Best Dremel Tool: RYOBI or DREMEL? RYOBI PBLRT01 HP 18V Rotary Tool Station Review

Подписаться 163 тыс.

Просмотров 95 тыс.

50% 1

When it comes to rotary tools, Dremel has definitely set a name for itself. The new RYOBI PBLRT01 Rotary Tool is claiming to meet the performance of the best and offer additional features. There's no doubt that having a cordless workstation will definitely make some jobs much easier. Rather than bringing your work to the work bench, you can take your rotary tool to the job. We compare the RYOBI rotary to the Dremel 9100 Fortiflex rotary tool. Both the Dremel and the RYOBI are shaft-driven. Of course, the dremel is powered by a standard 120V cord/plug, while the RYOBI HP is powered from the 18V One+ battery platform.
#ryobination #dremel #tools
Dremel 9100 Fortiflex: amzn.to/3CF8R1Z
RYOBI PBLRT01B (Tool Only): homedepot.sjv....
RYOBI PBLRT01K1 Kit with Foot Pedal: homedepot.sjv....
Keep current with our great content:
Facebook: / shoptoolreviews
Twitter: / shoptoolreviews
Instagram: / shoptoolreviews
RU-vid: / shoptoolreviews

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@theidahodian4518 2 года назад

I know first hand the importance of matching the rod caps with the rods. I rebuilt a 1966 Dodge 318 engine back in 1975. When putting it back together I started putting the rods in, matching the numbers stamped on the caps with the correct pistons. After it was all back together, the engine would not turn over either with the starter or by trying to push start it. When I removed the oil pan, I discovered what I did wrong; when I put in the rod and cap for cylinder 3, I incorrectly used cap 8. The stamping was slightly bent so it looked like a 3 but it was actually an 8. By the time I got to the last rod, (number 8) there was only 1 cap left so I didn't even check the number, which was actually stamped 3. Swapping the two rod caps was enough to lock up my engine. By the way, nice video. Liked and Subscribed.

@Tigris_River_Sand_Fleas 10 дней назад

Nice story. What does that have anything to do with Dremel or Ryobi?

@theidahodian4518 10 дней назад

It's been 2 years but I think he talks about rods and bearings. See the piston and rod on his bench. Either that or I replied to the wrong video. @@Tigris_River_Sand_Fleas

@gregbenwell6173 Год назад

I owned the Ryobi shown in this video, as well as a Dremel (without the shaft) and a Craftsman Rotary Tool, that sold at Sears in 1987, which again doesn't have the shaft drive on it. Between the three units I own the Sears Rotary Tool is probably the most powerful and way more used to the three!! And while I do use my actual Dremel, for certain projects like heavy sanding applications, I find the Ryobi is a bit under powered of the three!! But that is sort of why I bought it though! Because the main use of the Ryobi, which is the only one I own that has the shaft drive on it, I bought to do work with electronics where I need to get into tight spaces and work with more delicate parts!!

@jonnyjaywalk 2 года назад

Just picked mine up for rc model work. Love it so far and ryobi days at Home Depot. It’s free after buying a 3 battery pack combo. End June 8

@greggbrown0 Год назад

I am a Master Jeweler , I have used The Foredom rotary tool since 1982 never had a problem. Dremel tool is no comparison.

@FatLittleOldLady Год назад

Never heard of Foredom before. When I queried rotary tools in the past, no mention was made of it. Industry's best kept secret it sounds to me. You have piqued my curiosity. Thanks. I have Dremel 4300 with the big blue box. Got one for my neighbor, too. Druggies stole his tools. All of the tools he gathered in his whole life so my boyfriend and me have been buying him replacements a little at a time because he is in his 60's. That could kill a man. You know?

@MrIgottap 8 месяцев назад

@@FatLittleOldLadyyou are awesome neighbors looking out for him like that. Keep up the good work!

@FatLittleOldLady 8 месяцев назад

@@MrIgottap Thanks. We try.

@ManCaverTools 2 года назад

thats awesome that Ryobi sent both.

@hgodtx 2 года назад

That was a seriously thorough review! Very helpful! I need a review of that Ryobi with the flex shaft vs the Ryobi where the motor is in the hand tool itself.

