Тёмный

Best Air Powered Lift Table For Lawn Mower, Small Engine, Trike, 4 Wheeler & Motorcycle Lift Table 

Individualized Repair Inc
Подписаться 20 тыс.
Просмотров 1,7 тыс.
50% 1

Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com...
This video offers an honest review of the Handy B.O.B. 1500 Lift Table.
The presenter dives deep into the features and benefits of this innovative lift table, showcasing its unique design and highlighting how it can simplify maintenance tasks.
Is the B.O.B. 1500 right for you? Watch before making a purchase.
Whether you're a DIY enthusiast or a professional mechanic, this review provides valuable insights that are sure to interest you
Don't miss out on this video is you are in the market for a motorcycle, four 4 wheeler, trike, zero turn, riding lawn mower or equipment lift table
We purchased ours at www.mile-x.com
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#handy #lifttable #motorcyclelift #4wheelerlift #mowerlift #pneumaticlift #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.

Опубликовано:

 

11 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 26   
@KSMike1
@KSMike1 3 месяца назад
Great review! People who have back problems don’t have to be told; people who don’t have back problems would do well to heed your advice. It’s a pain that you don’t want to have to deal with, folks!
@IndRepair
@IndRepair 3 месяца назад
I appreciate that! You are spot on there!
@garysgarage3669
@garysgarage3669 3 месяца назад
great review, thank you.
@IndRepair
@IndRepair 3 месяца назад
Thanks for watching Gary!
@Rein_Ciarfella
@Rein_Ciarfella 3 месяца назад
I have a ruptured L5-S1 - over 20 years now. You learn to live with the pain. 😉
@IndRepair
@IndRepair 3 месяца назад
Exactly where the crack in my vertebrae is. They told me I would never be pain free without surgery 12 years ago. They just push pills and surgery around here. No thanks! Sometimes I go months with what I would call pain free, even though it isn't. Long as you can tolerate it don't let em cut you open. Lastly definitely don't fall for the legal dope they want to give you
@philliphall5198
@philliphall5198 3 месяца назад
It’s a must to have several water separations units, rust is terrible and I add a tad of oil every week to mine lift tables
@IndRepair
@IndRepair 3 месяца назад
I run oil in my pump a little high so always oil in the lines lol had my dewalt compressor almost 15 years not a spec of rust in the tank and not one issue with it. We drain the tank twice a week, during heat of summer every other day
@philliphall5198
@philliphall5198 3 месяца назад
I’m sure it great but I’m a Texans so I have the old gray one that I painted red because it’s pretty lololo Me and Tom have the same one 😊😊😊 If I buy other I might look at one, maybe 😮
@IndRepair
@IndRepair 3 месяца назад
Haha awesome stuff there!
@Rein_Ciarfella
@Rein_Ciarfella 3 месяца назад
I’m fond of saying I’ve never owned a tool I didn’t modify. I can see some aspects of that table I would have modified immediately. I know you’ve modified tools before, so the best advice I could give is, don’t wait until you get used to something you don’t like. Use it a couple times and if it doesn’t suit you, sleep on it and then start modifying. Warranty? Phooey! OSHA? Double phooey! 😂🔧👍
@IndRepair
@IndRepair 3 месяца назад
Definitely!
@philliphall5198
@philliphall5198 3 месяца назад
I see why it’s so very very important to take care of your back, back problems is always hurting mechanics and retiring and hurting 24/7 is hell but I love mechanics work ❤
@IndRepair
@IndRepair 3 месяца назад
Challenging some days but the good days make it worth it!
@kennethbutler7652
@kennethbutler7652 2 месяца назад
You are right I’ve been doing industrial maintenance for 15 years and small engine repair I’m 40 years old and my feet and back are screwd
@IndRepair
@IndRepair 2 месяца назад
@@kennethbutler7652 I did it the hard way for a lot of years just like you, trying to do it smarter now!
@kc9146
@kc9146 3 месяца назад
I have 2 Heftee 4000’s in my shop…. Once you try those, you’ll never go back to a table!
@IndRepair
@IndRepair 3 месяца назад
Yeah, I have looked at them numerous times but for the equipment we work on not sure it makes sense to spend that kind of money on it. They do look amazing though just cant justify it right now. Seems like the setup for switching to different mower sizes takes quite a bit of time also?
@fartsackjack7081
@fartsackjack7081 3 месяца назад
i know a guy cld buid u new ramps just a lil bit wider ....
@IndRepair
@IndRepair 3 месяца назад
Didn't think about that but an awesome idea!
@fartsackjack7081
@fartsackjack7081 3 месяца назад
@@IndRepair and also ...after i watched the whole thing ...will the wider ramps from other table work ....that wld be slick ...LOL very sweet lookin table ....
@IndRepair
@IndRepair 3 месяца назад
Yeah I love it so far
@philliphall5198
@philliphall5198 3 месяца назад
Plastic wheels is a no no for me period
@IndRepair
@IndRepair 3 месяца назад
@@philliphall5198 Yeah, I thought the same thing but didn't want to spring for the larger one last time. Wasn't the wheels that were the issue so much as the clamp put on to hold them. Snapped off and let the wheel fall down. They have roller bearings inside and are made well, so there is that at least
@philliphall5198
@philliphall5198 3 месяца назад
Someone took my ramp to mine I guess for scrap metal ??? Sorry sob
@IndRepair
@IndRepair 3 месяца назад
That is BS sorry SOB for sure!
Далее
Making Universal Hydraulic Lift Table
20:05
Просмотров 359 тыс.
I Finally Got A Motorcycle Lift / Freddy's Back!
14:18
2200lbs Electric/Hydraulic ATV UTV Lift Table!
22:18
Просмотров 4,6 тыс.
Generator Engine Locked Up After 1 Year - Fixed
2:08:24
Просмотров 160 тыс.