Best Flex Head Ratchet? Let’s settle this!

Подписаться 3,2 млн

Просмотров 721 тыс.

50% 1

Snap On, ICON, MacTools, GearWrench 90 and 120, Olsa Tools, Craftsman, Duratech, DeWalt, Crescent, Tekton, Wera, Stahlwille, Nepros, Proto, Kobalt. All 3/8 ratchets tested until failure. Ratchets compared for working arc swing, back drag, handle to ratchet head slop, and directional switch force to change directions.
I bought all of the ratchets and all of the supplies used to test the ratchets to ensure an unbiased review. So, thank you for supporting the channel.
➡ Thank you for supporting the channel through memberships:
/ @projectfarm
➡ Thank you very much for supporting the channel through Patreon: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: project-farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Olsa Tools: amzn.to/44SK205
Craftsman: amzn.to/43EoEtN
GearWrench 90: amzn.to/3KbrKyO
GearWrench 120XP: amzn.to/43DEZPl
Duratech: amzn.to/3YkWZxf
DeWalt: amzn.to/3Y3rdEw
Crescent: amzn.to/3OpFaJW
Tekton: amzn.to/3O8TLYU
Wera: amzn.to/44ENZFt
Stahlwille: amzn.to/3Y78urQ
Nepros: amzn.to/3OnGtsJ
Proto: amzn.to/3rIypdr
Kobalt Model #81747: Available at Lowes
MacTools: Available online at the MacTools store
Snap On: Available online at the Snap On store
ICON: Available at Harbor Freight
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Хобби

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 4,9 тыс.

@craiger711 6 месяцев назад

I am so happy to hear that manufactures are reaching out to make improvements. never stop doing these!

@ProjectFarm 6 месяцев назад

Thanks!

@Semajal 6 месяцев назад

Yeah so glad! I trust these reviews more than anything else, it's so good knowing he buys everything himself too. Even if they say they are impartial I really struggle when a review starts with "Thanks to X company for sending this thing to me"

@InLineDiesel6 6 месяцев назад

They would be fools if they didn't with a subscriber base of of over 3 million and episode views exceeding that. If I was a tool maker I'd be reaching out.

@thecommonsenseconservative5576 6 месяцев назад

I've been waiting for the day that they started to

@Dhrpedro 6 месяцев назад

Ik zou de vergelijkende testresultaten van de fabrikanten zelf wel eens willen zien, en of ze hierdoor ook hun productieproces gaan verbeteren.

@natep1661 6 месяцев назад

Don't ever buy anything without checking PF 1st.

@aaronthomas6155 Месяц назад

I don't....

@roninbushito Месяц назад

@hondaboi8195 18 дней назад

or do your own research...

@hypnotiq 9 дней назад

@@hondaboi8195 what do you think searching for other people's reviews is..... or do you expect him to go buy every ratchet he can & do the tests himself? absolute goober

@hondaboi8195 9 дней назад

@@hypnotiq no but dont get your whole opinion from one guy, do your reserach go talk on forums to get other people povs not relying on one guy, he isnt goona review everything in the world, youre not goona wait for him to review a particular thing to get it, what if he never does a review on it are you never goona buy it just cause he didnt review it? no you do your own research and find out if its worth buying it or not.

@kaboom362 6 месяцев назад

Having used flex head ratchets in tight clearance areas, I think the direction switch tightness is a good thing. It can minimize unwanted switching.

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@jamesfarmer1523 6 месяцев назад

Exactly that the issue I've had with kobalt ratchets.

@Larrybird1980 6 месяцев назад

Uh it’s 12:07 pm and no new video. I demand a refund.

@rcannon409 6 месяцев назад

I agree with you. I have an older snap on ratchet and it's way too easy to switch directions with.

@kaboom362 6 месяцев назад

@@rcannon409 You can change the gears. It's easy. They get worn down a bit. Especially when you use the ratchet to break bolts free. Get the snap on truck to warranty it. He will probably do it for you on his truck.

@alaskajon195 6 месяцев назад

'Snap On snapped off' never gets old.

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@aaronthomas6155 Месяц назад

never stops happening either...

@richardmahoney4531 28 дней назад

Snap On loosing the girlie calanders, the looser CEOs, and licensing to costco had nothing to do with it ..

@ZzzRoofus 6 месяцев назад

This is one of the few channels that holds manufacturers accountable for their products. That's why they reach out and it's good to hear you're one of the few people in this world actually making a difference for everyone on a large scale. Thanks for everything you do.

@ProjectFarm 6 месяцев назад

No problem!

@rico76 6 месяцев назад

This! He deserves to hear this every time.

@ianmoon1103 6 месяцев назад

Canned spray foam? Adhesion Dry time Insulation effectiveness

@delvinishman77 2 месяца назад

@@ProjectFarm @Matco & @CornWell

@bigboreracing356 9 дней назад

Manufacturers dont have to be held accountable for their tools when the junk cost less than a case of beer and carton of cigarettes. These type of people are not intelligent enough to realize that a high quality tool will last for generations when used with common sense. They will still last 40years when not maintained and used with cheater pipes. If you have thick feels then watch my 40 year old ICON vs Snap On review. You will see that this channel caters to the people my video is meant to educate.

@johnmccracken6497 6 месяцев назад

I love how you keep your videos "mean and clean". Straightforward without fluff. And I appreciate how you refrain from editorializing all the time.

@ProjectFarm 6 месяцев назад

Thanks!

@stco2426 6 месяцев назад

So true, but I like the quips; 'happy to snappy' here, I think.

@user-ii5lc3hh5t 6 месяцев назад

Dude. How cool is that? You have manufacturers reaching out to you in order to see how they can improve. Todd, you are invaluable Sir. Thank you for the videos. This channel is legit my go to 🙏🏼

@ProjectFarm 6 месяцев назад

Thanks!

