to the auger shaft. If you hit something hard. You want the shear pins to break and the augers to spin freely. If they are stuck to the auger shaft you risk harm to your gearbox. Thanks for sharing and watching

@GarageGear Год назад

@@DoneWaiting I’ll be doing a gearbox video soon.

@felix.8891 2 года назад

Thank you I think you’re one of the best with the information you provide. I have taken your advice.

@GarageGear 2 года назад

ROCK ON Felix! Thanks for being a cool fan of the channel! 👍

@johnnywishbone932 2 года назад

Thanks! I learned something new today ☺️

@GarageGear 2 года назад

Knowledge is power my friend! Thanks for watching!

@csimet 2 года назад

All add to your excellent how-to... if you have the ability to do so, remove the gearbox cover (between the augers) and inspect that too. Sometimes applying grease to the augers does not make its way into the gearbox and there may be a o-rings involved keeping it from doing so.

@GarageGear 2 года назад

The gearbox is coming up soon! Thanks for suggesting it though! Thanks for watching csimet! 👍

@mtcman42 2 года назад

I don't believe that there is any direct path from the augers to the gear box, so over greasing one or the other will not help.

@GarageGear 2 года назад

@@mtcman42 thanks for sharing mtc!

@RSole9999 Год назад

The gearbox uses heavy weight gear oil, not grease.

@starview7045 2 года назад

Great info as usual. What happens if there is no grease fitting, just the shear pins. Any guidance ?

@GarageGear 2 года назад

You could try spraying fluid film into the shear pin holes and giving it a few spins. This would prevent any rusting/seizing! Thanks for watching star view!

@37yearsofanythingisenough39 Год назад

You can add zerks. Remove the augers from the shaft. They are hollow tubes. Go to an auto parts store and get the shortest threaded zerks they sell. Also get a tap that matches the thread pitch of the zerks. (Know what you are buying. Some zerks have straight threads, and some have pipe threads which are tapered) Get a drill that is the proper tap drill for the tap. Drill then tap the holes in the augers (you may have to file a small flat for the drill point to purchase on or at the very least heavily center punch the location where you want the zerk. You are drilling on a radius and the drill will wander like no tomorrow if you don’t do this), reassemble the augers on their shaft, spin them and make sure the threaded end of the zerk is not binding the shaft (if the augers slide on the shaft easily you should be ok. You just want the augers to be able to shear the pins/bolts in the event of a stoppage. A heavily binding zerk would prevent this from happening.) Grease ‘‘em up and you should be good to go for your lifetime and another. FOR GODS SAKE NEVER PUT GASOLINE CONTAINING ETHANOL IN AN ENGINE THAT IS RUN INFREQUENTLY.

@starview7045 Год назад

@@37yearsofanythingisenough39 thanks

@cwsosby 2 года назад

Good info. Never thought about removing the shear pins and rotating the augers. Thanks

@GarageGear 2 года назад

Yep gets grease way in there! Thanks for watching Fire!

@whiskyjames4200 2 года назад

Great advice man!

@GarageGear 2 года назад

Thanks for the positive feedback James! I appreciate it!

@slange 2 года назад

Great video. Hopefully all your maintenance tips work out in todays snow storm. Realized last night right tire wasn’t holding air. Gotta handle that first!

@GarageGear 2 года назад

Thanks Slang! Good luck with your storm and your tire! You just gave me an idea for a future video! 👍

@chrisssmallengines7163 2 года назад

You do as good a job as I do , in my books that's good . But I would also grease the gearbox as well .Great video .

@GarageGear 2 года назад

Hey Chris, that will be a separate video down the road. This video was just about the auger shafts. Nonetheless still important to do that too! Thanks for watching my friend!

@l337pwnage 2 года назад

Those newer machines just have little stub shafts, unless you get the commercial version, so they don't need as much grease. Mine's getting older so I'm thinking of adding zirks to all the bushings, as the factory grease has got to be pretty well gone by now. I miss my even older ones as that were made when they still used ball bearings.

@GarageGear 2 года назад

Adding zerks is not a bad idea! Thanks for being a cool fan pwnage!

@cwinegarden6426 Год назад

Thanks!

@GarageGear Год назад

Thanks for watching

@tomvarano3283 2 года назад

Great video. I did not know or think about spinning the auger backwards. Awesome tip. I also like the grease gun in a tote. Didn’t think of that one also. Take care.

@GarageGear 2 года назад

Hey Tom! I’ve had that grease gun forever. It always seems to leak a little no matter what I do. So it stays in a tote to avoid any issues. Thanks for watching and glad to hear you picked up something new!

