xTool P2 Lens & Mirror Cleaning - COMPLETE WALK THROUGH

Подписаться 88 тыс.

Просмотров 19 тыс.

50% 1

🔗 xTool Test File on my Website: samcraft.shop/products/comple... 🔗 xTool Test File on Etsy: www.etsy.com/shop/SamcraftStore 🔗 Lightburn Version Test File Package: samcraft.shop/products/comple... 🔗 Foam Tipped Swabs: amzn.to/45J1xRa 🔗Official How To from xTool: support.xtool.com/hc/en-us/ar... 🔗 xTool P2 Desktop CO2 Laser: www.xtool.com/pages/xtool-p2?... 🔗 xTool F1 Dual Diode & IR Laser: www.xtool.com/products/xtool-... 🔗 xTool D1 Pro: www.xtool.com/products/portab... ⬇️ MORE LINKS BELOW ⬇️
🔗 All my xTool Videos: • xTool Lasers
🔗 My Tool Review Videos: • Just Tool Reviews
🔗 Gweike Cloud Pro II Review Video: • GOOD & BAD: Gweike Clo...
🔗 All My Laser Engraving Videos: • Laser Engraving Business
🔗 Our Family's Small Business: greenacrehomestead.com
🔗 Make Money Woodworking Videos: • Making Money from Wood...
xTOOL LINKS
🔗 NEW P2 CO2 Laser: www.xtool.com/pages/xtool-p2?...
🔗 xTool F1 Dual Diode & IR Laser: www.xtool.com/products/xtool-...
🔗 D1 Pro 20W: www.xtool.com/products/portab...
🔗 D1 Pro 40W Kit: www.xtool.com/products/d1-pro...
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I take you step by step through the process of cleaning the lens and mirrors of the xTool P2 55 watt desktop CO2 laser. This is a task that should be performed daily before you use your laser. Dirty lenses or mirrors will cause your machine's performance to dwindle. This will result in bad quality engravings or poor cutting performance. What causes the xTool P2 to not cut as well as before? You guessed it, dirty mirrors and lens!
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
0:45 - Tools & Supplies Needed
1:11 - How Long Does It Take to Clean the Lens & Mirrors?
1:25 - How Often Should I Clean the Lens and Mirrors on my P2 Laser?
1:56 - How to Clean the Lens and Mirrors of the xTool P2 55w CO2 Laser
13:37 - Closing Thoughts & Thanks
#laserengraving #samcraft #xtoolp2
*DISCLAIMER*
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!

Хобби

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@pineapplesandpalmtrees 3 дня назад

OMG, thank you so much!! You are a great instructor...I've had my P2 for about a month now and knew cleaning was necessary, but haven't come across much of anything on it yet. My lens was DISGUSTING! 😆thank you for saving me from future headaches!!

@user-by8fw1qg2r 5 месяцев назад

Thank you for the time to show how to maintain my XTool. Your video explained it very well.

@markesselstynmiller747 4 месяца назад

Another tip for CO2 lasers is to use the laser at least once or twice a week to keep the tube charged for the laser. If prolonged storage or no usage of the laser the laser tube will lose the charge over time. Glass tubes last about 2-4 years depending on usage.

@joshuacaylor881 20 дней назад

Hey Sam! I bought your test templates and love them. Thank you for all the help. Now that I have my settings dialed in, it is time to tear the machine apart and clean it. Great job explaining the process and emphasizing daily maintenance. I am going to practice these techniques daily now

@Samcraftcom 19 дней назад

Awesome! Happy to help!

@ronniecacia4098 8 месяцев назад

Thank you for providing instructions even this 74 year old Gramma loved!!

@craftingwithjean5599 26 дней назад

Thank You! Needed to clean my p2, found your video of instructions very helpful, to the point, good to follow along with.

@TraceyOut 3 месяца назад

I love the way you do the videos. You are knowledgeable, go at a pace that I can work alongside, and do it from a viewpoint that can be seen (a lot of people do not do this). The other thing I like is that while you are super knowledgeable and giving great instruction, you don't make me feel like an idiot. Thank you for the good videos. Also love your ETSY liste jigs!

