BELLTECH LOWERED 2018 RAM 1500

Подписаться 90 тыс.

Просмотров 49 тыс.

50% 1

We lowered my buddy's 2018 Ram 1500 4wd with a killer 2/4 drop kit from Belltech.
www.belltech.c...
SIGN UP FOR UPDATES ON THE NEW TOOLHEADZ CRATE SERVICE!!!
www.toolheadzcrate.com
Use code RUSTBELTMECHANIC at checkout for 5% off all turbos!
ryansdieselser...
NEW RUSTBELT SHIRT MERCH
www.teespring.com/rustbelt-mechanic
Instagram: rustbeltmechanic
The New vinyls are for sale over on my FB page here...
/ shop
Other Channels to Follow:
CAPTAIN RON: / @captainron1
Truck Master: / @truckmaster
JRC54: / 545454jrc
d
Duramax_Diesel: / @resurrecteddiesel
The Snapon Tool Review:
/ @thesnapontoolreview
Thanks to BAD ATTITUDE OFFROAD:
www.badattitud...
You can reach me at Therustbeltmechanic@gmail.com
Donations can go to : paypal.me/rustbeltmechanic
Mail can be sent to:
Rustbelt Mechanic
PO Box 715
Piqua OH 45356
Music by Envato, Audio Jungle, and youtube free music.
The Duramax:
7" BDS suspension lift spec'd out with...standard knuckles, upgraded fox shocks, dual steering stabilizers, rear drive shaft carrier spacer, Recoil Traction Bars.
Fuel Rampage wheels 22x12 -44 offset
Nitto Ridgegrapplers 37x13.5
2" Rear wheel spacers
MBRP 4" exhaust
Raptor Bedliner Paint job
7" Custom Exhaust tip by DCS Custom Fab
Rugged Ridge Rear Inner Fender Liners
All LED lighting
PPE Stage 3 Tie Rod Ends
PPE 2" up pipes
ProFab Performance Manifolds
XDP EGR Delete
XDP Intake heater Grid delete
Custom EFI Live Tuning
Transgo Jr. Shift Kit
Airdog 2 4G 165 Lift Pump
Deviant Race Parts Fuel Sump Kit
PPE Race Fuel Valve
Ryans Diesel Service 68mm Race Series Turbo (OLD)
Comp cams valve springs and retainers
ARP Head Studs
60 over injectors with Bosch nozzles by Bitterroot Diesel Porformance
PPE Dual Fueler Pump setup
HSP full intake and piping bundle kit
Custom oil catch can
Build Transfer case by Kodiak Trucks
One piece L5P driveshaft conversion
OPT7 rear tailgate light bar
Boost Auto Parts Switchback tow mirror upgrades
HSP compound turbo kit w/ billet wheel S475/1.15
Ryans Diesel Service 64/66 High flow vanes turbo

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@leomejia3838 5 лет назад

Would have liked to see the whole thing on how you lowered it

@THEEVERYTHINGTHINGCHANNEL 4 года назад

Leo Mejia he showed you the parts on how it was lowered.

@Moment2Forever 2 месяца назад

I spaced out during that intro and had to remember what I was watching when the video restarted

@theseaflower 5 лет назад

The suspension will probably be half an inch lower after you have driven the truck for a while. I just clicked on the subscribe button

@RustbeltMechanic 5 лет назад

Yep it’s also a great idea to check and retorque any new suspension hardware like this a few days after putting it on👍🏻

@muko2002 4 года назад

It will need the Inez Bracket so it can be center from the back . Planning to get this bit from Moes Performance with Viking shocks .

@asdetailshop 4 года назад

How’d it go?

@muko2002 4 года назад

Death Squad I haven’t got the kit since I recently installed my headers and tune and it was expensive 😅

@asdetailshop 4 года назад

I just installed mine, used illict customs no cut brackets. Rear wheel is centered, no wobbles. Was a lot of drilling, but worth it.

@muko2002 4 года назад

Death Squad how does it ride for you?

@asdetailshop 4 года назад

Luis Perez I can’t tell any difference from the stock ride. Roads here suck anyway, I’m on 275/55/20’s atm. Biggest change is it feels more planted, zero body roll in corners.

@johnroyal8859 5 лет назад

Some in channel vent shades, and different tips, that truck would really look good

@ryantheentrepreneur4040 4 года назад

Im old school and didn’t know they use struts now a days on trucks 😂

@XtremeScratchers 4 года назад

My truck was done 18 years ago when I bought it brand new

@Bodezafa 4 месяца назад

WHAT GRILL IS THAT?

@derrickhargrave1635 4 года назад

I still like the rake look to my 2016 sport 4×4...by lowering it kinda gets away from that is there anyway to both lower it with the rake look...without messing up the 4×4...

@PKDesigns2011 3 года назад

Yes, you can buy 2 kits like a belltech 2in drop front n Mcgaughy or maxtrac 2in drop rear

@thisguysgarage 5 лет назад

Pretty truck. Nice video

@mhopkins491 Год назад

No issues when u lower a four wheel drive

@willhumphries7842 3 года назад

What size wheels and tires do you use with the two Four drop

@jamesankney7535 4 года назад

would 24" rims rub with 2/4 drop 305/35/24

@jlopez8494 4 года назад

I'm about to get this done next weekend and will have the same setup. I'll let you know then.