@marconiandcheese7258 6 месяцев назад

Thank you for including tekton. For someone who lives in Alaska, their warranty process (only requiring photos for replacement) is great at saving money on shipping.

@ProjectFarm 6 месяцев назад

You are welcome!

@bigfuzzy84 6 месяцев назад

The fact that tool makers contact you and reference your channel is a huge compliment. With people working together, we can seriously make so many things better for everyone.

@ProjectFarm 6 месяцев назад

Good Point!

@xaphan8581 6 месяцев назад

They don’t have a choice. Channels like this have a big impact on what people buy.

@bigtrev333 6 месяцев назад

@@xaphan8581They absolutely have a choice. Case in point - Lockpicking Lawyer & Master Lock.

@MTGeomancer 6 месяцев назад

Oh, they reach out all right. But it's to offer marketing opportunities (we'll pay you to feature our product and parrot these talking points) and non-committal statements (ie: I've passed your results onto our engineering team so they can use it to further improve our products. We always stand behind our tools 100%!). I doubt any make any product improvements unless it results in a lower manufacturing cost. The only time I'd see a manufacturer actually changing their product would be the occasional independent companies that make it into the videos. Certainly not Snap On, Dewalt, Milwaukee, Stanley, Harbor Freight, and so on with the soulless corporations. Thankfully he ignores the marketing offers.

@CorvetteTrev 6 месяцев назад

Sometimes it changes the market! A price can go way up or way down is what usually happens.

@legend917906 6 месяцев назад

Something to note, even though it may be more difficult to change directions with a greasy finger... If you're pushed tight against something else, a harder directional switch is better. If the back of the ratchet is against a plastic panel, having it suddenly change from loosen to tighten can be an issue. So the force needed to change that being higher isn't necessarily a bad thing

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@EthanMcKee. 6 месяцев назад

I agree with that. I went straight to the comments to write something similar to what you already said haha.

@EthanMcKee. 6 месяцев назад

I have a couple 1/2 drive craftsman ratchets and if a gust of wind blows that ratchet will change direction

@NatesHomeTours 6 месяцев назад

That was my comment also, but using my hand to hold it on the bolt or nut when upside down.

@scotty305 6 месяцев назад

That's exactly what I was thinking, I've accidentally changed the direction lever on my socket wrench quite a few times.

@adamhucker1758 17 дней назад

I own two of those Kobalt ratchets. A 3/8" and that 1/2". I have already warranted the 1/2 with the original receipt and Lowes took all my drivers license info and were rude about it. I bought both ratchets last fall. Lowes convinced me to buy my tools anywhere else and Kobalt taught me to be any other tools. Icon here I come.

@ProjectFarm 17 дней назад

Thanks for sharing.

@Ripped677 6 месяцев назад

Wow, ICON really stepped up their game in the market. Good to see the flagship of harbor freight hanging in there with the expensive stuff at a 1/4 of the price

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@c.shoefish 4 месяца назад

Icon tools are actually pretty awesome. Due to some theft, my personal box and it's contents were stolen and I needed to rebuild and went with an icon line up of tools (not all, but most) and I have nothing but positive things to say. I broke a set of pliers and took it back to HF for an exchange and got a new one, no questions asked.

@fanofbama14 4 месяца назад

@@c.shoefishI’m a weekend warrior so I can’t justify the cost of Snap On. That being said, I love the ICON line of tools! They have been great to me!

@luisillo1987 6 месяцев назад

I love the ratchet episodes.

@ProjectFarm 6 месяцев назад

Thank you and hope you enjoy the video!

@sasquatchrosefarts 6 месяцев назад

@@ProjectFarmnew ratchets have grease stuck in the teeth so you can't check backdrag until you rotate it both directions slowly , and then reverse direction to lock the pawl into the teeth grooves. To displaced the new ratchet grease.

@kennethhanes5438 6 месяцев назад

I know just wish they had Koken in the test

@LukeTheJoker 6 месяцев назад

Always impressed to see you breaking some high quality "Dream" tools to see their real limits.

@defaultdriftco00 6 месяцев назад

I break them at work😂

@ProjectFarm 6 месяцев назад

Thanks!

@GumbootsOnBackwards 6 месяцев назад

Right? Nothing I love more than seeing a Mac crack. 😂

@frbrbrgrblgrr7777 6 месяцев назад

The only Dream tools I see anymore are Snap On, SK and to some degree Olsa. Mac has long since fell off the boat and is more on par with what Matco peddles. Not shocked Snap-On wasn't the winning tool. I love their hand tools but they are out paced and at this point I purchase to support Pat the seller and nothing more. My final purchase will be an over priced ToolBox as a thank you for everything Pat has done for me.

@JamesJamersonIsAGod 6 месяцев назад

Agreed! Point of failure is also very nice to know, the ratchets failing at the 3/8 drive at a reasonably high torque value seems ideal. A 3/8 steel square of that cross section can only handle so much torque just based on geometry, you can maybe boost it a little with the alloy/heat treat but realistically they should all fail around the same spot torque wise. If I am trying to put 250-300 lbf-ft through my 3/8 ratchet then I’m already being a yahoo, hahahaha.

@tundras4ever552 6 месяцев назад

Been using my icon non stop for about 4 months now and its been absolutely fantastic! For the price plus the warranty you cant beat it.

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@7shelties 6 месяцев назад

⁠@@ProjectFarmFlare wrench comparison?

