Beginner Guide to 3D Printing! Creality Ender 5 S1 & Sonic Pad

Подписаться 111 тыс.

Просмотров 12 тыс.

50% 1

Go to my sponsor aura.com/rcgirl to get a 14 day free trial and see if your personal information has been leaked online.
ABOUT THE VIDEO
Have you been wanting to learn how to 3D print? Me too! In this video, I learned to print for the very first time with the Creality Ender 5 S1. I share what I've learned, including an overview of the workflow, my full setup with the Ender 5 S1 and Sonic Pad, anatomy of a 3d printer, the basics of printer calibration, some key do's and don'ts (from a beginner's perspective!), and print some really cool objects.
I was inspired by a 1:10 scale adventure trailer from Thingiverse - which was 36 individual files! I was able to successfully print it all my first week with the printer and think it's a great choice for someone looking to grow in the 3D printing hobby.
IN THIS VIDEO
Creality Ender 5 S1 Printer -
Web: shrsl.com/44m51
Amazon: amzn.to/3JA4CK2
Creality Sonic Pad -
Web: shrsl.com/44nh6
Amazon: amzn.to/3JyY91I
Matte Black PLA: shrsl.com/44nh8
Gray PLA: amzn.to/46r1lpU
Clear PLA: amzn.to/4411mPV
1:10 Trailer files from Thingiverse: www.thingiverse.com/thing:354...
FixRC 6 ton Jack: bit.ly/46k3vHU
FixRC Screw Kit: bit.ly/3NTt7Ec
CHAPTERS:
Intro (0:00)
Thanks to AURA! (1:09)
Printer types (3:32)
Basic Workflow (4:55)
My Setup - Creality Ender 5 S1 overview (6:11)
Printer Anatomy overview (8:12)
Sonic Pad upgrade (10:00)
My first prints! (10:44)
Slicers / Cura Overview (11:52)
Printing my trailer! (14:44)
Basic adjustments/calibrations: (18:29)
Top Dos/Don'ts for a Beginner: (23:02)
LEARNING RESOURCES
Creality Ender 5 S1 unboxing & setup tutorial: • Creality Ender-5 S1 - ...
Basics of 3d Printer maintenance: • Maintain your 3D Print...
How to NOT break your printer: • How People BREAK 3D Pr...
3D printer calibration: the3dprinterbee.com/3d-printe...
All the different filaments explained: • All the Different 3d p...
Disclaimer: Some of products in this video were sent to me to review on my channel, but views are my own. Some of the links above are affiliate links and I will earn a small commission if you purchase through those, which helps to support my channel so that I can continue to make these videos. I personally use and trust all the products listed. :)
#3dprinting #remotecontrol #creality
********************************
CONNECT WITH ME
Become a Patron: / rcgirl
My Shop: rcgirl.myshopify.com/
Instagram: @RC_girl / rc_girl
Facebook: / thercgirl
www.thercgirl.com

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@RCGirl Год назад

Here's the printer I used: Creality Ender 5 S1 Printer - Web: shrsl.com/44m51 Amazon: amzn.to/3JA4CK2 It's little brother the Ender 3 is a great entry level little brother for $179. Cannot beat that! shrsl.com/45gm4

@crssbo4645 Год назад

Me: proud of some spacers I printed for my bike. RC girl: prints a complete trailer as a newbie lol. Great video as always!

@RCGirl Год назад

😂 well I'm also printing a bunch of rando things.. chicken arms, cable organizers, can lids.. 🤦🏼‍♀️

@RCGirl Год назад

Here's a link to the Ender 5 S1 printer I'm using - amzn.to/3JA4CK2 A more budget friendly little sibling would be the Ender 3 (which is also on sale using Code: AFF20): shrsl.com/44ola

@wgm-en2gx Год назад

You got some amazing results for the trailer. I often do a double take on some of your videos thinking "wow nice truck" and then realizing it is a RC model! You get a lot of amazing shots that look real.

@RCGirl Год назад

thanks so much! I definitely have room for improvement but it's a fun learning process (and also frustrating at times) haha

@FCRC 6 месяцев назад

I have made a 3D printed caravan, it is lots of fun to do. And watching the printer for ours doing it's job is mesmerising.