@alphabeast9272 4 года назад

Commenting cuz I have 22 and want 24s

@jamesankney7535 2 года назад

@@jlopez8494 did ure tires rub and align good

@jvalencia1129 2 года назад

@@jamesankney7535 should not rub I have the same kit with 24s and have no issues

@lrs333 2 года назад

Is there a Belteck kit for a Factory-installed Air system

@alextubay 4 года назад

Very helpful advice 👍😊 cool guys 👌

@hawk001civic 2 года назад

When you got the alignment did you get camber right to spec.

@injunboy89 4 года назад

I need this for my '10 1500 lift kits left and right so I want to lower

@briancohen6980 2 года назад

I leveled my 13 Ram 1500 couple years ago, will I run into issues installing this kit? I don’t have any factory parts from before the level

@Onenito8A 2 года назад

I see that lots of people are having problems with wobble on the rear with a 2/4 drop with that kit . What do you recommend to fix that.

@WHOS_GRIM Месяц назад

Upgrade your rear shocks

@THExLAWxMAN 5 лет назад

I'm curious, when you level a truck, do you readjust the headlights? Back down to factory settings or just let them shine into everyone's eyes. Most big 4x4's here in Texas get leveled, but the lights go straight out into the eyes of passing motorist and not down to the street like factory settings.

@RustbeltMechanic 5 лет назад

It’s always good practice to readjust headlights accordingly

@cbeaulac 2 года назад

is this bad for towing? cutting the frame like that?

@xrickx73songs 4 года назад

What if i just want to level my 2014 Ram, can i just do the 4" drop in the back?

@saltstire7804 2 месяца назад

No. I tried it. Looks like it's doing g a weelie .

@ralfkorus4660 3 года назад

Hi, what size tire are you running on the truck when it was done?

@rickfrancis1461 4 года назад

Hey Rustbelt Mechanic, I just got this kit and it talks about a mod for notching frame for drive shaft clearance. '13 Crew Cab version. It has a plate for insertion after notching frame. Did this apply to the kit you installed on the truck?

@RustbeltMechanic 4 года назад

Nope, totally ignored that for this year application.

@rickfrancis1461 4 года назад

@@RustbeltMechanic never had any clearance or rub issues?

@RustbeltMechanic 4 года назад

Rick Francis nope he never did

@rickfrancis1461 4 года назад

@@RustbeltMechanic Thanks for your input. Then I will try this install. The notching of frame had me spooked.

@zacsmith5925 5 лет назад

Beautiful!

@diymisfit_Mechanic_UDX404 5 лет назад

Turned out nice

@mosesmaravillo7142 3 года назад

Do you know if i can use the same kit for my 2005 ram 1500?

@amermuscle 4 года назад

If i bought truck with a leveling kit can I buy this system to lower it or would I have too buy the stoxk parts then lower

@RustbeltMechanic 4 года назад

No you would not need to buy any stock parts

@JosueRodriguez-vw3zj 3 года назад

What is the part number for that kit?

@sgrkuska 3 года назад

965sp

@amermuscle 2 года назад

Does it ride better now ?

@AntonioClaudioMichael 5 лет назад

Good video kyle

@jlopez8494 4 года назад

Which headlights are those?

@5cent27 4 года назад

I'm about to order this kit for my 18 4x4 but have a few questions. How was the ball joint angle on the upper? Is it at an extreme angle? Also in the rear, why did you end up not using the notch that's provided? Again in the rear how good of a job did the panhard bar relocation bracket work? Did it center the rear axle or would an adjustable bar be recommended as well? Sorry for all the questions.

@RustbeltMechanic 4 года назад

The track bar relocation worked great and we have no issues what so ever with control arm or ball joint angles. On this specific vehicle we did not have to use the bracket for cutting the frame to clear the drive shaft. This did not have to be done for an 18.

@5cent27 Год назад

Haha thanks for the reply! Only took me 3 years to read your answers 😂🤦‍♂️.

@bryanhardy2187 4 года назад

If I’ve got the exact same truck with 26” rims already will this fit? I’ve got 3.5” front and 5.5” back clearance now. Sounds like yes but 650$ and a few hours on the line would like to have an opinion from an installer

@JoseGarcia-gr2wm 4 года назад

It does fit have it currently on my 2010 ram 1500 with 26” dub ballers. But should be cautious on how you drive because if you hit a big enough jump you might bottom out and rub onto your front fender

@bryanhardy2187 4 года назад

Hell nah I’m good

@kennethstewart7779 4 года назад

I have a Bellteck 2" - 4" drop, rides too rough for me, could you recommend some great shicks?

@RustbeltMechanic 4 года назад

Yeah.... so later on he ended up trying new shocks also...still rode too rough for what he wanted and ended up taking this kit off🤷‍♂️

@XstoVB101 4 года назад

Hi I want to drop my ram but there are 2 shops that i called and they said that the truck isnt going to be 100% good . Reason becous of the aligment or something that the tires are going to waiste faster things like that . I know this is not original but it makes me think about it know . How much % do you recomend me so i can use this kit to drop my truck is it worth it after ? I want to have a desent lower truck and ride it good. Thanks

@wellthatsretarded2591 4 года назад

Contact Moes Performance on IG or the Website # and they’ll recommend the 2/4 drop with Viking shocks Pan hard bar sway bar and something else. But can’t remember what exactly. Contact them and you’ll get all the answers needing fast answers