@reikasdad 6 месяцев назад

are you using any of the ICON torque wrenches? Thinking of picking up the ICON split beam 1/2"

@tundras4ever552 6 месяцев назад

@@reikasdad as a matter of fact I am! Torque about 15-20 car’s wheels per day. It’s a solid torque wrench. Again couldnt be happier with the price and quality

@reikasdad 6 месяцев назад

@@tundras4ever552 thanks for the response! I'm keeping my fingers crossed for a 20% off coupon for blk friday (I'm canadian, so I need the coupon to offset the currency). Like you, it will see pretty much the same amount of usage per day. Thanks again

@reyztec 6 месяцев назад

I'm pretty much sold on all ICON tools at this point. I've been using Pittsburgh Pro ratchets for 15ish years now and I still have a 1/2" flex head that's seen some shit. I've put 300ftlbs of torque on that bad boy dozens of times now and it's still kicking. I've started buying the icon equivalents and they are definitely just as tough if not more. Can't beat them in terms of bang for buck and these videos just keep proving it.

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@M--76 6 месяцев назад

It's not just the fact that carrying out these tests makes this channel amazing but simply having the creativity and mechanical aptitude to even think of these tests. Really a great channel!

@ProjectFarm 6 месяцев назад

Thanks!

@adollarshort1573 6 месяцев назад

Yes, just thinking up a test and then coming up with a measurable means to do it ....VERY IMPRESSIVE! And the amount of money spent!!...🫡

@MATTP545 6 месяцев назад

Exciting to hear the manufacturers take these types of review testing seriously. Customers are surely benefitting from your work. VERY IMPRESSIVE! Thanks again for another great one!

@ProjectFarm 6 месяцев назад

You are welcome!

@DeathValleyDazed 6 месяцев назад

Love your “VERY IMPRESSIVE” comment. I watch all of these videos even though I only use a fraction of the equipment that is tested.

@stevenpurvis6195 6 месяцев назад

I appreciate all the criteria you test. It allows end users to purchase based on their particular needs. I’ve been subscribed for years and I will always search your videos before buying something new. The double stick tape test has been the most useful to me. I use the winner frequently. Thanks again Todd.

@ProjectFarm 6 месяцев назад

You are welcome! Thanks for the feedback.

@polishtom 6 месяцев назад

I just started building up my tools collection, so I'm quite grateful for your videos. Thank you so very much for all the work you put into them.

@ProjectFarm 6 месяцев назад

You are welcome!

@bjblanchard1508 6 месяцев назад

When you have tool companies using you channels for research and development you know your doing it right keep up the great work love the videos

@ProjectFarm 6 месяцев назад

Thanks, will do!

@eoghanfla6343 6 месяцев назад

My favourite part of these videos, “we’re going to test that” Product developers world wide shudder and don’t know why!

@ProjectFarm 6 месяцев назад

Thank you very much!

@Sfhakrn 6 месяцев назад

Mine too!

@aaronthomas6155 Месяц назад

Oh no, they know why they're shuddering..... Because he's going to find their lies.

@jerrygeorgopolis8015 6 месяцев назад

Absolutely top notch testing ! Always amazed at the thoughtful presentations you have in your videos. Glad manufactures do see the Value in your testing !! All the best to you and your.

@ProjectFarm 6 месяцев назад

Thanks!

@omorin34 6 месяцев назад

Thank you. I love my GW 120 and 90. I love it when your teats confirm my opinion.

@cblade007 6 месяцев назад

That back drag test was my favorite part of the video. I would have never come up with a way to test that, but you did. That is crucial because in a tight situation, you can't get your hands in to hold the socket. Great job!

@iFixJunk 6 месяцев назад

This is always my least favorite part of using a ratchet! I've found myself with EVERY ratchet (fine AND coarse) having to compensate for this!!!

@ProjectFarm 6 месяцев назад

Thanks!

@Mac-td7lt 6 месяцев назад

Yep. I hate frikin backdragg

@captnhandy 6 месяцев назад

Great content as always. I picked up a 1/2, 3/8 and 1/4 set of Gearwrench 90T last year and they are absolutely fantastic. Just as described and tested by you.

@ProjectFarm 6 месяцев назад

Thanks!

@penguinsniper155 6 месяцев назад

Also picked that set up its great, got it for $130. Specifically the one with the rubber grips

@61espo 6 месяцев назад

Thank You very much again! These videos you make also make my life easier when considering what products to buy! Thank you so much for taking the time and doing the research to bring us these great product videos!

@mrnharvey1 3 месяца назад

Your work on tools and equipment is second to none, in evaluation and description. I have watched many of your videos and they are most excellent, thank you..👍

@ProjectFarm 3 месяца назад

Thanks so much!

@johnfitzgerald5158 6 месяцев назад

Great test. One thing I differ opinion on is the directional switch. I don't want it impossible to switch but I do want some good resistance. I can't stand when it switches direction too easily.

@dougrobinson8602 6 месяцев назад

I agree 100%. The only downside to a stiff switch is that they can occasionally tear a nitrile glove, but I can live with that over the frustration of accidentally switching direction in use. Can you say "knuckle buster"?

@ProjectFarm 6 месяцев назад

Thanks!

@dylanlatimer6745 6 месяцев назад

Would love to see ball peen dead blow hammers. I think 36oz is pretty standard. There's plenty of cheap Chinese brands, Tekton, Estwing, Eastwood, Harbor Freight, Trusty Cook, Snap On, etc. Rebound, head durability, handle durability, and any other metric you can think of. Keep up the great work!!

@ProjectFarm 6 месяцев назад

Thanks, will do! Thanks for the suggestion.

@drscopeify 6 месяцев назад

That is a SOLID idea I have some that the head gets smushed or mushrooms, would be a cool test.

@dylanlatimer6745 6 месяцев назад

@@drscopeify yeah I've been pretty satisfied with the Trusty Cook hammers, but they're the only ones I've ever owned. All the tool junkies swear that nothing is better than Snap On and all the DIYers swear by Tekton so I'd love to see how they stack up.

@ritzoner11 2 месяца назад

Thanks for the info you give and the test you do not just price, but durability and also the what they proclaim to advertise. Makes shopping more easier. Keep up the good work man

@ProjectFarm 2 месяца назад

Thank you!