@legallyfree2955 Год назад

I have a flex shaft and a rotary tool of the type where the battery and motor is all in the tool, the narrower handle of the flex shaft is a lot more comfortable to hold for a long time sitting down polishing something, the all in one tool is a lot less cumbersome if your walking around and doing things here and there especially if its in a position where you would have to hold the motor base in one hand and the tool in the other like if your standing up outside. It depends what you see yourself doing most as to what would be most suitable, or you could splash out, buy both, and use the most suitable for the situation like I did.

@badgermcbadger1968 Год назад

@@legallyfree2955 are they both equally powerful?

@legallyfree2955 Год назад

@@badgermcbadger1968 Not for the two I happen to have, the corded one without the flex shaft is more powerful, but they are totally different brands I know you can get powerful flex shaft ones if you want, Dremel makes a hang up one that is supposed to be powerful and you also have Foredom's unit if power is a concern. Both of mine are adequately powerful though.

@searchandsave142 Год назад

Wish more tool such as these operated in both Battery as well as AC Gaining the best of both worlds

@peterkatznelson12 Год назад

The beauty of the foot pedal is that it adjusts the speed interactively.🙏🏻

@txmexnittro 2 года назад

Great video Home Depot has by 3 batteries get this bad boy FOR FREE! I just picked it up

@glbernini0 Месяц назад

Well done review, didn't even know Ryobi made tools like that.

@ryobiguydiy 2 года назад

Ryobi has been producing some great tools. I just wish they would have made it a hybrid tool.

@paulyang748 2 года назад

I agree, they need more hybrids. Their shop vac needs to be hybrid also. It would be sweet!!!

@ryobiguydiy 2 года назад

@@paulyang748 I agree %100! I’ve thought the same thing. I have both the 3 and 6 gallon shop vacs. It would be a game changer if it were a hybrid.

@davidguenther8170 2 года назад

I have a couple of Ryobi 9" fans that are hybrids. They're great, although with a 4ah battery, they will run on high for several hours and all day on low speed.

@ryobiguydiy 2 года назад

@@davidguenther8170 Same here. I now have the Hybrid Air Cannon for my garage gym. That’s been extremely convenient!

@dangerous8333 2 года назад

They've certainly been developing some interesting tools. They aren't GREAT tools though. They would never last for anything more than occasional homeowner work.

@jaredappleseed7037 2 года назад

I've seen cordless mag drills so it should be possible but a vice with an electromagnet would be awesome paired with this thing for less trips to the shop at work

@Shoptoolreviews 2 года назад

Yes!! We'd love to see that too. Sounds like a project. Thanks for watching.

@BluetoothBlades Год назад

Is there a 110v adapter that plugs into the battery compartment available for this rotary tool ? That would be a HUGE selling point for Ryobi.

@thebigdoghimself 2 года назад

I have the Milwaukke M12 handheld version of the Dremel. I like it and have been very happy with it but this Ryobi is very slick.

@Shoptoolreviews 2 года назад

Yes, we use the M12 rotary a lot in the shop as well, but this Ryobi really is a different beast, with much more power. Thanks for watching.

@bread-gz3rl 2 года назад

Does it have the HP terminals? Edit: Wait I'm blind it doesn't

@DavidLee-cw6ci 4 дня назад

I'm considering this as I'm sick of the cord on my Dremel.

@sklise1 2 года назад

awesome video. I invested in the 18v batteries. Great marketing from them. More use cases for that 18v invetment.

@Shoptoolreviews 2 года назад

You are correct. Even more tools for the 18V platform. Thanks for watching.

@melastname6548 11 месяцев назад

I’ve used hf mini grinder w flexible shaft for several years. Trying to decide between this ryobi or milwaukees new brushless rotary tool. I like that ryobi handle is much smaller than the direct drive versions. But I agree w sum1 else’s comment, I think it’s a huge oversight not having ac power as well. I have stuff on both platforms

@davidguenther8170 2 года назад

Dremel is a ubiquitous name for same products, same as "sawzall" and "skilsaw" because Milwaukee and Skil were the first manufacturers of these tools. Seems like this was basically a shill video for Ryobi. Although you did say they both were good tools, you didn't really give a true side by side comparison, ie., the Ryobi with the cutting wheel and the Dremel with the cutting wheel to see which one cut faster than the other, ect. Other than that, a good review of the Ryobi tool.

