BEST 3D Printer? - Creality CR-10 Prints Wood, PLA, ABS, TPU - FULL REVIEW

Подписаться 200 тыс.

Просмотров 190 тыс.

50% 1

CR-10 Prints Wood! - Get a 3D Noob's perspective of using the CR-10 for the first time. This video will help new guys understand what your first time experience will be like. Also some first time tips, and mods for getting TPU to print on the CR-10. Great video for showing CR-10 printed examples of various filaments like PLU, ABS, TPU, and Wood Filament. Links and resources below for your convenience.
Links to the CR-10 Printer & Resources below :
Creality CR-10 3D Printer US and EU Versions below :
----------------------------------------------------------------------------------------
CR-10 - US Version in Blue here :
COUPON CODE : CR10BLUEUS
goo.gl/97jAkp
CR-10 EU Version in Blue here :
COUPON CODE: CR10BLUEEU
goo.gl/Y67mFo
CR-10 US Version in Coffee Brown here :
COUPON CODE : CR10BLACKUS
goo.gl/HEpYw9
CR-10 EU Version in Coffee Brown here :
goo.gl/3RCJUo
Various Filament spool links compatible with the CR-10 :
PLA 1.75mm 1K Filament Spool (easiest to print) here :
goo.gl/sEkMzX
ABS 1.75mm Filament Spool (hardest plastic, but hard to print) here :
goo.gl/cpMRda
Hatchbox TPU 1.75mm 1K Filament Spool here :
goo.gl/iPKYNH
Ninjaflex TPU 1.75mm Filament Spool here :
goo.gl/spC6tb
Wood Filament 1.75mm 1K Filament Spool here :
goo.gl/UTnJto
Extruder nozzle cleaner filament here (needed between prints or changing to new filament) :
goo.gl/ENmECk
BuildTak for the glass bed here :
goo.gl/UkpJWn
Link to the TPU STL File Part for modding your extruder to print TPU here :
goo.gl/myft37
Link to the TPU Mod part installation video by Josh here :
goo.gl/PycJeF
Link to download CURA Slicer Software for STL files here :
github.com/Ultimaker/Cura
Link to Thingiverse (largest free 3d printer file resource) here :
www.thingiverse.com
Link to Simplify3D $150 3D printer slicer software here :
www.simplify3d.com
Links to some of my favorite RC Hobby gear including
radio, batteries, quads and building accessories below :
---------------------------
My radio of choice : TARANIS X7 by FrSky here :
Black : goo.gl/yAgKMT
White : goo.gl/NVVGxC
My favorite Helping Hands 6 armed soldering station stand :
goo.gl/Ynhcbh
My current favorite ( yes I changed my mind ) field soldering iron. Hopped on the hype train for the TS100. Had to get one for myself. It was a treat. Works great! Link here :
goo.gl/LuBLqZ
My favorite economy priced 4S 1300mah battery here :
goo.gl/vUf2DU
My drone landing pad of choice here :
goo.gl/9EnekC
My Fatshark HD3 Goggles of choice here : Use the code : RC18OFF
goo.gl/z2PgQf
Economy $50 pair of googles that have two diversity antennas. Great for the price.
goo.gl/CLPiyy
My favorite micro brushless quadcopter : Emax Babyhawk here :
goo.gl/ZSwquM
MJX BUGS 2 GIVEAWAY !
MJX RC BUGS 2 is up for grabs by July 28th! Visit our video below and make a comment to enter.
• FREE DRONES - 3 CHANCE...
Become an exclusive Quad Club
Member on our Channel :
------------------
Lifetime membership including :
- Members Only discounts on Quads & Fpv gear
- Personal Tech Support
- Weekly Updates
- Member News
Join the Quad Club on or website :
www.dronecamps.com
Subscribe for weekly new drones, honest reviews,
prototypes, tutorials, and tech gadgets. - Mon - Fri
Drone Camps RC
www.dronecamps.com
LIKE us on Facebook
/ dronecamps
FOLLOW on Instagram:
/ dronecamps
Business Inquiries please email :
drone camps @ gmail .com

Развлечения

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 235

@dronecamps 7 лет назад

Disclosure : I may be an affiliate of any product shown or tested here on the channel. It may have been free or given to me by a discount. Either way. It is my duty to you the viewer to give an honest, unbiased opinion on an item. I’m pretty straight forward. If something sucks I will let you know. If you choose to purchase a product from a link here I may benefit from a small commission. Or may not if it is a company who just sent it for a one time review. I don’t get paid for making a video. So to those of you who do support the channel I want to say thank you in advance. Please keep watching and I will keep up the great videos!

