Beginners Guide to xTool P2 CO2 55W Laser | Detailed Assembly, Setup & Mirror Setup

Подписаться 62 тыс.

Просмотров 8 тыс.

50% 1

Beginner Guide to xTool P2 CO2 55W Laser | Detailed Assembly, Setup & Mirror Setup
All the details and information you need about xTool P2 laser. I will go through every detail so you can be confident in setting up your machine.
xTool Black Friday Deals is here! The best deals of the year! ( Black Friday: Nov.15 - Nov.24; Cyber Monday: Nov.25 - Nov. 30)
US Store: www.xtool.com/pages/black-fri...
Code for P2: ($250 off $2999, CODE: XTCUT250)
UK Store:
uk.xtool.com/pages/black-frid...
Shopping for xTool:
| UK | Promo code for UK shoppers ($80 off on orders over $999) - xTDIY
- xTool P2 CO2 55W laser - uk.xtool.com/products/xtool-p...
- xTool P2 Riser Base - uk.xtool.com/products/xtool-p...
- xTool Automatic Conveyor Feeder for P2 - uk.xtool.com/products/automat...
- xTool RA2 Pro for P2 - uk.xtool.com/products/xtool-r...
| USA | Promo code for US shoppers ($80 off on orders over $999) - xToolPartner
- xTool P2 CO2 55W laser - www.xtool.com/products/xtool-...
- xTool P2 Riser Base - www.xtool.com/products/xtool-...
- xTool Automatic Conveyor Feeder for P2 - www.xtool.com/products/automa...
- xTool RA2 Pro for P2 - www.xtool.com/products/xtool-...
Disclaimer*
This machine has been sent to me free of charge by XTool. However I'm not being paid to say any nice things about this product. Thoughts on this product are my own from personal experience.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#xtool #xtoolp2 #co2lasermachine
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Хобби

Опубликовано:

20 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@CasualDIY 8 месяцев назад

xTool Black Friday Deals is here! The best deals of the year! ( Black Friday: Nov.15 - Nov.24; Cyber Monday: Nov.25 - Nov. 30) US Store: www.xtool.com/pages/black-friday-cyber-monday?ref=Apd66c_ljojtYG& Code for P2: ($250 off $2999, CODE: XTCUT250) UK Store: uk.xtool.com/pages/black-friday-cyber-monday?ref=Apd66c_ljojtYG&

@alcha93 3 месяца назад

I just got mine. The delivery guy was lucky I was home cuz I went outside and helped him carry it. It's much heavier than I thought. Hopefully the husky standing/ sitting workbench i bought is hefty enough to hold it when it's going full speed

@CasualDIY 3 месяца назад

Oh yes its super heavy 😄👍

@MCsCreations 9 месяцев назад

Fantastic machine, Tomasz! Really impressive indeed!!! 😃 Congrats! And looking forward to the next video! Stay safe there with your family! 🖖😊

@CasualDIY 9 месяцев назад

Thank you kindly mate

@ChadsCustomCreations 9 месяцев назад

Great review love your content!

@CasualDIY 9 месяцев назад

Thank you

@staceyallen1989 6 месяцев назад

Thank you. Now I will unbox mine.

@CasualDIY 6 месяцев назад

Thank you for watching

@johnmelvin3107 6 месяцев назад

mine arrived today, my UPS guy had a time getting it on porch and he had a dolly.

@CasualDIY 6 месяцев назад

Yes its mega heavy

@f1hotrod527 7 дней назад

Great video, I will definitely use this when setting up my P2 which just arrived. But come on dude, #DONT-GET-SOFT. Its 100 lb., suck it up buttercup and lift it. No need to resign yourself to defeat and get the missus involved. Time to hit the gym. You got working mans flannel shirt. You got a cool Spartan warrior, Lumberjack, Viking warrior beard, time to start acting like it. Don't let the laser show you who's boss.

@CasualDIY 3 дня назад

Also I do have a brain and I know what may happen when straining my back. The problem is not just its weight but also the size, being very large and bulky. So it means it's hard to grab it in a comfortable way. But you go ahead tackle it on your own. I can't afford to be bed bound for a month with a bad back 👍

@Slovenianwoodworker 9 месяцев назад

Very good machine

@CasualDIY 9 месяцев назад

Yes it seems that way 👍😄

@nialzinth 8 месяцев назад

As a recent owner of a diode laser (2 months) I am already drooling of owning a desktop CO2 laser in the future. Won't be any time soon as I'm still experimenting with this new hobby but so far it's been very fun. This xTool P2 looks very clean and well designed. Curious how these devices will evolve in a year.