@baseballdude8491 2 года назад

Milwaukee is good for some things but too big for detail work I picked up the Worx maker system that is cordless but also has other tools for the same adapter-I rotary tool, glue gun, small heat gun, grinder/cutoff, detail sprayer and solder Really good size compared to many

@JeffDM 2 года назад

I don't know if it helps but the Milwaukee rotary tool can use a Dremel flex shaft.

@donovanraaum3259 Год назад

Great video, I'm looking forward to trying mine this weekend

@piousminion7822 2 года назад

It's missing "1" feature to make it perfect. Support for wall power like the ryobi soldering station has. :/

@duhzeez7462 11 месяцев назад

A year later and Ryobi still does not offer the flex shaft or the handle separately...SMH

@coralreefer23 2 года назад

Wish the Ryobi was a hybrid, allowing for 120v plug in. I use all tool brands, as no company makes the best of everything. These Milwaukee fan boys are too much. You know it's the same China parent company don't you? Ya ryobi is diy level but they make some stuff that others just don't. Get over it. M12 is heavy and bulky/thick for detail work.

@dangerous8333 2 года назад

Lmfao 😂 Milwaukee = Professional grade tools. Ryobi = Occasional use. You can split hairs however you want but I think it's you that needs to get over it...or just simply accept it. I'm a Milwaukee fan, and if I need a tool that will get used often and hard, I'm not buying Ryobi. But I am buying this rotary tool from Ryobi, because it will be for occasional use and checks all the boxes. But I can still be honest about things.

@scrapyardprospecting3855 Год назад

Get a battery adapter or make on out of a old battery I did for my tools works fine.

@Ferrous_Bueller Год назад

I thought the same thing, but now that I have hundreds of hours on it that’s no longer the case. I’m getting 5 hours worth of power carving out of a 4ah battery, and like most Ryobi ecosystem owners I’m sitting on a pile of them.

@rgarciap7 Год назад

120v ties you up to an outlet. Ryobi batteries are so reliable and last for years. I had never had a battery turn bad for more than 5 years.

@Wildland_Firefighter Год назад

Metabo has the cordless tools that use a 36v ac/DC hook up

@MrMech-oj7iy 2 месяца назад

I have to ask. Why do you have a flywheel and torque wrench hanging on the wall? Also, why astro turf on the wall? Thanks for the info.

@carterscustomrods 2 года назад

Bosch 12v FTW!!

@TheRoadDawg 5 месяцев назад

I like what you do, but I’m only looking for facts, performance, and your final thoughts. You ramble quite a bit which makes the videos unnecessarily longer. Not trying to be negative, just constructive criticism if you will. The side stories and all could be cut out to make this just about the tools and comparisons. Kindest regards and I hope you take it in a positive way, as intended. Keep up the great work my friend. PS. I did give a Like as it was full of useful information!

@edsonxavier2825 Год назад

Try to find a inner flexshaft cable replacement for it. There isn't a replacement cable for it.

@josephabaddi8226 Год назад

How does the new ryobi compare to the older model P460 ?

@JoelHunterGun Год назад

Thanks for such a fair assessment!

@JeffDM 2 года назад

Thanks for the review. I'm interested but not sure just yet. Did you ever get the foot pedal?

@GTRliffe Год назад

The heavy dremel handle is a benefit NOT a negative

@alsmith7316 Год назад

Do you know if Foredom handpieces fit on this shaft?

@IanChampion 2 года назад

Is there a way to buy the foot pedal separately if you get the tool only kit? Can you buy separate handle/chucks to swap as shown in the video?

@6atlantis Год назад

You can buy the foot pedal separately

@theincredulousrgp6219 Год назад

Where? I can't find it on amazon.

@celeronceleron5595 Год назад

Since the Dremel, or what'd you say, Fordham, is the original I was wondering if the flex shafts and handles are interchangeable between brands.