@jjducreux 6 месяцев назад

I do most of the work around the house and cars myself, and since I found this channel years ago I have been using it as a reference to what tools and products to buy before heading to the store or ordering online. Thank you, sir.

@ProjectFarm 6 месяцев назад

You are welcome!

@WellbeWelloff 6 месяцев назад

As an owner of snap on ratchets, I will say they are definitely strong, i was able to lift myself up with a drain plug and my ratchet didn't even care. As far as being oily, I've never struggled to flip the reverse switch on mine. A great video, I can't wait for the next round!

@eric63377 6 месяцев назад

I second this.

@ProjectFarm 6 месяцев назад

Thanks!

@MrArcticPOWER 6 месяцев назад

@@rogerstlaurent8704 Or buy GearWrench and don't cry at all? The only "Pro" thing about Snap-on or Mac is the price tag.

@dad1432 6 месяцев назад

I'm impressed that you, as a cat, use tools and have excellent communication skills.

@ghostdog662 6 месяцев назад

I find the resistance to switch between lock/unlock is better if it is tough to move. As the item wears it will become easier and often can switch direction while ratcheting.

@rodgood 6 месяцев назад

yes a ratchet that reverses direction unknowingly is very annoying .

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@cousinron 6 месяцев назад

I have the Wera, and while it may not be perfect, I love it. It's very versatile and I use it in lots of odd circumstances. Being able to use it like a ratcheting screwdriver is great too

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@bantolphbantir9605 6 месяцев назад

I don't think the Wera belonged in this test. The design is radically different than the others and fits a different purpose. BTW, I have three variants of the Wera.

@taylorwhedon9486 6 месяцев назад

Super true. It’s called a roto head ratchet. They’re my favorite. All of the companies on this list make that style as well. They just don’t have the locking mechanism. It’s not super important though since the torque passes through the center of the head rather than through an off centered joint.

@dyer2cycle 6 месяцев назад

Yes, that is another reason I much prefer roto-heads to flex heads..I have some flex heads, but I rarely use them...they usually wind up frustrating me more than anything...clearance issues, flopping around, wobbling off the fastener...I usually wind up tossing them away in frustration and getting out my roto-heads...I don't care for flex-head ratcheting wrenches for the same reasons...

@rcannon409 6 месяцев назад

I like wera 1/4" tools for my motorcycle. Low torque on most fittings and the compact, short size has advantages, too.

@66mymouse 2 месяца назад

As always your videos are very informative. And I love the depth you go to test everything

@ProjectFarm 2 месяца назад

Thanks!

@TheBallsHaveEYES 6 месяцев назад

I've got a couple test ideas. 1. Pipe cutters. Either the ratcheting cutters for PVC, or the clamp style with the cutting wheel. 2. This might be too expensive to be practical, but I would absolutely love a video on rotary cutters. I bought a 5' County Line from tractor supply around 2 years ago, and a lot of the time I feel like I should've spent extra for a Woods or Bush hog, but I've never actually run either of them. Love your videos!

@TehButterflyEffect 6 месяцев назад

I used to build the County Line brush cutters. There's nothing really wrong with them but they could use more bracing.

@ProjectFarm 6 месяцев назад

Thanks for the suggestion.

@iownmaddd 6 месяцев назад

Thanks to project farm I’ll never have to suffer from buying inadequate tools or products. A million thanks!!!

@ProjectFarm 6 месяцев назад

You are welcome! Positive feedback like yours is highly motivating to keep on reviewing products!

@chrisunderhill8853 3 месяца назад

Amazing work. The test you provide is very worth the time. Thanks so much!

@ProjectFarm 2 месяца назад

Thanks and you are welcome!

@jeffclarke5497 6 месяцев назад

Love your experimental setups. I really wish I had had your help in some of my labs in the past. Keep up the good work!

@ProjectFarm 6 месяцев назад

Thank you for the feedback!

@drockshobbiesandcr7055 6 месяцев назад

I really like my Icon Flex head, it’s affordable and tough. It’s served all my needs perfectly.

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@andreaseckert8683 6 месяцев назад

Great video as always. I specially enjoy your handtool reviews. When it comes to ratchets, there is just one rating system, which I do not fully agree with personally. When it comes to the force needed to change direction, lighter is not always better in my eyes. I remember several situations, where on hard to reach places, my ratchet changed direction due to a too light direction switch. So when I change direction, I prefer that it stays like it is and not accidently changes on its own even if that means more force need to be applied with my finger. Keep up the good work!

@lukem7203 6 месяцев назад

Very good point. I think the back drag test is the other I don't fully agree with. Not because I don't think it's important, I just think it's something that changes considerably as a ratchet gets used and breaks in. Some of the quality ratchets didn't do well with this test but likely because they are more precise fit and will loosen up when used a while.

@ProjectFarm 6 месяцев назад

Thanks, will do!

@glock30fotyfive 6 месяцев назад

Another excellent video. You are doing a great unbiased review/testing. Actually, your testing of any product is amazing and beyond any review service out there. People, do not rely on the internet, nearly all write-ups are biased. They will appear to be unbiased, but that's the point...to guide you to a certain product they are peddling. This man's videos are the best source as you get to see the testing in real time. Thank you for that!

@ProjectFarm 6 месяцев назад

Thank you!

@strykerls3740 6 месяцев назад

The video I been waiting to see! Awesome videos! Great tests and real life scenarios of usage. Been so busy with life I didn’t notice you uploaded! Even on tools I do not use in my trade I always watch. Whenever it comes to really tight spaces I just use my converted 1/4 bodies to 3/8 anvils and it does wonders! Was hoping to see matco.

@ProjectFarm 6 месяцев назад

Thanks! Thanks for the suggestion.