@tomvarano3283 2 года назад

I have the same one and it also leaks just enough to make a mess in the drawer. I wager a tote. What happens is I use it clean it up put it away and forget about it. Then when I use it. Gain, dag nabbit I have a slight layer of grease on everything. Than in s again

@GarageGear 2 года назад

@@tomvarano3283 after I redid the garage I decided to tote it! Saves the mess

@cliffjohnson2273 2 года назад

How do you fix the first gear speed, cutting it in half. How do you fix the problem of front of the blower climbing. How do you fix the difficulty of the not scraping the packed snow off the sidewalk, needing a shovel to loosen it?

@GarageGear 2 года назад

I think you need to add some weight to the top of your auger housing to help it press itself down.

@darrenlind3088 Год назад

Thanks 🙏🏿 this is helping me a lot

@GarageGear Год назад

Rock on Darren! Thanks for watching

@deanguando1335 2 года назад

Very helpful video.

@GarageGear 2 года назад

Thanks for watching Dean!

@patrickrivard4030 2 года назад

Isn't greasing the auger shaft a bit pointless? The auger is fixed to the shaft with the shear pin. Only time that the auger spins on the shaft is when the shear pin or bolt breaks. The shaft runs on the bearings on the ends. Wouldn't servicing the gear case oil and the bearings at the end of the shaft make more sense? I'm all about preventative maintenance that actually does something of benefit.

@GarageGear 2 года назад

That’s a good question. If you break a shear pin you want the auger to spin freely. If it’s seized to the shaft you could damage your gear box if you hit something. Thanks for watching!

@jaxturner7288 2 года назад

Lol. Do you want your shear pins to be able to function and save your more expensive components? Or do you want your shear pins to be pointless and provide no protection?

@GarageGear 2 года назад

@@jaxturner7288 the grease zerks are put there for a reason. Best to grease them!

@gzmz1993 2 года назад

@@GarageGear My auger has no grease zerks

@GarageGear 2 года назад

@@gzmz1993 some models may not have them. You could use fluid film with a spray straw and stick it in the shear pin holes between the shaft and auger tube to lubricate it!

@sonicboomin 2 года назад

You should do a video on adding and checking the grease or oil in the gearbox.

@GarageGear 2 года назад

Got that one planned for down the road! Thanks for suggesting it though! 👍 thanks for watching savage!

@tomd1532 Год назад

LOVE YOUR VIDEOS! So very complete and sooo ENTERTAINING...... Seriously, you cover everything and appreciate your suggestions for name brand products. CAN'T WAIT UNTIL YOU START MAKING VIDEOS ON CAR, REPAIR AND MAINTENANCE!! Excellent job, Thank you.

@GarageGear Год назад

Appreciate you Tom! Thanks for being a cool fan!

@JWLamey 8 месяцев назад

I like your videos. That's don't move too slow, that's for sure. I learn something with each one. One caution I noticed - watch out using chrome sockets with an impact driver. They are soft and and can get stuck on an impact driver. Use impact driver rated sockets instead.

@GarageGear 8 месяцев назад

Thanks for the feedback and tip!

@goaheadmakeourdayscooterpe9644 2 года назад

Actually drilled and tapped for grease fittings the end housing bushing covers, my two are 20 and 25+years old so I guess it helped along with the Mobil 1 oil changes.

@GarageGear 2 года назад

Good thinking my friend! I like where your head is at! 👍

@byronwoolfrey1039 2 года назад

Now that would be a video that teaches something.

@GarageGear 2 года назад

@@byronwoolfrey1039 could be one down the road!

@mythoughts.....4787 2 года назад

Very much .... Please do !!! @@GarageGear

@williamtolli1450 2 года назад

also show how to remove the wheels and anti seize the axles if you get a flat tire you'll be glad you did

@GarageGear 2 года назад

Good idea! I I did do this in my video titled, “SUMMERIZE your snowblower” but I suppose a stand along video would be worth doing! Thanks for watching!

@Hot80s Год назад

I’m enjoying your videos. You’re like the duff man of snowblower maintenance!

@GarageGear Год назад

I try my friend! Thanks for being a cool fan of the channel!

@edrumsas5420 2 года назад

Great info. Never knew how easy this is. Thanks!!

@GarageGear 2 года назад

Pretty straightforward! Grease it until there’s grease coming out everywhere, spin, repeat! Lol thanks for watching as always Ed!

@markjpozorski9703 2 года назад

Is it INTENSIONAL that you position the augers in OPPOSITE POSITIONS before inserting shear pins? Does it matter?

@GarageGear 2 года назад

Good question. I don’t think it really matters. They’re really just gonna mash up all the snow anyways. If you want to line them up you can. Thanks for watching!