@AdventZER0 7 лет назад

Something that you can try instead of using tape for you bed adhesion is hair spray. i recently got a CR-10 which is also my first 3d printer and i have been using hair spray and have not come across any problems thus far

@kamielariens1503 6 лет назад

Drone Camps RC you Can make Some case for the printer than the ABS wil smelt better

@ualdayan 6 лет назад

Hairspray is great for ABS - but beware - I had a glass bed shatter when the print was finished because the ABS was trying to shrink more than the glass, and the hairspray had glued them so tightly together it placed a lot of stress on the glass (and it wasn't a lot of hairspray either). Personally I don't bother with ABS anymore - if it's a model or something where small details matter I do it in PLA, if it's mechanical I use PETG (which tends to stick so well to glass that it will take chunks of your borosilicate glass bed out with NO adhesive help - so don't push that first layer down near as much as you would PLA/ABS, PETG is sticky) - PETG layer bonds very very well, parts actually break across layer lines rather than along them.

@hammysmad 6 лет назад

Is the new promo code out yet? I tied registering but it seems to be frozen on their website.

@Kittzz 6 лет назад

Make an enclosure for the printer to keep constant temp and stop air movement from causing the ABS to pull up and warp.

@Ruc1f13 6 лет назад

Your noob review was one of the most useful I've found! While, yes, I've seen enough online to guess your ABS issue (bed is losing too much heat), you are the first one I've seen give cost breakdowns per print. I was expecting 50-100 percent more which would be enough to keep me from experimenting to find the sweet spots. Your video has shown me that I can actually pull the trigger on my first purchase and can afford to become a better person through learning from my mistakes. Thank you sooooooooo very much!

@mikedevey2748 6 лет назад

realising that you can 3D print wood actually blew my mind.

@GeorgeFrick 6 лет назад

I appreciate all of the close-ups and angles of the printer, nice job and good variety of first prints.

@DominicVizor 6 лет назад

This has helped a lot!, Thanks for the info! Great video as usual, keep it up

@Classlessrook32 6 лет назад

I absolitely love how in depth you went into this printer, this video is better than most other reviews

@dronecamps 6 лет назад

Thank you!

@TheGugustar 7 лет назад

Nice video! Thanks for sharing all those tips, and thanks for the links :)

@garrypotter2661 6 лет назад

This is one of the easiest to watch reviews I have seen on here. Thank you, it has been extremely informative and I doubt you left anything out. The CR10 Is now firmly on my possibility list to buy as a first printer. Good luck with your ABS keep us informed. Subscribed

@dronetrooperfpv7810 6 лет назад

Garry Potter I am looking at getting this as my first printer. I know tech advances quickly, is this still a great contender today?

@JonathanAgoot 6 лет назад

Awesome video! Very down to Earth explanation and easy to understand. No fancy intro or distracting music.

@lkibbler 7 лет назад

Wow you gave me great advice two years ago when I was getting into drones and now here you are talking about my new hobby 3D printing. I got my CR-10 (my first 3D printer) 5 days ago and love it. Thanks Justin we are on the same curve here!

@dronecamps 7 лет назад

Awesome Lee. Glad I could help. Now I'm learning something new with you. My CR-10 is such a cool printer. I can't stop printing.

@bluelobster56 7 лет назад

Great review, love the "wood" printing! 👍👍

@madhouse740 7 лет назад

Great info!! Great reviews!!

@FullTiltOn 6 лет назад

Just wanted to say - Love the shirt you were wearing! I'm a long time Shenandoah River Rat and I also 3D print. I was looking at this printer as mine only has a 200mm square build area

@RobotMama 6 лет назад

You will need a closed chamber arround your printer for ABS to work. This makes sure that the heat is evenly distributed and constant, so the ABS layers won't shrink making everything curl.

@whitham1961 7 лет назад

Great job explaining in laymans terms. Your a good person, i can tell.

@thomasv3146 7 лет назад

Great Job on your Project!

@DargoDog 5 лет назад

Great video!!! I am a RC geek as well, crawlers, and looking at getting one of these.