@_Makanko_ 6 месяцев назад

You and your team continue to be an improving force on the world of tools and appliances besides giving consumers great advice or direction. It is very much appreciated! Have a great week

@ProjectFarm 6 месяцев назад

Thanks!

@dejen3303 6 месяцев назад

I have the Snap On version that I purchased about 40 years ago. It broke after a few years and it was repaired upgrading the single pawl with a dual pawl. Never failed again. I don't use it much anymore, maybe every few months if that, but it sure is valuable when needed.

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@Enigma-Sapiens 6 месяцев назад

Great video, subject, testing, and commentary, Thanks, Todd! I have an ancient (over 40 years old) no-name, made-in-Taiwan flex head ratchet that has been abused all its life. It's still in one piece and working to this day.

@ProjectFarm 6 месяцев назад

Thanks and you are welcome! Thanks for sharing.

@rottiuree 5 месяцев назад

I always look forward to your reviews. All excellently done. Thanks for helping pros and diy er's alike pick the right tools

@ProjectFarm 5 месяцев назад

Thanks and you are welcome!

@Nanan00 6 месяцев назад

The gearwrench and tekton rachets have very stable detents on the angle head which is quite useful when trying to get into tight areas with an extension and socket where the Icon head is floppy with weight on it.

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@mediocreman2 6 месяцев назад

My Gearwrench flex head flops around like an overcooked piece of spaghetti and it has always been that way. Okay I'm exaggerating, but I hate to use it because of how sloppy it is.

@johnlucier5654 2 месяца назад

Arent there screws you can tighten?

@vgman94 6 месяцев назад

Despite some drawbacks, the Craftsman and the Wera impressed me. They outcompeted in many areas that I felt were pertinent.

@canucha1985 6 месяцев назад

Agreed. The Craftsman one impressed me. Wasn't expecting it to perform as well as it did.

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@cynot71 6 месяцев назад

I own the Gearwrench and the Wera. I keep the Gearwrench in my truck and the Wera in the house. I know how to use my tools, so the drawbacks on the Wera isn't really a problem.

@rogerstlaurent8704 6 месяцев назад

Also have to agree about the Craftsman hopefully that might be a comeback to good quality tools ??? For the Duratech or Duracrap just walk away from that tool brand

@jasonhill2180 6 месяцев назад

In the back drag category, Craftsman was nearly last. That's important in tight spaces where you can't get your hand in there to hold it. A deal breaker for me.

@projectej8111 Месяц назад

Your hard work and dedication deserves more. Keep up the good work, and thank you.

@ProjectFarm Месяц назад

Thanks!

@fimbl 3 месяца назад

so sorry to hear about your cat, appreciate you putting this video out there. lots of good info in here, hopefully gonna make it out this year

@uglyhandgarage2927 6 месяцев назад

Great video... We need you to test different 1500 w heaters and find out once and for all if some actually produce more heating capabilities or if 1500w is 1500w no matter what!!

@ProjectFarm 6 месяцев назад

Thank you for the video idea!

@colbster12302 6 месяцев назад

yeah for real. i buy them all the time for work and they either don't get very hot or they quickly stop working from steel shop dust exposure.

@andrewwmacfadyen6958 6 месяцев назад

From actual real world experience I found wrenches similar the Wera gimbal type style are more practical and safer to use because they are much less likely to tip off the bolt or nut head.

@TCPUDPATM 6 месяцев назад

There’s no need to test that. Physics guarantees that :) (To clarify- If it takes 1500W from the wall, it comes out as heat. It may not use 1500W, but that’s a diff story). Efficiency is a completely moot point as they are essentially 100% INefficient.

@rodcleve 6 месяцев назад

@@ProjectFarm Yes winter time and heater videos are very helpful.

@CarpeDiem601 6 месяцев назад

I’m not sure anyone realizes or appreciates just how incredible you are and just how detailed and organized you must be to produce these amazing videos!!! Very impressive!!

@ProjectFarm 6 месяцев назад

Thanks!

@joshuabutler2248 6 месяцев назад

I’m with this guy! I would love to see a video about how you make your videos. A kind of behind the scenes of everything.

@Mike-sy6oy 6 месяцев назад

This comment is sort of annoying. Apologies for my call out. But like, yeah totally nobody among his millions of viewers realizes or appreciates Todd's testing... Come on man grow up and quit riding his nuts. Todd's amazing. No need for superfluously hyperbolic comments. all they do is cheapen everything he works towards

@CarpeDiem601 6 месяцев назад

@@Mike-sy6oyThis is one of those “better to not say anything” momenta your parents should have taught you about growing up. Let me compliment the guy. Jeez. ✌🏼

@Mazorzarch 6 месяцев назад

@Mike-sy6oy Looks like somebody didn't get their "atta boy" pat on the back today, and felt like simultaneously lashing out and talking about nuts at the same time. Odd choice. Go touch grass.

@themrdominic1 4 месяца назад

I watch this guy before I buy ANY tool. Thank you for all the testing and graphs you make. Really helps me decide what I wanna buy

@ProjectFarm 4 месяца назад

Thanks and you are welcome! Glad to hear!

@anneoreilly4900 3 месяца назад

Same, makes it easy for DIY to Pro to get the best product balancing needs and cost.

@davidp419 6 месяцев назад

Having a quick release socket option is so important to me. Sometimes the ratchet won't let go of the socket very easily. Would've liked to have seen that test.

@ProjectFarm 6 месяцев назад

Thanks for the suggestion.

@se4000 6 месяцев назад

Yea. I've been using my managers snap on locking flex until I move my box into the shop next week. The socket is super hard to remove from the S-O. On my MAC flex it comes off easy in all conditions, even greasy hands. The S-O I have to use a flat head to pry them off sometimes, especially with grease.