@MaddiesMeadows Год назад

Thank you so much RC Girl! I have been inspired even more to get this machine as I been wanting one for a while now! Thank you for making this video as you would make a great person to do more tutorials in the future with this machine. Have a great day girl and I love your content!!! ❤

@kenbrandmier3678 Год назад

Your personality, skill and care come across so well in your videos. Thank you for being a leader in this hobby. You're a pro.

@jeffreyduncan1242 9 месяцев назад

Great video thank you! In all honesty I've watched dozens of 3d printer videos and I learned more in your video than all of those combined! Thank you. The trailer looks amazing

@alvgeirsteganehauge6999 Год назад

You are awsome with all your knowledge allready!! Thank you for sharing!!!!

@MauzyrockRC Год назад

Terrific explanation and walk through, great tips. Thank you!

@ShermanIron 2 месяца назад

Thank You I learned alot

@nickrudd2568 Год назад

Top tip for all of you watching. Upgrading needs to be done one part at a time. Install set up and get it printing right BEFORE adding the next. A mistake i made, buy it all fit it all together. nothing works and its extremely hard if you aint clued up to find and fix the problems. One step at a time. Youll thank me.

@bco529283 Год назад

Great video very informative

@silaswatt6519 4 месяца назад

Very well done trailer

@tarekkhoury5384 Год назад

great in-depth review on the 3D printer. well organized and easy to understand. it does though seem that it needs a perfect environment and close maintenance. Great information Thank you!

@RCGirl Год назад

Yeah for sure. It's a precision machine and needs care, but it's well built and sturdy.

@brucedye576 11 месяцев назад

Very good I work in injection molding n you learned Very quick nice job

@echobeefpv8530 Год назад

Watching a 3D printer printing your object is so cool !! Been printing for 4+ years, still running my original Ender 3 ( with a LOT of upgrades !)

@RCGirl Год назад

Very cool. Seems to be a great printer for the price!

@aguyinnc2865 Год назад

Very cool!

@tomjohns8498 Год назад

You have made me smile now. I'm thinking a 3d printer is a tool for me. 😊

@mikebrinlee780 Год назад

Looks so good I have been out RC for so long you give me the bug again

@crssbo4645 Год назад

This is s super valuable video. It motivated me to give my anycubic the tlc it needed. And now i am printing my first heat tower (great tip). I use autotowers generator for cura. Summer heat and humidity vs cold winters and dry air can also greatly alter the print quality and can make a recalibration necessary. Thanks again for the great tips!

@RCGirl Год назад

Glad it was helpful. The auto tower feature is great!

@lars-uweschubert898 Год назад

Nice technology 👍💪 looks super real and amazing nice 3d prints 👏😉 congratulations 🥳

@bluegroovemodelsports9650 Год назад

Great information. Not a complete newbie at 3D printing and still learned a lot of tips

@RCGirl Год назад

oh good!

@simonblackwell7906 Год назад

Cool 😎

@aerialcombat Год назад

i was hoping you'd make a 3d printing video! 🎉

@emersonpedro3944 Год назад

Perfeito parabéns 👏👏👏👏👏❤️❤️❤️👍🇧🇷

@SlowFlyer85 Год назад

I been wanting to pick one up but it makes me nervous but great job on the trailer build good information great video 😀👍👍

@RCGirl Год назад

I was nervous too! But it was not over my head and I bet you'd pick it up quick too

@mattstanislen3165 11 месяцев назад

just got mine and did my test prints, it's awesome!

@RCGirl 11 месяцев назад

@@mattstanislen3165 so cool. Welcome to 3d printing! Mine has been going non stop lol

@wesbrackmanthercenthusiast4695 Год назад

My first 3d print was a benchy then I printed some fuznuz bumper spurs that my sister uses for riding our horses then I printed about a dozen gypsy vanner horse cookie cutters as gifts for our staff and friends at our horseshow and every time I set up the printer I print a part of a model train tipper wagon for quality reference I bought the printer for making casting molds for steam engines horse carriages horse drawn equipment and the 1888 frich size 0 sawmill I'm restoring

@blizsgarage8487 Год назад

I was just like you when getting a 3D printer and watching the first few prints intensely and how cool it is. I got the ender 3-s1 pro about 5mths ago, so fairly new as well to 3D printing. I use Cura for slice and tinkercad for design. 😀

@RCGirl Год назад

Haha yeah it's fascinating to watch

@MaddiesMeadows Год назад

How do you like Cura for slicing?? I been thinking of using it also!