@carlbeck304 7 лет назад

Nice video. When I got my CR-10 the first thing I did was purchase a 12 x 12 inch PEI Sheet from Amazon which came with a sheet of 3M glue sheet. Installation was easy and PEI is a great bed surface for any type of filament.

@seathrunmagaoinghous4119 6 лет назад

Thanks for the review

@barryhuizing2804 7 лет назад

Very awesome!

@alansavage9656 7 лет назад

Excellent review & great job on your prints Justin!! Glad that you can make a Babyhawk frame with that :)

@dronecamps 7 лет назад

Thanks Alan. Pretty cool I can do so many things with it. I'm making a permanent home for it here.

@BigDuke6ixx 6 лет назад

Great info. thanks!

@jorgsandmann1766 6 лет назад

one of the best 3D-Printer reviews i ever saw :D

@tedlov06 7 лет назад

Great job on your projects you did. I want one but I got so many hobbies the wife would have my head in the printer lol. Thanks for review Justin.

@dronecamps 7 лет назад

Haha aww man. I feel the same. I almost don't have time for another expertise

@bkbrown5881 6 лет назад

Excellent review. What made you choose this over say the tevo tornado? I am looking at this one and the tornado for my son.

@JayGee6996 7 лет назад

Thanks for the video, got one of these en route. A side note RE carbon - it is an abrasive filament and wears out your nozzle, as long as you keep an eye on it and have a spare you're all good.

@dronecamps 7 лет назад

👍🏻

@3DHP 7 лет назад

Great video,my CR 10 is on its way to LasVegas.I would like to prebuild an enclosure.What size does it need to be to allow bed travel? I will put the power box outside of enclosure.Probably wooden frame with plexi glass sides to see what going on.Also what type of camera do you use for your videos?It looks great.

@unclebuck5957 7 лет назад

Looking for a 3D printer. You picked the cr-10, then it,s good enough for me. This was a great review

@dronecamps 7 лет назад

Thanks Robert. This is a solid printer 100%

@CousinRyan 5 лет назад

The mod you make to print TPU, does it have to be removed to print PLA, ABS, and wood? Or can it just remain with no effect on the non TPU filaments?

@dpr302 6 лет назад

Where did you get the model for that pour over coffee maker?

@orcdoc 7 лет назад

I've been printing ABS on my Up printers for a couple of years and it is a great material, but you need an enclosure to keep the heat in. If it cools too quickly, it will warp, so also remember to turn the part cooling fan off completely. I'm getting a CR-10 soon so I am planning on building an enclosure for and getting a brewers heat pad to place under the frame to help with heat loss. I wouldn't recommend including the control box inside the enclosure, the heat may affect the electronics in there, but the printer itself should be fine. One of the best things about ABS is you can use acetone to do a chemical weld on parts you want to stick together. They will never come apart. Also, you can use acetone vapours to smooth out parts so they look almost as good as injection moulded parts without having to sand them. Get video though, really enjoyed your review and made me even happier I had ordered one :)

@GadgetReviewVideos 7 лет назад

I've been using Simplified 3D for about 6 years. It keeps getting better and well worth the money, highly recommended. To answer your question, Yes most mixed filaments are PLA.

@dronecamps 7 лет назад

Thanks GRV !

@GadgetReviewVideos 7 лет назад

No Problem, did you get my email on ABS printing tips from my experience?

@dronecamps 7 лет назад

Oh yeah. Just gotta get time to read and reply 👍🏻

@GadgetReviewVideos 7 лет назад

Cool, just wanted to make sure it didn't get lost in the abyss. Later

@rhinavauhtgaming 6 лет назад

I might get this as my second 3D printer

@dronecamps 7 лет назад

Just had the manager update these Coupon codes. They are now working to get the discount. CR-10 - US Version in Blue here : COUPON CODE : CR10BLUEUS goo.gl/97jAkp CR-10 EU Version in Blue here : COUPON CODE: CR10BLUEEU goo.gl/Y67mFo CR-10 US Version in Coffee Brown here : COUPON CODE : CR10BLACKUS goo.gl/HEpYw9 CR-10 EU Version in Coffee Brown here : goo.gl/3RCJUo

@olleapelqvist5288 7 лет назад

Just ordering mine :) with the discount. Tanks!