@CasualDIY 8 месяцев назад

Bit of a different beast compared to the diode lasers I have to say. Hope it will come down in price as well. Perfect machine for a small business

@davedavem 9 месяцев назад

Love the way you've built your channel! These xtool machines seem to be everywhere just now and it's really cool to see they involved you in their promotion. Hope you get to keep it!

@CasualDIY 9 месяцев назад

Thank you. Yes in this case that was the part of the agreement. I wanted this machine as it aligns with my needs to what I want to do with my business. Hopefully my future videos will give some good ideas to others so they can have some extra side income.

@johnpenman1548 9 месяцев назад

A very interesting first look at your marvelous machine. Looking forward to watching the video series about this CO2 laser.👍

@CasualDIY 9 месяцев назад

I think it will be an interesting one 👍

@ulaB 9 месяцев назад

There's only two screws you should be messing with when adjusting the mirror. Please check the howtos xtool provides first ;-).

@arteepee 9 месяцев назад

One of the best reviews of this laser I have seen! Thank you for going in to detail about the setup. One question - presumably when doing the test fire/mirror set up part you had to cover the laser each time?

@CasualDIY 9 месяцев назад

Thank you. Yes you have to close the lid. However the proces is instant. You press the button to fire the beam and 2 seconds later you can open the lid. So it's not too bad at all.

@fabriziomezzari5551 6 месяцев назад

Hi, congratulations for the video, would it be possible to run a business with the P2 in an apartment or would it be a problem with the neighbors due to noise and fume management? Would the ventilation system leave any residue in the room? Thank you very much for the sincere response

@CasualDIY 6 месяцев назад

I don't think the noise will be an issue however the fumes will. You may need to look into buying some sort of filtration unit. I think xTool actually has such a unit. Depending on what you planning to make with this it may leave some residue.

@fabriziomezzari5551 6 месяцев назад

Thank you very much for your kind reply

@barry.w.christie 9 месяцев назад

Excellent initial look at a CO2 laser, look forward to see what you do with this 👍 A few things ... 1) Why oh why would you put an emergency stop hidden away at the rear right hand corner of the machine? 2) Why wasn't the rear cover designed to hook into the top with the screws at the back securing it! Also ... XTOOL ... £4400 for a 55W CO2 laser with a 600mm x 306mm work area or this, the first one found via Gurgle ... OMTECH £2300 for a 60W CO2 laser with a 700mm by 500mm work area (+£150 for a water chiller). So more power, a larger working area and at nearly half the price ... mind you doesn't have cameras!! I'm all for companies making a profit, but this seems excessive, even for XTOOL!!

@CasualDIY 9 месяцев назад

1) exactly 2) exactly- and you do have to go in there from time to time. I guess later on you don't need to put the screws back on from the inside of the machine as the ones at the back should be sufficient. I think its about the extra features, build in air assist, build on fume extraction, two cameras, auto focus, no bottom and raiser accessory allows you to engrave every thick items. With the feeder accessory you can engrave or cut as long material as you want. The quality of this product is very nice and in theory it's a desktop machine.

@barry.w.christie 9 месяцев назад

@@CasualDIY OMTECH ... built in air assist YES, built in fume extraction YES, auto focus NO, cameras NO (can be added) but has a laser pointer, has both honeycomb and blade beds, max workpiece height of 230mm, emergency stop at the front YES, pass through for long items YES (although not automated). There is no denying that the XTOOL machine is a great machine, but I think nearly double the price for a few nice to have features is a bit much!!

@CasualDIY 9 месяцев назад

@@barry.w.christie I think it's because its new, I believe it came out this year. Most likely next year it will have a heavy discount... as P3 rolls in 😅

@welshpiper62 9 месяцев назад

It's too see stuff like this but how many DIY's can afford a lazer set up of this price.i understand from a sponsored item helps your funding but lets be honest how many can actually afford this item.

@CasualDIY 9 месяцев назад

It's definitely aimed at small businesses or at someone that wants some side income.