@SkribbleMedia 16 дней назад

Hey just wanted to say thanks for sharing this info, really helped me out.

@ncgrave4586 Месяц назад

really looking forward to getting one eventually. this has been a great video on what to expect for maintenance.

@weaf27 4 месяца назад

Great job and thank you.

@Edgcreation 4 месяца назад

thank you very much for these instructions !

@JjordzzZ 4 месяца назад

Exceptional instructions!

@cathyl.1011 2 месяца назад

Great teacher! Thanks

@johnk696 7 месяцев назад

Thanks brother man, great videos and information.

@Daniel_Connor_ Месяц назад

Outstanding, thank you

@allenhuckabee3764 6 месяцев назад

Hello, been following you for sometime now. Can you do a video on setting up the P2 to work with lightburn. I attempted that today and did not work as I thought it should.

@deannaoverstreet4146 Год назад

Thanks Sam

@port3973 8 месяцев назад

great video thanks

@SandieJeanC 8 месяцев назад

THANK YOU FOR THIS INFO, SAM! Super helpful!

@Samcraftcom 8 месяцев назад

You're so welcome!

@Bdbrad71 Год назад

Nice piece of equipment

@protozee Год назад

nice thanks Sam-

@vickyrupe8999 Год назад

Awesome video 🤙🤙🤙🤙🤙

@keithfrazier5335 8 месяцев назад

Great job!!

@Samcraftcom 8 месяцев назад

Thank you!

@CopperRivets 8 месяцев назад

Thanks!

@Samcraftcom 7 месяцев назад

Happy to help! Thank you!

@joehimes9898 10 месяцев назад

Subscribed!!

@mortenolesen7761 Месяц назад

Premium content! Thank you! :)

@Samcraftcom Месяц назад

Glad it was helpful!

@GCheung55 Год назад

First?! Thanks for the video! I’d been wondering what maintenance is going to be like. I feel much more prepared.

@jppalm3944 Год назад

Good

@knightwing5555 Год назад

Hey sam. I have a single wide and found your content and absolutely love it! I was hoping to be able to ask if yall did crown molding in there? Or are planning to?

@karencary3312 Год назад

You got to clean!!!

@user-ei3by8pi7w 6 месяцев назад

Loved the video with great guidance. I have the hardest time to disconnect the little hose, so I am afraid to mess something up. My P2 is brandnew ... is it just hard to pull it out the first few times ? I really do not want to break anything ... your advice is much appreciated ! Thank you !!!!

@z4logitec 2 месяца назад

Your amazing. Thx. My laser power is less then it was. When i cut a multiplex 3.6mm I need to put the cutting at 90-12. Any Idea?

@esrarocket Месяц назад

Should the smoke smudging (fingerprint) be completely removed? Mine was reduced but I can't seem to get it completely clean? Do I need to replace it? Thanks for the great video!

@dekideko2920 2 месяца назад

noice

@NunyaB250 5 месяцев назад

Is there a video for cleaning the fan?

@jthespiceoflife Год назад

Good evening sir, does it have to be a Foam tip q-tip or can it be cotton? Also, how often do you need to fill the water tank in the back?

@gaiustacitus4242 Год назад

You left out cleaning of the mirror in the back of the machine. It's located near the coolant reservoir. It too gets residue buildup since it's near the exhaust fan, but doesn't need to be cleaned as often as the mirror near the laser head.

@Samcraftcom Год назад

You are correct!

@ShyneflowLC 8 месяцев назад

True... but it does rarely need cleaning in comparison

@mikepetitt9624 Год назад

Wow Sam I had no Idea you had to do this every time! I guess I’m super spoiled with the Shapoko ! Are any of these laser engravers you have been demoing less work to maintain?

@jonmayer 11 месяцев назад

You don't have to do this every time. I've got plenty of cuts on mine and have yet to clean it. It may help, but it's definitely still working as expected without additional cleaning. I will be doing this soon though to make sure I get a long life out of things.