@LonelyWolfJ 7 лет назад

Is there also a discount version for EU coffee version? Thank you!

@dronetrooperfpv7810 6 лет назад

Is this a great printer in 2018? I ask cause I am looking for my first printer.

@michaelskalla7722 6 лет назад

How much power does this machine consume? Just curious with a 32 hour print. Love the use of wood filament.

@VulcanBomber101 6 лет назад

I was considering making some ducts for the DJI Phantom 4 blades, however I am also considering maybe just trying to make some blades with vertical winglets. Any thoughts on this, and if so what would the best medium be to use?

@TheJankyTank 6 лет назад

Where can I find a download of the coffee maker?

@StephanMiske 6 лет назад

@Drone Camps RC What did you end up with for extruder and bed Temp for ABS? I have seen the other suggestions just no temps.

@jamble7k 6 лет назад

what's this one like for printing gopro mounts with flexible filament, can you recommend a type for this?

@ediles7678 6 лет назад

where can I get the glass covering?

@alexandermuller6087 4 года назад

How did u prepared the wood print that I looks like real wood?!

@Tom-xy9gb 5 лет назад

Thank You!!

@hazoish7670 6 лет назад

Build tank on mine got really worn down and the first layer stopped sticking so I had a bunch of strings

@n0ukf 6 лет назад

Wondering why the top and bottom of the coffee drip stand are not parallel. Did it sag after printing?

@rraaddff 7 лет назад

If you would like a successful print from ABS the best thing I found out is to get a box or something to cover your printer with. Doing that the ABS will not warp and you will LOVE the way it comes out trust me ABS is about the only filament I use. I don't use PLA mush because I don't like how it melts with heat.

@RiffyDevine 5 лет назад

How did you get the wood to stick

@tamgaming9861 7 лет назад

Do you know if it is possible to print polycarbonate with the CR-10 - or if there is any way to improve it so that it can use it? The new BED on the CR-10 v2 version has now 24V. But i am a beginner in printing and would need PC for my project :-) Thanks for your answer :-)

@sandeshsruge5525 6 лет назад

hello sir im new to 3d printing which of these should i buy Creality Cr10 or Creality Cr 10S thanks in advance

@alphasxsignal 7 лет назад

Nice wood look project for coffee holder.

@ManMan-zx1wg 6 лет назад

What all can the Cr10s4 print with? Filament wise

@gundog_millionaire 6 лет назад

what heat and speed settings do you run the wood filament at?

@samuelpalfreyman9143 5 лет назад

so good

@thatonesnowboarde 6 лет назад

@Drone Camps RC with ABS try some kapton tape for your build plate and/OR make an enclosure to keep the temperatures equalized inside your printing environment

@uberdude8529 6 лет назад

Great video, have you had any luck with ABS so far?

@sunchips17 7 лет назад

Drone camps rc, great video bro keep it up I can't wait to get one I want to not only make drone frames I also want to make planes as well. You have definitely eased my mind on getting one as a amateur 3d printer user.

@dronecamps 7 лет назад

Thanks Michael it's a really cool thing. My ideas are endless with it

@sunchips17 7 лет назад

Drone Camps RC my only concern is do all my plane designs have to be vectored jw.

@dronecamps 7 лет назад

If you design them to print they need to be STL or Obj files

@sunchips17 7 лет назад

Drone Camps RC ok got it I figured as much I am appreciate the feedback

@dronecamps 7 лет назад

Your welcome. Check out Autodesks free program called TinkerCad

@forthidiot4297 6 лет назад

how tha result flexiable filament

@ediles7678 6 лет назад

where do i get he buildtech you talked about?

@stonecold7306 6 лет назад

Try petg and print the cable holder for your printer and your abs got cold that why it warped you need to have your printer in a enclosure to print abs to keep the temps high.

@iGameOvertv 6 лет назад

Great video! Thank you! Have you tried printing tpu but turn off the retraction in the printing software?

@dronecamps 6 лет назад

No does that help?

@iGameOvertv 6 лет назад

Yeah, it helps a lot. it minimizes the issues very well.

@garyritter9076 6 лет назад

Next time you print with wood with thin cross sections, after sanding try sealing it with thinned EPOXIE. Wood done this way makes it strong as steel. And boat builders do this because of the resulting strength . Cool video and great information thanks.