@IrelandLover 14 дней назад

They usually are

@Julio-cj7sf 5 месяцев назад

Another nice job. Thank you.

@ef2967 Год назад

Should also compare a Foredom to these.

@julianchavez4598 Год назад

I'm new to first time owning a rotory tool but I got mine today and I loosen the chuck and it still can't slide in the bit ?

@jed-henrywitkowski6470 Год назад

I'm a Dremel fan, however, the form factor of the Ryobi power head seems to be more user friendly than that of the Dremel.

@keykey1401 2 года назад

Which one would you use for carving hard materials as Agates?

@richardbertrand8895 2 года назад

Thanks For The Info, Good To Know

@richardbertrand8895 2 года назад

Just One Good Question On The Dremel End, Will Fit On The Ryobi Tool Also Being A Quick Disconnect. That Would Be Cool If It Did. I Do Like The Two Styles Of End.

@davidguenther8170 2 года назад

I know that some Ryobi cordless accessories swap out with Ridgid cordless accessories. I have both a cordless 12v Ridgid oscillating tool and Ryobi 18v oscillating tool and the different heads, ie., jigsaw head, right angle drill head, ect. swap between tools. Maybe that's because they are both made by the same manufacturer.

@beatsbyjules. 2 года назад

It doesn’t come with a router attachment so I’m torn between this and their cordless 12v rotary tool

@creeplife2802 2 года назад

Ryobi should've killed Drexel and made a bluetooth foot pedal💯🔥🔥🔥🔥🔫

@Shoptoolreviews 2 года назад

Yes, that would be awesome. Like the newer welders with wireless foot controls. Agreed. Thanks for watching.

@joshuapreusser2265 2 года назад

could be an option later(?) with a simple plugin dongle to connect a wireless foot pedal. Personally I prefer a cord (and a shielded one at that -if I only had to choose one) since I occasionally seem to get some EM interference that makes wireless devices act .....odd. Never really sure if it's a byproduct of government/military testing (rather large installation in the region) - or some engineer goofing around on their own time.

@timcoulson7340 2 года назад

Drexel Spivey? Clarence Worley killed him in Detroit back in '93.

@davidcampbell2845 2 года назад

Good review. Very helpful.

@Shoptoolreviews 2 года назад

Thank you very much.

@geraldlapointe3108 2 года назад

Deal is still going, or again ... I picked mine up at store after ordering online

@theincredulousrgp6219 Год назад

Where can I get the pedal for the Ryobi?

@justsomedudeontheinternet Год назад

I wouldn't necessarily trust RYOBI sending you their competitors' model. Who knows if that is a good representation of the dremel model and not a sub par device.

@The52brandon Год назад

Those are really flex shafts (foredom is probably the best known), not rotary tools (dremels)

@rdeh1678 2 года назад

I use mine in a detailing vehicle business

@stinglovingyou Год назад

Wonder if Milwaukee plans to lounch a rotary station like this. all my wireless tools are Milwaukee and would be great to have a tool only option and save in batteries

@Shoptoolreviews Год назад

I doubt they will. Milwaukee definitely sticks to Professional tools, and this is mostly geared to the consumer/DIY. Not that some professionals don't use Dremel/Rotary tools, but it's just not used a lot. Thanks for watching.

@Psmooth87 2 года назад

Where can I find the foot pedal solo?

@GTRliffe Год назад

The Dremel is superior Ryobi has many quality downsides that aren’t mentioned By the Dremel-unless you work onsite!

@kennethanderson7642 9 месяцев назад

Everyone would benefit if you'd like to share those quality downsides. Direct Tools has had the Ryobi kit here with pedal and battery for under $75 on sale, so it might still be suitable for some.

@BenVanAmburg 2 года назад

Wish Milwaukee made one or I'd own it already.

@carterscustomrods 2 года назад

They have the 12v, and it's imo, the 2nd best cordless rotary tool.

@mrniusi11 2 года назад

There is an Australian that made a high end solder station adapter for M18. It may not be far off to just use a battery adapter for this.

