Behringer Model D #05 - Mixer, Feedback, Noise Generator & LFO Outputs

Подписаться 48 тыс.

Просмотров 12 тыс.

50% 1

For the 5th video in the series we take a look at arguably the "middle" chunk of the synth, which is the mixer section. We have volume control and on/off switches for each of the 3 internal oscillators a noise generator with white and pink noise and the external input. We delve into feedback looking at the options to root the main output through to the external input and level control when no external input is present at the physical input. We also look at rooting feedback from the mixer back to the mixer (cutting out the filter and VCA). Finally (as the jacks are there) we take a quick look at the LFO outputs too.
Check out the Oscillator Bank video here - • Behringer Model D #04 ... - and be sure to subscribe and come back for more content with the Model D from Behringer. There's a video with euro rack patching and modulation here - • Behringer Model D #03 ... .
Subscribe for more DivKid videos: bit.ly/DivKidYTSub
Be awesome! Support me on Patreon - / divkid
/ divkid
/ divkidmusic
www.divkidmodul...

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@benjaminwooningmartin6253 6 лет назад

Are you going to do a neutron series at some point? I would highly appreciate your expertise on the many features the thing packs.

@DivKid 6 лет назад

Hi Benjamin, possibly but nothing currently planned out. Suppose if enough people want it I'll do it.

@tobiaswinkler6971 5 лет назад

@@DivKid do it

@sergejholland4160 5 лет назад

@@DivKid Do it!

@s.weyerhaeuser7000 2 года назад

Do it

@stephenjames4937 6 лет назад

Thank you _so much_ for these tutorial videos. I'm finding the Model D more intuitive to use than my Moog Mother-32, but it's still hard for me to get some sounds from it and the inputs/outputs are a complete mystery to me. They don't seem able to talk to my Arturia Keystep.

@DivKid 6 лет назад

The key step should work totally fine CV out of it into the Model D 1v/oct input and the gate output into the Loudness gate input. Or you'd be better just taking the MIDI output to the MIDI input.

@AdamTheAd-vanc3d 6 лет назад

More crunch than a cornflakes factory, mother of jesus the D sounds like a beast. Btw this may not be the right video comments section to ask. Anyways here goes. How does the 1v/oct respond to diffrent oscillator cv. Say one module was running 1.25 for one octave and 1.35v for the next and so on. Lets say another vco module was outputting 1.12 and 2.12v on the next . You would have to recalibrate the initial frequnecy of the Model D , or am i chatting breeze ?, have you encountred this before ?

@DivKid 6 лет назад

Well oscillators don't provide CV themselves, that would be a sequencer, quantizer, MIDI to CV module, keyboard etc. Buchla modules respond to 1.2 volts per octave but I don't know of many other standards you would come across. A VCO module wouldn't put out a voltage based on it's pitch or pitch input. The voltage swing of a typical euro rack oscillator is -5V to +5V but that's not to do with it's pitch. Happy for you to ask anything anywhere, but I don't follow this question sorry. Can you re-phrase it?

@AdamTheAd-vanc3d 6 лет назад

DivKidVideo Haha sorry Ben , looking back on my question it was a bit arse about face. Thou completly understsnd your reply . Thanks geezer 👍

@DivKid 6 лет назад

no worries.

@MadelnMachines 6 лет назад

Is it is good idea to get this as a sort of budget back end for external oscillators. There are loads of euro rack oscillators I want like rings, plaits, mod brane 11, akemie's fm, zero thru like rubicon, erica wavetable, possibly a dpo or livewire. With the price of these I need some of cheapish filters, envelopes, lfos, vca and mixer as well as a sequencer or midi to cv module. Would this do the trick or am i better buying separate modules.

@DivKid 6 лет назад

Totally depends on what you want to do. Why just buy this for the oscillators and not for anything else? In a really simple sense it's important to note they share the same pitch tracking information. 3 separate oscillators wouldn't. You can only mix them down and not break sound the sound/output of each individually, again something you'd have from three separate units.

@KentuckyMusic 6 лет назад

Feedback sounds great, ripping fuzzy good.

@DivKid 6 лет назад

yeah I like feedback in all sorts of situations. Nice to see it as a option on this.

@yeppy013 4 года назад

why do I get a hot input signal metering from my model D into my babfacepro interface inside my cubase? I really have to put down the main out from the synth but the overall volume is low...I can't seem to get a healthy signal without maxing out the metering

@dan_dorjay 6 лет назад

Interesting to see how the feedback affects the resonance frequencies. I might give that a try on some other modules - I'm assuming that's something general and not a model D specific feature?

@AdamTheAd-vanc3d 6 лет назад

Dan Dorje Yes Dan , i recently built a feedback circuit and it was intresting to hear how driving the filter affected the sound of the filter feedback and even the envelope response.

@DivKid 6 лет назад

Hi Dan, yeah that's just the nature of a feedback circuit. Hi Adam, where did you build the circuit? A modular patch? Software? Hardware mixer?

@AdamTheAd-vanc3d 6 лет назад

DivKidVideo It is an experimental prototype circuit part of my diy project ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-i06k-zhlkCw.html

@DivKid 6 лет назад

checking it out, cheers.

@AdamTheAd-vanc3d 6 лет назад

DivKidVideo Kool ;-)👍

@PutItAway101 5 лет назад

If like me you spent a lot of time wondering why this wasn't doing anything at all.... the Main Out volume has to be up fairly high before the Ext in volume knob and switch will have any effect.