@kenbrown2540 6 месяцев назад

I dream of a day when your channel is so successful that you can test equipment. "Today, we're going to find out which backhoe is best!"

@ProjectFarm 6 месяцев назад

That would be awesome!

@1pcfred 6 месяцев назад

Case Construction King is the best. Just don't get the AC option. It always leaks. Although maybe they've fixed that now?

@mrfordman9999 6 месяцев назад

Such a fantastic test. Clean and mean. No apologies for speaking the truth. Your dedication to honest and fair reviews is UNSURPASSED!

@gregkimura5906 6 месяцев назад

I don't own one of these, but I like the idea of how they work and what they can do. I appreciate the time and effort to make these videos. The information is valuable and I've used your tests to make better purchases. Thank you!

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@garywinkel1831 6 месяцев назад

Another great video! I bought a Duralast flex head ratchet about 10 years ago and use the heck out of it, it's been great. Your testing is fantastic.

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@MrAndrewClaycomb 6 месяцев назад

It would be helpful to test the durability of the finishes as well. I have a couple of icon ratchets along with a handful of other cheap brands, and the 1/2” icon has started rusting with almost no use. It’s the only one in my collection to do that.

@lumpofnicoal8381 6 месяцев назад

Warranty that sucker cause the plating shouldn’t be that bad, even for Hf

@marko11kram 6 месяцев назад

That would be a good test to include

@kittytrail 6 месяцев назад

@@lumpofnicoal8381 does HF even pay their OEMs for that kind of quality control? 😏

@deedle6073 6 месяцев назад

Just snap it and take it back for a new one.

@ProjectFarm 6 месяцев назад

Thanks for the suggestion.

@GumbootsOnBackwards 6 месяцев назад

I've got an Olsa swivel head ratchet. It's amazing! I was worried it wouldn't hold up well to torque, but this thing is a beast.

@ProjectFarm 6 месяцев назад

Great feedback on the Olsa Tools and very good purchase decision. They've built the ratchet to beat and I'm hoping that the other manufacturers work to improve the design of their ratchets. Competition is great for consumers!!

@aidenstefanson2175 6 месяцев назад

The Olsa is identical to the SK SP90s. I had a 1/4 and 3/8s flex-heads, and didn't get the 1/2 before SK overhauled itself for the worse. The Olsa has completed the set and its the same in every way (aside from logo) @@ProjectFarm

@GumbootsOnBackwards 6 месяцев назад

@@ProjectFarm I'm always happy to support American made. When I need to replace the rest of my ratchets, Olsa will be my choice.

@lukewozniak5616 3 месяца назад

Please keep these ratchet videos coming. They are my absolute favorite tests. I bought the Cresent flex head after how well the standard model did in the previous test. Kinda surprised that it didn't perform that well. It does feel cheap though.

@ProjectFarm 3 месяца назад

Thanks for the feedback.

@mikefisc9989 4 месяца назад

My Olsa flex head ratchets were the first products that I ever bought from Olsa Tools. I have been extremely happy with them. Glad to see they performed as well as they did against the other brands. Thank you for performing this product test.

@ProjectFarm 4 месяца назад

You are welcome! Thanks for the feedback.

@doctordiesel5467 2 месяца назад

The olsa usa ratchets seem to be built by sk

@bondovwvw 6 месяцев назад

I use the icon every day at work. It's been great. I had the Allen screw get loose and fall out. I lost the Allen on the shop floor. I took it back and got a new one exchanged.

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@u9Nails 6 месяцев назад

This is my introduction to Olsa. And I'm impressed with the performance! It always hurts when tools meet the early end of life. But that is critical data! We want strength in our tools. It can save a knuckle from time to time.

@djsi38t 6 месяцев назад

Thing is you will never need a ratchet to be able to withstand anything over 200 ft pounds and most of the time 100 ft pounds is plenty..Breaker bars are for extra tight fasteners,not ratchets.

@corysavage609 6 месяцев назад

Hi, How are you doing today? I am doing pretty good myself. I would like to say thank-you for getting to another one on my video ideas. Love all the great work and the great information that you have provided us. I would like to see you try testing: easy outs to find out which manufacturers are the best. I hope that you and your family take care until next time.

@ProjectFarm 6 месяцев назад

You are welcome! Thanks for suggesting the video idea.

@karstenalbers2255 25 дней назад

I just recently got a flex head snap-on ratchet at a yard sale and came to see how it held up, great review as always!

@ProjectFarm 24 дня назад

Thanks!

@_Caddac 6 месяцев назад

Saved my Sunday, always love a PJ upload. I've got a Mastercraft (Canadian brand) flex head and it's fantastic. Such a useful tool in tight spots.

@ProjectFarm 6 месяцев назад

Thank you very much!

@rp42069 6 месяцев назад

Thanks for all you test for us!

@ProjectFarm 6 месяцев назад

My pleasure!

@cliffelmore5834 6 месяцев назад

Great review. Thank you for your time and effort.

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@Formerlywarmer 6 месяцев назад

Excellent review/test. I have the snap on and more recently bought the Icon. They are both good tools but for the cost saving I’ll be buying more icon in the future being I’m just a novice mechanic. Thanks for your efforts in all these test. I keep a log book of ur test as a quick reference wen buying something I don’t already have experience with.

@ProjectFarm 6 месяцев назад

Thanks! Thanks for the feedback.

@sandmaker 6 месяцев назад

I am always amazed by the amount of information you generate per show. Wow. A great big thanks for doing it. I hope you had a little fun along the way.

@ProjectFarm 6 месяцев назад

Thank you!

@TheGreatChrisB 6 месяцев назад

I think the thing that sets the Wera apart and makes it hands down the best for some people is that it's the only one that can truly go vertical. So it needs the smallest space 360° around the bolt. The others need upwards of 2"+ in at least 180° around a bolt

@lakinnenlako6883 6 месяцев назад

Agree, vertical drive, great grip and good quality for not so much money!