@audionut9974 Год назад

@@carterscustomrods 12v one is gutless

@audionut9974 Год назад

just buy ryobi

@carterscustomrods Год назад

@@audionut9974 lmao

@edmills12 2 года назад

Just bought TOOL ONLY at Home Depot for $149.00

@AndriBatuah 2 года назад

Next video, maybe you can review KRISBOW from indonesia.

@Shoptoolreviews 2 года назад

Never seen or used that one. Maybe you can put them in touch with us or give us a contact. Thanks for watching.

@AndriBatuah 2 года назад

@@Shoptoolreviews this broo, Krisbow brand from indonesia. You can try.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DUw2W7YkXws.html

@TheUpsetter 27 дней назад

How long does the charge last??

@Shoptoolreviews 27 дней назад

A loooong time with this tool. 4Ah battery should last hours.

@gusf8451 2 года назад

thumb down, this is not a comparison video it's a Ryobi marketing video , you did not show the dremel in action

@dangerous8333 2 года назад

Word of advice. Stay away from any channel that has "review" in the name. Go find actual tradesman and Craftsman working with it and talking about their experience with it. These guys just practically read off the product description page.

@alfredocuomo1546 8 месяцев назад

Sorry but you left out the number one real rotary tool which is the Foredom rotary tool which Dremel tried real hard to copy especially the head change feature. These are tools with 1/6th to 1/3 horse power motors able to use 1/4" drive die grinder accessories.

@renepina4566 5 месяцев назад

roybal best that I have one weeds eater

@searchandsave142 Год назад

Thank you and Informative but they don’t compare

@kc0lif 2 года назад

nice tools

@JohnLennon-yg4ut Месяц назад

Only 25000 rpm’s? they have 35,000 one that’s the best one

@henrysscrollsawworks6917 2 года назад

If was going pay that much I would rather get a fordem

@Myaccisbanned Год назад

This must be the old version of ryobi, the new one looks much sleeker

@OceanBeachBoy Год назад

This is the brushless version, the other versions are not as powerful and more limited

@timcoulson7340 2 года назад

According to a chat CSR at Ryobi, a foot pedal is not available for this tool.

@Shoptoolreviews 2 года назад

Sometimes they need to educate their support staff. Here's a link to the kit that includes the foot pedal with it. This was not available when I made the video. Thanks for watching and asking the question. homedepot.sjv.io/Ao5nnK

@timcoulson7340 2 года назад

The Home Depot link description states the foot pedal is not included. Fifth bullet down: "Added control with foot pedal capability (not included)"

@randybobandy9828 2 года назад

@@timcoulson7340 not included doesn't mean not available... they just sell it separately.

@instuller 2 года назад

@@randybobandy9828 yet no part number for it- its not out. It is ONLY in the kit with the battery. I would hope at some point it’s available, but when is anyones guess.

@dangerous8333 2 года назад

@@randybobandy9828 Comprehension is gold.

@henrysmifth536 2 года назад

👍👍👍👍👍

@chaseybears Год назад

Foot pedal? Pedal means foot operated lever....its a pedal. If you use your hand its a lever!

@michaelfisher9262 Год назад

half hour, really!!!!

@colinoreilly5438 Год назад

Just buy a foredom / buy once

@connecticuttutiempohallega6964 Год назад

why are u wearing globes?

@nicky85926 Год назад

Why does it matter 🤷‍♂️

@davidsalman8362 Год назад

a Shitty Product with a Shitty and Dead Customer Support, i Kept Emailing them for more than a Month trying to get the Dimensions of the inner Flexible Cable cause mine Snapped, i still don't know the Diameter of it, i dare anyone reading this to find one Online cause i kept Searching with no luck

@Aikano9 Год назад

You can cut it open and check for yourself with some calipers if it’s still broken and support hasn’t given you support yet

@lilyanimate7266 2 года назад

a flex shaft with a cordless whats the point? then again this guy that needs gloves just to pick up a tool obviously doesnt know what he is talking about

@Shoptoolreviews 2 года назад

You got us! We have no idea what we're doing. Thanks for exposing the organization.