@blizsgarage8487 Год назад

@@MaddiesMeadows myself I like it. I tried Prusa slicer but my print jobs didn’t come out as nice vs Cura.

@erickhuntergames Год назад

First of all, an excellent video, in fact I have my basecamp and I have put many things on it to decorate it, until a moment came when I said I would need a 3d printer for my future crawlers and this video came to me, by the way, speaking of the basecamp I am super excited about see that basecamp kit and everything you bought to mount it, I want to see what color you paint that pro-line bodywork.

@RCGirl Год назад

Thanks!! Getting a 3d printing seems to be a really fun expansion of the rc modeling hobby. I'm building the kit now. I think i'm going to go with matte black and gold for the body, but we'll see ;)

@erickhuntergames Год назад

@@RCGirl I can already imagine it, and I can tell you that they will be some spectacular colors and even more so in matte, personally my first and favorite option will always be red and black if possible with some touches of gray or white but always prioritizing red and black, hopefully and post the process of how you painted the body, I would like to learn from you, will you use a liquid mask? How exciting to see your work ready =D ... sorry i know this video is about the 3d printing and the trailer, just my mind was blown when i saw your instagram and the bc kit =D

@mech0p 11 месяцев назад

Ive thought about getting into 3d printing just to print spare parts for my rc. I figure with a printer costing between 300-500 i could make that back in 10-20 repairs or so not to mention all the stuff i could use it for around the house.

@steph291 Год назад

same as cnc machine :) !

@virtuosomuso Месяц назад

can it print military figures 1/35 scale , and is the detail any good

@wrbrc4865 Год назад

@RCGirl You are printing at an extremely slow speed. That printer with the Sonic Pad running Klipper is capable of printing much faster with the same quality. Creality provides Cura Profiles for the Sonic Pad that are a great starting point. Your 17h print could have been done in 5 hours give or take an hour. Feel free to reach out if you have any questions. I use the Sonic Pad too with my Ender 3 S1 Pro.

@wrbrc4865 Год назад

If you use the sensor that comes with the Sonic pad to calibrate it you can print at high speeds with 0 ghosting.

@RCGirl Год назад

@@wrbrc4865 Yeah I was hoping to get the best quality possible by going slower at first. I'll have to up the speeds. Still have not used the resonance compensation sensor but that's next!

@wrbrc4865 Год назад

@@RCGirl I had to do resonance compensation again after the latest update. It’s working well.

@RCGirl Год назад

@@wrbrc4865 did you have to print a bracket to mount the sensor?

@lesliejames5722 11 месяцев назад

Thank you for your fantastic review, good luck on your 3d printing journey, I have been printing for5 years and have just brought the ender 5 s1 with the sonic pad I am a bit concerned about using the sonic pad as all my other printers use marlin firmware, is it easy to use.

@RCGirl 11 месяцев назад

Yes it's a breeze, especially if you've been printing for years. You'll have to tinker a bit in whichever slicer you're using to link it and make sure that the object thumbnails show up on the sonic pad. Let me know if you have questions

@lesliejames5722 11 месяцев назад

@@RCGirl How do I link it to the slicer I use Cura at the moment but there was a copy of Creality slicer on the supplied memory card so I installed it and chose the ender 5 s1 and it put the settings in for me

@3Dprint4you Год назад

Well done on the video rcgirl but the ender 5 is not a true core x y printer

@tj9745 11 месяцев назад

After watching your video i ordered an ender 5 s1 and i did the trailer but i cant find the rack file do you happen to have a link

@RCGirl 11 месяцев назад

I don't have the rack either. I think it was a purchased rack? The link on thingiverse is broken

@DansRcAdventures Год назад

Hi you beautiful girl. Thank for sharing. I just bought a 3D printer myself. So totally useful video. And a nice print you made there. 🚙🚙🤘🏼🤘🏼

@kel5944 Год назад

The sonic pad isn’t for everyone. It’s much more technical than a 3d printer without one. It runs klipper, not marlin. That said, I like mine.

@Kuya_D_Z3 Год назад

I would have gotten the Bambu labs instead for that price. I'm almost 2 weeks in 3d printing picked up the ender 3 v2 for 98 on sale. Raspberry pi etc is not needed. It's more of a want. But for ender I do recommend marlin, or at least a marlin flavor.

@RCGirl Год назад

Good to know!