@CoxJoxSox 6 лет назад

Which autocad did you learn and how long did that take?

@madyet5235 7 лет назад

how fast can you print tpu with that printer?

@Josler1 7 лет назад

Is gear best reliable and can u but stuff to the UK

@headfog7621 7 лет назад

When i print with ABS i turn my cooling fan off and the curling stopped...heat will expand, cooling will contract, the fan is cooling the top to quickly and pulls it off the bed. Lower or turn off the fan and keep raising the bed temp till it stays stuck. Great review.

@dibraniuk 6 лет назад

Awesome video, will this print direct from google's sketchup make> thank you

@3MinecraftMen 6 лет назад

Doesn’t the heated bed help with ABS ??

@JAYTEEAU 6 лет назад

ABS is nobodies friend ;). Thanks for sharing

@richardlow1274 7 лет назад

Great video, thanks for the review. I'm glad you got the wood/TPU to turn out and that video/mod you linked to for the TPU was money. You're going to need an enclosure (aka sealed off box) to print ABS, otherwise it cools and warps and pops off the bed mid print. The enclosure keeps the whole thing warm until it's done printing. Join the CR-10 Fb page and there's a bunch of people who have made enclosures to print ABS there.

@dronecamps 7 лет назад

Thanks Richard. Just joined up. I'm working on my enclosure now :)

@Irigoyen4 7 лет назад

Hi again, I had similar curling issues when trying to print longer parts in PLA on the CR-10. What I did was set the fan down to 10% for the entire print which worked really well. I think the fan is pretty strong on this unit, or maybe it's the nozzle, but the plastic seems to cool too fast causing shrinking on one of the corners or ends of the print. I am not sure if the same is true with ABS but, it might be worth the shot:)

@willmercier2852 7 лет назад

Nice coffee maker! That printer is nuts, for your first one you seem to have picked a good one. It's only a matter of time until we no longer order products, just download and print ;)

@Melog01 7 лет назад

You can try ASA filament, which is similar to ABS without shrinking and warping

@asfandiyar5829 7 лет назад

hey do you think i could print a whole quad copter skeleton with a 3d printer and would it be durable as durable as wood? Thanks.

@dronecamps 7 лет назад

Yep. Print in Abs

@Irigoyen4 7 лет назад

Hi, As you probably are aware, 400 mm is 16 inches, not 18. I have found printing TPU on glass works really well, and the print peels right off. PLA, in many cases (I have found) sticks really well around 70 deg Celsius and is really easy to snap off around 60 degrees. One thing I have found with my CR-10 is that the build plate is so large, and the heat is concentrated in the middle, the centre of the plate bulges enough to make it necessary to make the corners a little bit lower than what is normally needed while levelling the plate...I may try an insulating pad. Unfortunately, it is not the glass itself as I have flipped it and rotated it and the spot seems to always be in the centre, right above the heating block. Happy printing!!

@dronecamps 7 лет назад

Thanks PropNut. Yeah I know I was just measuring it again with a ruler. My bad

@tooniis1403 6 лет назад

for bed adhesion i only use a well cleaned glass bed. no glue stick, no masking tape, nothing but a clean glass bed, and it works very well! also u get the bouns of a glossy finish on the surface that was stuck to the bed.

@iyadsubh 7 лет назад

Great video one favor if you still have the original box can you please give the exact sizes of the box. They list that on the shipping page but I wanted to make sure because a one inch makes a huge price difference when someone try to do the shipping from a country that the seller ship to but not to another country where it's really going to. I hope you can do it. Believe it the difference anywhere between $70 to $170. Thanks

@nicoleklein790 6 лет назад

Hello! Thanks for sharing, do you know how this will print from a scanner? I am new at this and do not know the 3D software and want to buy a scanner, was thinking about this one: Matter and Form MFS1V1 3D Scanner. Thanks!

@dronecamps 6 лет назад

Yes as long as you can load it into a slicer software like CURA and export it as a Gcode file for the CR-10.