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@spikester 6 месяцев назад

Love those Wera ratchets so much that i got the 3 most popular sizes. Do like the colour coded sockets too. Otherwise high quality stuff you buy once, unless it gets stolen heh.

@harpintn 6 месяцев назад

When you need to go vertical you use extensions. They are available in many lengths. You can also get universal joints to help you get into tight spaces.

@ions82 6 месяцев назад

Wera ratchets are my daily drivers. Having the pivot right at the axis of rotation makes a difference in how much torque you can get into the fastener. And, as mentioned, being able to pivot in line with the fastener can be a handy feature (acting as a sort of ratcheting screwdriver.)

@quasimage7795 6 месяцев назад

Enjoy watching your videos over the years. You do an awesome job with your tests and I wish you continued you success! I have purchased items based on your reviews, thanks again!

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@Mark_Joslin 6 месяцев назад

Very informative. Thank you.

@ProjectFarm 6 месяцев назад

You are welcome!

@FryChicken 6 месяцев назад

I got the Wera ratchet convinced it would be a gimmick, but curious about the shiny colors. I now find myself constantly reaching for it over my OG USA Craftsman ratchets.

@ProjectFarm 6 месяцев назад

Thanks for sharing.

@dyer2cycle 6 месяцев назад

OG USA Craftsman ratchets never really were anything to write home about..generally quite strong and good metal, but usually sloppy tolerances in the mechanisms and the ergonomics on most were quite bad...

@GregBadabinski 6 месяцев назад

I have the Wera ratchet and I've been really pleased with it. I don't have to deal with super tight confines, but I often need the angle adjustment. I really like the low back drag! Probably not the best choice for someone wrenching on cars though, that handle is definitely very large. EDIT: I use mine in a machine shop, where you sometimes need to get a bit creative with fixturing.

@cablenowadays6586 6 месяцев назад

I do HVAC and i that ratchet with the shallow sockets. It’s pretty handy but i rarely use it after i got the klein flip socket that go in my impact

@zygmuntthecacaokakistocrat6589 6 месяцев назад

I'm a bike and small engine mechanic, and it is my most used socket tool.

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@drscopeify 6 месяцев назад

I have 8 different ratchets from different companies, lengths, sizes, it's always good to have long handles too so you can reach deep inside the car, behind dashboard makes life soooo easy. I get them on eBay mostly.

@Therob10203 6 месяцев назад

Never disappointed with any of your videos, well done. Thorough testing and testing the important factors of any tools. If you ever want to do more ratchet testing in the future, I’d be interested in seeing KoKen tested, it’s another brand from Japan like Nepros.

@ProjectFarm 6 месяцев назад

Thanks! Thanks for the suggestion.

@douglasmayherjr.5733 6 месяцев назад

Great Test. I’m amazed how much information you can get into a 15 minute video. Thanks for the Videos. I appreciate what you do.

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@mediocreman2 6 месяцев назад

Good comparison. I would actually suggest that a direction switch that is too easy to flip is more of a problem that one that is too hard to flip. I've actually never had a ratchet that I couldn't flip the switch on easily enough, but I've had several ratchets that have caught on something nearby while working and have changed direction unbeknownst to me. Also seems like Craftsman is trying to claw it's way back up to being half decent again. Another good test would have been how easy/hard it is to remove a socket. Sometimes with slick hands/gloves, I'll have to get a screwdriver to pop off a socket. One thing you didn't mention is that the locking mechanism for the position of the ratchet can be a real help! And you also didn't mention how easy it was to change positions on the ratchets, although you did show the movement. A ratchet that changes position easily is horrible to work with. You're constantly having to reposition the angle because of this. I hate my Gearwrench flex head ratchet because of this. It's way too easy to move.

@ProjectFarm 6 месяцев назад

Thanks! Thanks for the constructive feedback.

@jonny4984 6 месяцев назад

It strikes me that with the back drag test, the back drag will probably be high since the ratchets are new. An interesting test would be to break in the ratchet (perhaps spinning it against the back drag on a drill for a few minutes) and see if they loosen up a little bit. A tool that starts out "too tight" might end up just right after a bit of use, while one that starts out "just right" might end up too loose after break in. Thanks for the great reviews!

@1pcfred 6 месяцев назад

A lot of tools don't even come lubed right from the factory. I've found that putting decent grease into a ratchet turns even crappy ones into premium feeling tools. If it has really tinny clicks it needs to be lubed.

@kennethmorgan2704 3 месяца назад

Love to watch your comparisons....

@ProjectFarm 3 месяца назад

Thanks!

@jayteejohnson4409 6 месяцев назад

I am not surprised that the MAC ratchet failed under load so soon. I had one a few years ago and got tired ofnit keep breaking on me everytime i try to break a stubborn bolt. I switch to an walmart brand and to my surprise it held up pretty good for over three years until i broke it by putting an impact on it. Now I used the Snap-On ratchet and so far its holding up wonderfully. And this test proved it. Thank you PF ❤ for this demonstration

@ProjectFarm 6 месяцев назад

You are welcome! Thanks for the feedback.

@nathankisner8332 4 месяца назад

Yep I just had this conversation at work. Every mechanic brought out a 3/8 Mac ratchet they love, but all were broken. Teeth stripped out. Ive beat hard on my Mac 3/4" with no issues. ratchets are like pussy, they all good, but there is one you always crawl back to.