@orviskid 2 года назад

Why grease that shaft, the auger doesn’t rotate around the shaft they all rotate together because of the shear pins.

@GarageGear 2 года назад

Good point but why does it come with grease fittings? Got to keep those shafts lubricated so the augers don’t seize. Thanks for watching!

@luptonpittman6520 2 года назад

It’s designed to rotate around the shaft when the sheer pin breaks. If the auger is fused to the shaft, you’ll be doing some damage when that shear pin breaks

@GarageGear 2 года назад

@@luptonpittman6520 thanks for sharing Lupton!

@thomasrapp618 8 месяцев назад

I just picked up an ariens snowblower, I'm addicted to your videos now. 😂

@GarageGear 8 месяцев назад

ROCK ON Thomas! 👍👍

@philiprea8340 Год назад

Nice! Thanks

@GarageGear Год назад

Thanks for watching

@Coffeeology 9 месяцев назад

Hey dude! I'm fixing to have my 1st winter in Western NY where I'll be the one dealing with the snow. I had not idea how to do any maintenance on a snow blower. Thank you for this!

@GarageGear 9 месяцев назад

You got it my friend! Plenty here to help you maintain your machine! Welcome to the tribe! Go Bills!

@markfurchtenicht8274 2 года назад

Nice demonstration. Thank you for that👍

@GarageGear 2 года назад

Thanks for checking out the channel, Mark. You got it!

@MRNOBODY023 2 года назад

I added 2 more grease fittings on mine. also important to do the wheels,

@GarageGear 2 года назад

Good thinking! I like where your head it at! 👍👍👍

@adriantomlin2902 2 года назад

Excellent tips and info sir. Thanks.

@GarageGear 2 года назад

You got it bud!👍

@RETSAMTV34 Год назад

winter almost done here in southeast SK 🍁, thank you so much for sharing these tips! keep spreading the vibe!

@GarageGear Год назад

We got about 2 months to go here Rets! Will do my friend! Thanks for being a cool fan!

@rmar7081 Год назад

Awesome video!! Thank you.

@GarageGear Год назад

You got it R! Thanks for watching!

@upsidedown9823 2 года назад

great video! 👍

@GarageGear 2 года назад

Thanks for the positive feedback upside down! 👍👍👍

@lsatenstein 2 года назад

Today on youtube, another presentation appeared in my "home" setting. It was about another snowblower treating his blower to make it more durable and performing. In lieu of silicon spray, he is using PAM. the baking spray. Does the pam do the job at lower cost? Another thing he has done is to order a ceramic coating product to coat the bucket, auger, and chute area. It is a wipe-on, wipe-off. The analogy is the rain or other that lands on the car hood, and just rolls off. He spent about $20 for this coating, and seemed to be satisfied that it works. Pam is of interest to me. I can also use it on the frypan when I make eggs. Regards

@mtcman42 2 года назад

I went with the ceramic spray and am happy with it. I did two coats about a day apart and so far it's working quite well. Pam tends to come off fairly quickly.

@GarageGear 2 года назад

Thanks for sharing this info as always Leslie!

@GarageGear 2 года назад

Thanks for letting us know the difference! Appreciate it! 👍

@davebennett8239 2 года назад

Dude .. are you in New England ?!?!? I'd LOVE to buy you a beer, drink, coffee!!! My 7yr old Ariens Deluxe 28 ("Edward" .. long story) began struggling with light snow month or so ago, so of course i searched the interwebs ...found this video and the other about adjusting the tension on the belts (also from you) and bought the necessary suggested items you shared links to ..did the work last night (hours ahead of a huge storm) and ....... im just coming from a few hours of snow blowing some heavy f'in snow. Not only did i not have to clear the chute once, Edward worked through it all without a single issue and throwing further than it has in years !!! Thank you isnt enough ... but for now, that whats i got ..............

@GarageGear 2 года назад

Hey Dave! Hahaha ROCK ON my friend! Glad to hear that you found my videos helpful! Sounds like you gave some new life to your machine. Little adjustments here and there can go a long way! Thanks for being a cool fan of the channel! 👍

@aresathena2007 2 года назад

I had your video show up in my recommendations. So while I’m watching your very informative and engaging video my wife’s mind is obviously rolling in filth. She’s snort/laughing and she’s blushing. I’ve gotta rewatch this without the laugh track. Thanks for the information and keep up the good work.

@GarageGear 2 года назад

Haha give it another watch aresathena! Lol thanks for the positive feedback! 👍

@jamesbowie2703 Год назад

thanks for that great idea!

@GarageGear Год назад

You got it James! Thanks for watching!

@alanlevine3984 Год назад

Thanks JB

@GarageGear Год назад

You got it man!