@larryknavel3963 Год назад

When are you going to do more CNC Router video?

@kimlamarca1756 10 месяцев назад

Sam how do u know which way is the right side up on yellow Lense

@kimlamarca1756 10 месяцев назад

Do I need to clean the exhaust vents ,other than wiping it down, like taking anything apart??

@sandersengraving 4 месяца назад

Do you have to calibrate it after you do this routine maintenance?

@rienhardeman951 Год назад

Good day, I've heard/read somewhere that alcohol can damage the lens and mirrors and that it's better to use solution that's also used on glasses. Do you know anything about that?

@brendafogerty1685 Месяц назад

Do you recommend having replacement mirrors and lenses onhand or do these last a long time? Do you have a video on any requirements for the cooling system? Im considering the P2 but trying to do my due diligence first to make sure i know what im in for.

@ThatBartsim23 Год назад

Thank you for the info! I was a little unsure how to upkeep the laser and feel much better after your video. Do you ever need to clean the third back mirror?

@Samcraftcom Год назад

I should have shown that process, but cleaning it will not be needed as much... so long as you use the exhaust fan and an inline duct fan to always extract smoke and vapors from the machine.

@ThatBartsim23 Год назад

@@Samcraftcom thanks for the reply! I'll keep it on a slower rate of cleaning compared to the others then.

@ijames1981 9 месяцев назад

OK, so what if I lost track of the lens orientation. How do I know if I guessed right?

@pmartin6759 Год назад

👍👍👍👍👍❤️❤️❤️❤️❤️

@neilrisley6667 Год назад

Thanks for the video @samcraft is there a reason you don't clean the third mirror at the back of the machine or the camera lenses?

@Samcraftcom Год назад

The third mirror was cleaned at setup, but is otherwise not exposed to the fumes hardly at all compared to the others. To clean that one, you remove the rear back cover (about 12 screws). I cleaned the camera lenses, just skipped putting that in great detail in this already long video for the process. I wipe down the interior of the machine often with micro fiber cloths and such.

@guillermog2966 9 месяцев назад

Do you ever vacuum your machine?

@RFZIMMERMAN 2 месяца назад

What about the 3rd mirror in the back?

@protozee 9 месяцев назад

The convex side of a laser lens should be facing up. The laser beam needs to pass through the curved part of the lens first. Western and Korean laser machines always have the convex side up. Chinese laser machines used to set the convex side down.

@steveferguson1232 Год назад

Great info Sam. Have you tried curved material engraving yet. And did they send conveyor to you

@Samcraftcom Год назад

I've not tried that yet, but will be testing it out. I do also have the riser base and conveyor, yes. Lots more to learn and share!

@tillwohlfarth6920 2 месяца назад

Okay, I will do this every day, I will do this every day, I will do this every day ...

@ulaB 10 месяцев назад

Clean your exhaust vents too while you're at it :-)

@robertbankhead8661 Год назад

What XTool is the black unit? Haven’t seen that one before.

@ulaB 10 месяцев назад

The xTool P2?

@heffe2001 Год назад

I'm loath to admit that I don't clean my Co2 laser nearly as often as I should.. One thing that you didin't mention in the 'how often' section, a dirty lens or mirror can actually be damaged by the laser, resulting in pricy repairs.. I'd also mention that when choosing your gloves to wear, make SURE they aren't the powdered variety. As always though, great advice on (what should be, I need to do better, lol) routine maintenance.. I'm not sure about the x-tool, but with my Co2, you can possibly put the lens back in upside down, which affects power a good bit. I'd always make sure to be aware of the lens orientation when removing/replacing.

@heffe2001 Год назад

And I see at about 8 minutes you mention lens orientation, lol. I kind of figured you would, but it definitely bears repeating..

@heffe2001 Год назад

While I don't actually have an Xtool laser, don't they have 3 mirrors like most others? There's usually one on the head gantry, one on the left side of the gantry, and another in the back at the end of the laser tube? I haven't gone back to look at the video, but did I miss you cleaning that, or does the xtool not have/require that?