@gunslingerfourtysix 7 лет назад

what type of filament do they give u with the printer ? abs or pla ? or dont they give u complementary roll ? 7:45

@dronecamps 7 лет назад

Pla

@ferchorbd 6 лет назад

Apply Purple Elmers glue stick in your bed for ABS . Sticks very good . Actually I don't play but ABS , is my favorite . Happy prints 👍

@dkiiv 7 лет назад

Nice video, try a PEI build surface. I use a PEI build surface on printer and it works perfectly! All of my parts just pop off of the bed once it cools off

@nuuskapeke11 5 лет назад

UHU STIICK MAAAN the best of the best glue stick onthe Wörld Thunps Up

@Pyromancers 7 лет назад

Masking tape actually works great and doesn't need replacing often if you do things correctly. Buildtak is great for playing polycarbonate though.

@tiamat1296 6 лет назад

What are youre thoughts on the kossel anycubic?

@pawpawtina 6 лет назад

i love my delta.

@thomascrown3230 6 лет назад

Great Channel. Have you tried to print Nylon and if not will you? I think Nylon would be great for making rc parts.

@albertroswell 6 лет назад

I can help you with 3d printing stuff, but I need some help because I want to be part o the micro drone building world, where can I start? I purchased my 3d printing just for this :), thanks

@TheGFS 7 лет назад

Buildtak is soooo worth it, big fan of that stuff :)

@pmkwiek 6 лет назад

You should insulate the bottom of your aluminum pan to get better heat characteristics. It will help ur abs prints

@raven50x 7 лет назад

For the ABS print, you might try using the 'glass side' of your bed by flipping it over and using a glue stick or hairspray to make the print adhere.

@dronecamps 7 лет назад

I'll try that thanks Raven

@PongoXBongo 6 лет назад

Wonder if you could print Duplo-Lego adapters on that thing? Then your kids (or you) could build large Duplo structures with finer Lego details.

@Irigoyen4 7 лет назад

You're so lucky you got the blue one! I got the "Harley" version:)

@dronecamps 7 лет назад

Dude I love the blue one 😂👍🏻

@Irigoyen4 7 лет назад

Totally! The "Harley" version looks like they just didn't have another colour at the time...

@dronecamps 7 лет назад

Hehe

@valveman12 6 лет назад

A glass bed and hairspray or glue stick works great. I don't use Build Tack and my prints come out great. Plus when the bed cools, the print literally releases from the bed.

@kirstensanford5949 6 лет назад

If you use hair spray on the glass does the first layer still come out shiny?

@AlbertoMartinez765 6 лет назад

YEP!

@charliebowen4232 7 лет назад

Great video on a first timers point of view of the CR-10... It is my next printer! Where did you get the file for the drip coffee stand?

@dronecamps 7 лет назад

Thingiverse.com

@charliebowen4232 7 лет назад

Drone Camps RC - Thanks... Just a heads up... you will want to give credit to the designer that you got it from when you use a print from Thingiverse or Myminifactory... This is the link you can put in you description to get right to the print as well and a great place to give the credit to the designer.. www.thingiverse.com/thing:1670683

@dronecamps 7 лет назад

Ok thanks!

@Jorjito1989GDios 6 лет назад

Abs shrink when cold down so need same temp. All around with a enclosure and less fan not 100 but all depend on brand quality of the filament

@ObedTheBored 6 лет назад

Hey, can you tell me your profile of S3D for printing TPU? Im having a little bit of trouble printing with it, i would apreciate it so much

@dronecamps 6 лет назад

I just printed it using pla settings

@joeking1956 7 лет назад

Hair spray can also help your print stick to the glass bed. That is what they use at the local Makerspace.

@seandevine9846 7 лет назад

You should try printing in petg it has the strength of ABS with the flexibility of pla and it's much easier to print with non toxic fumes and is extremely shiny if you like shiny I do recommend you build an enclosure so that you can keep the temperatures to a uniform height as both PLA and abs will warp mid print if you have a breeze or air conditioner turning on

@floriangrey 7 лет назад

Sean Devine I want to clarify that PLA is the opposite of ABS. PLA needs to be cool. Try printing something without your extruder fan cooling the print. . ABS on the other hand needs an enclosure and has to be kept as warm as possible to prevent warping.

@jgibree66 6 лет назад

The pteg works really well

@consaka1 6 лет назад

yeah and I never use a fan with ABS.

@normcaissie5598 7 лет назад

Also no need for BT Hairspray on glass works awesome.

@DnBastard 6 лет назад

whole point of build tac is that you don't need any other adhesives. to be honest I get best results just printing straight onto glass. You gotta keep it super clean though I use rubbing alcohol for that.