@randybobandy9828 2 года назад

The point is to be portable... this isn't a hard concept. Lmao. If it didn't have the "cord" it would be a massively thick unit that wouldn't be good for detail work. It also wouldn't make sense for the one+ 18v battery.

@dangerous8333 2 года назад

@@Shoptoolreviews Most tool review guys don't. They usually just talk about the same things you can read in the product description.

@dangerous8333 2 года назад

@@randybobandy9828 You again? You really do have a problem with comprehension. He's not comparing it to a corded one. He's comparing it to the other cordless ones. That's what makes them "portable". What you describe after that is "maneuverability". No one is discussing maneuverability. Not everyone needs to get their hand into weird locations so the maneuverable part isn't as important as the portable part.

@randybobandy9828 2 года назад

@Dan Gerous oh you mean the cordless ones that are about as fat as a soda can? Ya.. real useful for detailed work, you absolute simpleton.

@edwins2595 Год назад

While this joker was very vociferous he didn't tell us what is very important, the horsepower of the units.

@CoKanet-no2jt Год назад

Damn going to home depot tomorrow to spend 300 doll hairs for 3 batt rays hp 1+ a jig saw and this

@nomercyinc6783 2 года назад

Ryobi is a hobby tool level of a company. I’ll stick with hard working tools in Milwaukee and Matco. Oh for dremel, original is always best.

@IanChampion 2 года назад

Ryobi makes the best pneumatic tools with airstrike. Each company has their strengths.

@nomercyinc6783 2 года назад

@@IanChampion ryobi doesn’t make the best air tools, that’s a joke

@randybobandy9828 2 года назад

@NoMercyInc yes their air strike battery nailers are very...very good. They performed better than their milwaukee counterparts. That was a couple years ago and I think milwaukee has come out with never models. Don't be such a fanboy..fan boy.... it makes you look silly.

@nomercyinc6783 2 года назад

@@randybobandy9828 air tools, meaning not air hammers or nailers, is not an air tool I was referring to. I’d never buy a ryobi air impact

@dangerous8333 2 года назад

@@IanChampion 😂 Yeah, ok.

@robertoamaro5352 Год назад

I'm new to Dremels, but this thing has been great. ru-vid.comUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.

@Tigris_River_Sand_Fleas 10 дней назад

You are pronouncing Ryobi incorrectly. Unless dozens of people that Ryobi have all been purposefully mispronouncing it for over 30 years of my life on the phone.

@YusTus-h9s Год назад

WORX ALL THE WAY SPEED AND POWER !!!!! AND BEST OF ALL SMALL SIZE

@Pro1er Год назад

I have no idea why anyone would buy a Worx tool, besides being over-priced their replacement parts are outrageously over-priced as are their batteries.

@YusTus-h9s Год назад

@@Pro1er i got frikn tired of waiting for the MAKITA 18v dust/pc blower ... will not buy the 24v blower the WORX hand held mini blower works great I have the Makita ANGLE grinder ... but it is TOO BIG for little mini projects LOVE the mini WORX angle grinder LADIES ... SIZE DOES MATTER !!! AND SOMETIMES SMALLER IS BETTER!!!! BUT YEAH OVERALL THE PRICE OF THE WORX SET COST JUST AS MUCH AS A MILWAUKEE AND MAKITA ...SHEESH AT ALL THESE TOOLS BATTERIES$$$ !!!!

@Pro1er Год назад

@@YusTus-h9s Understood, but they do make a lot of Chinese Makita clones including the blower. I saw a Worx 20V 14-inch lawn mower the other day. It would probably be good for people who are mildly disabled but want to stat active or if you have a postage stamp size lot, but they want $47 for a replacement blade - that's insane for a 14" blade!

@TheDickDangler 8 месяцев назад

Obviously a biased review since Ryobi sent you all some free gear. . . Why not just give the correct and accurate numbers?? You try saying the Ryobi runs faster at 25,000 rpm and you say the Dremel runs at two thousand rpm slower at 23,000 rpm, the action number for the Dremel is 35,000 rpm.. variable speed. . . Zero to thirty five thousand rpm. I guess that would have blown the Ryobi's numbers out of the water but it's battery powered and the Dremel isn't. . . It's not fair to compare