@gaiustacitus4242 Год назад

@@heffe2001 It does have a third mirror. The one at the end of the laser tube has four orientation points. The mirror will operate properly when reinstalled 90, 180, or 270 degrees from the position it was in prior to removal.

@protozee 9 месяцев назад

flat side up or down?@@heffe2001

@protozee 9 месяцев назад

@ttdale 11 месяцев назад

Do you need to clean the mirror in the back near the antifreeze? If so, how often?

@ShyneflowLC 8 месяцев назад

Far less often than the rest

@personofnote1571 Год назад

Sam, are you running off of solar with that Bluetti setup?

@Samcraftcom Год назад

It is solar, yes, but that does not run my whole shop anymore. My demands are beyond the input from my PV array. The BLUETTI runs all of my lights (quite a bit for video work), fans, and several other small things.

@KR-fn6sd 6 месяцев назад

How often should you clean the lenses?

@Samcraftcom 6 месяцев назад

It depends on usage/hours of machine runtime. I like to do mine weekly in slow times, or nearly daily in high production times.

@port3973 8 месяцев назад

hello, i dont know if you know the answer but i have a question about the lifespan of this machine, what do i do after the roughly 10000 hours? is the machine just a piece of furniture or i can replace something? thanks

@Samcraftcom 8 месяцев назад

That's the average lifespan of the CO2 tube in the back. You can buy replacements and keep on going. :)

@HaltWhoGoesThere 7 месяцев назад

Can I use 91% alcohol? or does it have to be the 70%?

@Samcraftcom 7 месяцев назад

That should be fine. :)

@Alessandra12394 Год назад

HELP!! After cleaning this my xtool is not burning. It will engrave but not leave the burnt color. Please help!!

@Samcraftcom Год назад

Double check that your mirrors are sitting like they should and that your lens did not get installed upside down.

@mikiauto73 Месяц назад

Nobody does this clean everyday.

@angrygaragemechanic Год назад

Welp, I have a bad feeling. If the rails and gantry aren't squaring up right, then the machine itself must not be assembled square 😮

@gaiustacitus4242 Год назад

While the top and sides are more than adequately padded for shipping, the feet of the machine sit directly on the cardboard box. If I were a betting man, then I'd place my money on any misalignment being caused by rough handling during shipping and not improper assembly at the factory since every unit is subjected to testing. p.s. - While every P2 is supposed to be thoroughly cleaned after factory testing, my P2 didn't get enough attention in this area. There was a fair amount of residue along the front and rear cover seals. It also had two minor scratches. Since those first scratches are out of the way I can treat it like a piece of production machinery instead of a decoration for my shop.

@jonmayer 11 месяцев назад

It's not hard to square up the machine though. I think they all get banged around in shipping too much. Mine was delivered on it's side...

@susan_halla Год назад

Did you get a pre-release machine, or did you order in the initial batch? If so, when did you order? Trying to figure out when I should expect mine; with my luck it will be the 5 days when I’m gone picking up my youngest from college!

@Samcraftcom Год назад

This is not a pre-release machine, but one of the first customer batches. I was adamant to NOT get any beta or prototype machine.

@susan_halla Год назад

@@Samcraftcom I don’t blame you! Very much looking forward to mine. Thanks for the tips!

@Dustywebs Год назад

If helpful, I ordered mine April 23rd and when I emailed them they said "It should ship before June 10th".... Really looking forward to getting mine too!

@gaiustacitus4242 Год назад

@@Dustywebs While my P2 arrived last Thursday, I'm still waiting on all of the accessories. The major factor in my decision for a P2 over an OMTech unit with a larger base cutting area was the automatic feed. Customer service can't even provide an estimated ship date for the items on back order.

@user-vj1ld5qk8h Год назад

CRAP! How do we know if the lens is the right or wrong way?!?!?!

@Samcraftcom Год назад

The curved side faces up. :)

@user-vj1ld5qk8h Год назад

@@Samcraftcom Thank you! I was doing it quickly (kids had hockey practice) and wasn't sure. it's cutting, so I am going with I got it right. Thank you for the response and the awesome video!