@ulaB 9 месяцев назад

It's about 5000 EUR. A lot of hobbyists buy more expensive tools and hardware than this for their hobby ;-). I for example have bought one, because I wanted to play with a bigger machine than the usual diode lasers - which I find kind of dangerous to begin with…

@HaltWhoGoesThere 8 месяцев назад

Help! When I did the 1st mirror path it was off. So I adjusted it from the back and got it centered. Now I'm on the 2nd mirror laser path and its not showing up anywhere! I've moved it to the left all the way to the bottom left and it doesn't show up at all. How do I get the 2nd mirror to work now??

@CasualDIY 8 месяцев назад

Ok so maybe you went with the adjustment too far try to take the first mirror where it was to see if that's the issue. Secondly I know it may be a long shot but is the mirror the correct way in? Mirror going to the inside?

@HaltWhoGoesThere 8 месяцев назад

@@CasualDIY Thank you for the response. After HOURS of me trying to get this, I finally got it.

@mreoski 6 месяцев назад

QUESTION: HOW is it possible to get the machine to not photograph the substrate you place in it with perspective? I inserted small wooden box - but the image in the xTool Creative Space software looks "fish-eyed" or with a "depth-of-field"? It makes it difficult to properly align an imported image to be perfectly centered on the substrate.

@CasualDIY 6 месяцев назад

It does have a secondary camera, just use the close up view with it.

@mreoski 6 месяцев назад

I tried. It doesn't help. See attached sample image.@@CasualDIY

@mreoski 6 месяцев назад

I was unable to reply to you and add a sample image for reference. @@CasualDIY

@CasualDIY 6 месяцев назад

@@mreoski unfortunately you can add media to RU-vid comments

@simonr6793 9 месяцев назад

Tomasz, I noticed that when you were doing the installation of the antifreeze that you actually placed your fingertips onto the tube of the laser 😢, I just wanted to let you know that this is a major No No !!! Doing this leaves behind a residue from your fingers, and overtime it will cause damage to the laser and the amount of time it will last before you need to replace it. I have this machine but by a different manufacturer and the very best advice I can give you is simply to clean the mirrors and the tube at the end of each day's use to remove any remaining soot. This will help the laser and other part's to last a way lot longer than the manufacturer recommends. As always brother 💯% 👍 🇬🇧.

@Slovenianwoodworker 9 месяцев назад

Kinda same thing as touching car light bulb when changing it.

@CasualDIY 9 месяцев назад

Thank you for the advice, I'll clean it up👍

@ulaB 9 месяцев назад

Is this true for a laser tube? The outer glass of the tube is just containing the cooling water. It's not like a lightbulb which gets hot and will burn the fat of your fingers into the glass… If the outside of the laser tube gets that hot, you have a very different problem.

@fliplmb 9 месяцев назад

I think you need a second channel for lasers 😂

@CasualDIY 9 месяцев назад

I was thinking about that, it could happen next year. However the more powerful lasts 30W and above can, and specifically the latest 40W Longer and of course this Xtool have enough power to tackle some of the projects that were only available to CNC machines. Hopefully I will show you some cool things you can make with them that work great in a woodworking workshop or a DIYers workshop that is thinking about having a small business. Times are tough and having an ability to earn extra cash 💸 is important I think. From my own personal perspective we even started our own small vegetable garden as they are so expensive to buy.

@fliplmb 9 месяцев назад

@@CasualDIY how about a 2nd channel to review new tech, and projects using them on the 1st channel. I’d subscribe!

@CasualDIY 9 месяцев назад

@@fliplmb that's an interesting concept actually 🤔 thank you for this idea 👍

@davedavem 9 месяцев назад

Moonpie Creations did that. Called the second channel Moonpie Reviews I think.

@georgeyboyhowe1685 9 месяцев назад

hi i love your channel because you used to build your own usable tools the last few videos you have done is just un boxing stuff for reviews i have seen this laser on every diy channel i subscribe to and its getting so boring wheres your original content its just like a ali ba ba advert

@CasualDIY 9 месяцев назад

Hehe sorry you feel that way. However it is a great tool and hopefully I will be able to show you in my future videos how that could benefit a woodworking workshop, and help in creating a bit of extra income specially with nowadays prices of everything. Secondly the laser videos are sponsored which means I can buy materials for my projects. Otherwise I would not be able to afford them. I made a big purchase of mdf and plywood, which after nearly a month I'm still waiting for. Those materials are for my workshop and house projects that I hope you will enjoy. There is only so many little projects I can make without repeating myself. But hey I always ask my viewers what project they would like to see, so let me know if there is something specific I can make that you would like to see.