@HR66590 6 месяцев назад

Something to add to the testing process is the manufacturer’s customer service if they’re willing to replace the broken ratchets or not, rate them based on how difficult it is for them to honor the warranty be it no questions asked or if they give you the runaround or out right reject the warranty replacement

@dixiewishbone5582 6 месяцев назад

Well noted, I agree 100%!!! If the mfg. will not offer a warranty or replacement of any kind they may not have a lot of confidence in their own product. - But of course that also opens the door to abuse and dishonesty! S. Carolina

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@1pcfred 6 месяцев назад

Used properly tools don't tend to break. If you break stuff or wear it out then you should repair or replace it. Otherwise you're just a burden on society. Unless it is a legitimate manufacturing defect. But in my experience that happening is rare.

@aaronthomas6155 Месяц назад

@@1pcfred I've had the same Mac 1/4" drive ratchet strip out 3 times and been forced to finish the job with an ICON 1/4" drive ratchet. When used in a professional environment, tools break.... And for the record, the torque on the bolt that stripped out the Mac ratchet, was less than 5ft/lbs.

@1pcfred Месяц назад

@@aaronthomas6155 you'd think the tool could handle that. Perhaps MAC doesn't make the best 1/4" ratchet drives? If I had a tool fail multiple times on me I'd be looking for some other tool. It could just be a maintenance issue though? You'll see Oil Daily stamped on every Snap-On ratchet drive.

@nismo2070 6 месяцев назад

I use my 3/8" and 1/4" ratchets to earn a living. I've been weaning myself off of the tool trucks the last few years. I have been very pleasantly surprised by the durability of the Icon ratchets I own. I've been an auto tech for 30+ years and I still have original American made Craftsman stuff that I use. As always, GREAT video!!!! Keep them coming!

@ProjectFarm 6 месяцев назад

Thanks, will do!

@MrPoppyDuck 6 месяцев назад

Watching destructive tool testing is always interesting. Great informative video! Thanks for helpful info!

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@TheNucMed 6 месяцев назад

Great video. You covered the situations a mechanic will encounter. Well done. Finally settled the score on who makes the most durable flex head and can take whatever we throw at it. Was very surprised at the weakness of the Mac. Thanks.

@ProjectFarm 6 месяцев назад

Thanks!

@happyhome41 6 месяцев назад

LOVE these videos. SO useful, SO well constructed, SO well delivered. Ratchet ordered. Three MILLION subscribers - CONGRATULATIONS.

@ProjectFarm 6 месяцев назад

Thank you!

@bobjones37450 6 месяцев назад

Im a big fan of the channel and your unbiased real world test. I have used your results several times when making purchases. Thank you for taking the time to test all these products

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@thedevildick1 6 месяцев назад

Your presentations are the high point of my weekend, thanks Todd! Awesome video, can't wait to see the part two cummins video.

@ProjectFarm 6 месяцев назад

Thanks !

@zakaryschall2836 6 месяцев назад

I always love the hand tool reviews. And waiting for a socket testing video. Good job keep it up!

@ProjectFarm 6 месяцев назад

Thanks, will do! Thanks for the suggestion.

@GMC.Sprint 6 месяцев назад

Socket removal force weeks be a nice additional category. I like having a socket release button. It's annoying when sockets get stuck inside a tight storage, out are too hard to pull off the ratchet.

@heavenleigh111 6 месяцев назад

Definitely this!!!

@ChrisVargasrpht2000chris 6 месяцев назад

I am also happy to hear that manufacturers are reaching out and listening to help improve their products.

@ProjectFarm 6 месяцев назад

Thanks for the feedback.

@adamsgarage101 Месяц назад

I enjoyed this video I work on cars a lot and a good flex head is a must I always watch your videos to see what tool is the best I really enjoy your videos you really help me out a lot when I need to buy a tools.

@ProjectFarm Месяц назад

Thanks!

@FD-dh2fu 6 месяцев назад

Awesome as always. Thank you.

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@chapinsolitario1980 6 месяцев назад

Good morning everyone !!! Have a great Sunday!!!!!

@ProjectFarm 6 месяцев назад

Good morning!

@4rdF1Hunny 6 месяцев назад

Glad to see craftsman still making good tools even after their change of ownership.

@1pcfred 6 месяцев назад

Craftsman is a brand they don't really make anything. They put their branding on tools others make.

@ProjectFarm 6 месяцев назад

Thank you for sharing!

@harpintn 6 месяцев назад

@@1pcfred True, but the Craftsman tools are made to their specifications and quality standards. That is true of many of the products you buy and use every day.

@teamdada2194 6 месяцев назад

You’re watching a tool video so I assume you know Craftsman is junk right?

@harpintn 6 месяцев назад

@@teamdada2194 Craftsman hand tools are better than most of what is available in retail outlets. Now if you want to spend 3x the price and buy from a tool truck have at it.

@TheKingBananaX 6 месяцев назад

Based off of these metrics and which ones matter to me, the craftsman is far away my favorite. I don't care about MM of thickness on the head, and I actually prefer my direction switch to be a little stiffer. The stats that matter the most to me are arc swing, and strength. Craftsman was first on both. Great video as always!

@ProjectFarm 6 месяцев назад

Thanks! Thanks for sharing.

@taylorwhedon9486 6 месяцев назад

This result surprised me, and is one of the best answers.

@Trolldaddy5 5 месяцев назад

Back drag is most important. Otherwise, you'll just be turning the bolt back n forth. Arc swing is also important. Strength doesn't really matter bc they all break around the same and are covered under warranty anyhow.

@ihavethedocuments2580 23 дня назад

I'm sure when that ratchet gets use it will break in and be much smoother. People were moaning about the new Snap On 100 tooth that it had to much back drag. Complaining about a Snap On ratchet??? Talk about 1st world problems... crap 😡

@RandomGgames 6 месяцев назад

Independent unbiased research is SO important when it comes to understanding what value/dollar you are paying for and what product may be better or not as good as others. I'm glad to hear tool manufacturers are using you and the comments as a source for improvement. Thank you for doing what you do.

@ProjectFarm 6 месяцев назад

You are welcome!