@basicbreakfast Год назад

Thx cousin!

@GarageGear Год назад

You got it!

@NYSESTRA 2 года назад

Holy moly you’re terrific we just subscribed. Your videos are clear and concise with a bit of humor mixed in…love it. Im hoping come tuneup time your videos will help us maintain our Ariens snowblower.

@GarageGear 2 года назад

Hey AP! Thanks for subscribing! Plenty of content on here to give you a hand! Thanks for watching!

@davidmccurley4306 Год назад

When 70's AM radio comes back I found the voice for it ...

@GarageGear Год назад

Thanks for watching

@stephenrickjr.7519 8 месяцев назад

Your videos are very much appreciated, thanks 😎😊👌👍!

@GarageGear 8 месяцев назад

Thanks for being a cool fan Stephen! 👍

@robertharmon7156 Год назад

thank you, Dufffman, found your information helpful

@GarageGear Год назад

Awesome Robert! Thanks for watching 👍

@guntherpetutschnig2705 2 года назад

Good work

@GarageGear 2 года назад

Thanks for watching!

@wholespeed 2 года назад

Great video! Always wondered what the guy looked like who does the voice for the monster truck promotional commercials. Very cool!

@GarageGear 2 года назад

Hahahahaha yep ya caught me lol! Thanks for watching!

@michaelquigley1411 Год назад

You're the most likable snowblower maniac I've seen yet. I'm in.

@GarageGear Год назад

Hahaha glad you’re a fan of the channel Michael! Thanks for watching!

@hectormedina7198 2 года назад

Nice!

@GarageGear 2 года назад

Thanks for watching another video Hector!

@jeffmilroy9345 Год назад

I have MTD one auger is seized and pb blaster aint getting it. Also zerk fittings are long since gone since tube is so thin (not enough material for zerk threads). Has anyone done an aftermarket video on welding on decent size zerk fitting collar over existing hole in tube? I guess I could operate without the shear pin in the seized auger - same break loose force? Does not matter anyway - if the auger jams and the steel worm gear eats the brass drive gear - then its recycle time anyway. (the brass drive gear, packing grease, and gasket is not that expensive but the auger would still be seized and labor is way too much). Bottom line is its way worth it to lube the augers.

@GarageGear Год назад

Thanks for sharing this Jeff!

@avellinopropertiesllc2429 7 месяцев назад

Such helpful info. Thank you so much JB!!

@GarageGear 7 месяцев назад

You got it👍

@jimstraightshooter163 2 года назад

Never knew about this and I've lived in snow country my whole life. 100+ inches per year. Thanks

@GarageGear 2 года назад

Now ya know Jim! Have fun greasing them! Thanks for watching!

@tomfields3682 Год назад

WNY?

@jasonredepenning Год назад

I always do this ten times each side and never in two years have I has a problem

@GarageGear Год назад

Thanks for sharing Jason!

@ruchirsajwan Год назад

I don’t even own a snow blower and watching these maintenance tips compels me to buy one 😂

@GarageGear Год назад

Haha they are fun to work on! Thanks for watching Ruchir!

@thomassiembor3507 Год назад

Thanks for the upbeat directions. Have an old Sears Noma that refuses to die. Like to keep it trim. Big thumbs up.

@GarageGear Год назад

Appreciate the positive feedback Thomas! Old machines can be the best machines! Thanks for watching.

@manjumehra4292 Год назад

Excellent information very well explained thank you very much for sharing

@GarageGear Год назад

You got it manju! Thanks for watching!

@OdinsCloud 8 месяцев назад

Hmmm. Just one grease Zerk per auger shaft.? Even my old compact 8526 LE has two per shaft. That 20 year old unit still runs like new starts one pull and is fitted with a Tecumseh that starts with one pull or a quick push of the electric starter. Had to upgrade the Hex shaft etc with Arien's recall, since then no issues. And it looks new. Now i inherited a virtually unused Pro 28 with a Briggs 420cc. I think / hope that has two zerks also on each side as this provides for better and easier distribution of grease. I have always used Redline CV-2, Castrol edge 0/30, CRC heavy duty marine corrosion inhibitor, M1 Lube, L3 oil, silicone and went to town. After 20 years nearly zero rust. I will now do the same to the Pro 28. I look forward to the differential the most with the new machine.

@GarageGear 8 месяцев назад

Thanks for sharing

@naedathoms3311 8 месяцев назад

Great video. I have never done that but will start now. Thanks. One tip i will add is that snowblower manufacturers recommend ear protection when running the machine. Helps reduce the chance of healing loss and hearing aid purchases in old age.

@GarageGear 8 месяцев назад

Thanks for sharing my friend